A Density Functional Study on the Geometries of Compounds Fe(HCN)_n~+ (n = 1～6)

1 INTRODUCTION The solvation of metal ion by different types ofsolvents is of great interest for a wide variety of app-lications[1]. In the experimental and theoretical inve-stigations, most of such studies are focused on ion-ligand systems complexed by…     

Density Functional Study of AunCo (n=1～7)

Cobalt-doped gold clusters Au_nCo (n=1～7) are systematically investigated for the possible stable geometrical configurations and relative stabilities of the lowest-lying isomers using density-functional theory at B3LYP/LanL2DZ level. Several low-lying isomers were deter-mined, and many of them are in electronic configurations with a high spin multiplicity. The results indicate that the ground-state Au_nCo (n=1～7) clusters adopt a planar structure except for n=7. The stability trend of the Au_nCo (n=1～7) clusters shows that the Au₂Co clusters are magic cluster with high stability.     

A Density Functional Theory Study on the Adsorption of CN on Ni(111) Surface

1 INTRODUCTION Cyanide, CN, is an important free-radical mole-cule of one carbon chemistry, organic chemistry, free-radical chemistry and cosmochemistry. And the im-portant industrial processes, such as the Andrussovreaction, depend on the reactivity of CN bond[1]. Thechemistry of cyanide is also important in the surfacechemistry of a number of C- and N-containing sys-tems[1, . During the past decade, the adsorption of 2]CN and CN-containing molecules on transition metalsurfa…     

Density Functional Theory Study of C2Hx（x=4～6） Adsorption on the Fe（110） Surface

The density functional theory(DFT) and self-consistent periodic calculation were used to investigate the C2Hx(x = 4～6) species adsorption on the Fe(110) surface. The adsorption energy and equilibrium geometry of the species C2Hx(x = 4～6) on four possible sites(top,hcp,SB and LB) on the Fe(110) surface were predicted and compared. Mulliken charges and density of states analysis of the most stable site have been discussed. It is found that the species of C2H6 and C2H5 are adsorbed strongly on the Fe(110) surface with calculated adsorption energy of -80.24 and -178.89 kJ·mol-1 at the Fe-LB(long-bridge) ,respectively. However,the C2H4 is adsorbed strongly on the Fe(110) surface with calculated adsorption energies of -114.96 kJ·mol-1 at the top. The results indicate that the charge transferring process can be completed by chemisorption between Fe(110) surface and the species. Moreover,the chemical bands can be formed by chemisorptions between the Fe(110) surface and the species,too.     

Structural,Electronic and Magnetic Properties of Co_nO(n = 2～10) Clusters: A Density Functional Study

The structural, electronic, and magnetic properties of Co_nO(n = 2～10) clusters have been systematically investigated within the framework of the generalized gradient approximation density functional theory. The results indicate that the O atom occupies the surface-capped position on Co_nO(n = 2～10) clusters. The stabilities of the host clusters are improved by adding one O atom. Maximum peaks of the second-order difference energy of the ground-state Co_nO clusters are found at n = 3, 6 and 8, indicating higher stability than their neighboring clusters. Compared with corresponding pure Con clusters, the O-doped cobalt clusters have larger gaps between the HOMO and LUMO energy levels, indicating their higher chemical stabilities. In addition, the doping of O atom exhibits different influence on the magnetism of the clusters. This is also further investigated by the local magnetic moment, deformation charge density and partial local density of states analysis.     

Probing the Structures and Properties of Asymmetric Clusters (CH3ClBN3)n (n = 1–6) with Density Functional Theory

Russian Journal of Physical Chemistry A - The structures, stabilities, IR spectrum and thermodynamic properties of small asymmetric clusters (CH3ClBN3)n (n = 1–6) are probed using density...     

A Density Functional Theory Study on the Adsorption of CN on Ni（Ⅲ） Surface

The interaction of cyanide (CN) with different sites on Ni(111) surface is studied by using density functional theory (DPT). Ni19 cluster is used to simulate the surface. The present calculations show that the end-on bonded (through C atom) configuration is much more preferable than the side-on bonded CN or other configurations on the same adsorption site. For all adsorption modes, adsorption energies at the top, bridge, and three-fold sites on Ni(111) are comparable, with the bridge site of the end-on bonded CN (through C atom) more favorable than other adsorption sites. CN vibrational frequencies are red-shifted at all cases, except that the end-on CN bonded(through C atom) on the top site is blue-shifted. The bonding of CN on the Ni(111) surface is largely ionic.     

Nonorthogonal Tight-binding Study of the Geometries and Electronic Properties of Ge_n(n=2—20)Clusters

ＩｎｔｒｏｄｕｃｔｉｏｎＳｔｕｄｉｅｓｏｎｃｌｕｓｔｅｒｓｏｆｇｒｏｕｐⅣｅｌｅｍｅｎｔｓ（Ｃ,Ｓｉ,Ｇｅ,ＳｎａｎｄＰｂ）ｈａｖｅｒｅｃｅｉｖｅｄｍｕｃｈａｔｅｎｔｉｏｎｉｎｔｈｅｌａｓｔｄｅｃａｄｅｆｏｒｔｈｅｉｒｐｏｔｅｎｔｉａｌａｐｐｌｉｃａ...     

Density Functional Study on the Reaction Mechanism for the Reaction of Ni^＋ with Ethane

The mechanism of the reaction of Ni^ (^2D) with ethane in the gas-phase was studied by using density functional theory.Both the B3LYP and BLYP functionals with standard all-electron basis sets are used to give the detailed information of the potential energy surface (PES) of [Ni,C2,H6]^ . The mechanisms forming the products CH4 and H2 in the reaction of Ni^ with ethane are proposed.The reductive eliminations of CH4 and H2 are typical addition-elimination reactions.Each of the two reactions consists of two elementary steps:C-C or C-H bond activations to form inserted species followed by isomerizations to from product-like intermediate.The rate determining steps for the elimination reactions of forming CH4 and H2 are the isomerization of the inserted species rather than C-C or C-H bond activations .The elimination reaction of forming H2 was found to be thermodynamically favored compared to that of CH4.     

A Density Functional Study of Small （NiTi）x Clusters with x=1-3

Systematic studies on the geometry, electronic structure and vibrational properties of small (NiTi)x clusters with x=1-3, within the framework of the density functional theory, were performed in this work. The electronic structure analyses were used to investigate the bonding between the early-late(EL) transition metals in their alloy. The results of our calculations have been used to predict (NiTi)x clusters structure for the ground state and confirm that s-electron density is transferred from Ti atoms to Ni atoms followed by the back donation of electrons through the d-orbital. The study provides a fragment approach based on the isolobal analogy that NiTi molecular fragments play a significant role in forming clusters.     

A Periodic Density Functional Study on Adsorption Properties of Methoxy on Au（111） Surface

1INTRODUCTION Methoxy(CH3O)has been identified as the first intermediate in the decomposition of methanol on extensive list of clean transition metal surfaces,such as Ni(100)[1],Cu(100)[2,3],Cu(111)[4],Ag(111)[5],Au(110)[6],Pd(111)[7]and Ru(0001)[8].The electronic structure of the metal is a determining factor in OH bond scission.In fact,group IB clean surfaces have shown very low activity towards this reaction,al-though there are reports on low amounts of methoxy formed on clean Cu(…     

Ab Initio and Density Functional Study on the First Hyperpolarizabilities of Squaric Acid Homologues

The first hyperpolarizabilities of four squaric acid homologues: squaric acid, 1,2-dithiosquaric acid,1,2-diselenosquaric acid and 1,2-ditellurosquaric acid have been calculated using ab initio and DFT methods. The effects of equilibrium geometries, basis set and electron correlation on the first hyperpolarizabilties of these molecules were investigated. The frequency dispersion effect and solvent effect, which are essential to get reliable outputs in comparison to the experimental results, have also been explored. On the basis of these investigations, it is worthy to point out that the heavy atom effect takes effect for these squaric acid homologues.     

Heats of formation for Fe(CO)n(n=1–4)

The dissociation energies of Fe(CO)_n (n=2–4) are computed using correlation consistent basis sets and the CCSD(T) approach. The dissociation energies are extrapolated to the CBS limit and are corrected for core–valence (CV), scalar relativistic, spin–orbit, zero-point, and thermal effects. Our iron carbonyl bond strengths agree with experiment within the respective error bars. We use our dissociations energies at 298 K to obtain the heats of formation of Fe(CO)_n (n=1–4).     

Adsorption Study of Methane on Activated Meso-carbon Microbeads by Density Functional Theory

A combined method of density functional theory (DFT) and statistics integral equation (SIE) for the determination of the pore size distribution (PSD) is developed based on the experimental adsorption data of nitrogen on activated mesocarbon microbead (AMCMB) at 77K. The pores of AMCMB are described as slit-shaped with PSD.Based on the PSD, methane adsorption and phase behavior are studied by the DFT method. Both nitrogen and methane molecules are modeled as Lennard-Jones spherical molecules, and the well-known Steele‘s 10-4-3 potential is used to represent the interaction between the fluid molecule and the solid wall. In order to test the combined method and the PSD model, the Intelligent Gravimetric Analyzer (IGA-003) was used to measure the adsorption of methane on the AMCMB. The DFT results are in good agreement with the experimental data. Based on these facts,we predict the adsorption amount of methane, which can reach 32.3ω at 299K and 4 MPa. The results indicate that the AMCMBs are a good candidate for adsorptive storage of methane and natural gas. In addition, the capillary condensation and hysteresis phenomenon of methane are also observed at 74.05K.     

A Topological Study of the Ferromagnetic “No-Pair Bonding” in Maximum-Spin Lithium clusters: n+1Li n (n=2–6)

The nature of the bonding between lithium atoms, in low-spin and maximum-spin clusters, was investigated using the topological electron localization function (ELF) approach. The maximum-spin clusters are especially intriguing since their bonding is sustained without having even a single electron pair! Hence this type of bonding had been called “no-pair ferromagnetic-bonding” [Danovich, Wu, Shaik J Am Chem Soc 121:3165 (1999); Glokhovtsev, Schleyer Isr J Chem 33: 455 (1993); de Visser, Danovich, Wu, Shaik J Phys Chem A 106:4961 (2002)]. The following conclusions were reached in the study: (a) In the ground state of Li _n , covalent bonding between Li atoms is accounted by the presence of the disynaptic valence basins, which exhibit a significant degree of inter-basin delocalization. (b) Except for the ³Li₂ case, the valence basins of all maximum-spin clusters are populated by unpaired electrons. The valence basins are located off Li–Li axis (or Li–Li–Li plane), so that their spatial distribution minimizes the mutual Pauli repulsion and screens the electrostatic repulsion between the Li cores. The inter-basin delocalization is rather high, thereby indicating that the unpaired electrons are virtually delocalized over all the valence basins. (c) The ELF analysis shows that Li atoms in the low-spin clusters are bonded by “two-center two-electron” and “three-center two-electron” bonds. (d) In the maximum-spin species, bonding is sustained by “two-center one-electron” and “three-center one-electron” bonds. The latter picture is complementary to the valence bond picture [Danovich, Wu, Shaik J Am Chem Soc 121 3165 (1999); de Visser, Danovich, Wu, Shaik J Phys Chem A 106: 4961 (2002)], in which the bicentric ferromagnetic-bonding is delocalized over all the short Li–Li contacts, by the mixing of the ionic structures and other nonredundant structures into the repulsive high-spin covalent structure in which all the electrons populate the 2s atomic orbitals, i.e., the configuration. In such a manner bonding can be sustained from “purely ferromagnetic interactions” without electron pairing.Dedicated to Jean-Paul Malrieu, a friend and a poet-scientist     

On the Catalytic Performance of (ZrO)n (n=1–4) Clusters for CO Oxidation: A DFT Study

The unique characteristic of superatoms to show chemical properties like those of individual atoms opens a new avenue towards replacing noble metals as catalysts. Given the similar electronic structures of the ZrO superatom and the Pd atom, the CO oxidation mechanisms catalysed by (ZrO)_n (n=1–4) clusters were investigated in detail to evaluate their catalytic performance. Our results reveal that a single ZrO superatom exhibits superior catalytic ability in CO oxidation than both larger (ZrO)_n (n=2–4) clusters and a Pd atom, indicating the promising potential of ZrO as a “single-superatom catalyst”. Moreover, the mechanism of CO oxidation catalysed by ZrO^+/− suggests that depositing a ZrO superatom onto the electron-rich substrates is a better choice for practical catalysis application. Accordingly, a graphene nanosheet (coronene) was chosen as a representative substrate for ZrO and Pd to assess their catalytic performances in CO oxidation. Acting as an “electron sponge”, this carbon substrate can both donate and accept charges in different reaction steps, enabling the supported ZrO to achieve enhanced catalytic performance in this process with a low energy barrier of 19.63 kcal/mol. This paper presents a new realization on the catalytic performance of Pd-like superatom in CO oxidation, which could increase the interests in exploring noble metal-like superatoms as efficient catalysts for various reactions.