Dynamics of CO in mesoporous silica monitored by time-resolved step-scan and rapid-scan FT-IR spectroscopy

Carbon monoxide molecules generated in the channels of mesoporous MCM-41 silica sieve from a precursor (diphenyl cyclopropenone) by photodissociation with a nanosecond laser pulse were monitored by time-resolved Fourier transform infrared (FTIR) spectroscopy using the step-scan and rapid-scan methods. A very broad absorption of CO is observed in the region 2200-2080 cm(-1) at room temperature that decays in a biphasic mode. Two-thirds of the band intensity decays on the hundreds of microsecond scale (lifetime 344 +/- 70 micros). The process represents the escape of the molecules through the mesopores into the surrounding gas phase, and a diffusion constant of 1.5 x 10(-9) m(2)/s is derived (assuming control by intra-MCM-41 particle diffusion). The broad profile of the absorption is attributed to contact of the random hopping CO with siloxane and silanol groups of the pore surface. Measurements using MCM-41 with the silanols partially capped by trimethyl silyl groups gave further insight into the nature of the IR band profile. These are the first observations on the diffusion behavior of carbon monoxide in a mesoporous material at room temperature. The residual carbon monoxide remains much longer in the pores and features distinct peaks at 2167 and 2105 cm(-1) characteristic for CO adsorbed on SiOH groups C end on and O end on, respectively. The bands decrease with time constants of 113 +/- 3 ms (2167 cm(-1)) and 155 +/- 15 ms (2105 cm(-1)) suggesting that CO in these sites is additionally trapped by surrounding diphenyl acetylene coproduct and/or precursor molecules.     

Synthesis of porphyrin-introduced silica gels by sol-gel process

Using a hydroxyl group appended free base porphyrin derivative (HP), porphyrin-introduced silica gels were synthesized by a sol-gel process. The HP content in the materials linearly increased with increasing the HP concentration. Meanwhile, free base tetraphenylporphyrin (TPP) with no hydroxyl groups were almost not incorporated into the silica gels. These facts suggested that the interaction between hydroxyl groups of the HP molecules and silica network is considerably strong. The UV-vis characters of HP-introduced materials were almost the same as pure HP molecules. The Beer's plot indicated that the HP molecules in the materials are dispersed.     

The composite material of perylene bisimide dye in MCM-41 and its photophysical and photochemical properties

The mesoporous material MCM-41 was synthesized by a hydrothermal method, and perylene bisimide dye was incorporated into its channels by impregnation. The absorption, FTIR, fluorescence emission, and decay spectra of perylene bisimide dye in CHCl₃ and in MCM-41 were studied to investigate the effect of the one-dimensional channel of MCM-41 on the photophysical and photochemical properties of the dye. The results indicated that the nanochannels of MCM-41 shifted the absorption and emission maxima to red and broadened the spectra, with loss of vibrational structure. The fluorescence decay curves fitted a double-exponential function and the lifetime of perylene bisimide dye in MCM-41 was prolonged. The huge surface area of the mesoporous molecular sieve MCM-41 prevented aggregation of dye molecules, which can thus be used at high concentration.     

Adsorption Behavior for CO on Modified MCM—41 with Zn and CuCl

The Zn-Cu(I)/HMCM-41 catalysts were successfully prepared in laboratory scale by solid-state ion exchange with CuCl salt,together with introduction of Zn to improve the dispersion degree of the active component Cu(I) on the surface. With increase of the amounts of Zn and CuCl from 0% to 9.0% and 25.0% respectively, CO adsorption the amounts of increased from 10.6μmol/g to 183.0μmol/g correspondingly. The in situ FT-IR spectra for CO adsorption demonstrated that there existed two dynamic equilibriums between surface carbonyl complexes:Cu(CO)3^ ←→Cu(CO)2^ CO and Cu(CO)2^ ←→Cu(CO)^ CO.The equilibriums can be shifted reversibly by changing the temperature and pressure.Due to the modified MCM-41 mesoporous materials possess both of the acidic and metallic carbonyl centers, this kind of material can be developed into mesoporous bifunctional catalysts for carbonylation reactions, in which larger molecules are involved.     

NMR provides checklist of generic properties for atomic-scale models of periodic mesoporous silicas

MCM-41 and SBA-15 silicas were studied by (29)Si solid-state NMR and (15)N NMR in the presence of (15)N-pyridine with the aim to formulate generic structural parameters that may be used as a checklist for atomic-scale structural models of this class of ordered mesoporous materials. High-quality MCM-41 silica constitutes quasi-ideal arrays of uniform-size pores with thin pore walls, while SBA-15 silica has thicker pore walls with framework and surface defects. The numbers of silanol (Q(3)) and silicate (Q(4)) groups were found to be in the ratio of about 1:3 for MCM-41 and about 1:4 for our SBA-15 materials. Combined with the earlier finding that the density of surface silanol groups is about three per nm(2) in MCM-41 (Shenderovich, et al. J. Phys. Chem. B 2003, 107, 11924) this allows us to discriminate between different atomic-scale models of these materials. Neither tridymite nor edingtonite meet both of these requirements. On the basis of the hexagonal pore shape model, the experimental Q(3):Q(4) ratio yields a wall thickness of about 0.95 nm for MCM-41 silica, corresponding to the width of ca. four silica tetrahedra. The arrangement of Q(3) groups at the silica surfaces was analyzed using postsynthesis surface functionalization. It was found that the number of covalent bonds to the surface formed by the functional reagents is affected by the surface morphology. It is concluded that for high-quality MCM-41 silicas the distance between neighboring surface silanol groups is greater than 0.5 nm. As a result, di- and tripodical reagents like (CH(3))(2)Si(OH)(2) and CH(3)Si(OH)(3) can form only one covalent bond to the surface. The residual hydroxyl groups of surface-bonded functional reagents either remain free or interact with other reagent molecules. Accordingly, the number of surface silanol groups at a given MCM-41 or SBA-15 silica may not decrease but increase after treatment with CH(3)Si(OH)(3) reagent. On the other hand, nearly all surface silanol groups could be functionalized when HN(Si(CH(3))(3))(2) was used.     

New Routes to the Synthesis of Mesoporous Materials and Their Properties

The factors that influence the hydrothermal synthesis of MCM-41 were investigated, and it was found that compared with those from high H₂O/SiO₂ systems(designated MCM-41-A), the products from low H₂O/SiO₂ systems(designated MCM-41-B) exhibited a less-defined X-ray powder diffraction (XRD) pattern with a broader main reflection peak at a lower 2θ diffraction angle. MCM-41-B possesses a smaller surface area but a larger pore size than MCM-41-A. New routes including direct thermal treatment, room-temperature crystallization and microwave heating were developed for the formation of MCM-41, and the properties of the products prepared from these new routes were compared with those of the MCM-41 hydrothermally synthesized. The pore sizes of MCM-41 materials are uniformly distributed with an effective pore diameter that falls into the range of 2-4 nm, where as the products from wet-gel thermal treatment possess two kinds of mesopores:the well-defined smaller pores distributed at 3 nm and the larger one within 8-20 nm. The MAS NMR spectroscopy revealed that after calcination to remove the organic template in Al-containing MCM-41, a small part of the tetrahedrally-coordinated framework aluminum atoms became octahedrally-coordinated and a considerable amount of Si-OH species were generated.     

Immobilization of palladium in mesoporous silica matrix: preparation, characterization, and its catalytic efficacy in carbon-carbon coupling reactions

Palladium(0) has been immobilized into the silica-based mesoporous material to develop catalyst Pd(0)-MCM-41, which is found to be highly active in carbon-carbon coupling reactions. [Pd(NH3)4]2+ ions have been incorporated into the mesoporous material during synthesis of MCM-41 and subsequently upon treatments with hydrazine hydrate Pd2+ ions present in mesoporous silica matrix were reduced to Pd(0) almost instantaneously. The catalyst has been characterized by small-angle X-ray diffraction, N2 sorption, and transmission electron microscopy (TEM). TEM and surface area measurements clearly demonstrate that the immobilization of Pd(0) into the mesoporous silica has a significant effect on pore structure of the catalyst. Nevertheless, after immobilization of palladium the meso-porosity of the material is retained, as evidenced in the nitrogen sorption measurement. The TEM micrograph shows that both MCM-41 and Pd(0)-MCM-41 have similar types of external surface morphology; however, Pd(0)-MCM-41 was less ordered. Pd(0)-MCM-41 showed high catalytic activity toward carbon-carbon bond formation reactions like Heck and Sonogashira coupling, as evidenced in high turn-over numbers. In contrast to many other Pd-based catalysts reported so far, Pd(0)-MCM-41 acts as a truly heterogeneous catalyst in C-C coupling reactions. Notably, the new heterogeneous catalyst is found to be efficient in the activation of arylchloride to give impressive conversion in cross coupling (15-45% for Heck and 30% for Sonogashira) reactions under mild conditions.     

Anchoring of 1,8-naphthalimide derivative into mesoporous MCM-41 molecular sieves

The fluorescent dye molecules, 4-piperidine-1,8-naphthalimide, were successfully fixed into the amino modified pore channel of mesoporous MCM-41 type materials by in situ reaction of 4-piperidinyl-1,8-naphthalic anhydride with the amino group. The formation of amide bonds on the pore surface was verified by infrared spectra. The maximum fluorescence emission peak of this hybrid material has a red shift of 13 nm compared to that of a naphthalimide derivative in ethanol solution. Moreover, the fluorescence intensity of dye molecules grafted into Ce-doped MCM-41 is higher than that in pure silica MCM-41. This phenomenon is attributed to the inhibited internal electron transfer from piperidine to naphthalimide groups by Ce⁴⁺, thus improving the fluorescence intensity of the naphthalimide group. The unique fluorescence behavior of the 1,8-naphthalimide derivative doped hybrid mesoporous material makes it a good candidate for the metal ions microdetection.     

磺酸基功能化MCM-41有机-无机杂化材料的合成与表征

 利用直接合成法和后接枝法将含有磺酸基团的硅烷偶联剂引入MCM-41介孔分子筛中, 合成了酸性介孔有机-无机杂化材料. 利用XRD和TEM等方法对其结构进行了表征. 结果表明,利用直接合成法和后接枝法合成的杂化材料仍保持规整的介孔孔道,该材料作为酸催化剂在苯甲醛与乙二醇的缩醛反应中显示了较好的催化活性.     

Metastability of MCM-41 and Al-MCM-41

The apparent stability of MCM-41 and Al-MCM-41 in water was appraised in a series of solubility experiments. MCM-41 is a siliceous, mesoporous material of hexagonal symmetry and exceptionally high surface area first synthesized in 1992. The dissolution experiments were carried out at several solid/water ratios: 1/200, 1/100, and 1/75. Results indicated that MCM-41 and Al-MCM-41 are more soluble than amorphous silica at ambient temperatures. Using standard thermodynamic data, a minimum Gibbs free energy of formation of -847.9 kJ/mol for MCM-41 was calculated compared to -848.85 kJ/mol for amorphous silica and -856.3 kJ/mol for quartz. X-ray diffraction (XRD) analyses of recovered solids indicated a progressive loss of crystallinity in MCM-41 and Al-MCM-41 over the 79 day dissolution experiment. BET nitrogen surface area analyses of recovered solids revealed no appreciable change in the surface area of either material after 79 days of reaction in water. Field emission scanning electron microscope (SEM) images taken of the 79 day MCM-41 sample showed some degradation of the initial structure-fine, worm-like particles.     

Single molecule photobehavior of a chromophore interacting with silica-based nanomaterials

Single molecule studies of the free DY-630-MI and interacting with MCM-41 and (Al)MCM-41, show the conformational diversity of the molecule. The free dye is characterized by a single broad (fwhm = 0.7 ns) lifetime distribution histogram centered on 1.47 ns, which is also reflected in the broadness of the polarization value distribution histogram, covering almost the full range of values from -1 to 1. The fluorescence intensity traces of the free DY-630-MI show strong blinking behavior and weak photostability. Upon interaction with the mesoporous silica nanomaterials, MCM-41 and (Al)MCM-41, the dye molecule becomes more stable, with less blinking present in the fluorescence traces. The lifetime distribution histogram in the case of DY-630-MI/MCM-41 complexes is fitted by 3 Gaussians, indicating 3 distinct interaction sites. The Gaussian with the largest amplitude is centered on 2.19 ns, consistent with the confinement effect of MCM-41 and in agreement with the ensemble average studies. The polarization value distribution histogram becomes narrower in comparison with the free molecule and is more biased towards the positive limit. Replacing few Si(4+) ions with Al(3+) ones in the regular MCM-41 changes the local electrostatic field within the nanotube. This atomic substitution in the nanohosts results in a more selective orientation of the dye molecules, giving two populations with time constants 1.56 and 2.10 ns.     

MCM-41分子筛担载纳米TiO2复合材料光催化降解罗丹明B

采用溶胶-凝胶法将TiO2担载在介孔MCM-41分子筛上, 制备了不同TiO2含量的系列TiO2/MCM-41复合材料, 利用X射线衍射、N2吸附、紫外-可见光谱和透射电镜等方法对其进行表征. TiO2的晶型为锐钛矿相, 复合材料的比表面积和孔体积随其中TiO2担载量(复合材料中TiO2与MCM-41的质量比)的增加而减小, TiO2的平均粒径随其担载量的增加而增大. 以罗丹明B的光催化降解为探针反应, 评价了TiO2/MCM-41复合材料的光催化降解活性. 结果表明, 在紫外光照射下, 罗丹明B在该复合材料上的光催化降解反应遵循一级反应动力学, 复合材料对罗丹明B的光催化降解活性明显高于商用TiO2 (P-25), 复合材料的光催化降解活性由复合材料的吸附能力和所含TiO2的光催化活性共同决定.     

杂原子介孔Co-MCM-41分子筛的制备及其吸附脱氮性能

采用水热法合成了介孔MCM-41和Co-MCM-41分子筛,并利用XRD、FT-IR、低温N₂吸附-脱附和NH₃-TPD等方法对合成的分子筛进行了表征。考察了晶化时间、晶化温度、陈化时间对合成介孔Co-MCM-41分子筛的影响,确定较适宜的合成条件为陈化时间1 h,晶化温度110 ℃,晶化时间2 d。XRD 和FT-IR表征结果说明,Co原子已经进入MCM-41的骨架。MCM-41和Co-MCM-41的平均孔径均为2.82 nm,BET比表面积分别为986.42和 637.69 m²/g,孔容分别为0.762 1和0.537 2 m³/g。NH₃-TPD的表征结果表明,MCM-41和Co-MCM-41的酸性都较弱,但Co-MCM-41的酸性明显强于MCM-41。在此基础上,利用合成的MCM-41和Co-MCM-41吸附脱除氮含量为1 737.35 μg/g的模拟燃料中的喹啉。喹啉分子尺寸的模拟结果为0.711 6 nm × 0.500 2 nm,说明其可以很容易地进入MCM-41和Co-MCM-41的介孔孔道中。Co-MCM-41分子筛的氮脱除率明显高于MCM-41,这是由于其较强的酸性及与喹啉之间的化学吸附,而且,Co-MCM-41吸附脱氮具有较好的再生性能。     

An investigation of gold adsorption from a binary mixture with selective mesoporous silica adsorbents

Gold-selective adsorbents were prepared from mesoporous MCM-41 silica by grafting organic amine groups (i.e., RNH2, R2NH, and R3N; R=propyl). NH2-MCM-41, NRH-MCM-41, and NR2-MCM-41 displayed strong affinity for gold and at 1 mmol/g loading adsorbed 0.40, 0.33, and 0.20 mmol/g of gold. Copper and nickel were not adsorbed on these adsorbents. Grafting surface chemical moieties introduces heterogeneity on an otherwise uniform MCM-41 pore surface and metal adsorption is best described by the Freundlich adsorption model. A series of binary adsorption equilibrium studies with NH2-MCM-41 containing 2.2 mmol RNH2/g shows that NH2-MCM-41 adsorbs only gold from solutions containing copper and nickel with an adsorption capacity of 0.6 mol of Au/mol of RNH2 (1.1 mmol of Au/g of NH2-MCM-41). Copper and nickel were not adsorbed by NH2-MCM-41 regardless of the solution concentration, composition, and pH (i.e., 2 to 4) in the presence of gold. The LeVan and Vermeulen adsorption model based on a single component Freundlich isotherm and corrected for the anion effect accurately predicted the binary adsorptions. The adsorbed gold was completely recovered by a simple acid wash and the recovered gold solution is 99% pure. The regenerated NH2-MCM-41 remained 100% selective for gold removal and exhibited the same adsorption capacity even after several uses.     

Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples’ structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N₂ adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f_t=ktⁿ was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties.     

硅甲基接枝改性MCM-48的结构特征及表面性质

本文利用三甲基氯硅烷与未焙烧MCM-48反应,实现对MCM-48的表面硅甲基接枝改性。结果表明:原未焙烧MCM-48孔道内的CTAB模板剂被脱除,三甲基氯硅烷与表面羟基反应,将硅甲基官能团接枝到MCM-48的内外表面。改性后MCM-48具有良好的长程有序结构,较窄的孔径分布,较大的孔体积和较高的比表面积,相对于未焙烧MCM-48,硅甲基接枝改性MCM-48的表面亲水性降低,亲油性得到提高。     

Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

MCM-41介孔分子筛共价键联钴酞菁的制备，表征及性质

采用两种方法将钴酞菁配合物共价联接到介孔分子筛MCM-41的表面：(1) 在MCM-41表面联接含伯胺的有机侧链；(2) 是在MCM-41表面联接含仲胺的有机侧链。含氯磺酸基的钴酞菁与胺反应形成磺酰胺。对得到的主客体化合物用多种物化手段和催化反应进行了表征。结果表明，钴酞菁以单体形式固定在介孔分子筛MCM-41的孔道壁上，在反应条件下固载后的钴酞菁具有高催化活性，同时表现出良好的稳定性，多次重复使用活性没有明显的改变。     

Spectroscopic monitoring for the formation of mesoporous MCM-41 materials upon microwave irradiation

The mesoporous MCM-41 materials were prepared in very short crystallization time (∼40 min) upon microwave irradiation in comparison with conventional hydrothermal heating method. With both microwave irradiation and hydrothermal heating, the MCM-41 formation via supramolecular templating method has been monitored by fluorescence and electron spin resonance (ESR) spectroscopy. Pyrene as a fluorescence probe and 4-(N,N-dimethyl-N-hexadecyl)ammonium-2,2,6,6-tetramethyl piperidinyloxy iodide (CAT16) as a spin probe were respectively dissolved into the micelle solutions to form the MCM-41 precursor gels. These probes allow the monitoring of the supramolecular interaction between the anionic silicate species and the cationic surfactant molecules during the MCM-41 formation. Analyses of fluorescence and ESR spectra indicate that the fast increase of hydrophobicity and microviscosity at the solubilzation sites of the probes results from the accelerated condensation of silicates onto the micelle surface upon microwave irradiation. The fluorescence change from the silicate L-center in the MCM-41 precursor gel also probes the fast silicate condensation upon microwave irradiation. It seems that the fast formation of MCM-41 upon microwave irradiation is ascribed to the microwave-susceptible head groups of surfactant molecules in addition to fast dissolution of the precursor gel.     

Synthesis, spectroscopy and catalysis of

Chromium acetyl acetonate [Cr(acac)3] complexes have been grafted onto the surface of two mesoporous crystalline materials; pure silica MCM-41 (SiMCM-41) and Al-containing silica MCM-41 with an Si:Al ratio of 27 (AlMCM-41). The materials were characterized with X-ray diffraction, N2 adsorption, thermogravimetrical analysis, diffuse reflectance spectroscopy in the UV-Vis-NIR region (DRS), electron spin resonance (ESR) and Fourier transform infrared spectroscopy. Hydrogen bonding between surface hydroxyls and the acetylacetonate (acac) ligands is the only type of interaction between [Cr(acac)3] complexes and SiMCM-41, while the deposition of [Cr(acac)3] onto the surface of AlMCM-41 takes place through either a ligand exchange reaction or a hydrogen-bonding mechanism. In the as-synthesized materials, Cr3+ is present as a surface species in pseudo-octahedral coordination. This species is characterized by high zero-field ESR parameters D and E, indicating a strong distortion from O(h), symmetry. After calcination, Cr3+ is almost completely oxidized to Cr6+, which is anchored onto the surface as dichromate, some chromate and traces of small amorphous Cr2O3 clusters and square pyramidal Cr5+ ions. These materials are active in the gas-phase and slurry-phase polymerization of ethylene at 100 degrees C. The polymerization activity is dependent on the Cr loading, precalcination temperature and the support characteristics: a 1 wt % [Cr(acac)3]-AlMCM-41 catalyst pretreated at high temperatures was found to be the most active material with a polymerization rate of 14000 g polyethylene per gram of Cr per hour. Combined DRS-ESR spectroscopies were used to monitor the reduction process of Cr(6+/5+) and the oxidation and coordination environment of Cr(n+) species during catalytic action. It will be shown that the polymer chains initially produced within the mesopores of the Cr-MCM-41 material form nanofibres of polyethylene with a length of several microns and a diameter of 50 to 100 nanometers. These nanofibres (partially) cover the outer surface of the MCM-41 material. The catalyst particles also gradually break up during ethylene polymerization resulting in the formation of crystalline and amorphous polyethylene with a low bulk density and a melt flow index between 0.56 and 1.38g per 10 min; this indicates the very high molecular weight of the polymer.