Photocatalytic Oxidation of CO on TiO2: Chemisorption of O2, CO,and H2

On the surface : Adsorption of O₂ at the surface oxygen vacancy (SOV) sites of TiO₂ reconstructs the lattice oxygen (healing SOVs), resulting in a decrease of the photocatalytic activity of oxidizing CO over vacuum‐pretreated TiO₂ with increasing temperature (see scheme). Adsorption of H₂ produces new SOVs at the TiO₂ surface and stabilizes the photocatalytic activity.

     

H2,CO和H2/CO在ZrO2催化剂上吸附行为研究

用insituFTIR法研究了H₂、CO及CO/H₂在ZrO₂表面的吸附行为.结果表明,H₂在ZrO₂表面吸附存在两种形态的羟基(即ZrOH和ZrOHZr),吸附温度增加,羟基数量增加.CO在200℃易与ZrO₂表面羟基作用形成甲酸盐物种,吸附温度升高时,该物种逐渐分解生成CO和ZrOH.当CO和H₂共存时,表面甲酸盐的量明显增加,并随温度增加,逐渐加氢形成甲氧基,最后生成甲烷.甲氧基的加氢过程较慢,所需反应温度也较高,被认为是CO加氢合成醇的速控步骤.     

Vibrational quasi-degenerate perturbation theory: applications to fermi resonance in CO2, H2CO, and C6H6

A quasi-degenerate perturbation method with vibrational self-consistent field (VSCF) reference wavefunction is developed. It simultaneously accounts for strong anharmonic mode-mode coupling among a few states (static correlation) by a configuration interaction theory and for weak coupling with a vast number of the other states (dynamic correlation) by a perturbation theory. A general formula is derived based on the van Vleck perturbation theory. An algorithm that selects a compact set of the most important VSCF configurations which contribute to the static correlation is proposed and a scheme to limit the number of configurations considered for dynamic correlation is also implemented. This method reproduces the vibrational frequencies of CO2 and H2CO that are subject to the strongest anharmonic mode-mode coupling within 10 cm(-1) of vibrational configuration interaction results in a computational expense reduced by a factor of one to two orders of magnitude. The method also reproduces the infrared absorption of C6H6 in the CH stretching (nu12) frequency region, in which combination tones nu13nu16 and nu2nu13nu18 appear on account of an intensity borrowing from nu12via the anharmonic coupling.     

Diboron Bonds Between BX3 (X=H,F, CH3) and BYZ2 (Y=H,F; Z=CO,N2, CNH)

The ability of B atoms on two different molecules to engage with one another in a noncovalent diboron bond is studied by ab initio calculations. Due to electron donation from its substituents, the trivalent B atom of BYZ₂ (Z=CO, N₂, and CNH; Y=H and F) has the ability to in turn donate charge to the B of a BX₃ molecule (X=H, F, and CH₃), thus forming a B⋅⋅⋅B diboron bond. These bonds are of two different strengths and character. BH(CO)₂ and BH(CNH)₂, and their fluorosubstituted analogues BF(CO)₂ and BF(CNH)₂, engage in a typical noncovalent bond with B(CH₃)₃ and BF₃, with interaction energies in the 3–8 kcal/mol range. Certain other combinations result in a much stronger diboron bond, in the 26–44 kcal/mol range, and with a high degree of covalent character. Bonds of this type occur when BH₃ is added to BH(CO)₂, BH(CNH)₂, BH(N₂)₂, and BF(CO)₂, or in the complexes of BH(N₂)₂ with B(CH₃)₃ and BF₃. The weaker noncovalent bonds are held together by roughly equal electrostatic and dispersion components, complemented by smaller polarization energy, while polarization is primarily responsible for the stronger ones.     

Experiments on the intermediate structure of cardenolides F, H, I, T and U from Glossostelma carsoni (N.E. Br.) Bullock

Physical data and a few chemical reactions have been used to try to elucidate some of the structural features of a few cardenolides which are present in small quantities in the roots of Glossostelma carsoni (N.E. BR .) BULLOCK . The glycoside F is probably a derivative of xysmalogenin-β-D -sarmentoside, whereas fermentative degradation of glycoside U yielded the genin H which was identified through paper chromatography. The genins H, I and T are possibly O-acetyl-cardenolides which, however, do not correspond to any known compounds.     

Design and Syntheses of Three Novel Carbonate Halides: Cs3Pb2(CO3)3I,KBa2(CO3)2F,and RbBa2(CO3)2F

Three new carbonate halides, Cs₃Pb₂(CO₃)₃I, KBa₂(CO₃)₂F and RbBa₂(CO₃)₂F have been synthesized with hydrothermal and solid‐state methods. Cs₃Pb₂(CO₃)₃I is the first product in the lead carbonate iodides family; KBa₂(CO₃)₂F and RbBa₂(CO₃)₂F are the first two centrosymmetric compounds found in the alkaline–alkaline earth carbonate fluorides family. Cs₃Pb₂(CO₃)₃I crystallizes in a centrosymmetric space group C2/m, and exhibits a two‐ dimensional layered structure which is formed by [Cs₄Pb₄(CO₃)₆I₂]_∞ double‐layers consisting of [Pb₂(CO₃)₃I]_∞ single‐layers bridged by the Cs atoms. KBa₂(CO₃)₂F and RbBa₂(CO₃)₂F, which are isostructural, crystallize in a trigonal crystal system with a centric space group of R featuring a honeycomb‐like framework. First principle calculations indicate that Cs₃Pb₂(CO₃)₃I has a moderate birefringence and explain the difference between the band gaps of the title compounds from electron structures. The effects of cations and halogens on the structures and properties of the title compounds are also discussed.     

On the analysis of CO2, H2- and CO,H2-mixtures by water-gas potentiometry with solid electrolyte cells

The potentiometric analysis of CO₂, H₂ and CO, H₂O-mixtures using oxide ion-conducting solid electrolytes requires the adjustment of the water-gas equilibrium without side reactions in the high-temperature galvanic cell. Conventional cell designs suitable for the analysis of H₂, H₂O and CO, CO₂-mixtures are not applicable due to the insufficient gas residence times in the cells and the insufficient catalytical activity of the platinum electrodes. Solid electrolyte cells have to be modified by integrating of suitable catalysts. Under optimized conditions of gas velocity and cell temperature both gas systems can be analyzed only by measuring the cell tension U (=–emf) and temperature in the favorized temperature range around 813°C. Here systematical errors of the component ratio or the mole fraction were smaller than 6%. Several fundamental requirements for the application of catalysts in solid electrolyte cells for the analysis of reactive water-gas mixtures are pointed out.     

Selective oxidation of CO in the presence of H2, H2O and CO2 via gold for use in fuel cells

An Au/Fe2O3 catalyst prepared using a two-stage calcination procedure achieves target conversion and selectivity for the competitive oxidation of dilute CO in the presence of moist excess H2 and CO2.     

Tests of a free-volume model for the permeation of gas mixtures through polymer membranes. CO2-C2H4, CO2-C3H8, and C2H4-C3H8 mixtures in polyethylene

Steady-state permeability coefficients have been measured for equimolar mixtures of CO₂-C₂H₄, CO₂-C₃H₈, and C₂H₄-C₃H₈, as well as for a mixture of 74.9 mol % CO₂ and 25.1 mol % C₂H₄ in polyethylene membranes. The measurements were made at 20, 35, and 50°C and at pressures of up to 28 atm. Each component of the permeating mixtures studied had the effect of increasing the permeability coefficient for the other component. Furthermore, at equal partial pressures and at the same temperature, the component exhibiting the highest solubility in the polymer had the largest effect in increasing the permeability coefficient of the other component. This behavior is in agreement with the predictions of a free-volume model for the permeation of gas mixtures proposed by Fang, Stern, and Frisch. From a quantitative viewpoint, the permeability coefficients for the components of the mixtures agreed, on the average, to better than 25% with the predicted values. The theoretical permeability coefficients can be estimated from the model by using parameters determined with the pure components only.     

Bioactive constituents from Chinese natural medicines. XXII. Absolute structures of new megastigmane glycosides, sedumosides E1, E2, E3, F1, F2, and G, from Sedum sarmentosum (Crassulaceae)

Six new megastigmane glycosides, sedumosides E1, E2, E3, F1, F2, and G, were isolated from the whole plant of Sedum sarmentosum (Crassulaceae). The structures of new constituents including the absolute configuration were elucidated on the basis of chemical and physicochemical evidence.     

Thermodynamics and kinetics of CO2, CO, and H+ binding to the metal centre of CO2 reduction catalysts

In our developing world, carbon dioxide has become one of the most abundant greenhouse gases in the atmosphere. It is a stable, inert, small molecule that continues to present significant challenges toward its chemical activation as a useful carbon end product. This tutorial review describes one approach to the reduction of carbon dioxide to carbon fuels, using cobalt and nickel molecular catalysts, with particular focus on studying the thermodynamics and kinetics of CO(2) binding to metal catalytic sites.