Hydrodynamic voltammetry at the liquid|liquid interface: facilitated ion transfer and the rotating diffusion cell

A new approach to the voltammetric investigation of facilitated ion transfer processes is reported. The technique uses a rotating diffusion cell approach to induce laminar flow in the organic phase of a liquid|liquid electrochemical cell. The interface between two immiscible electrolyte solutions (ITIES) was stabilised against rotation with either γ-alumina or a track-etched polyester membrane. The resultant voltammetry is shown to be consistent with the Koutecký–Levich equation enabling kinetic parameters associated with facilitated transfer of sodium by dibenzo-18-crown-6 across the water|1,2-dichloroethane interface to be evaluated. In particular, the use of the more hydrophilic alumina membrane permits the uncertainties regarding the use of the membrane-stabilised ITIES, namely the interfacial position, to be eliminated.     

Electrochemical properties of gold nanoparticles assembly at polarised liquid|liquid interfaces

Capacitance measurements of a polarised liquid|liquid interface show that the capacitance of the interface increases in the presence of an adsorbed monolayer of citrate-coated gold nanoparticles. This unusual observation can be explained by an increase of the interfacial charge density or by an increase of the interfacial corrugation. This study shows that capacitance measurements provide a method to monitor metallic film formation at ITIES.     

Probing TCNQ‐mediated Metal Reduction Reactions at Liquid‐liquid Interface with SECM

Metal reduction at the interface between two immiscible electrolyte solutions (ITIES) has been studied with scanning electrochemical microscopy (SECM). Metal cations in the aqueous phase are reduced by 7,7,8,8‐tetracyanoquinodimethane anion (TCNQ^?) residing in the oil phase, methyl isobutyl ketone (MIBK). TCNQ^? is formed at the SECM tip by reducing TCNQ, which results in a positive feedback loop between the tip and the ITIES when an electron is donated to a metal cation. The effect of the Galvani potential difference on the rate of the interfacial electron transfer was investigated, establishing the potential difference either by an additional substrate electrode in the aqueous phase or by an a common ion in both phases. It is shown that the Galvani potential difference as a driving force does enable TCNQ^? mediated Cu²⁺ reduction. Finite element method (FEM) simulations were run to provide information on the reaction kinetics and stoichiometry.     

Thermodynamic analysis of the cation binding to a phosphatidylcholine monolayer at a polarised interface between two immiscible electrolyte solutions

Thermodynamic analysis of the polarised interface between two immiscible electrolyte solutions (ITIES) was outlined, which accounts for the adsorption of phosphatidylcholine (PC) both as a zwitterion and a cation formed by the aqueous cation association with the zwitterionic PC form, as well as for the aqueous cation transfer facilitated by PC leading to its depletion from the interface. Electrocapillary equation was derived clarifying the physical significance of the surface charge density; the differential capacity and the PC surface excess concentration. The potential dependence of the interfacial tension calculated using the Damaskin’s adsorption model of a compound adsorbed in two different forms was found to agree well with that measured for the polarised water|1,2-dichloroethane interface in the presence of dl-α-dipalmitoylphosphatidylcholine. Experimentally observed effect of the nature of the aqueous cation on the interfacial tension was ascribed to the difference in the PC association constant.     

Electrochemical heparin sensing at liquid/liquid interfaces and polymeric membranes

The monitoring of heparin and its derivatives in blood samples is important for the safe usage of these anticoagulants and antithrombotics in many medical procedures. Such an analytical task is, however, highly challenging due to their low therapeutic levels in the complex blood matrix, and it still relies on classical, indirect, clot-based assays. Here we review recent progress in the direct electrochemical sensing of heparin and its analogs at liquid/liquid interfaces and polymeric membranes. This progress has been made by utilizing the principle of electrochemical ion transfer at the interface between two immiscible electrolyte solutions (ITIES) to voltammetrically drive the interfacial transfer of polyanionic heparin and monitoring the resulting ionic current as a direct measure of heparin concentration. The sensitivity, selectivity, and reproducibility of the ion-transfer voltammetry of heparin are dramatically enhanced compared to those of traditional potentiometry. This voltammetric principle was successfully applied for the detection of heparin in undiluted blood samples, and was used to develop highly sensitive ion-selective electrodes based on thin polymeric membranes that are intended for analytical applications beyond heparin detection. The mechanism of heparin recognition and transfer at liquid/liquid interfaces was assessed quantitatively via sophisticated micropipet techniques, which aided the development of a powerful ionophore that can extract large heparin molecules into nonpolar organic media. Moreover, the reversible potentiometric detection of a lethal heparin-like contaminant in commercial heparin preparations was achieved through the use of a PVC membrane doped with methyltridodecylammonium chloride, which enables charge density dependent polyanion selectivity.     

Optimisation of the conditions for stripping voltammetric analysis at liquid–liquid interfaces supported at micropore arrays: a computational simulation

Micropore membranes have been used to form arrays of microinterfaces between immiscible electrolyte solutions (μITIES) as a basis for the sensing of non-redox-active ions. Implementation of stripping voltammetry as a sensing method at these arrays of μITIES was applied recently to detect drugs and biomolecules at low concentrations. The present study uses computational simulation to investigate the optimum conditions for stripping voltammetric sensing at the μITIES array. In this scenario, the diffusion of ions in both the aqueous and the organic phases contributes to the sensing response. The influence of the preconcentration time, the micropore aspect ratio, the location of the microinterface within the pore, the ratio of the diffusion coefficients of the analyte ion in the organic and aqueous phases, and the pore wall angle were investigated. The simulations reveal that the accessibility of the microinterfaces during the preconcentration period should not be hampered by a recessed interface and that diffusional transport in the phase where the analyte ions are preconcentrated should be minimized. This will ensure that the ions are accumulated within the micropores close to the interface and thus be readily available for back transfer during the stripping process. On the basis of the results, an optimal combination of the examined parameters is proposed, which together improve the stripping voltammetric signal and provide an improvement in the detection limit.     

Electrochemical Properties of Phospholipid Monolayers at Liquid–Liquid Interfaces

Biomembrane models built at the interface between two immiscible electrolytes (ITIES) are useful systems to study phenomena of biological relevance by means of their electrochemical processes. The unique properties of ITIES allow one either to control or measure the potential difference across the biomimetic membranes. Herein we focus on phospholipid monolayers adsorbed at liquid–liquid interfaces, and besides discussing recent developments on the subject, we describe electrochemical techniques that can be used to get insight on the interfacial processes and electrostatic properties of phospholipid membranes at the ITIES. In particular, we examine the electrochemical and physicochemical properties of (modified) phospholipid monolayers and their interaction with other biologically relevant compounds. The use of liquid–liquid electrochemistry as a powerful tool to characterize drug properties is outlined. Although this review is not a survey of all the work in the field, it provides a comprehensive referencing to current research.     

Polarised liquid/liquid micro-interfaces move during charge transfer

The externally polarised micro-interface between two immiscible electrolyte solutions (ITIES) has been visualised during ion transfer using confocal laser scanning microscopy (CLSM). A water|1,2-dichloroethane (DCE) micro-interface was formed at the tip of a glass micropipette. The DCE phase contained Nile Red, a fluorophore, which was used to visualise movements in the interface with CLSM. During voltammetric transfer of tetraethylammonium cation from the aqueous phase to DCE (in the micropipette), the interface – with and without adsorbed lipid – was found to undergo significant expansion. The movement of the interface was found to be completely reversible and rapid, as evident from potential step measurements. The studies reported herein have implications for studies of charge transfer at micro-ITIES which generally assume a static interface.     

Melittin adsorption and lipid monolayer disruption at liquid-liquid interfaces

Melittin, a membrane-active peptide with antimicrobial activity, was investigated at the interface formed between two immiscible electrolyte solutions (ITIES) supported on a metallic electrode. Ion-transfer voltammetry showed well-defined semi-reversible transfer peaks along with adsorptive peaks. The reversible adsorption of melittin at the liquid-liquid interface is qualitatively discussed from voltammetric data and experimentally confirmed by real-time image analysis of video snapshots. It is also demonstrated that polarization of the water/1,2-DCE interface results in drastic drop shape variations caused by large variations of the interfacial tension. The experimental data also confirmed that maximum adsorption occurs near the ion transfer potential. Finally, the interaction of melittin with a monolayer of L-α-dipalmitoyl phosphatidylcholine (DPPC) was also investigated showing that melittin destabilizes the lipidic monolayer facilitating its desorption. The non-covalent complex formation between melittin and DPPC was confirmed by mass spectrometry.     

Electrolysis at the interaface of two immiscible electrolyte solutions and extraction kinetics

The problem of the interfacial step of salt extraction has been solved using the ideas of the kinetics of individual ion transfer across the interface of two immiscible electrolyte solutions (ITIES). A new concept, the extraction potential has been introduced. The values of extraction rate constants for several tetraalkylammonium picrates have been presented.     

Two-phase photocatalysis mediated by electrochemically generated Pd nanoparticles

The properties of electrochemically generated interfacial palladium particles as novel reductive photocatalysts for liquid∣liquid reactions are introduced in the present contribution. The Pd particles were prepared at the interface between two immiscible electrolyte solutions (ITIES) by heterogeneously reducing ammonium tetrachloropalladate present in the aqueous phase by the electron donor ferrocene in 1,2-dichloroethane. As-deposited particles are shown to act as electron transfer mediators in the heterogeneous photoreduction of tetracyanoquinodimethane (TCNQ) by hydrophilic porphyrin species.     

Potentiometric investigation of the effect of the pH on the ionic transfer of some amino acids at the interface between two immiscible electrolyte solutions

The effect of the pH on the ionic transfer of glycine and beta-alanine at the interface between two immiscible electrolyte solutions (ITIES) was investigated by a simple potentiometric method. Upon addition of small amounts of solution containing the investigated amino acids, a variation of the potential drop across the interface was recorded, which was found to be pH-dependent. This behavior was explained in terms of a preferential orientation of the amino acid molecules at the ITIES, induced by the different lipoficility of the functional groups. The results enabled the measurement of this voltage variation to be used as the basis for a simple and rapid method for determining the isoelectric point of the investigated compounds. The agreement between the pH(i) values thus estimated and those reported in the literature suggests the possibility of using the method for the interpretation of processes occurring at the level of biological membranes.     

Investigation of Electrochemical Properties of Metalloporphyrin Species at the Liquid/Liquid Interface by Switching Substitutes on the Porphyrin Ring

In order to investigate the electrochemical properties of porphyrin complexes species in biological systems, metalloporphyrin with different substitutes was applied to observe the process of heterogeneous electron transfer (ET) at the interface between two immiscible electrolyte solutions (ITIES) by scanning electrochemical microscopy (SECM). Experimental results demonstrated that the process of electron transfer was affected dramatically by the presence of different substitutes. Our results also show that the rate constant follows Bulter? Volmer kinetics where the rate increases with increasing force at the low driving force, and Marcus inverted region kinetics at the high driving force where the rate decreases.     

Cyclic voltammetry of highly hydrophilic ions at a supported liquid membrane

Cyclic voltammetry has been used to study the coupling of ion transfer reactions at a liquid membrane. The liquids are either supported by a porous hydrophobic membrane (polyvinylidene difluoride, PVDF) when the organic solvent is non-volatile (o-nitrophenyloctylether) or are merely a free standing organic solvent layer such as 1,2-dichloroethane comprised between two hydrophilic dialysis membranes supporting the adjacent aqueous phases. The passage of current across the liquid membrane is associated with two ion transfer reactions across the two polarised liquid liquid interfaces in series. It is shown that it is possible to study the transfer of highly hydrophilic ions at one interface by limiting the mass transfer of the other ion transfer reaction at the other interface. Indeed, for systems comprising an ion M in one aqueous phase and a reference ion R partitioned between the membrane and the other aqueous phase, the observed and simulated cyclic voltammograms have a half-wave potential determined by the Gibbs energy of transfer of M transferring at one interface and by the limiting mass transfer of R at the other interface. This new methodology opens a way to measure the Gibbs energy of transfer of highly hydrophilic or hydrophobic ions, which usually limits the potential window at single liquid liquid interfaces (ITIES).     

Thin-film voltammetry and its analytical applications: A review

Electrochemical reactions at the interfaces of immiscible electrolyte solutions (ITIES) are of fundamental importance in the fields of chemical, biological and pharmaceutical sciences. Four-electrode cell setup, scanning electrochemical microscopy (SECM) and thin-film voltammetry are the three most frequently used methods for studying the electrochemical processes at these interfaces. The principle, experimental design, advantages and challenges of the three methods are described and compared. The thin-film voltammetry is highlighted for its simplicity in experimental operation and kinetic data analysis. Its versatile analytical applications are discussed in detail, including the study of redox properties of hydrophobic compounds, evaluation of interfacial electron transfer kinetics, synthesis of nanoparticles/nanostructures, and illustration of cross-membrane ion transport phenomena.     

A Novel Micro—hole Electrode Used to Investigate Electron Transfer Reactions at ITIES

A novel micro-hole electrode was fabricated to investigate the electron transfer reaction at the interface between two immiscible electrolyte solutions (ITIES). The electron transfer reaction between feero/ferricyanide in aqueous phase(W) and ferrocene in 1,2-dichloroethane (O) phase was studied as a test experiment. The results showed that the diffusion coefficient obtained from the micro-hole electrode was consistent with that obtained at macro-interface. Due to its simplicity and the very small IR drop it will be a useful tool for the study of ITIES systems.     

Electrolysis at the Interface between Two Immiscible Electrolyte Solutions: Determination of Acetylcholine by Differential Pulse Stripping Voltammetry

Abstract

A three-electrode system with the hanging electrolyte drop electrode (HEDE) was developed for the analytical exploitation of electrolysis at the interface between two immiscible electrolyte solutions (ITIES). The use of the differential pulse stripping voltammetry (DPSV) for the quantitative determination of the species which participates in a charge transfer reaction at ITIES was demonstrated with acetylcholine cation transfer across the water/nitrobenzene interface. Trace concentration of acetylcholine in water in the part per million level (ppm) can be determined. It was concluded that the electrolysis at ITIES represents the perspective method of chemical analysis.     

Transfer of actinide ion at the interface between aqueous and nitrobenzene solutions studied by controlled-potential electrolysis at the interface

A novel electrochemical method based on controlled-potential electrolysis has been developed for the elucidation of the ion transfer at the interface between two immiscible electrolyte solutions (ITIES). A relationship between the applied interfacial potential (E_app) and the amount of the ion transferred (A_tr) was investigated after an electrolytic equilibrium was attained by controlled-potential electrolysis. The A_tr was determined chemically or radiometrically instead of by current measurement. It was found that (i) controlled-potential electrolysis was applicable to the study of the transfer of such hydrophilic ions as transition metal ions which gave no appreciable current within the potential window in voltammetry or polarography at ITIES, (ii) controlled-potential electrolysis in combination with a sensitive analytical method enabled a study of the transfer reaction of an ion of very dilute concentration, and (iii) even when the transfer reaction of an ion was irreversible or quasi-reversible, a standard ion transfer potential could be determined by controlled-potential electrolysis without using a kinetic parameter. The controlled-potential electrolysis method developed was applied to the transfer reactions of actinide ions such as UO₂ ²⁺ and Am³⁺ from aqueous solution to nitrobenzene solution in the absence or presence of an ionophore facilitating the transfer. The Gibbs energy for the transfer of actinide ion and a stability constant of the complex between an actinide ion and the ionophore in nitrobenzene solution were determined from log D versus E_app plots (D the ratio of the concentration of the ion in nitrobenzene solution to that in aqueous solution). The feasibility of controlled-potential electrolysis as a method for electrolytic separation of actinide ions is discussed.     

二苯并18冠6促进钾离子在微液-液界面上的迁移反应

本文研制出一种用于构造互不相溶电解质界面 (ITIES)的两亲性微孔电极 ,并对发生于该界面上的二苯并 18冠 6 (DB18C6 )促进钾离子的迁移反应进行了研究 ,计算其相关的反应参数 .实验证明 ,该方法操作简便 ,是研究ITIES界面上电荷迁移反应的一种有效工具     

Structure and reactivity of the polarised liquid–liquid interface: what we know and what we do not

Charge transfer phenomena at the interface between two immiscible electrolyte solutions (ITIES) are electrochemical reactions taking place in soft media. Owing to their liquid nature, the ITIES shows a large panel of electrochemical reactions including electron transfer reactions, ion transfer reactions, coupled electron–ion transfer reactions or biomimetic redox reactions. Nevertheless, the mechanisms by which these reactions proceed are yet to be fully understood. The goal of this short review is to summarise the work accomplished over the past decades towards the elucidation of the structure and reactivity at the ITIES, highlighting the main questions still to be answered.