PVK∶DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK,DBVP及PVK:DBVP掺杂体系的UV-vis,PL和PLE光谱的研究,分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用,制备了结构为ITO/PEDOT/PVK:DBVP/LiF/Al的电致发光器件,研究了掺杂体系的电致发光性能.结果表明,在掺杂体系的光致发光和电致发光中,PVK的发射被有效地抑制,PVK与DBVP之间发生了非常有效的能量转移,通过调节PVK与DBVP的比例,可以获得蓝色和绿色发光,同时可以改善器件的发光性能,当PVK与DBVP的重量比为1∶2时,器件的绿色发光效率达到1·06cd/A,此时发光亮度为52cd/m2.     

铽配合物TbY(m-MBA)6(phen)2·2H2O的有机电致发光分析

将新型稀土配合物TbY(m-MBA)6(phen)2*2H2O掺杂到导电聚合物PVK中改善了配合物的成膜性和导电性, 作为发光层应用于有机电致发光. 分别制作了器件(1) ITO/PVKTbY(m-MBA)6(phen)2*2H2O/LiF/Al和以Alq为电子传输层的器件(2) ITO/PVKTbY(m-MBA)6(phen)2*2H2O/Alq/LiF/Al. 研究了两种器件的电致发光性能, 得到了最大效率为0.88 cd*A-1的器件. 研究了铽配合物与PVK共掺杂体系的激发光谱和光致发光谱, 发现两者之间存在着能量转移, 说明Y3+的存在促进了PVK到Tb3+的能量传递. 文章就器件的发光特性和掺杂体系的能量传递进行了初步讨论.     

芴-咔唑新型共聚物/PVK掺杂体系的电致发光特性研究

研究了新型的芴-咔唑共聚物(PFC)与聚乙烯咔唑(PVK)掺杂体系的光致发光和电致发光特性.制备了结构分别为indium-tin-oxide(ITO)/PVK:PFC/bathocuproine(BCP)/tris-(8-hydroxylquinoline)-aluminum (Alq₃) /Mg:Ag，ITO/PFC/BCP/Alq₃/Mg∶Ag和ITO/PVK/BCP/Alq₃/Mg∶Ag的三种有机电致发光器件.对器件的光电特性进行了测试.结果表明，掺杂体系中的PVK有效地抑制了固态膜中PFC激基缔合物的形成.掺杂器件在不同的外加电场作用下发生发光层位置的移动，通过调节外加电场，可以获得从绿光到蓝光的可见光发射.当外加电压大于7V时，掺杂器件的蓝色发光亮度达到1650cd/m²，推测其中可能存在从PVK到PFC的能量传递过程.     

铽配合物Tb(o-MBA)3phen与PVK掺杂体系的发光机理

合成了一种新型的稀土铽配合物材料Tb(o-MBA)₃phen,并把它作为发光材料应用于有机电致发光器件中。将铽配合物与PVK的混合溶液用旋涂法制得发光层,并利用Alq₃作为电子传输层制备了多种结构的电致发光器件:器件A:ITO/PVK:Tb(o-MBA)₃phen/LiF/Al;器件B:ITO/PVK:Tb(o-MBA)₃phen/BCP/Alq₃/LiF/Al;器件C:ITO/BCP/PVK:Tb(o-MBA)₃phen/Alq₃/LiF/Al。由器件A和C得到了纯正的、明亮的Tb³⁺的绿光发射,发射光谱中四个特征峰分别对应着能级⁵D₄→⁷F_J(J=6,5,4,3)的跃迁,而PVK的发光完全被抑制。在光致发光中PVK的发射光谱和铽配合物的激发光谱有一定的重叠,两者之间可能存在Frster能量传递。同时PVK与铽配合物掺杂体系的激发光谱与纯PVK的激发光谱非常相像,而与铽配合物的激发光谱差别很大,这也说明掺杂体系中铽的发光有一部分来源于PVK分子的激发,PVK与铽配合物之间存能量传递过程。研究了掺杂体系的电致发光性能,在电致发光中,铽的发光主要来源于稀土配合物直接俘获载流子形成激子并复合发光。通过优化选择得到了发光性能较好的器件,器件的最大亮度在17V时达到180cd/m²。     

红光量子点掺杂PVK体系的发光特性研究

无热处理制备了红光CdSe/ZnS量子点掺杂PVK的ITO/PVK:QDs/Alq3/Al结构电致发光器件.测试器件的发光光谱和电学特性等,研究了掺杂浓度(质量分数)对体系发光特性的影响,将非掺杂与掺杂体系做了比较,提出了优化掺杂体系的一些可行方案.量子点掺杂浓度较低时,主要为Alq3的发光;掺杂浓度为20%时,Alq3的发光得到抑制,红光发射最佳;继续增大掺杂浓度,QDs发光峰发生微弱红移,器件性能变差.与非掺杂体系相比,掺杂浓度合适的PVK:QDs体系大大提高了器件的稳定性.     

掺磷光材料有机电致发光器件的能量传递

将高量子效率的磷光材料fac-tris-2-phenylpyridine iridium(III) (Ir(ppy)3)按不同的比例掺杂到具有载流子传输能力的主体材料poly(N-vinylcarbazole) (PVK)中作为发光层制备磷光电致发光器件。通过对器件发光机制的研究,发现光致发光过程中起主导作用的是Fo¨ster能量转移机制;而在电致发光过程中,器件的发光性能受Dexter能量转移和电荷陷获2种能量传递形式的影响。器件的I-V-L特性表明：Ir(ppy)3的掺杂比例为5%时,器件的光功率效率最大,能量转移最充分。     

一种新型稀土配合物Tb(m-benzoicacid)3的发光特性的研究

研究了一种新型稀土配合物发光材料 ,对苯甲酸铽Tb(m benzoicacid) 3 的发光特性。以这种材料为掺杂剂 ,聚乙烯咔唑 (PVK)为基质材料制备了薄膜器件。通过对光谱的研究 ,发现在掺杂体系中 ,PVK与Tb(m benzoicacid) 3 之间存在有效的能量传递 ,能量传递效率与铽配合物的掺杂浓度有关 ,随着Tb配合物的掺杂浓度的增加 ,Tb的特征发光在掺杂体系中所占比重也相应增加 ,而PVK的发光相对明显减弱 ,当Tb(m benzoicacid) 3 :PVK的质量比高于 2 0 %时 ,整个体系的发光变为以Tb的发光为主 ,而PVK的发光基本猝灭了。以PVK :Tb(m benzoicacid) 3 掺杂体系为发光层 ,八羟基喹啉铝 (Alq)为电子传输层 ,制备了双层电致发光器件 ,器件的结构为ITO/PVK :Tb(m benzoicacid) 3 /Alq/LiF/Al,该器件的电致发光为三价铽离子的特征发光 ,在 2 1V的电压下 ,亮度可达 311nt。     

高效率共轭聚合物主体绿光磷光发光二极管

因电致发光效率高和器件制备工艺简单,聚合物为主体的绿色磷光电致发光成为一个研究热点.共轭聚合物的三线态能级一般低于绿色磷光材料的三线态能级,易对磷光的发光引起猝灭导致低的发光效率,所以较少被用作绿色磷光材料的主体.通过增加聚乙烯基咔唑（PVK）作为空穴传输层,获得了高发光效率的共轭聚合物聚芴（PFO）作主体绿色磷光发射,甚至高于相同条件下以PVK为主体的绿色磷光发射.究其原因,PVK的电子阻挡作用使发光中心靠近PVK与PFO的界面,界面处PVK因为其高的三线态能级增强了绿色磷光的发光.当三-（2-苯基吡啶）-Ir（Ir（ppy）₃）掺杂浓度为2％时得到了最高的亮度效率24.8 cd/A,此时的电流密度为4.65 mA/cm²,功率效率为11 lm/W,最高亮度达到35054 cd/m²,色坐标是（0.39,0.56）. 关键词： 共轭聚合物 磷光 绿光发光     

TBPe作蓝光材料的双层白色有机电致发光器件的性能

选用一种新型高效的蓝光有机小分子荧光染料TBPe,首次制备了以PVK:TBPe为蓝光发光层和Alq₃:rubrene为橙红光发光层的双层白光有机电致发光器件,器件结构为ITO/PVK:TBPe/Alq₃:rubrene/Mg:Ag。通过适当调节各有机层的掺杂比例和厚度,得到了发光性能比较理想的白光器件。器件在7V左右启亮,而且随着外加电压的变化,色坐标基本保持不变,在外加驱动电压为16V时,器件的亮度为738cd/m²,外量子效率为0.2%。我们还尝试选用本身可以发绿白光,而且兼具电子传输特性的母体材料Zn(BTZ)₂替代Alq₃,器件的最大亮度提高到1300cd/m²,色坐标为(0.32,0.36),更加接近白色等能点,器件其他光电性能也得到了显著地提高。     

铱金属配合物磷光材料掺杂聚合物体系的电致发光特性

通过对一种新型贵金属铱的配合物磷光材料(pbi)₂Ir(acac)与咔唑共聚物进行物理掺杂, 制备了结构为indium-tin oxide(ITO)/poly(N-vinylcarbazole)(PVK): (pbi)₂Ir(acac)(x)/2,9-dimethyl-4,7-diphenyl-1,10-phenan throline(BCP)(20nm)/8-Hydroxyquinoline aluminum(Alq₃)(10nm)/Mg:Ag的聚合物电致磷光器件,研究了磷光聚合物掺杂体系在低掺杂浓度时(0.1%和0.5%(质量百分数,全文同))的光致发光(PL)和电致发光(EL)特性. 结果表明, 该掺杂体系的PL光谱和EL光谱中均同时存在主体材料PVK与磷光客体(pbi)₂Ir(acac)的发光光谱, 但主客体的发射强度不同,推测该掺杂体系在电致发光条件下, 同时存在主体材料到客体的不完全的能量传递和载流子直接俘获过程. 磷光掺杂浓度为0.1%的器件在19V电压下实现了白光发射, 色坐标为(0.32, 0.38), 掺杂浓度为0.5%的器件在20.6V电压下的最大发光亮度为11827 cd·m^-2, 而在13.4V电压下的最大流明效率为4.13 cd·A^-1. 关键词： 有机电致发光器件 铱配合物磷光 聚合物掺杂     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.