Finite element analysis of thermoelastic field in a rotating FGM circular disk

This study focuses on the finite element analysis of thermoelastic field in a thin circular functionally graded material (FGM) disk subjected to a thermal load and an inertia force due to rotation of the disk. Due to symmetry, the FGM disk is assumed to have exponential variation of material properties in radial direction only. As a result of nonuniform coefficient of thermal expansion (CTE) and nonuniform temperature distribution, the disk experiences an incompatible eigenstrain which is taken into account. Based on the two dimensional thermoelastic theories, the axisymmetric problem is formulated in terms of a second order ordinary differential equation which is solved by finite element method. Some numerical results of thermoelastic field are presented and discussed for an Al₂O₃/Al FGM disk. The analysis of the numerical results reveals that the thermoelastic field in an FGM disk is significantly influenced by temperature distribution profile, radial thickness of the disk, angular speed of the disk, and the inner and outer surface temperature difference, and can be controlled by controlling these parameters.     

Estimation of limit strains in disk-type flywheels made of a compliant elastomeric matrix composite undergoing radial creep

Fiber reinforced elastomeric matrix composites (EMCs) offer several potential advantages for construction of rotors for flywheel energy storage systems. One potential advantage, for safety considerations, is the existence of maximum stresses near the outside radius of thick circumferentially wound EMC disks, which could lead to a desirable self-arresting failure mode at ultimate speeds. Certain unidirectionally reinforced EMCs, however, have been noted to creep readily under the influence of stress transverse to the fibers. In this paper, stress redistribution in a spinning thick disk made of a circumferentially filament wound EMC material on a small rigid hub has been analyzed with the assumption of total radial stress relaxation due to radial creep. It is shown that, following complete relaxation, the circumferential strains and stresses are maximized at the outside radius of the disk. Importantly, the radial tensile strains are three times greater than the circumferential strains at any given radius. Therefore, a unidirectional EMC material system that can safely endure transverse tensile creep strains of at least three times the elastic longitudinal strain capacity of the same material is likely to maintain the theoretically safe failure mode despite complete radial stress relaxation. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000). Translated from Mekhanika Kompozitnykh Materialov, Vol. 31, No. 1, pp. 87–94, January–February, 2000.     

The closed form solutions for axisymmetric modeling of thermal stress due to repetitive pulse laser heating

Repetitive pulse laser heating is increasingly being used in the laser processing industry such as laser welding, laser cutting and laser drilling due to its energy accumulation effect. Modeling of thermo-mechanical coupling effect of repetitive pulse laser heating can enhance the understanding of its thermo physical process. In this paper, an axisymmetric modeling of thermal stress for repetitive pulse laser heating solid materials is introduced, and its closed form solutions are obtained based on a semi-analytical method. The accuracy and efficiency of the closed form solutions are verified by comparison with the existing numerical modeling software based on the finite element method. Distributions of thermal stress for different radial locations, axial locations and duty cycles are calculated, and effects of these parameters on temporal profile of the thermal stress distributions are analyzed. In the region of laser irradiation, three components of thermal stress are all shown as compressive stress. And outside the region of laser irradiation, the hoop component is shown as tensile stress. On the material surface, the change of thermal stresses is very sharp as a result of direct absorption of incident laser energy. With the increasing of the depth, the rises and decreases of thermal stresses become smooth gradually. The duty cycle has a significant effect on the profiles of thermal stresses. In the same conditions, the maximum value of thermal stresses gets higher as the duty cycle decreases. Results of this study can provide some theoretical basis for parameter inversion and optimization of repetitive pulse laser heating, as well as some corresponding experimental research.     

Analytical solution for electromagnetothermoelastic behaviors of a functionally graded piezoelectric hollow cylinder

Analytical study for electromagnetothermoelastic behaviors of a hollow cylinder composed of functionally graded piezoelectric material (FGPM), placed in a uniform magnetic field, subjected to electric, thermal and mechanical loads are presented. For the case that the electric, magnetic, thermal and mechanical properties of the material obey an identical power law in the radial direction, exact solutions for electric displacement, stresses, electric potential and perturbation of magnetic field vector in the FGPM hollow cylinder are determined by using the infinitesimal theory of electromagnetothermoelasticity. Some useful discussions and numerical examples are presented to show the significant influence of material inhomogeneity, and adopting a certain value of the inhomogeneity parameter β and applying suitable electric, thermal and mechanical loads can optimize the FGPM hollow cylindrical structures. This will be of particular importance in modern engineering design.     

Wrinkle-free solutions of circular membrane problems

Axisymmetric deformations of a plane circular membrane subjected to an axial surface load are studied, with prescribed radial stresses or radial displacements at the edge. Considering the small-finite-deflection theory of Föppl-Hencky as well as a simplified version of Reissner's nonlinear theory of thin shells of revolution, the determination of the principal stresses in the membrane is shown to reduce to the solution of a nonlinear second-order ODE. In the Föppl case, the basic equation becomes singular when the membrane edge is free of traction. Nevertheless, existence and uniqueness of nonnegative solutions for zero edge traction is proved in both Föppl and Reissner models. Thereby, a limit curve for the radial displacement at the boundary is induced in the Reissner case, which subdivides the actual parameter range into complementary domains of existence and nonexistence of tensile solutions. The limit curve is studied, analytically and numerically. Finally, a maximum principle is established in order to determine the more restricted subdomain of those parameters which admit wrinkle-free solutions, i.e. solutions governed by a nonnegative radial and circumferential stress component.     

Bending analysis of a functionally graded rotating disk based on the first order shear deformation theory

The theoretical formulation for bending analysis of functionally graded (FG) rotating disks based on first order shear deformation theory (FSDT) is presented. The material properties of the disk are assumed to be graded in the radial direction by a power law distribution of volume fractions of the constituents. New set of equilibrium equations with small deflections are developed. A semi-analytical solution for displacement field is given under three types of boundary conditions applied for solid and annular disks. Results are verified with known results reported in the literature. Also, mechanical responses are compared between homogeneous and FG disks. It is found that the stress couple resultants in a FG solid disk are less than the stress resultants in full-ceramic and full-metal disk. It is observed that the vertical displacements for FG mounted disk with free condition at the outer surface do not occur between the vertical displacements of the full-metal and full-ceramic disk. More specifically, the vertical displacement in a FG mounted disk with free condition at the outer surface can even be greater than vertical displacement in a full-metal disk. It can be concluded from this work that the gradation of the constitutive components is a significant parameter that can influence the mechanical responses of FG disks.     

On rotating circular disks with varying material properties

Taking Young’s modulus, thermal expansion coefficient and density to be the functions of the radial coordinate, a closed form solution of rotating circular disks made of functionally graded materials subjected to a constant angular velocity and a uniform temperature change is proposed in this paper. Excellent agreement with the solution from Mathematica 5.0 indicates the correctness of the proposed closed form solution. Distributions of the radial displacement and stresses in the disks are determined with the proposed approach and how material properties, temperature change, geometric size and different material coefficients affect deformations and stresses is investigated.     

On rotating circular disks with varying material properties

Taking Young’s modulus, thermal expansion coefficient and density to be the functions of the radial coordinate, a closed form solution of rotating circular disks made of functionally graded materials subjected to a constant angular velocity and a uniform temperature change is proposed in this paper. Excellent agreement with the solution from Mathematica 5.0 indicates the correctness of the proposed closed form solution. Distributions of the radial displacement and stresses in the disks are determined with the proposed approach and how material properties, temperature change, geometric size and different material coefficients affect deformations and stresses is investigated.     

An analytical method for magnetothermoelastic analysis of functionally graded hollow cylinders

This paper considers magnetothermoelastic behavior of a functionally graded material (FGM) hollow cylinder, placed in a uniform magnetic field, subjected to thermal and mechanical loads. Exact solutions for stresses and perturbations of the magnetic field vector in FGM hollow cylinders is determined by using the infinitesimal theory of magnetothermoelasticity. Numerical results indicate that the inhomogeneous constants presented in the present study are useful parameters from a design point of view in that it can be tailored for specific applications to control the stress and perturbation of magnetic field vector distributions. This research is helpful for the optimum design annular cylindrical FGM sensors/actuators.     

Thermal vibration analysis of functionally graded shallow spherical caps by introducing a decoupling analytical approach

Due to many applications of spherical shells on a circular planform such as the nose of the plane and spacecraft and caps of pressurized cylindrical tanks, in this article, free vibration analysis of a thin functionally graded shallow spherical cap under a thermal load is considered. A decoupling technique is employed to analytically solve the equations of motion. Introducing some new auxiliary and potential functions as well as using the separation method of variables, the governing equations of the vibrated functionally graded shallow spherical cap were exactly solved. The superiority of the relations is validated by some comparative studies for various types of boundary conditions. Also, thermal buckling phenomenon is considered. Using new different material models, efficiency of the functionally graded materials is investigated when the shell is subjected to a temperature gradient. The effects of various parameters such as radius of curvature, material grading index and thermal gradient are discussed.     

Bending of thick functionally graded plates resting on Winkler–Pasternak elastic foundations

The static response of simply supported functionally graded plates (FGP) subjected to a transverse uniform load (UL) or a sinusoidally distributed load (SL) and resting on an elastic foundation is examined by using a new hyperbolic displacement model. The present theory exactly satisfies the stress boundary conditions on the top and bottom surfaces of the plate. No transverse shear correction factors are needed, because a correct representation of the transverse shear strain is given. The material properties of the plate are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of volume fractions of material constituents. The foundation is modeled as a two-parameter Pasternak-type foundation, or as a Winkler-type one if the second parameter is zero. The equilibrium equations of a functionally graded plate are given based on the hyperbolic shear deformation theory of plates presented. The effects of stiffness and gradient index of the foundation on the mechanical responses of the plates are discussed. It is established that the elastic foundations significantly affect the mechanical behavior of thick functionally graded plates. The numerical results presented in the paper can serve as benchmarks for future analyses of thick functionally graded plates on elastic foundations.     

Investigation on a rotating FGPM circular disk under a coupled hygrothermal field

In this paper, the distributions of the temperature, moisture, displacement and stress of a functionally graded piezoelectric material (FGPM) circular disk rotating around its axis at a constant angular velocity under a coupled hygrothermal field are presented by a numerical method. The material properties of the FGPM circular disk are assumed to vary along the radial coordinate exponentially. First, the coupled hygrothermal field along the radius of a rotating circular disk is achieved by solving the coupled hygrothermal equations, and then the dynamic equilibrium is solved by utilizing the finite difference method. Finally, numerical results show the effects of functionally graded index, inner radius, angular speed and hygrothermal index on the hygrothermal behaviors of the FGPM circular disk. The results can be useful for the optimal design of rotating FGPM circular disks under a coupled hygrothermal field.     

Exact solution of thermal stress problem of an inhomogeneous hygrothermal piezoelectric hollow cylinder

The closed-form exact solution for the hygrothermal response of inhomogeneous piezoelectric hollow cylinders is obtained. The interaction of electric potentials, electric displacement and elastic deformations is presented. The present cylinder is subjected to both a mechanical load and an electric potential. The material properties coefficients of the present cylinder are assumed to be changed in the radial direction by different distribution forms. The field quantities like displacement, stresses and electric potentials in the inhomogeneous piezoelectric cylinders are determined. The significant of influences of material inhomogeneity, initial temperature, final moisture, and the load and electric ratios in the field quantities are investigated. The concluding remarks and suitable discussions are made.     

Effect of the rotation on a non-homogeneous infinite cylinder of orthotropic material

The present investigation is concerned with a study effect of non-homogeneous on the elastic stresses in rotating orthotropic infinite circular cylinder subjected to certain boundary conditions. Closed form stress solutions are obtained for rotating orthotropic cylinder with constant thickness for three cases: (1) a solid cylinder; (2) cylinder mounted on a circular rigid shaft; and (3) cylinder with a circular hole at the center. Analytical expressions for the components of the displacement and the stress in different cases are obtained. The effect of the rotation and non-homogeneity on the displacement and stress are studied. Numerical results are given and illustrated graphically for each case is considered. The effects rotating and non-homogeneity are discussed. Comparisons are made with the results predicted in the presence and absence of rotation.     

Cryogenic mechanical response of multilayer satin weave CFRP composites with cracks

We deal with the thermomechanical response of multilayer satin weave carbon-fiber-reinforced polymer (CFRP) laminates with internal and/or edge cracks and temperature-dependent material properties subjected to tensile loading at cryogenic temperatures. The composite material is assumed to be under the generalized plane strain. Cracks are located in the transverse fiber bundles and extend to the interfaces between two fiber bundles. A finite-element model is employed to study the influence of residual thermal stresses on the mechanical behavior of multilayer CFRP woven laminates with cracks. Numerical calculations are carried out, and Young’s modulus and stress distributions near the crack tip are shown graphically. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 4, pp. 479–492, July–August, 2008.     

Influence of initial stresses on fracture of composite materials containing interacting cracks

Considered in this study are the axially-symmetric problems of fracture of composite materials with interacting cracks, which are subjected to initial (residual) stresses acting along the cracks planes. An analytical approach within the framework of three-dimensional linearized mechanics of solids is used. Two geometric schemes of cracks location are studied: a circular crack is located parallel to the surface of a semi-infinite composite with initial stresses, and two parallel co-axial penny-shaped cracks are contained in an infinite composite material with initial stresses. The cracks are assumed to be under a normal or a radial shear load. Analysis involves reducing the problems to systems of second-kind Fredholm integral equations, where the solutions are identified with harmonic potential functions. Representations of the stress intensity factors near the cracks edges are obtained. These stress intensity factors are influenced by the initial stresses. The presence of the free boundary and the interaction between cracks has a significant effect on the stress intensity factors as well. The parameters of fracture for two types of composites (a laminar composite made of aluminum/boron/silicate glass with epoxy-maleic resin and a carbon/plastic composite with stochastic reinforcement by short ellipsoidal carbon fibers) are analyzed numerically. The dependence of the stress intensity factors on the initial stresses, physical-mechanical parameters of the composites, and the geometric parameters of the problem are investigated.     

正交各向异性圆柱体在轴压作用下的应力场

基于材料体积不可压假设,对轴向压缩作用下圆柱试件在加载面内的环向和径向应力分布进行理论分析,计算结果表明:当试件材料本构为正交各向异性时,环向和径向应力分布为半径的幂函数形式;试件材料为横观各向同性时,环向和径向应力为半径的二次函数.在圆柱试件轴线上环向和径向应力相等,且均具有最大值;试件圆周边界上径向应力为0,环向应力具有极小值.通过最大拉伸应变破坏理论对试件环向应变进行分析,获得了产生环向拉伸破坏时的临界轴向载荷;并采用Hill-蔡强度理论对试件圆周边界上计算得到的应力参量进行描述,得到了轴压作用下圆柱试件的Hill-蔡强度理论表达式,其不仅取决于轴向应力和试件材料的基本力学性能,还与试件轴向变形的应变率及应变率随时间的变化率相关.     

Elastic Analysis of Anisotropic Functionally Graded Rotating Disks With Non-Uniform Thicknesses北大核心CSCD

研究了任意梯度变化的变厚度各向异性转动圆盘的弹性问题.假设圆盘绕刚性轴匀速转动,其材料性能和厚度沿径向任意梯度变化.考虑圆盘在中心转轴处受位移约束,外侧自由,根据各向异性转动圆盘的平衡微分方程,得到关于径向应力的Fredholm积分方程,继而通过对Fredholm积分方程进行数值求解,得到结构的位移场和应力场.对具体梯度变化情况仅需代入相应梯度变化进行求解即可.数值算例部分,通过假设厚度、弹性模量等参数为特殊的幂函数形式,将由Fredholm积分方程求出的数值解与对应的精确解进行对比,以及针对常见的Voigt模型,将由该方法算得的数值解和ANSYS有限元计算结果进行对比,验证了该方法的准确性和精度.其次,针对Voigt模型,重点分析了厚度变化、材料性能梯度参数、各向异性度等对应力场和位移场的影响.提出了针对材料性能和厚度沿径向呈任意梯度变化的圆盘结构弹性分析方法,将为优化功能梯度圆盘的结构和材料参数、有效调整构件应力分布、提高结构安全性,提供强有力的工具;算例分析结果对功能梯度圆盘在复杂条件下的结构安全设计有重要的理论指导意义.     

Finite element evaluation of stresses on closed leaflets of bioprosthetic heart valves with flexible stents

The purpose of this study is to evaluate the influence of stent flexibility on the magnitude and distribution of stresses on the closed leaflets of a porcine bioprosthetic valve. The finite element technique which incorporated large deformation theory has been used in the analysis. Nonlinearities due to geometry, material and pressure dependent boundary conditions are included in the model. An incremental method has been employed in determining the stresses. The pressure was incremented from 0 to 21.3 kPa. Three separate stent flexibilities were considered and this was achieved by modifying the Young's modulus of the stent material. The calculated radial deflections of the tip of the stent post were in agreement with the results of other investigators. The distribution of stresses in the leaflet of a valve mounted on a flexible stent were compared to the stresses in the leaflet of a valve mounted on a rigid stent. Stent flexibility markedly reduced the stresses in the main body of the leaflet in comparison to a rigid stent, but did not affect the magnitude of stresses near commissures.     

LS model on thermal shock problem of generalized magneto-thermoelasticity for an infinitely long annular cylinder with variable thermal conductivity

In the present paper, an estimation is made to investigate the transient phenomena in magneto-thermoelastic model in the context of the theory of generalized thermoelasticity LS model with variable thermal conductivity. FEM is proposed to analyze the problem and obtain the numerical solutions for the displacement, temperature, and radial and hoop stresses. The boundary conditions for the mechanical and Maxwell’s stresses at the internal and outer surfaces is considered. An application of an infinitely long annular cylinder is investigated for the inner surface is traction free and subjected to thermal shock, while the outer surface is traction free and thermally isolated. Finally, the displacement, incremental temperature, the stress components are obtained and then presented graphically.