Polymerization of Methyl Methacrylate in the Presence of N-Acetyl-ε-aminocaproic Acid Acetylamide

The effect of N-acetyl--aminocaproic acid acetylamide on radical polymerization of methyl methacrylate initiated with lauroyl peroxide was studied.     

Chemical Reactions and Kinetics of the Carbon Monoxide Coupling in the Presence of Hydrogen

The chemical reactions and kinetics of the catalytic coupling reaction of carbon monoxide to diethyl oxalate were studied in the presence of hydrogen over a supported palladium catalyst in the gaseous phase at the typical coupling reaction conditions. The experiments were performed in a continuous flow fixed-bed reactor. The results indicated that hydrogen only reacts with ethyl nitrite to form ethanol, and kinetic studies revealed that the rate-determining step is the surface reaction of adsorbed hydrogen and the ethoxy radical (EtO-). A kinetic model is proposed and a comparison of the observed and calculated conversions showed that the rate expressions are of rather high confidence.     

Stereochemistry of Substitution of the α-Dimethylamino Group by Dialkylzinc in Chiral Benzylferrocene

The stereochemistry of the substitution of the α-dimethylamino group by dimethylzinc in the presence of acetyl chloride in the chiral benzylferrocene backbone was examined. The reaction with the benzylferrocene bearing an o-bromo substituent at both ferrocene and the phenyl ring proceeded with inversion of configuration, while the reaction with the benzylferrocene bearing an o-bromo substituent at either ferrocene or the phenyl ring proceeded with retention of configuration.     

Microwave‐Assisted Epoxidation of Simple Alkenes in the Presence of Hydrogen Peroxide

A novel application of microwave irradiation for the epoxidation of some simple alkenes, in which hydrogen peroxide was used as an oxidant together with sodium tungsten and phosphorous acid under phase‐transfer catalytic (PTC) conditions, is described as a new environmentally benign method. In comparison with conventional heating, the microwave process is a very useful alternative for introducing of the oxirane ring into some unsaturated hydrocarbons because of reduction of the reaction time and increase in yield.     

Semibatch Emulsifier-free Emulsion Copolymerization of Methyl Methacrylate and n-Butyl Acrylate in the Presence of 2-Hydroxyethyl Methacrylate

ThemethodsofimProvingthestabilityofemulsifier-freeemulsionpolymerizationhavebeenreportedinliteraturet(a)choosingionizableinitiators,suchaspotassiumpersulfate'andazo-bis(isobutyramidinehydrochloride)';(b)copolymerizationwithhydrophiliccomonomers,whichinvolvestheionictypesuchascarboxylicmonomers',sulfoderivativesofvinylmonomers',andthenonionictypesuchasglycidylmethacrylate';(c)copolymerizationwithsurface-activemonomers,suchassulfodecylslyrylether';(d)addingorganicsolventstothesystem,suchasmethano…     

Regioselective Monoacetylation of Methyl Pyranosides of Pentoses and 6‐Deoxyhexoses by Acetic Anhydride in the Presence of MoCl5

Convenient regioselective syntheses of 3‐acetates of methyl pyranosides of α‐L‐rhamnose, α‐ and β‐L‐arabinose, α‐D‐fucose, α‐D‐lyxose, and β‐D‐ribose with good yields have been attained using MoCl₅ as catalyst. Methyl β‐L‐rhamnopyranoside under this conditions gave 2‐acetate.     

Carbocationic Polymerization in the Presence of Sterically Hindered Bases. V. The Polymerization of α-Methylstyrene by the “H2O”7BCI3 Initiating System

The influence of 2,6-di-tert-butylpyridine (DtBP) on the polymerization of α-methylstyrene (αMeSt) induced by the “H₂O”/BC1₃ initiating system in the -20 to ?60°C range has been studied in detail. Adventitious H₂O (“H₂O”) is the initiating cationogen and initiation most likely proceeds by a concerted route in the absence of free protons or the acid H^⊕BC1₃ OH^⊕ Polymerizations are extremely rapid and kinetic termination is absent (conversions are 100%) in the absence of DtBP. In the presence of DtBP, polymerizations are still very fast; however, conversions are reduced. Significantly, conversions increase with decreasing temperatures, which suggests the operational presence of terminative proton entrapment. Molecular weights increase with decreasing temperatures in the presence and absence of DtBP and the slopes of the linear Arrhenius plots (In [Mbar]_w versus 1/T) are parallel; the molecular weights obtained in the presence of DtBP are close to a factor of 10 higher than those produced in the absence of this hindered pyridine. The virtual identity of the slopes of Arrhenius plots indicates close similarity between the nature and rate of molecular-weight-determining events in the absence and presence of DtBP, i.e., k_p/k_tr,m and k_p/k_tr,G^⊕ DtBP profoundly affects molecular weight dispersity: [Mbar]_w/[Mbar]_n = 3.0–4.0 in the absence of DtBP whereas [Mbar]_w/[Mbar]_n = 1.5 -1.8 in the presence of DtBP. The number w of polymer molecules formed (yield/[Mbar]_n) in the absence of DtBP whereas [Mbar]_w/[Mbar]_n = 1.5–1.8 in presence of DtBP. The number of polymer molecules formed (yield/[Mbar]_n) = 1.5–1.8 in the presence of DtBp. The number of polymer molecules formed (yield/[Mbar]_n) in the absence of DtBP decreases with decreasing temperature while those formed in the presence of DtBP remain constant. According to Mayo, (1/[Mbar]_n versus 1/ [M] plots chain transfer to monomer in the peresence of DtBP is vey low (k_tr,m /k_p = 6.4 × 10^?4 and 2.8 × 10^?4 at ?30 and ?50°C) but not zero. Conceivably two kinds of chain transfer to monomer reactions may exist (direct and indirect) and only one (i.e., the indirect one) may be trappable by DtBP. The effect of [DtBP] on the percent converstion and [Mbar]_n was investigated: Above a fairly well defined [DtBP], neither conversions nor [Mbar]_n's were affected by [DtBP]. With increasing [DtBP] molecular weight dispersions rapidly decrease and [Mbar]_w [Mbar]_n's seem to level off at ～ 1.5 at relatively high [DtBP]. Changing the polarity of the solvent characteristically affects the mechanism of α MeSt polmerzation in the presence and absence of DtBP results in a strong increase in [Mbar]_w/[Mbar]_n (from ～ 1.5 to ～ 4.0), in the presence of DtBP [Mbar]_w/[Mbar]_n remains virtually unchanged at ～1.5.     

Polymerization of Methyl Methacrylate by the System Ribonucleic Acid–Water in the Presence of Carbon Tetrachloride and Copper(11) Ion

Polymerization of methyl methacrylate (MMA) was carried out in the presence of ribonucleic acid (RNA), water, carbon tetrachloride, and copper(II) ion. The overall activation energy for the polymerization is proportional to the square root of the amount of RNA. The rate increased at first with the amount of MMA, but then became independent of the amount of MMA.

Polymerization was inhibited by the presence of air. Carbon tetrachloride and copper(II) ion are able to give RNA the ability to initiate polymerization. Conversion of MMA is accelerated by the addition of tertiary amine derivatives instead of carbon tetrachloride.     

Kinetics and Mechanism of 2,3,6-Trimethylphenol Oxidation by Hydrogen Peroxide in the Presence of TiO2–SiO2 Aerogel

The product and kinetics studies of 2,3,6-trimethylphenol (TMP) oxidation by 30% aqueous ₂₂ in the presence of a heterogeneous catalyst, TiO₂–SiO₂ aerogel, are performed in an MeCN medium. The main reaction products are 2,3,5-trimethyl-1,4-benzoquinone and 2,2",3,3",6,6"-hexamethyl-4,4"-biphenol. The reaction is first-order in ₂₂ and fractional order (1–0) in TMP. The reaction rate is proportional to the catalyst amount and depends on the water concentration in the reaction mixture in a complex manner. The results suggest the formation of an active intermediate on the titanium center. In this intermediate containing both a TMP molecule and the hydroperoxide group, inner-sphere one-electron oxidation of TMP occurs to give the phenoxyl radical.     

Oligomerization of α-Methylstyrene in the Presence of Mordenite Type Zeolite

The activity and selectivity of coarse-porous H-mordenite in synthesis of cyclic and linear dimers of -methylstyrene were studied.     

Solvent‐Free Reactions of Fullerenes with Diethyl Bromomalonate in the Presence of Inorganic Bases Under High‐Speed Vibration Milling Conditions

Abstract

Solvent‐free reactions of C₆₀ and C₇₀ with diethyl bromomalonate in the presence of various inorganic bases were investigated under the high‐speed vibration milling (HSVM) conditions, and are shown to give methanofullerenes 1 and 2 in good to excellent yields based on consumed fullerenes. Several weak inorganic bases were found to be quite effective in promoting the solvent‐free mechanochemical Bingel reactions of C₆₀ and C₇₀ under the HSVM conditions. Among the studied bases, sodium acetate gave the highest yield of monoadducts, while potassium carbonate afforded a considerable amount of bisadducts for both C₆₀ and C₇₀.     

De‐agglomeration of Silica Nanoparticles in the Presence of Surfactants

The effect of the type of surfactant and pH on de‐agglomeration of a hydrophilic silica nano‐powder in a high shear mixer was investigated. It has been found that the presence of surfactant does not affect the general pattern of de‐agglomeration characterized by the transition of a single modal aggregates size distribution with the median of 10 µm, through a bi‐modal distributions with the second median of the order of 100 nm to a single modal distribution with the median of the order of 100 nm. None of the investigated surfactants enabled de‐agglomeration of the nano‐powder into a primary nanoparticle.

At pH=4, breakage of large secondary aggregates was enhanced by the addition of PEG and PVP, whereas the addition of SDS slowed down de‐agglomeration. The final aggregates were larger in all suspensions containing surfactant than in surfactant free suspensions. At pH=9 all surfactants drastically reduced de‐agglomeration rate without affecting the size of the primary aggregates. PEG induced bridge flocculation of the primary aggregates leading to a drastic change of the rheology of suspension.     

Proving and Probing the Presence of the Elusive C−H⋅⋅⋅O Hydrogen Bond in Liquid Solutions at Room Temperature

Hydrogen bonds (H bonds) play a major role in defining the structure and properties of many substances, as well as phenomena and processes. Traditional H bonds are ubiquitous in nature, yet the demonstration of weak H bonds that occur between a highly polarized C−H group and an electron-rich oxygen atom, has proven elusive. Detailed here are linear and nonlinear IR spectroscopy experiments that reveal the presence of H bonds between the chloroform C−H group and an amide carbonyl oxygen atom in solution at room temperature. Evidence is provided for an amide solvation shell featuring two clearly distinguishable chloroform arrangements that undergo chemical exchange with a time scale of about 2 ps. Furthermore, the enthalpy of breaking the hydrogen bond is found to be 6–20 kJ mol⁻¹. Ab-initio computations support the findings of two distinct solvation shells formed by three chloroform molecules, where one thermally undergoes hydrogen-bond making and breaking.     

Alkylation of 2-Sulfanylbenzoxazole with α-Iodoketones in the Absence of Bases

Reaction of 2-sulfanylbenzoxazole with 1-iodopropan-2-one, 2-iodo-1-phenylethanone, and 2-iodo-1-(thiophen-2-yl)ethanone without solvent and bases afforded bis(benzoxazol-2-yl)disulfonium derivatives in a single preparative stage. The reaction proceeds as a domino-process and includes the alkylation of a sulfanyl group of benzoxazole, the reduction of iodoketone with hydrogen iodide, the oxidation of 2-sulfanylbenzoxazole to disulfide, the alkylation of disulfide atoms of sulfur, and the formation of triiodideanions. The yield of disulfonium derivatives increases twice in the presence of equimolar amount of iodine.     

Synthesis of Methyl 2‐Methylazulene‐3‐carboxylate in the Presence of Molecular Sieves and Reaction with N‐Bromosuccinimide

The preparation of methyl 2‐methylazulene‐1‐carboxylate (1) was carried out in the presence of molecular sieves to obtain a good yield. The product was subjected to bromination under different reaction conditions to obtain methyl 1‐bromo‐2‐methylazulene‐1‐carboxylate (2) and methyl 1‐bromo‐2‐(bromomethyl) azulene‐1‐carboxylate (3).     

Solvent‐Free Synthesis of Benzothiazolines in the Presence of Alumina

o‐Aminothiophenol reacted with ketones and β‐keto esters in the presence of alumina under mild and solvent‐free conditions to afford the corresponding benzothiazolines in high yields. Alumina can be reused for subsequent reactions without any loss of the activity.     

Substitution of halogen atom in α-halonitro compounds of the aliphatic series

Ethyl -halo--nitropropionate and -butyrate were prepared by alkylating ammonium salts of ethyl bromo- and chloronitroacetates. The addition of alkyl acrylates to alkyl chloronitroacetates or their salts gives dialkyl -chloro--nitroglutarates. Sodium salts of ethyl -nitro--sulfo--hydroxypropionate and -butyrate were obtained by the sulfodehalogenation of ethyl -chloro--nitro--hydroxypropionate and -butyrate with sodium dithionite. Esters of -amino acid hydrochlorides were prepared by the reduction of alkyl -chloro--nitrocarboxylates. The hydrogenation of alkyl nitrosulfoacetates leads to the corresponding disodium salts of alkyl aminodisulfoacetates and piperazine-2,5-dione.For communication 5 seeIvz. Akad. Nauk SSSR, Ser. Khim., 1990, 2012 [Bull. Acad. Sci. USSR, Div. Chem. Sci., 1990,39, 1826].Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 872–876, May, 1994.     

Deprotection of Oximes using Iodosobenzene in the Presence of β‐Cyclodextrin in Water

A mild and efficient method for the regeneration of carbonyl compounds from oximes at room temperature in impressive yields has been developed using iodosobenzene/KBr in the presence of β‐cyclodextrin in water.