Synthesis and structural characterization of quaternary thorium selenophosphates: A2ThP3Se9 (A = K, Rb) and Cs4Th2P5Se17

Single crystals of A2ThP3Se9 (A = K (I), Rb (II)) and Cs4Th2PsSe17 (III) form from the reaction of Th and P in a molten A2Se3/Se (A = K, Rb, Cs) flux at 750 degrees C for 100 h. Compound I crystallizes in the triclinic space group P1 (No. 2) with unit cell parameters a = 10.4582(5) A, b = 16.5384(8) A, c = 10.2245(5) A, alpha = 107.637(1); beta = 91.652(1); gamma = 90.343(1) degrees, and Z = 2. Compound II crystallizes in the triclinic space group P1 (No. 2) with the unit cell parameters a = 10.5369(5) A, b = 16.6914(8) A, c = 10.2864(5) A, alpha = 107.614(1) degrees, beta = 92.059(1) degrees, gamma = 90.409(1) degrees, and Z = 2. These structures consist of infinite chains of corner-sharing [Th2Se14] units linked by (P2Se6)4- anions in two directions to form a ribbonlike structure along the [100] direction. Compounds I and II are isostructural with the previously reported K2UP3Se9. Compound III crystallizes in the monoclinic space group P2(1)/c (No. 14) with unit cell parameters a = 10.238(1) A, b = 32.182(2) A, c = 10.749(1) A; beta = 95.832(1) degrees, and Z = 4. Cs4Th2P5Se17 consists of infinite chains of corner-sharing, polyhedral [Th2Se13] units that are also linked by (P2Se6)4- anions in the [100] and [010] directions to form a layered structure. The structure of III features an (Se2)2- anion that is bound eta 2 to Th(2) and eta 1 to Th(1). This anion influences the coordination sphere of the 9-coordinate Th(2) atom such that it is best described as bicapped trigonal prismatic where the eta 2-bound anion occupies one coordination site. The composition of III may be formulated as Cs4Th2(P2Se6)5/2(Se2) due to the presence of the (Se2)2- unit. Raman spectra for these compounds and their interpretation are reported.     

Tropochemical cell-twinning in the new quaternary bismuth selenides KxSn(6-2x)Bi(2+x)Se9 and KSn5Bi5Se13

The quaternary K(x)Sn(6-2x)Bi(2+x)Se(9) and KSn(5)Bi(5)Se(13) were discovered from reactions involving K(2)Se, Bi(2)Se(3), Sn, and Se. The single crystal structures reveal that K(x)Sn(6-2x)Bi(2+x)Se(9) is isostructural to the mineral heyrovskyite, Pb(6)Bi(2)S(9), crystallizing in the space group Cmcm with a = 4.2096(4) A, b = 14.006(1) A, and c = 32.451(3) A while KSn(5)Bi(5)Se(13) adopts a novel monoclinic structure type (C2/m, a = 13.879(4) A, b = 4.205(1) A, c = 23.363(6) A, beta = 99.012(4) degrees ). These compounds formally belong to the lillianite homologous series xPbS.Bi(2)S(3), whose characteristic is derivation of the structure by tropochemical cell-twinning on the (311) plane of the NaCl-type lattice with a mirror as twin operation. The structures of K(x)Sn(6-2x)Bi(2+x)Se(9) and KSn(5)Bi(5)Se(13) differ in the width of the NaCl-type slabs that form the three-dimensional arrangement. While cell-twinning of 7 octahedra wide slabs results in the heyrovskyite structure, 4 and 5 octahedra wide slabs alternate in the structure of KSn(5)Bi(5)Se(13). In both structures, the Bi and Sn atoms are extensively disordered over the metal sites. Some physicochemical properties of K(x)Sn(6-2x)Bi(2+x)Se(9) and KSn(5)Bi(5)Se(13) are reported.     

Syntheses and structures of the infinite chain compounds Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14)

The alkali metal/group 4 metal/polychalcogenides Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) have been synthesized by means of the reactive flux method at 823 or 873 K. Cs(4)Ti(3)Se(13) crystallizes in a new structure type in space group C(2)(2)-P2(1) with eight formula units in a monoclinic cell at T = 153 K of dimensions a = 10.2524(6) A, b = 32.468(2) A, c = 14.6747(8) A, beta = 100.008(1) degrees. Cs(4)Ti(3)Se(13) is composed of four independent one-dimensional [Ti(3)Se(13)(4-)] chains separated by Cs(+) cations. These chains adopt hexagonal closest packing along the [100] direction. The [Ti(3)Se(13)(4-)] chains are built from the face- and edge-sharing of pentagonal pyramids and pentagonal bipyramids. Formal oxidation states cannot be assigned in Cs(4)Ti(3)Se(13). The compounds Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) crystallize in the K(4)Ti(3)S(14) structure type with four formula units in space group C(2)(h)()(6)-C2/c of the monoclinic system at T = 153 K in cells of dimensions a = 21.085(1) A, b = 8.1169(5) A, c = 13.1992(8) A, beta = 112.835(1) degrees for Rb(4)Ti(3)S(14);a = 21.329(3) A, b = 8.415(1) A, c = 13.678(2) A, beta = 113.801(2) degrees for Cs(4)Ti(3)S(14); a = 21.643(2) A, b = 8.1848(8) A, c = 13.331(1) A, beta = 111.762(2) degrees for Rb(4)Hf(3)S(14); a = 22.605(7) A, b = 8.552(3) A, c = 13.880(4) A, beta = 110.919(9) degrees for Rb(4)Zr(3)Se(14); a = 22.826(5) A, b = 8.841(2) A, c = 14.278(3) A, beta = 111.456(4) degrees for Cs(4)Zr(3)Se(14); and a = 22.758(5) A, b = 8.844(2) A, c = 14.276(3) A, beta = 111.88(3) degrees for Cs(4)Hf(3)Se(14). These A(4)M(3)Q(14) compounds (A = alkali metal; M = group 4 metal; Q = chalcogen) contain hexagonally closest-packed [M(3)Q(14)(4-)] chains that run in the [101] direction and are separated by A(+) cations. Each [M(3)Q(14)(4-)] chain is built from a [M(3)Q(14)] unit that consists of two MQ(7) pentagonal bipyramids or one distorted MQ(8) bicapped octahedron bonded together by edge- or face-sharing. Each [M(3)Q(14)] unit contains six Q(2)(2-) dimers, with Q-Q distances in the normal single-bond range 2.0616(9)-2.095(2) A for S-S and 2.367(1)-2.391(2) A for Se-Se. The A(4)M(3)Q(14) compounds can be formulated as (A(+))(4)(M(4+))(3)(Q(2)(2-))(6)(Q(2-))(2).     

Synthesis, structure, and properties of Cs(4)Th(4)P(4)Se(26): a quaternary thorium selenophosphate containing the (P(2)Se(9))(6-) anion

Orange crystals of Cs(4)Th(4)P(4)Se(26) were grown from the reaction of (232)Th and P in a Cs(2)Se(3)/Se molten salt flux at 750 degrees C. Cs(4)Th(4)P(4)Se(26) crystallizes in the orthorhombic space group Pbca with the unit cell parameters: a = 12.0130(6), b = 14.5747(7), c = 27.134(1) A; Z = 8. The compound exhibits a three-dimensional structure, consisting of dimeric [Th(2)Se(13)] polyhedral units. The two crystallographically independent, nine-coordinate, bicapped trigonal prismatic thorium atoms share a triangular face to form the dimer, and each dimer edge-shares two selenium atoms with two other dimers to form kinked chains along the [010] direction. While this structure shares features of the previously reported Rb(4)U(4)P(4)Se(26), including phosphorus in the 5+ oxidation state, careful inspection of the structure reveals that the selenophosphate anion that knits the structure together in three directions in both compounds is a unique (P(2)Se(9))(6-) anion. The formula may be described best as [Cs(2)Th(2)(P(2)Se(9))(Se(2))(2)](2). The (P(2)Se(9))(6-) anion features a nearly linear Se-Se-Se backbone with an angle of 171 degrees and Se-Se distances that are approximately 0.2-0.3 A longer than the typical single Se-Se bond. Magnetic studies confirm that this phase contains Th(IV). Raman data for this compound is reported, and structural comparisons will be drawn to its uranium analogue, Rb(4)U(4)P(4)Se(26).     

K(2)MM'(3)Se(6) (M = Cu,Ag; M' = Ga,In), A new series of metal chalcogenides with chain-sublayer-chain slabs: (infinity)(1)[M'Se(4)]-(infinity)(2)[(MSe(4))(M'Se(4))]-(infinity)(1)[M'Se(4)

A new series of novel isostructural metal chalcogenides, K(2)CuIn(3)Se(6) (1), K(2)CuGa(3)Se(6) (2), and K(2)AgIn(3)Se(6) (3), were obtained by a reactive flux technique and structurally characterized. Compounds 1, 2, and 3 crystallize in the space group C2/c of the monoclinic system with eight formula units in a cell: a = 11.445(2) A, b = 11.495(2) A, c = 21.263(4) A, beta = 97.68(3) degrees, V = 2772(1) A(3), R1/wR2 = 0.0676/0.1652 for 1; a = 11.031(2) A, b = 11.050(4) A, c = 20.808(7) A, beta = 97.71(2) degrees, V = 2513(1) A(3), R1/wR2 = 0.0301/0.0511 for 2; and a = 11.633(1) A, b = 11.587(1) A, c = 21.355(1) A, beta = 98.010(8) degrees, V = 2850.4(4) A(3), R1/wR2 = 0.0471/0.0732 for 3. These isostructural compounds are characterized by a chain-sublayer-chain slab structure. The sublayer, composed of alternative corner-sharing mixed-metal tetrahedra, is sandwiched by parallel corner-sharing tetrahedral chains. Optical absorption spectra of compounds 1, 2, and 3 reveal the presence of a sharp optical gap of 1.68, 1.72, and 1.64 eV, respectively, suggesting that these materials are semiconductors and suitable for efficient absorption of solar radiation in solar cell applications. IR spectra show no obvious absorption in the range 800-4000 cm(-)(1).     

Synthesis and structural characterization of the first quaternary plutonium thiophosphates: K(3)Pu(PS(4))(2) and APuP(2)S(7) (A = K, Rb, Cs)

The first quaternary plutonium metal thiophosphates have been synthesized by the reactive flux method and characterized by single-crystal X-ray diffraction: K(3)Pu(PS(4))(2) (I), KPuP(2)S(7) (II), RbPuP(2)S(7) (III), and CsPuP(2)S(7) (IV). All four compounds crystallize in the monoclinic space group P2(1)/c with Z = 4. Compound I has cell parameters of a = 9.157(1) A, b = 16.866(2) A, c = 9.538(1), and beta = 90.610(3)degrees. Compound II has cell parameters of a = 9.641(1) A, b = 12.255(1) A, c = 9.015(1) A, and beta = 90.218(1)degrees. Compound III has cell parameters of a = 9.8011(6) A, b = 12.3977(7) A, c = 9.0263(5) A, and beta = 90.564(1)degrees. Compound IV has cell parameters of a = 10.1034(7) A, b = 12.5412(9) A, c = 9.0306(6) A, and beta = 91.007(1)degrees. Compound I is isostructural to a family of rare-earth metal thiophosphates and comprises bicapped trigonal prismatic PuS(8) polyhedra linked in chains through edge-sharing interactions and through thiophosphate tetrahedra. Compounds II-IV crystallize in a known structure type not related to any previously observed actinide thiophosphates and contain the (P(2)S(7))(4-) corner-shared bitetrahedral ligand as a structural building block. A summary of important bond distances and angles for these new plutonium thiophosphate materials is compared to the limited literature on plutonium solid-state compounds. Diffuse reflectance spectra confirm the Pu(III) oxidation state and Raman spectroscopy confirms the tetrahedral PS(4)(3-) building block in all structures.     

A U(V) chalcogenide: synthesis, structure, and characterization of K2Cu3US5

The compound K2Cu3US5 was obtained by the reaction of K2S, UCl4, CuCl, and S at 973 K. K2Cu3US5 crystallizes in a new structure type in space group Cmcm of the orthorhombic system in a cell of dimensions a = 3.9374(6) A, b = 13.813(2) A, c = 17.500(3) A, and V = 951.8(2) A3 at 153 K. The structure comprises (2)(infinity)[UCu3S52-] slabs separated by K+ cations. The slabs are built from CuS4 tetrahedra and US6 octahedra. Their connectivity differs from other known octahedral/tetrahedral packing patterns. In the temperature range 130-300 K the compound exhibits Curie-Weiss magnetic behavior with mu(eff) = 2.45(8) mu(B). This result together with both the bond distances and bond valence calculations and the absence of a Cu2+ ESR signal support the formulation of the above compound as K+2Cu+3U5+S2-5.     

Synthesis and characterization of six new quaternary actinide thiophosphate compounds: Cs(8)U(5)(P(3)S(10))(2)(PS(4))(6)(,) K(10)Th(3)(P(2)S(7))(4)(PS(4))(2), and A(5)An(PS(4))(3), (A = K, Rb, Cs; An = U, Th)

Six new actinide metal thiophosphates have been synthesized by the reactive flux method and characterized by single-crystal X-ray diffraction: Cs(8)U(5)(P(3)S(10))(2)(PS(4))(6) (I), K(10)Th(3)(P(2)S(7))(4)(PS(4))(2) (II), K(5)U(PS(4))(3) (III), K(5)Th(PS(4))(3) (IV), Rb(5)Th(PS(4))(3) (V), and Cs(5)Th(PS(4))(3) (VI). Compound I crystallizes in the monoclinic space group P2(1)/c with a = 33.2897(1) A, b = 14.9295(1) A, c = 17.3528(2) A, beta = 115.478(1) degrees, Z = 8. Compound II crystallizes in the monoclinic space group C2/c with a = 32.8085(6) A, b = 9.0482(2) A, c = 27.2972(3) A, beta = 125.720(1) degrees, Z = 8. Compound III crystallizes in the monoclinic space group P2(1)/c with a = 14.6132(1) A, b = 17.0884(2) A, c = 9.7082(2) A, beta = 108.63(1) degrees, Z = 4. Compound IV crystallizes in the monoclinic space group P2(1)/n with a = 9.7436(1) A, b = 11.3894(2) A, c = 20.0163(3) A, beta = 90.041(1) degrees, Z = 4, as a pseudo-merohedrally twinned cell. Compound V crystallizes in the monoclinic space group P2(1)/c with a = 13.197(4) A, b = 9.997(4) A, c = 18.189(7) A, beta = 100.77(1) degrees, Z = 4. Compound VI crystallizes in the monoclinic space group P2(1)/c with a = 13.5624(1) A, b = 10.3007(1) A, c = 18.6738(1) A, beta = 100.670(1) degrees, Z = 4. Optical band-gap measurements by diffuse reflectance show that compounds I and III contain tetravalent uranium as part of an extended electronic system. Thorium-containing compounds are large-gap materials. Raman spectroscopy on single crystals displays the vibrational characteristics expected for [PS(4)](3)(-), [P(2)S(7)](4-), and the new [P(3)S(10)](5)(-) building blocks. This new thiophosphate building block has not been observed except in the structure of the uranium-containing compound Cs(8)U(5)(P(3)S(10))(2)(PS(4))(6).     

Syntheses,structures, and properties of the bis(cyclopentadienyl) rare-earth imidodiphosphinochalocogenido compounds Cp2Ln[N(QPPh2)2] (Ln = La,Gd, Er,or Yb for Q = Se; Ln = Yb for Q = S)

The compounds Cp2Ln[N(QPPh2)2] (Ln = La (1), Gd (2), Er (3), or Yb (4) for Q = Se, Ln = Yb (5) for Q = S) have been synthesized from the corresponding rare-earth tris(cyclopentadienyl) compound and H[N(QPPh2)2]. The structures of compounds 1, 2, 3, and 5, as determined by X-ray crystallography, consist of a Cp2Ln fragment, coordinated eta 3 through two chalcogen atoms and an N atom of the imidodiphosphinochalcogenido ligand [N(QPPh2)2]-. In compound 4, the Cp2Yb moiety is coordinated eta 2 through the two Se atoms of the [N(SePPh2)2]-ligand. 31P and 77Se (for 1) NMR spectroscopies lend insight into the solution nature of these species. Crystal data: 1, C34H30LaNP2Se2, triclinic, P1, a = 9.7959(10) A, b = 12.4134(13) A, c = 13.9077(14) A, alpha = 88.106(2) degrees, beta = 88.327(2) degrees, gamma = 68.481(2) degrees, V = 1572.2(3) A3, T = 153 K, Z = 2, and R1(F) = 0.0257 for the 5947 reflections with I > .2 sigma(I); 2, C34H30GdNP2Se2, triclinic, P1, a = 9.7130(14) A, b = 12.2659(17) A, c = 13.953(2) A, alpha = 88.062(2) degrees, beta = 87.613(2) degrees, gamma = 69.041(2) degrees, V = 1550.7(4) A3, T = 153 K, Z = 2, and R1(F) = 0.0323 for the 5064 reflections with I > 2 sigma(I); 3, C34H30ErNP2Se2, triclinic, P1, a = 9.704(2) A, b = 12.222(3) A, c = 13.980(4) A, alpha = 88.230(4) degrees, beta = 87.487(4) degees, gamma = 69.107(4) degrees, V = 1547.4(7) A3, T = 153 K, Z = 2, and R1(F) = 0.0278 for the 6377 reflections with I > 2 sigma(I); 4, C34H30NP2Se2Yb.C4H8O, triclinic, P1, a = 12.087(4) A, b = 12.429(4) A, c = 23.990(7) A, alpha = 89.406(5) degrees, beta = 86.368(5) degrees, gamma = 81.664(5) degrees, V = 3558.8(18) A3, T = 153 K, Z = 4, and R1(F) = 0.0321 for the 11,883 reflections with I > 2 sigma(I); and 5, C34H30NP2S2Yb, monoclinic, P21/n, a = 13.8799(18) A, b = 12.6747(16) A, c = 17.180(2) A, beta = 91.102(3) degrees, V = 3021.8(7) A3, T = 153 K, Z = 4, and R1(F) = 0.0218 for the 6698 reflections with I > 2 sigma(I).     

Three new phases in the K/Cu/Th/S system: KCuThS3, K2Cu2ThS4, and K3Cu3Th2S7

Synthetic exploration of K/Cu/Th/S quaternary phase space has yielded three new compounds: KCuThS3 (I), K2Cu2ThS4 (II), and K3Cu3Th2S7 (III). All three phases are semiconductors with optical band gaps of 2.95, 2.17, and 2.49 eV(I-III). Compound I crystallizes in the orthorhombic space group Cmcm with a = 4.076(1) A, b = 13.864(4) A, and c = 10.541(3) A. Compound II crystallizes in the monoclinic space group C2/m with a = 14.522(1) A, b = 4.026(3) A, and c = 7.566(6) A; beta = 109.949(1) degrees . Compound III crystallizes in orthorhombic space group Pbcn with a = 4.051(2) A, b = 14.023(8) A, and c = 24.633(13) A. The compounds are all layered materials, with each layer composed of threads of edge-sharing ThS6 octahedra bridged by CuS4 tetrahedral threads of varying dimension. The layers are separated by well-ordered potassium ions. The relatively wide range of optical band gaps is attributed to the extent of the CuS4 motifs. As the dimension of the CuS4 chains increases, band gaps decrease in the series. All materials were characterized by single-crystal X-ray diffraction, microprobe chemical analysis, and diffuse reflectance spectroscopy (NIR-UV).     

Syntheses, structure, and selected physical properties of CsLnMnSe3 (Ln = Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Y) and AYbZnQ3 (A = Rb, Cs; Q = S, Se, Te)

CsLnMnSe(3) (Ln = Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Y) and AYbZnQ(3) (A = Rb, Cs; Q = S, Se, Te) have been synthesized from solid-state reactions at temperatures in excess 1173 K. These isostructural materials crystallize in the layered KZrCuS(3) structure type in the orthorhombic space group Cmcm. The structure is composed of LnQ(6) octahedra and MQ(4) tetrahedra that share edges to form [LnMQ(3)] layers. These layers stack perpendicular to [010] and are separated by layers of face- and edge-sharing AQ(8) bicapped trigonal prisms. There are no Q-Q bonds in the structure of the ALnMQ(3) compounds so the formal oxidation states of A/Ln/M/Q are 1+/3+/2+/2-. The CsLnMnSe(3) materials, with the exception of CsYbMnSe(3), are Curie-Weiss paramagnets between 5 and 300 K. The magnetic susceptibility data for CsYbZnS(3), RbYbZnSe(3), and CsYbMSe(3) (M = Mn, Zn) show a weak cusp at approximately 10 K and pronounced differences between field-cooled and zero-field-cooled data. However, CsYbZnSe(3) is not an antiferromagnet because a neutron diffraction study indicates that CsYbZnSe(3) shows neither long-range magnetic ordering nor a phase change between 4 and 295 K. Nor is the compound a spin glass because the transition at 10 K does not depend on ac frequency. The optical band gaps of the (010) and (001) crystal faces for CsYbMnSe(3) are 1.60 and 1.59 eV, respectively; the optical band of the (010) crystal faces for CsYbZnS(3) and RbYbZnSe(3) are 2.61 and 2.07 eV, respectively.     

Ternary rare-earth selenides with the U3ScS6 structure type: synthesis,characterization, and some magnetic properties of Ln3TSe6 (Ln = Sm,Gd; T = In,Cr) and Tb3CrSe6

The new compounds Ln3TSe6 (Ln = Sm, Gd; T = In, Cr) and Tb3CrSe6 have been synthesized by the solid-state reactions of the elements at 850 degrees C. A KBr flux was used to promote crystal growth. These isostructural compounds crystallize with the U3ScS6 structure type. The crystal structure is built from LnSe7 pseudo-octahedra or LnSe8 bicapped trigonal prisms and TSe6 octahedra. Magnetic measurements show that Sm3TSe6 (T = In, Cr) and Tb3CrSe6 are paramagnetic down to 5 K whereas Gd3CrSe6 undergoes an antiferromagnetic transition at 10 K. Crystal data: orthorhombic, Pnnm, Z = 4, T = -120 degrees C, (compound, a (A), b (A), c (A))-Sm3InSe6, 14.177(3), 17.352(4), 4.0625(8); Gd3InSe6, 14.071(3), 17.286(4), 4.0202(8); Sm3CrSe6, 14.032(3), 16.782(3), 3.9841(8); Gd3CrSe6, 13.938(3), 16.780(3), 3.9559(8); Tb3CrSe6, 13.885(3), 16.672(3), 3.9215(8).     

Ternary arsenides A2Zn2As3 (A = Sr, Eu) and their stuffed derivatives A2Ag2ZnAs3

The ternary arsenides A(2)Zn(2)As(3) and the quaternary derivatives A(2)Ag(2)ZnAs(3) (A = Sr, Eu) have been prepared by stoichiometric reaction of the elements at 800 °C. Compounds A(2)Zn(2)As(3) crystallize with the monoclinic Ba(2)Cd(2)Sb(3)-type structure (Pearson symbol mC28, space group C2/m, Z = 4; a = 16.212(5) ?, b = 4.275(1) ?, c = 11.955(3) ?, β = 126.271(3)° for Sr(2)Zn(2)As(3); a = 16.032(4) ?, b = 4.255(1) ?, c = 11.871(3) ?, β = 126.525(3)° for Eu(2)Zn(2)As(3)) in which CaAl(2)Si(2)-type fragments, built up of edge-sharing Zn-centered tetrahedra, are interconnected by homoatomic As-As bonds to form anionic slabs [Zn(2)As(3)](4-) separated by A(2+) cations. Compounds A(2)Ag(2)ZnAs(3) crystallize with the monoclinic Yb(2)Zn(3)Ge(3)-type structure (Pearson symbol mC32, space group C2/m; a = 16.759(2) ?, b = 4.4689(5) ?, c = 12.202(1) ?, β = 127.058(1)° for Sr(2)Ag(2)ZnAs(3); a = 16.427(1) ?, b = 4.4721(3) ?, c = 11.9613(7) ?, β = 126.205(1)° for Eu(2)Ag(2)ZnAs(3)), which can be regarded as a stuffed derivative of the Ba(2)Cd(2)Sb(3)-type structure with additional transition-metal atoms in tetrahedral coordination inserted to link the anionic slabs together. The Ag and Zn atoms undergo disorder but with preferential occupancy over four sites centered in either tetrahedral or trigonal planar geometry. The site distribution of these metal atoms depends on a complex interplay of size and electronic factors. All compounds are Zintl phases. Band structure calculations predict that Sr(2)Zn(2)As(3) is a narrow band gap semiconductor and Sr(2)Ag(2)ZnAs(3) is a semimetal. Electrical resistivity measurements revealed band gaps of 0.04 eV for Sr(2)Zn(2)As(3) and 0.02 eV for Eu(2)Zn(2)As(3), the latter undergoing an apparent metal-to-semiconductor transition at 25 K.     

A Comparative Study of Two New Structure Types. Synthesis and Structural and Electronic Characterization of K(RE)P(2)Se(6) (RE = Y, La, Ce, Pr, Gd)

Two polytypes of potassium rare-earth-metal hexaselenodiphosphates(IV), K(RE)P(2)Se(6) (RE = Y, La, Ce, Pr, Gd), have been synthesized from the stoichiometric reaction of RE, P, Se, and K(2)Se(4) at 750 degrees C. Both single-crystal and powder X-ray diffraction analyses showed that the structures of these polytypes vary with the size of the rare earth metals. For the smaller rare-earth metals, Y and Gd, K(RE)P(2)Se(6) crystallized in the orthorhombic space group P2(1)2(1)2(1). The yttrium compound was studied by single-crystal X-ray diffraction with the cell parameters a = 6.7366(5) ?, b = 7.4286(6) ?, c = 21.603(2) ?, and Z = 4. This structure type comprises a layered, square network of yttrium atoms that are bound to four distinct [P(2)Se(6)](4)(-) units through selenium bonding. Each [P(2)Se(6)](4)(-) unit possesses a Se atom that is not bound to any Y atom but is pointing out into the interlayer spacing, into an environment of potassium cations. For larger rare-earth metals, La, Ce, and Pr, K(RE)P(2)Se(6) crystallized in a second, monoclinic polytype, the structure of which has been published. Both of these two different polytypes can be related to each other and several other isoelectronic chalcophosphate structures based on a Parthé valence electron concentration analysis. These structures include Ag(4)P(2)S(6), K(2)FeP(2)S(6), and the hexagonal M(II)PS(3) structure types. The magnetic susceptibilities of the title compounds have been studied, and the behavior can been explained based on a simple set of unpaired f-electrons. The diffuse reflectance spectroscopy also showed that these yellow plates are moderately wide band gap ( approximately 2.75 eV) semiconductors.     

Rb(4)Hg(5)(Te(2))(2)(Te(3))(2)Te(3), [Zn(en)3](4)In(16)(Te2)4(Te3)Te22, and K2Cu2(Te2)(Te3): novel metal polytellurides with unusual metal-tellurium coordination

Three novel metal polytellurides Rb(4)Hg(5)(Te(2))(2)(Te(3))(2)Te(3) (I), [Zn(en)(3)](4)In(16)(Te(2))(4)(Te(3))Te(22) (II), and K(2)Cu(2)(Te(2))(Te(3)) (III) have been prepared by solvothermal reactions in superheated ethylenediamine at 160 degrees C. Their crystal structures have been determined by single-crystal X-ray diffraction techniques. Crystal data for I: space group Pnma, a = 9.803(2) A, b = 9.124(2) A, c = 34.714(7) A, Z = 4. Crystal data for II: space group C2/c, a = 36.814(7) A, b = 16.908(3) A, c = 25.302(5) A, beta = 128.46(3) degrees, Z = 4. Crystal data for III: space group Cmcm, a = 11.386(2) A, b = 7.756(2) A, c = 11.985(2) A, Z = 4. The crystal structure of I consists of 1D infinite ribbons of [Hg(5)(Te(2))(2)(Te(3))(2)Te(3)](4-), which are composed of tetrahedral HgTe(4) and trigonal HgTe(3) units connected through the bridging Te(2-), (Te(2))(2-), and (Te(3))(2-) ligands. II is a layered compound containing InTe(4) tetrahedra that share corners and edges via Te, Te(2), and Te(3) units to form a 2D slab that contains relatively large voids. The [Zn(en)(3)](2+) template cations are filled in these voids and between the slabs. The primary building blocks of III are CuTe(4) tetrahedra that are linked by intralayer (Te(3))(2-) and interlayer (Te(2))(2-) units to form a 3D network with open channels that are occupied by the K(+) cations. All three compounds are rare polytelluride products of solvothermal reactions that contain both Te(2) and Te(3) fragments with unusual metal-tellurium coordination.     

New Zr(6)MTe(2) (M = Mn, Fe, Co, Ni, Ru, Pt), Zr(6)Fe(0.6)Se(2.4), and Zr(6)Fe(0.57)S(2.43) Intermetallics: Structural Links between Binary (Zr,Hf)(3)M Alloys and Porous Metal-Rich Tellurides

The synthesis of the group IV ternary chalcogenides Zr(6)MTe(2) (M = Mn, Fe, Co, Ni, Ru, Pt) and Zr(6)Fe(1)(-)(x)()Q(2+)(x)() (Q = S, Se) is reported, as are the single-crystal structures of Zr(6)FeTe(2), Zr(6)Fe(0.6)Se(2.4), and Zr(6)Fe(0.57)S(2.43). The structure of Zr(6)FeTe(2) was refined in the hexagonal space group P&sixmacr;2m (No. 189, Z = 1) with lattice parameters a = 7.7515(5) ? and c = 3.6262(6) ?, and the structures of Zr(6)Fe(0.6)Se(2.4) and Zr(6)Fe(0.57)S(2.43) were refined in the orthorhombic space group Pnnm (No. 58, Z = 4) with lattice parameters a = 12.737(2) ?, b = 15.780(2) ?, and c = 3.5809(6) ? and a = 12.519(4) ?, b = 15.436(2) ?, and c = 3.4966(6) ?, respectively. The cell parameters of Mn-, Co-, Ni-, Ru-, and Pt-containing tellurides were also determined. The Zr(6)ZTe(2) compounds are isostructural with Zr(6)CoAl(2), while Zr(6)Fe(1)(-)(x)()Q(2+)(x)() (Q = S, Se) were found to adopt a variant of the Ta(2)P-type structure. Chains of condensed M-centered, tetrakaidecahedra of zirconium constitute the basic structural unit in all these compounds. The modes of cross-linking that give rise to the Zr(6)FeTe(2) and Zr(6)Fe(1)(-)(x)()Q(2+)(x)() structures, differences among the title compounds, and the influence of chalcogen size differences are discussed. The stoichiometric nature of Zr(6)FeTe(2) and its contrast with sulfur and selenium congeners apparently result from a Te-Fe size mismatch. The importance of stabilization of both Zr(6)FeSe(2) and Zr(6)FeTe(2) compounds by polar intermetallic Zr-Fe bonding is underscored by a bonding analysis derived from electronic band structure calculations.     

Lanthanide chalcogenolate complexes: synthesis and crystal structures of the isoleptic series [Sm(TpMe,Me)2ER] (E = O, S, Se, Te; TpMe,Me = tris-3,5-dimethylpyrazolylborate)

A series of lanthanide complexes containing a chalcogenolate ligand supported by two TpMe,Me (tris-3,5-dimethylpyrazolylborate) groups has been prepared and crystallized and provides direct comparisons of bonding to hard and soft ligands at lanthanide centers. Reaction of [Sm(TpMe,Me)2Cl] with NaOR (R = Ph, Ph-Bu(t)) gives [Sm(TpMe,Me)2OR] (1a and 1b, respectively) in good yields. Reductive cleavage of dichalcogenides by samarium(II) was used to prepare the heavier congeners. Complexes of the type [Sm(TpMe,Me)2ER] for E = S, R = Ph (2a), E = S, R = Ph-4-Me (2b), E = S, R = CH2Ph (2c), E = Se, R = Ph (3a), E = Se, R = Ph-4-Bu(t) (3b), E = Se, R = CH2Ph (3c), and E = Te, R = Ph (4) have been prepared together with the corresponding complexes with TpMe,Me,4-Et as ancillary. The X-ray crystal structures of 1b, 2b, 3a, 3b, and 4 have been determined. The crystal of 1b (C40H57B2N12OSm.C7H8) was monoclinic, P2(1)/c, a = 10.6845(6) A, b = 18.5573(11) A, c = 24.4075(14) A, beta = 91.616(2) degrees, Z = 4. The crystal of 2b (C37H51B2N12SSm) was monoclinic, P2(1)/n, a = 15.0154(9) A, b = 13.1853(8) A, c = 21.1254(13) A, beta = 108.628(2) degrees, Z = 4. The crystal of 3a (C36H49B2N12SeSm.C7H8) was triclinic, P1, a = 10.7819(6) A, b = 19.3011(10) A, c = 23.0235(12) A, alpha = 79.443(2) degrees, beta = 77.428(2) degrees, gamma = 89.827(2) degrees, Z = 4. The crystal of 3b (C40H57B2N12SeSm) was triclinic, P1, a = 10.1801(6) A, b = 10.2622(6) A, c = 23.4367(14) A, alpha = 88.313(2) degrees, beta = 86.268(2) degrees, gamma = 62.503(2) degrees, Z = 2. The crystal of 4 (C36H49B2N12TeSm.C7H8) was monoclinic, P2(1)/c, a = 18.7440(10) A, b = 10.3892(6) A, c = 23.8351(13) A, beta = 94.854(2) degrees, Z = 4. The compounds form an isoleptic series of seven-coordinate complexes with terminal chalcogenolate ligands. Examination of 1b and other crystallographically characterized lanthanide alkoxides suggests that there is little correlation between bond angle and bond length. The structures of 3a and 3b, however, contain molecules in which one of the pyrazolylborate ligands undergoes a major distortion arising from twisting around a B-N bond so as to give an effectively eight-coordinate complex with pi-stacking of the phenyl group with one pyrazolyl ring. These distortions shed light on the fluxionality of these systems.     

New quaternary bismuth sulfides: syntheses,structures, and band structures of AMBiS4 (A = Rb,Cs; M = Si,Ge)

Four new compounds, RbSiBiS(4), RbGeBiS(4), CsSiBiS(4), and CsGeBiS(4), have been synthesized by means of the reactive flux method. The isostructural compounds RbSiBiS(4), RbGeBiS(4), and CsGeBiS(4) crystallize in space group P2(1)/c of the monoclinic system with four formula units in cells of dimensions at 153 K of a = 6.4714(4) A, b = 6.7999(4) A, c = 17.9058(11) A, and beta = 108.856(1) degrees for RbSiBiS(4), a = 6.5864(4) A, b = 6.8559(4) A, c = 17.9810(12) A, and beta = 109.075(1) degrees for RbGeBiS(4), and a = 6.5474(4) A, b = 6.9282(4) A, c = 18.8875(11) A, and beta = 110.173(1) degrees for CsGeBiS(4). CsSiBiS(4) crystallizes in a different structure type in space group P2(1)/c of the monoclinic system with four formula units in a cell of dimensions at 153 K of a = 9.3351(7) A, b = 6.9313(5) A, c = 12.8115(10) A, and beta = 109.096(1) degrees. The two structure types are closely related and consist of [MBiS(4)(-)] (M = Si, Ge) layers separated by bicapped trigonal-prismatically coordinated alkali-metal atoms. In each, the M atom is coordinated to a tetrahedron of four S atoms and the Bi atom is coordinated to seven S atoms comprising five close S atoms at the corners of a square pyramid with Bi near the center of the basal plane and the sixth and seventh S atoms further away to complete a distorted monocapped trigonal prism. The optical band gaps of 2.23 eV for RbGeBiS(4) and 2.28 eV for CsGeBiS(4) were deduced from their diffuse reflectance spectra. From a band structure calculation, the optical absorption for RbGeBiS(4) originates from the [GeBiS(4)(-)] layer. The Ge 4p orbitals, Bi 6p orbitals, and S 3p orbitals are highly hybridized.     

Syntheses, structures, magnetism, and optical properties of lutetium-based interlanthanide selenides

Ln3LuSe6 (Ln = La, Ce), beta-LnLuSe3 (Ln = Pr, Nd), and LnxLu4-xSe6 (Ln = Sm, Gd; x = 1.82, 1.87) have been synthesized using a Sb2Se3 flux at 1000 degrees C. Ln3LuSe6 (Ln = La, Ce) adopts the U3ScS6-type three-dimensional structure, which is constructed from two-dimensional 2(infinity)[Ln3Se6](3-) slabs with the gaps between these slabs being filled by octahedrally coordinated Lu(3+) ions. The series of beta-LnLuSe3 (Ln = Pr, Nd) are isotypic with UFeS3. Their structures include layers formed from LuSe6 octahedra that are separated by eight-coordinate Ln(3+) (Ln = Pr, Nd) ions in bicapped trigonal prismatic environments. Sm1.82Lu2.18Se6 and Gd1.87Lu2.13Se6 crystallize in the disordered F-Ln2S3 type structure with the eight-coordinate bicapped trigonal prismatic Ln(1) ions residing in the one-dimensional channels formed by three different double chains via edge- and corner-sharing. These double chains are constructed from Ln(2)Se7 monocapped trigonal prisms, Ln(3)Se6 octahedra, and Ln(4)S6 octahedra, respectively. The magnetic susceptibilities of beta-PrLuSe3 and beta-NdLuSe3 follow the Curie-Weiss law. Sm1.82Lu2.18Se6 shows van Vleck paramagnetism. Magnetic susceptibility measurements show that Gd1.87Lu2.13Se6 undergoes an antiferromagnetic transition around 4 K. Ce3LuSe6 exhibits soft ferromagnetism below 5 K. The optical band gaps for La3LuSe6, Ce3LuSe6, beta-PrLuSe3, beta-NdLuSe3, Sm1.82Lu2.18Se6, and Gd1.87Lu2.13Se6 are 1.26, 1.10, 1.56, 1.61, 1.51, and 1.56 eV, respectively.     

Synthesis, structure, and multi-NMR studies of (Me4N)[A(M(SC(O)Ph)3)2] (A = Na, M = Hg; A = K, M = Cd or Hg)

The compounds (Me4N)[A(M(SC(O)Ph)3)2] (A = K, M = Cd (2); A = Na, M = Hg (3); and A = K, M = Hg (4)) were synthesized by reacting the appropriate metal chloride with A+PhC(O)S- and Me4NCl in the ratios 1:3:1 and 2:6:1. The structures of these compounds were determined by single-crystal X-ray diffraction methods. All the compounds are isomorphous, isostructural, and crystallized in the space group P1 with Z = 1. Single-crystal data for 2: a = 106670(2) A, b = 111522(2) A, c = 119294(2) A, alpha = 71782(1) degrees, beta = 85208(1) degrees, gamma = 69418(1) degrees, V = 126140(4) A3, Dcalc = 1528 g cm-3. Single-crystal data for 3: a = 10840(2) A, b = 10946(4) A, c = 12006(3) A, alpha = 7218(2) degrees, beta = 8675(2) degrees, gamma = 6743(2) degrees, V = 12493(6) A3, Dcalc = 1756 g cm-3. Single-crystal data for 4: a = 104780(1) A, b = 112563(2) A, c = 119827(2) A, alpha = 71574(1) degrees, beta = 85084(1) degrees, gamma = 70705(1) degrees, V = 126523(3) A3, Dcalc = 1755 g cm-3. In the [A(M(SC(O)Ph)3)2]- anions, each M(II) atom is bonded to three thiobenzoate ligands through sulfur atoms, giving a trigonal planar MS3 geometry. The carbonyl oxygen atoms from the two [M(SC(O)Ph)3]- anions are bonded to the alkali metal atom, providing an octahedral environment. Solution metal NMR studies showed the concentration-dependent dissociation of the alkali metal ions in the trinuclear anions.