Formation, characterization, and reactivity of bis(mu-oxo)dinickel(III) complexes supported by a series of bis[2-(2-pyridyl)ethyl]amine ligands.

Bis(mu-oxo)dinickel(III) complexes supported by a series of bis[2-(2-pyridyl)ethyl]amine ligands have been successfully generated by treating the corresponding bis(mu-hydroxo)dinickel(II) complexes or bis(mu-methoxo)dinickel(II) complex with an equimolar amount of H(2)O(2) in acetone at low temperature. The bis(mu-oxo)dinickel(III) complexes exhibit a characteristic UV-vis absorption band at approximately 410 nm and a resonance Raman band at 600-610 cm(-1) that shifted to 570-580 cm(-1) upon (18)O-substitution. Kinetic studies and isotope labeling experiments using (18)O(2) imply the existence of intermediate(s) such as peroxo dinickel(II) in the course of formation of the bis(mu-oxo)dinickel(III) complex. The bis(mu-oxo)dinickel(III) complexes supported by the mononucleating ligands (L1(X) = para-substituted N,N-bis[2-(2-pyridyl)ethyl]-2-phenylethylamine; X = OMe, Me, H, Cl) gradually decompose, leading to benzylic hydroxylation of the ligand side arm (phenethyl group). The kinetics of the ligand hydroxylation process including kinetic deuterium isotope effects (KIE), p-substituent effects (Hammett plot), and activation parameters (Delta H(H)(*) and Delta S(H)(*)) indicate that the bis(muxo)dinickel(III) complex exhibits an ability of hydrogen atom abstraction from the substrate moiety as in the case of the bis(mu-oxo)dicopper(III) complex. Such a reactivity of bis(mu-oxo)dinickel(III) complexes has also been suggested by the observed reactivity toward external substrates such as phenol derivatives and 1,4-cyclohexadiene. The thermal stability of the bis(mu-oxo)dinickel(III) complex is significantly enhanced when the dinucleating ligand with a longer alkyl strap is adopted instead of the mononucleating ligand. In the m-xylyl ligand system, no aromatic ligand hydroxylation occurred, showing a sharp contrast with the reactivity of the (mu-eta(2):eta(2)-peroxo)dicopper(II) complex with the same ligand which induces aromatic ligand hydroxylation via an electrophilic aromatic substitution mechanism. Differences in the structure and reactivity of the active oxygen complexes between the nickel and the copper systems are discussed on the basis of the detailed comparison of these two systems with the same ligand.     

Ligand macrocycle structural effects on copper-dioxygen reactivity

With the goal of understanding how the nature of the tridentate macrocyclic supporting ligand influences the relative stability of isomeric mu-eta 2:eta 2-peroxo- and bis(mu-oxo)dicopper complexes, a comparative study was undertaken of the O2 reactivity of Cu(I) compounds supported by the 10- and 12-membered macrocycles, 1,4,7-R3-1,4,7-triazacyclodecane (R3TACD; R = Me, Bn, iPr) and 1,5,9-triisopropyl-1,5,9-triazacyclododecane (iPr3TACDD). While the 3-coordinate complex [(iPr3TACDD)Cu]SbF6 was unreactive with O2, oxygenation of [(R3TACD)Cu(CH3CN)]X (R = Me or Bn; X = ClO4- or SbF6-) at -80 degrees C yielded bis(mu-oxo) species [(R3TACD)2Cu2(mu O)2]X2 as revealed by UV-vis and resonance Raman spectroscopy. Interestingly, unlike the previously reported system supported by 1,4,7-triisopropyl-1,4,7-triazacyclononane (iPr3TACN), which yielded interconverting mixtures of peroxo and bis(mu-oxo) compounds (Cahoy, J.; Holland, P. L.; Tolman, W. B. Inorg. Chem. 1999, 38, 2161), low-temperature oxygenation of [(iPr3TACD)Cu(CH3CN)]SbF6 in a variety of solvents cleanly yielded a mu-eta 2:eta 2-peroxo product, with no trace of the bis(mu-oxo) isomer. The peroxo complex was characterized by UV-vis and resonance Raman spectroscopy, as well as an X-ray crystal structure (albeit of marginal quality due to disorder problems). Intramolecular attack at the alpha C-H bonds of the substituents was indicated as the primary decomposition pathway of the oxygenated compounds through examination of the decay kinetics and the reaction products, which included bis(mu-hydroxo)- and mu-carbonato-dicopper complexes that were characterized by X-ray diffraction. A rationale for the varying results of the oxygenation reactions was provided by analysis of (a) the X-ray crystal structures and electrochemical behavior of the Cu(I) precursors and (b) the results of theoretical calculations of the complete oxygenated complexes, including all ligand atoms, using combined quantum chemical/molecular mechanics (integrated molecular orbital molecular mechanics, IMOMM) methods. The size of the ligand substituents was shown to be a key factor in controlling the relative stabilities of the peroxo and bis(mu-oxo) forms, and the nature of this influence was shown by both theory and experiment to depend on the ligand macrocycle ring size.     

Fine-tuning of copper(I)-dioxygen reactivity by 2-(2-pyridyl)ethylamine bidentate ligands

Copper(I)-dioxygen reactivity has been examined using a series of 2-(2-pyridyl)ethylamine bidentate ligands (R1)Py1(R2,R3). The bidentate ligand with the methyl substituent on the pyridine nucleus (Me)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(6-methylpyridin-2-yl)ethylamine) predominantly provided a (mu-eta(2):eta(2)-peroxo)dicopper(II) complex, while the bidentate ligand without the 6-methyl group (H)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(2-pyridyl)ethylamine) afforded a bis(mu-oxo)dicopper(III) complex under the same experimental conditions. Both Cu(2)O(2) complexes gradually decompose, leading to oxidative N-dealkylation reaction of the benzyl group. Detailed kinetic analysis has revealed that the bis(mu-oxo)dicopper(III) complex is the common reactive intermediate in both cases and that O[bond]O bond homolysis of the peroxo complex is the rate-determining step in the former case with (Me)Py1(Et,Bz). On the other hand, the copper(I) complex supported by the bidentate ligand with the smallest N-alkyl group ((H)Py1(Me,Me), N,N-dimethyl-2-(2-pyridyl)ethylamine) reacts with molecular oxygen in a 3:1 ratio in acetone at a low temperature to give a mixed-valence trinuclear copper(II, II, III) complex with two mu(3)-oxo bridges, the UV-vis spectrum of which is very close to that of an active oxygen intermediate of lacase. Detailed spectroscopic analysis on the oxygenation reaction at different concentrations has indicated that a bis(mu-oxo)dicopper(III) complex is the precursor for the formation of trinuclear copper complex. In the reaction with 2,4-di-tert-butylphenol (DBP), the trinuclear copper(II, II, III) complex acts as a two-electron oxidant to produce an equimolar amount of the C[bond]C coupling dimer of DBP (3,5,3',5'-tetra-tert-butyl-biphenyl-2,2'-diol) and a bis(mu-hydroxo)dicopper(II) complex. Kinetic analysis has shown that the reaction consists of two distinct steps, where the first step involves a binding of DBP to the trinuclear complex to give a certain intermediate that further reacts with the second molecule of DBP to give another intermediate, from which the final products are released. Steric and/or electronic effects of the 6-methyl group and the N-alkyl substituents of the bidentate ligands on the copper(I)-dioxygen reactivity have been discussed.     

Ligand effect on reversible conversion between copper(I) and bis(mu-oxo)dicopper(III) complex with a sterically hindered tetradentate tripodal ligand and monooxygenase activity of bis(mu-oxo)dicopper(III) complex

A new sterically hindered tetradentate tripodal ligand (Me2-etpy) and its labeled analogue having deuterated methylene groups (d4-Me2-etpy) were synthesized, where Me2-etpy is bis(6-methyl-2-pyridylmethyl)(2-pyridylethyl)amine. Copper(I) complexes [Cu(Me2-etpy or d4-Me2-etpy)]+ (1 and 1-d4, respectively) reacted with dioxygen at -80 degrees C in acetone to give bis(mu-oxo)dicopper(III) complexes [Cu2(O)2(Me2-etpy or d4-Me2-etpy)2](2+) (1-oxo and 1-d4-oxo, respectively), the latter of which was crystallographically characterized. Unlike a bis(mu-oxo)dicopper(III) complex with a closely related Me2-tpa ligand having a 2-pyridylmethyl pendant, 1-oxo possessing a 2-pyridylethyl pendant is not fully formed even under 1 atm of O2 at -80 degrees C and is very reactive toward the oxidation of the supporting ligand. Thermal decomposition of 1-oxo gave an N-dealkylated ligand in yield approximately 80% based on a dimer and a corresponding aldehyde. The deuterated ligand d4-Me2-etpy greatly stabilizes the bis(mu-oxo)dicopper(III) complex 1-d4-oxo, indicating that the rate determining step of the N-dealkylation is the C-H bond cleavage from the methylene group. The reversible conversion between 1-d4 and 1-d4-oxo in acetone is dependent on the temperature, and the thermodynamic parameters (DeltaH and DeltaS) of the equilibrium were determined to be -53 +/- 2 kJ mol(-1) and -187 +/- 10 J mol(-1) K(-1), respectively. The effect of the 2-pyridylethyl pendant in comparison with the 2-pyridylmethyl and 6-methyl-2-pyridylmethyl pendants on the physicochemical properties of the copper(I) and bis(mu-oxo)dicopper(III) species is discussed.     

Copper dioxygen adducts: formation of bis(mu-oxo)dicopper(III) versus (mu-1,2)Peroxodicopper(II) complexes with small changes in one pyridyl-ligand substituent

The preference for the formation of a particular Cu 2O 2 isomer coming from (ligand)-Cu (I)/O 2 reactivity can be regulated with the steric demands of a TMPA (tris(2-pyridylmethyl)amine) derived ligand possessing 6-pyridyl substituents on one of the three donor groups of the tripodal tetradentate ligand. When this substituent is an -XHR group (X = N or C) the traditional Cu (I)/O 2 adduct forms a (mu-1,2)peroxodicopper(II) species ( A). However, when the substituent is the slightly bulkier XR 2 moiety {aryl or NR 2 (R not equal H)}, a bis(mu-oxo)dicopper(III) structure ( C) is favored. The reactivity of one of the bis(mu-oxo)dicopper(III) species, [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) (6tbp = (6- (t)Bu-phenyl-2-pyridylmethyl)bis(2-pyridylmethyl)amine), was probed, and for the first time, exogenous toluene or ethylbenzene hydrocarbon oxygenation reactions were observed. Typical monooxygenase chemistry occurred: the benzaldehyde product includes an 18-O atom for toluene/ 7- (1) (8)O 2 reactivity, and a H-atom abstraction by 7-O 2 is apparent from study of its reactions with ArOH substrates, as well as the determination of k H/ k D approximately 7 in the toluene oxygenation (i.e., PhCH 3 vs PhCD 3 substrates). Proposed courses of reaction are presented, including the possible involvement of PhCH 2OO (*) and its subsequent reaction with copper(I) complex, the latter derived from dynamic solution behavior of 7-O 2 . External TMPA ligand exchange for copper in 7-O 2 and O-O bond (re)formation chemistry, along with the ability to protonate 7-O 2 and release of H 2O 2 indicate the presence of an equilibrium between [{(6tbp)Cu (III)} 2(O (2-)) 2] (2+) ( 7-O 2 ) and a (mu-1,2)peroxodicopper(II) form.     

A new class of (mu-eta2:eta2-disulfido)dicopper complexes: synthesis, characterization, and disulfido exchange

Rare examples of (mu-eta2:eta2-disulfido)dicopper complexes have been prepared from Cu(I) and Cu(II) complexes of beta-diketiminate and anilido-imine supporting ligands. A novel byproduct derived from sulfur functionalization of the methine position of a beta-diketiminate ligand was identified. DFT calculations on [(LCu)2X2] (L = beta-diketiminate, X = O or S) complexes rationalize the absence of a bis(mu-sulfido)dicopper isomer, [Cu2(mu-S)2](2+), in the synthetic reactions, yet predict that a [Cu2(mu-S)2](0) core is a stable product of 2-electron reduction of the [Cu2(mu-eta2:eta2-S2)](2+) unit. Exchange of the disulfido ligand was discovered upon reaction of a (mu-eta2:eta2-disulfido)dicopper complex with a Cu(I) reagent.     

Bis(mu-oxo)dicopper in Cu-ZSM-5 and its role in the decomposition of NO: a combined in situ XAFS,UV-vis-near-IR,and kinetic study

In situ XAFS combined with UV-vis-near-IR spectroscopy are used to identify the active site in copper-loaded ZSM-5 responsible for the catalytic decomposition of NO. Cu-ZSM-5 was probed with in situ XAFS (i) after O(2) activation and (ii) while catalyzing the direct decomposition of NO into N(2) and O(2). A careful R-space fitting of the Cu K-edge EXAFS data is presented, including the use of different k-weightings and the analysis of the individual coordination shells. For the O(2)-activated overexchanged Cu-ZSM-5 sample a Cu.Cu contribution at 2.87 A with a coordination number of 1 is found. The corresponding UV-vis-near-IR spectrum is characterized by an intense absorption band at 22 700 cm(-1) and a relatively weaker band at 30 000 cm(-1), while no corresponding EPR signal is detected. Comparison of these data with the large databank of well-characterized copper centers in enzymes and synthetic model complexes leads to the identification of the bis(mu-oxo)dicopper core, i.e. [Cu(2)(mu-O)(2)](2+). After dehydration in He, Cu-ZSM-5 shows stable NO decomposition activity and the in situ XAFS data indicate the formation of a large fraction of the bis(mu-oxo)dicopper core during reaction. When the Cu/Al ratio of Cu-ZSM-5 exceeds 0.2, both the bis(mu-oxo)dicopper core is formed and the NO decomposition activity increases sharply. On the basis of the in situ measurements, a reaction cycle is proposed in which the bis(mu-oxo)dicopper core forms the product O(2) on a single active site and realizes the continuous O(2) release and concomitant self-reduction.     

Syntheses, characterization, and dioxygen reactivities of Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives: a Cu(III)2O2 intermediate exhibiting higher C-H activation

Six Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives (R3CY, R = Et, iBu, and Bn), [Cu(MeCN)(Et3CY)]SbF6 (1), [Cu(MeCN)(iBu3CY)]SbF6 (2), [Cu(MeCN)(Bn3CY)]SbF6 (3), [Cu(CO)(Et3CY)]SbF6 (4), [Cu(CO)(iBu3CY)]SbF6 (5), and [Cu(CO)(Bn3CY)]SbF6 (6), were prepared to probe the ability of copper complexes to effectively catalyze oxygenation reactions. The complexes were characterized by elemental analysis, electrochemical and X-ray structure analyses, electronic absorption spectroscopy, IR spectroscopy, 1H NMR spectroscopy, and ESI mass spectrometry. The crystal structures of 1-3 and 6 and the CO stretching vibrations (nuCO) of 4-6 demonstrate that the ability of R3CY to donate electron density to the Cu(I) atom is stronger than that of the previously reported ligands, 1,4,7-triazacyclononane (R3TACN) and 1,4,7-triazacyclodecane (R3TACD). Reactions of complexes 1-3 with dioxygen in THF or CH2Cl2 at -105 to -80 degrees C yield bis(mu-oxo)dicopper(III) complexes 7-9 as intermediates as confirmed by electronic absorption spectroscopy and resonance Raman spectroscopy. The Cu-O stretching vibrations, nu(Cu-O) for 7 (16O2: 553, 581 cm-1and 18O2: 547 cm-1) and 8 (16O2: 571 cm-1 and 18O2: 544 cm-1), are observed in a lower energy region than previously reported for bis(micro-oxo) complexes. The decomposition rates of complexes 7-9 in THF at -90 degrees C are 2.78 x 10-4 for 7, 8.04 x 10-4 for 8, and 3.80 x 10-4 s-1 for 9. The decomposition rates of 7 and 8 in CH2Cl2 were 5.62 x 10-4 and 1.62 x 10-3 s-1, respectively, and the thermal stabilities of 7-9 in CH2Cl2 are lower than the values measured for the complexes in THF. The decomposition reactions obeyed first-order kinetics, and the H/D isotope experiments for 8 and 9 indicate that the N-dealkylation reaction is the rate-determining step in the decomposition processes. On the other hand, the decomposition reaction of 7 in THF results in the oxidation of THF (acting as an exogenous substrate) to give 2-hydroxy tetrahydrofuran and gamma-butyrolactone as oxidation products. Detailed investigation of the N-dealkylation reaction for 8 by kinetic experiments using N-H/D at -90 degrees C showed a kinetic isotope effect of 1.25, indicating that a weak electrostatic interaction between the N-H hydrogen and mu-oxo oxygen contributes to the major effect on the rate-determining step of N-dealkylation. X-ray crystal structures of the bis(micro-hydroxo)dicopper(II) complexes, [Cu2(OH)2(Et3CY)2](CF3SO3)2 (10), [Cu2(OH)2(iBu3CY)2](CF3SO3)2 (11), and [Cu2(OH)2(Bn3CY)2](ClO4)2 (12), which have independently been prepared as the final products of bis(micro-oxo)dicopper(III) intermediates, suggest that an effective interaction between N-H and mu-oxo in the Cu(III)2(micro-O)2 core may enhance the oxidation ability of the metal-oxo species.     

Selective oxidation of methane by the bis(mu-oxo)dicopper core stabilized on ZSM-5 and mordenite zeolites

This work reports on the capability of the O2-activated Cu-ZSM-5 and Cu-MOR zeolites to selectively convert methane into methanol at a temperature of 398 K. A strong correlation between (i) the activity and (ii) the intensity of the 22 700 cm-1 UV-vis band, assigned to the bis(mu-oxo)dicopper core, is found (i) as a function of the reaction temperature, (ii) as a function of the Cu loading of the zeolite, and (iii) in comparison to other Cu materials. These three lines of evidence firmly support the key role of the bis(mu-oxo)dicopper core in this selective, low-temperature hydroxylation of methane.     

Resonance raman investigation of equatorial ligand donor effects on the Cu(2)O(2)(2+) core in end-on and side-on mu-peroxo-dicopper(II) and bis-mu-oxo-dicopper(III) complexes

The effect of endogenous donor strength on Cu(2)O(2) bonds was studied by electronically perturbing [[(R-TMPA)Cu(II)]](2)(O(2))](2+) and [[(R-MePY2)Cu](2)(O(2))](2+) (R = H, MeO, Me(2)N), which form the end-on mu-1,2 bound peroxide and an equilibrium mixture of side-on peroxo-dicopper(II) and bis-mu-oxo-dicopper(III) isomers, respectively. For [[(R-TMPA)Cu(II)](2)(O(2))](2+), nu(O-O) shifts from 827 to 822 to 812 cm(-1) and nu(Cu)(-)(O(sym)) shifts from 561 to 557 to 551 cm(-1), respectively, as R- varies from H to MeO to Me(2)N. Thus, increasing the N-donor strength to the copper decreases peroxide pi(sigma) donation to the copper, weakening the Cu-O and O-O bonds. A decrease in nu(Cu-O) of the bis-mu-oxo-dicopper(III) complex was also observed with increasing N-donor strength for the R-MePY2 ligand system. However, no change was observed for nu(O-O) of the side-on peroxo. This is attributed to a reduced charge donation from the peroxide pi(sigma) orbital with increased N-donor strength, which increases the negative charge on the peroxide and adversely affects the back-bonding from the Cu to the peroxide sigma orbital. However, an increase in the bis-mu-oxo-dicopper(III) isomer relative to side-on peroxo-dicopper(II) species is observed for R-MePY2 with R = H < MeO < Me(2)N. This effect is attributed to the thermodynamic stabilization of the bis-mu-oxo-dicopper(III) isomer relative to the side-on peroxo-dicopper(II) isomer by strong donor ligands. Thus, the side-on peroxo-dicopper(II)/bis-mu-oxo-dicopper(III) equilibrium can be controlled by electronic as well as steric effects.     

A double arene hydroxylation mediated by dicopper(II)-hydroperoxide species

The dicopper(II) complex [Cu(2)(L)](4+) (L = alpha,alpha'-bis[bis[2-(1'-methyl-2'-benzimidazolyl)ethyl]amino]-m-xylene) reacts with hydrogen peroxide to give the dicopper(II)-hydroquinone complex in which the xylyl ring of the ligand has undergone a double hydroxylation reaction at ring positions 2 and 5. The dihydroxylated ligand 2,6-bis([bis[2-(3-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)benzene-1,4-diol was isolated by decomposition of the product complex. The incorporation of two oxygen atoms from H(2)O(2) into the ligand was confirmed by isotope labeling studies using H(2)(18)O(2). The pathway of the unusual double hydroxylation was investigated by preparing the two isomeric phenolic derivatives of L, namely 3,5-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (6) and 2,6-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (7), carrying the hydroxyl group in one of the two positions where L is hydroxylated. The dicopper(II) complexes prepared with the new ligands 6 and 7 and containing bridging micro-phenoxo moieties are inactive in the hydroxylation. Though, the dicopper(II) complex 3 derived from 6 and containing a protonated phenol is rapidly hydroxylated by H(2)O(2) and represents the first product formed in the hydroxylation of [Cu(2)(L)](4+). Kinetic studies performed on the reactions of [Cu(2)(L)](4+) and 3 with H(2)O(2) show that the second hydroxylation is faster than the first one at room temperature (0.13 +/- 0.05 s(-1) vs 5.0(+/-0.1) x 10(-3) s(-1)) and both are intramolecular processes. However, the two reactions exhibit different activation parameters (Delta H++ = 39.1 +/- 0.9 kJ mol(-1) and Delta S++ = -115.7 +/- 2.4 J K(-1) mol(-1) for the first hydroxylation; Delta H++ = 77.8 +/- 1.6 kJ mol(-1) and Delta S++ = -14.0 +/- 0.4 J K(-1) mol(-1) for the second hydroxylation). By studying the reaction between [Cu(2)(L)](4+) and H(2)O(2) at low temperature, we were able to characterize the intermediate eta(1):eta(1)-hydroperoxodicopper(II) adduct active in the first hydroxylation step, [Cu(2)(L)(OOH)](3+) [lambda(max) = 342 (epsilon 12,000), 444 (epsilon 1200), and 610 nm (epsilon 800 M(-1)cm(-1)); broad EPR signal in frozen solution indicative of magnetically coupled Cu(II) centers].     

Dioxygen-binding kinetics and thermodynamics of a series of dicopper(I) complexes with bis[2-(2-pyridyl)ethyl]amine tridendate chelators forming side-on peroxo-bridged dicopper(II) adducts

Copper-dioxygen interactions are of interest due to their importance in biological systems as reversible O2- carriers, oxygenases, or oxidases and also because of their role in industrial and laboratory oxidation processes. Here we report on the kinetics (stopped-flow, -90 to 10 degrees C) of O2-binding to a series of dicopper(I) complexes, [Cu2(Nn)(MeCN)2]2+ (1Nn) (-(CH2)n- (n = 3-5) linked bis[(2-(2-pyridyl)ethyl]amine, PY2) and their close mononuclear analogue, [(MePY2)Cu(MeCN)]+ (3), which form mu-eta 2:eta 2-peroxodicopper(II) complexes [Cu2(Nn)-(O2)]2+ (2Nn) and [(MePY2)Cu]2(O2)]2+ (4), respectively. The overall kinetic mechanism involves initial reversible (k+,open/k-,open) formation of a nondetectable intermediate O2-adduct [Cu2(Nn)(O2)]2+ (open), suggested to be a CuI...CuII-O2- species, followed by its reversible closure (k+,closed/k-,closed) to form 2Nn. At higher temperatures (253 to 283 K), the first equilibrium lies far to the left and the observed rate law involves a simple reversible binding equilibrium process (kon,high = (k+,open/k-,open)(k+,closed)). From 213 to 233 K, the slow step in the oxygenation is the first reaction (kon,low = k+,open), and first-order behavior (in 1Nn and O2) is observed. For either temperature regime, the delta H++ for formation of 2Nn are low (delta H++ = -11 to 10 kJ/mol; kon,low = 1.1 x 10(3) to 4.1 x 10(3) M-1 s-1, kon,high = 2.2 x 10(3) to 2.8 x 10(4) M-1 s-1), reflecting the likely occurrence of preequilibria. The delta H degree ranges between -81 and -84 kJ mol-1 for the formation of 2Nn, and the corresponding equilibrium constant (K1) increases (3 x 10(8) to 5 x 10(10) M-1; 183 K) going from n = 3 to 5. Below 213 K, the half-life for formation of 2Nn increases with, rather than being independent of, the concentration of 1Nn, probably due to the oligomerization of 1Nn at these temperatures. The O2 reaction chemistry of 3 in CH2Cl2 is complicated, including the presence of induction periods, and could not be fully analyzed. However, qualitative comparisons show the expected slower intermolecular reaction of 3 with O2 compared to the intramolecular first-order reactions of 1Nn. Due to the likelihood of the partial dimerization of 3 in solution, the t1/2 for the formation of 4 remains constant with increasing complex concentration rather than decreasing. Acetonitrile significantly influences the kinetics of the O2 reactions with 1Nn and 3. For 1N4, the presence of MeCN inhibits the formation of a previously (Jung et al, J. Am. Chem. Soc. 1996, 118, 3763-3764) observed intermediate. Small amounts of added MeCN considerably slow the oxygenation rates of 3, inhibit its full formation to 4, and increase the length of the induction period. The results for 1Nn and their mononuclear analogue 3 are presented, and they are compared with each other as well as with other dinucleating dicopper(I) systems.     

Zwitterionic bis(phenolate)amine lanthanide complexes for the ring-opening polymerisation of cyclic esters

The reaction of Sm{N(SiMe3)2}3 with the bis(phenol)amines H2O2N(R) (H2O2N(R) = RCH2CH2N(2-HO-3,5-C6H2(t)Bu2)2; R = OMe, NMe2 or Me) gave exclusively zwitterions Sm(O2N(R))(HO2N(R)). For R = OMe or NMe2 these were efficient catalysts for the ring-opening polymerisation of epsilon-caprolactone and D,L-lactide with a tendency to form cyclic esters; in contrast, no polymerisation was observed for R = Me.     

Bis(mu-oxo)dicopper(III) complexes of a homologous series of simple peralkylated 1,2-diamines: steric modulation of structure, stability, and reactivity

We have synthesized and characterized bis(mu-oxo)dicopper(III) dimers 1b-4b (Os) based on a core family of peralkylated trans-(1R,2R)-cyclohexanediamine (CD) ligands, self-assembled from the corresponding [LCu(MeCN)]CF3SO3 species 1a-4a and O2 at 193 K in aprotic media; additional Os based on peralkylated ethylenediamine and tridentate polyazacyclononane ligands were synthesized analogously for comparative purposes (5b-7b and 8b-9b, respectively). Trigonal-planar [LCu(MeCN)]1+ species are proposed as the active O precursors. The 3-coordinate Cu(I) complexes [(L(TE))Cu(MeCN)]CF3SO3 (4a) and [(L(TB))Cu(MeCN)]CF3SO3 (10a) were structurally characterized; the apparent O2-inertness of 10a correlates with the steric demands of its four benzyl substituents. The rate of O formation, a multistep process that likely proceeds via associative formation of a 1:1 [LCu(O2)]1+ intermediate, exhibits significant dependence upon ligand sterics and solvent: oxygenation of 4a-the slowest-reacting O precursor of the CD series-is first-order with respect to [4a] and proceeds at least 300 times faster in tetrahydrofuran than in CH2Cl2. The EPR, UV-vis, and resonance Raman spectra of 1b-9b are all characteristic of the diamagnetic bis(mu-oxo)dicopper(III) core. The intense ligand-to-metal charge transfer absorption maxima of CD-based Os are red-shifted proportionally with increasing peripheral ligand bulk, an effect ascribed to a slight distortion of the [Cu2O2] rhomb. The well-ordered crystal structure of [(L(ME))2Cu2(mu-O)2](CF3SO3)2.4CH2Cl2 ([3b. 4CH2Cl2]) features the most metrically compact [Cu2O2]2+ core among structurally characterized Os (av Cu-O 1.802(7) A; Cu...Cu 2.744(1) A) and exemplifies the minimal square-planar ligation environment necessary for stabilization of Cu(III). The reported Os are mild oxidants with moderate reactivity toward coordinating substrates, readily oxidizing thiols, certain activated alkoxides, and electron-rich phenols in a net 2e-, 2H+ process. In the absence of substrates, 1b-9b undergo thermally induced autolysis with concomitant degradation of the polyamine ligands. Ligand product distribution and primary kinetic isotope effects (kobsH/kobsD approximately 8, 1b/d24-1b, 293 K) support a unimolecular mechanism involving rate-determining C-H bond cleavage at accessible ligand N-alkyl substituents. Decomposition half-lives span almost 3 orders of magnitude at 293 K, ranging from approximately 2 s for 4b to almost 30 min for d(24)-1b, the most thermally robust dicationic O yet reported. Dealkylation is highly selective where ligand rigidity constrains accessibility; in 3b, the ethyl groups are attacked preferentially. The observed relative thermal stabilities and dealkylation selectivities of 1b-9b are correlated with NC(alpha)-H bond dissociation energies, statistical factors, ligand backbone rigidity, and ligand denticity/axial donor strength. Among the peralkylated amines surveyed, bidentate ligands with oxidatively robust NC(alpha)-H bonds provide optimal stabilization for Os. Fortuitously, the least sterically demanding N-alkyl substituent (methyl) gives rise to the most thermally stable and most physically accessible O core, retaining the potential for exogenous substrate reactivity.     

Copper(II) hexaaza macrocyclic binuclear complexes obtained from the reaction of their copper(I) derivates and molecular dioxygen

Density functional theory (DFT) calculations have been carried out for a series of Cu(I) complexes bearing N-hexadentate macrocyclic dinucleating ligands and for their corresponding peroxo species (1c-8c) generated by their interaction with molecular O2. For complexes 1c-7c, it has been found that the side-on peroxodicopper(II) is the favored structure with regard to the bis(mu-oxo)dicopper(III). For those complexes, the singlet state has also been shown to be more stable than the triplet state. In the case of 8c, the most favored structure is the trans-1,2-peroxodicopper(II) because of the para substitution and the steric encumbrance produced by the methylation of the N atoms. Cu(II) complexes 4e, 5e, and 8e have been obtained by O2 oxidation of their corresponding Cu(I) complexes and structurally and magnetically characterized. X-ray single-crystal structures for those complexes have been solved, and they show three completely different types of Cu(II)2 structures: (a) For 4e, the Cu(II) centers are bridged by a phenolate group and an external hydroxide ligand. The phenolate group is generated from the evolution of 4c via intramolecular arene hydroxylation. (b) For 5e, the two Cu(II) centers are bridged by two hydroxide ligands. (c) For the 8e case, the Cu(II) centers are ligated to terminally bound hydroxide ligands, rare because of its tendency to bridge. The evolution of complexes 1c-8c toward their oxidized species has also been rationalized by DFT calculations based mainly on their structure and electrophilicity. The structural diversity of the oxidized species is also responsible for a variety of magnetic behavior: (a) strong antiferromagnetic (AF) coupling with J = -482.0 cm(-1) (g = 2.30; rho = 0.032; R = 5.6 x 10(-3)) for 4e; (b) AF coupling with J = -286.3 cm(-1) (g = 2.07; rho = 0.064; R = 2.6 x 10(-3)) for 5e; (c) an uncoupled Cu(II)2 complex for 8e.     

Aliphatic Hydroxylation by a Bis(µ-oxo)dicopper(III) Complex

By using molecular oxygen bis(μ-oxo)dicopper(III) complexes can be produced from Cu(I) complexes with ligand L(X) (L(X)=p-substituted N-ethyl-N-[2-(2-pyridyl)ethyl]-2-phenylethylamine; X=OMe, Me, H, Cl, NO(2)) in which the benzylic position of the ligand is activated and hydroxylated by the Cu(2)O(2) core (see reaction scheme). Detailed characterization of this new C-H bond activation reaction by the bis(μ-oxo)dicopper(III) core reveals important information on the fundamental chemistry underlying copper monooxygenase reactivity.     

Spectroscopic characterization of the oxo-transfer reaction from a bis(mu-oxo)dicopper(III) complex to triphenylphosphine

The oxygen-atom transfer reaction from the bis(mu-oxo)dicopper(III) complex [Cu(III)(2)(mu-O)(2)(L)(2)](2+), where L =N,N,N',N' -tetraethylethylenediamine, to PPh(3) has been studied by UV-vis, EPR, (1)H NMR and Cu K-edge X-ray absorption spectroscopy in parallel at low temperatures (193 K) and above. Under aerobic conditions (excess dioxygen), 1 reacted with PPh(3), giving O=Ph(3) and a diamagnetic species that has been assigned to an oxo-bridged dicopper(II) complex on the basis of EPR and Cu K-edge X-ray absorption spectroscopic data. Isotope-labeling experiments ((18)O(2)) established that the oxygen atom incorporated into the triphenylphosphine oxide came from both complex 1 and exogenous dioxygen. Detailed kinetic studies revealed that the process is a third-order reaction; the rate law is first order in both complex 1 and triphenylphosphine, as well as in dioxygen. At temperatures above 233 K, reaction of 1 with PPh(3) was accompanied by ligand degradation, leading to oxidative N-dealkylation of one of the ethyl groups. By contrast, when the reaction was performed in the absence of excess dioxygen, negligible substrate (PPh(3)) oxidation was observed. Instead, highly symmetrical copper complexes with a characteristic isotropic EPR signal at g= 2.11 were formed. These results are discussed in terms of parallel reaction channels that are activated under various conditions of temperature and dioxygen.     

Asymmetric transformation of a double-stranded, dicopper(I) helicate containing achiral bis(bidentate) Schiff bases

Reactions of the bis(bidentate) Schiff-bases N,N'-bis(6-alkyl-2-pyridylmethylene)ethane-1,2-diamine (where alkyl = H, Me, iPr) (L) with tetrakis(acetonitrile)copper(I) hexafluorophosphate and silver(I) hexafluorophosphate afforded, respectively, the double-stranded, dinuclear metal helicates [T-4-(R,R)]-(+/-)-[M2L2](PF6)2 (M = Cu, Ag). The helicates were characterized by 1H and 13C NMR spectroscopy, conductivity, microanalysis, and single-crystal X-ray structure determinations on selected compounds. Intermolecular ligand exchange and intramolecular inversion rates for the complexes were investigated by 1H NMR spectroscopy. Reversible intermolecular ligand exchange between two differently substituted helicates followed first-order kinetics. The rate constants (k) and corresponding half-lives (t(1/2)) for ligand exchange for the dicopper(I) helicates were k = (1.6-1.8) x 10(-6) s(-1) (t(1/2) = 110-120 h) in acetone-d6, k = 4.9 x 10(-6) s(-1) (t(1/2) = 40 h) in dichloromethane-d2, and k > 2 x 10(-3) s(-1) (t(1/2) < 5 min) in acetonitrile-d3. Ligand exchange for the disilver(I) helicates occurred with k > 2 x 10(-3) s(-1) (t(1/2) < 5 min). Racemization of the dicopper(I) helicate by an intramolecular mechanism was investigated by determination of the coalescence temperature for the diastereotopic isopropyl-Me groups in the appropriate complex, and DeltaG() > 76 kJ mol(-1) was calculated for the process in acetone-d6, nitromethane-d3, and dichloromethane-d2 with DeltaG() = 75 kJ mol(-1) in acetonitrile-d3. Complete anion exchange of the hexafluorophosphate salt of a dicopper(I) helicate with the enantiomerically pure Delta-(-)-tris(catecholato)arsenate(V) ([As(cat)3]-) in the presence of Dabco gave the two diastereomers (R,R)-[Cu2L2][Delta-(-)-[As(cat)3]]2 and (S,S)-[Cu2L2][Delta-(-)-[As(cat)3]]2 in up to 54% diastereomeric excess, as determined by (1)H NMR spectroscopy. The diastereomerically and enantiomerically pure salt (R,R)-[Cu(2)L2][Delta-(-)-[As(cat)3]]2 crystallized from the solution in a typical second-order asymmetric transformation. The asymmetric transformation of the dicopper(I) helicate is the first synthesis of a diastereomerically and enantiomerically pure dicopper(I) helicate containing achiral ligands.     

Conversion of methane to methanol at the mononuclear and dinuclear copper sites of particulate methane monooxygenase (pMMO): a DFT and QM/MM study

Methane hydroxylation at the mononuclear and dinuclear copper sites of pMMO is discussed using quantum mechanical and QM/MM calculations. Possible mechanisms are proposed with respect to the formation of reactive copper-oxo and how they activate methane. Dioxygen is incorporated into the Cu(I) species to give a Cu(II)-superoxo species, followed by an H-atom transfer from a tyrosine residue near the monocopper active site. A resultant Cu(II)-hydroperoxo species is next transformed into a Cu(III)-oxo species and a water molecule by the abstraction of an H-atom from another tyrosine residue. This process is accessible in energy under physiological conditions. Dioxygen is also incorporated into the dicopper site to form a (mu-eta(2):eta(2)-peroxo)dicopper species, which is then transformed into a bis(mu-oxo)dicopper species. The formation of this species is more favorable in energy than that of the monocopper-oxo species. The reactivity of the Cu(III)-oxo species is sufficient for the conversion of methane to methanol if it is formed in the protein environment. Since the sigma orbital localized in the Cu-O bond region is singly occupied in the triplet state, this orbital plays a role in the homolytic cleavage of a C-H bond of methane. The reactivity of the bis(mu-oxo)dicopper species is also sufficient for the conversion of methane to methanol. The mixed-valent bis(mu-oxo)Cu(II)Cu(III) species is reactive to methane because the amplitude of the sigma singly occupied MO localized on the bridging oxo moieties plays an essential role in C-H activation.     

Contrasting copper-dioxygen chemistry arising from alike tridentate alkyltriamine copper(I) complexes

Copper(I)-dioxygen interactions are of great interest due to their role in biological O2-processing as well as their importance in industrial oxidation processes. We describe here the study of systems which lead to new insights concerning the factors which govern Cu(II)-mu-eta2:eta2 (side-on) peroxo versus Cu(III)-bis-mu-oxo species formation. Drastic differences in O2-reactivity of Cu(I) complexes which differ only by a single -CH3 versus -H substituent on the central amine of the tridentate ligands employed are observed. [Cu(MeAN)]B(C6F5)4 (1) (MeAN = N,N,N',N',N'-pentamethyl-dipropylenetriamine) reacts with O2 at -80 degrees C to form almost exclusively the side-on peroxo complex [{CuII(MeAN)}2(O2)]2+ (3) in CH2Cl2, tetrahydrofuran, acetone, and diethyl ether solvents, as characterized by UV-vis and resonance Raman spectroscopies. In sharp contrast, [Cu(AN)]B(C6F5)4 (2) (AN = 3, 3'-iminobis(N,N-dimethyl-propylamine) can support either Cu2O2 structures in a strongly solvent-dependent manner. Extreme behavior is observed in CH2Cl2 solvent, where 1 reacts with O2 giving 3, while 2 forms exclusively the bis-mu-oxo species [{CuIII(AN)}2(O)2]2+ (4Oxo). Stopped-flow kinetics measurements also reveal significant variations in the oxygenation reactions of 1 versus 2, including the observations that 4Oxo forms much faster than does 3; the former decomposes quickly, while the latter is quite stable at 193 K. The solvent-dependence of the bis-mu-oxo versus side-on peroxo preference observed for 2 is opposite to that reported for other known copper(I) complexes; the factors which may be responsible for the unusual behavior of 1/O2 versus 2/O2 (possibly N-H hydrogen bonding in the AN chemistry) are suggested. The factors which affect bis-mu-oxo versus side-on peroxo formation continue to be of interest.