Efficient and Practical Arene Hydrogenation by Heterogeneous Catalysts under Mild Conditions

An efficient and practical arene hydrogenation procedure based on the use of heterogeneous platinum group catalysts has been developed. Rh/C is the most effective catalyst for the hydrogenation of the aromatic ring, which can be conducted in iPrOH under neutral conditions and at ordinary to medium H₂ pressures (<10 atm). A variety of arenes such as alkylbenzenes, benzoic acids, pyridines, furans, are hydrogenated to the corresponding cyclohexyl and heterocyclic compounds in good to excellent yields. The use of Ru/C, less expensive than Rh/C, affords an effective and practical method for the hydrogenation of arenes including phenols. Both catalysts can be reused several times after simple filtration without any significant loss of catalytic activity.     

Hydrogenation of arenes over silica-supported catalysts that combine a grafted rhodium complex and palladium nanoparticles: evidence for substrate activation on Rh(single-site)-Pd(metal) moieties

The complex Rh(cod)(sulfos) (Rh(I); sulfos = (-)O(3)S(C(6)H(4))CH(2)C(CH(2)PPh(2))(3); cod = cycloocta-1,5-diene), either free or supported on silica, does not catalyze the hydrogenation of benzene in either homogeneous or heterogeneous phase. However, when silica contains supported Pd metal nanoparticles (Pd(0)/SiO(2)), a hybrid catalyst (Rh(I)-Pd(0)/SiO(2)) is formed that hydrogenates benzene 4 times faster than does Pd(0)/SiO(2) alone. EXAFS and DRIFT measurements of in situ and ex situ prepared samples, batch catalytic reactions under different conditions, deuterium labeling experiments, and model organometallic studies, taken together, have shown that the rhodium single sites and the palladium nanoparticles cooperate with each other in promoting the hydrogenation of benzene through the formation of a unique entity throughout the catalytic cycle. Besides decreasing the extent of cyclohexa-1,3-diene disproportionation at palladium, the combined action of the two metals activates the arene so as to allow the rhodium sites to enter the catalytic cycle and speed up the overall hydrogenation process by rapidly reducing benzene to cyclohexa-1,3-diene.     

Molecular heterogeneous catalysis: a single-site zeolite-supported rhodium complex for acetylene cyclotrimerization

By anchoring metal complexes to supports, researchers have attempted to combine the high activity and selectivity of molecular homogeneous catalysis with the ease of separation and lack of corrosion of heterogeneous catalysis. However, the intrinsic nonuniformity of supports has limited attempts to make supported catalysts truly uniform. We report the synthesis and performance of such a catalyst, made from [Rh(C(2)H(4))(2)(CH(3)COCHCOCH(3))] and a crystalline support, dealuminated Y zeolite, giving {Rh(C(2)H(4))(2)} groups anchored by bonds to two zeolite oxygen ions, with the structure determined by extended X-ray absorption fine structure (EXAFS) spectroscopy and the uniformity of the supported complex demonstrated by (13)C NMR spectroscopy. When the ethylene ligands are replaced by acetylene, catalytic cyclotrimerization to benzene ensues. Characterizing the working catalyst, we observed evidence of intermediates in the catalytic cycle by NMR spectroscopy. Calculations at the level of density functional theory confirmed the structure of the as-synthesized supported metal complex determined by EXAFS spectroscopy. With this structure as an anchor, we used the computational results to elucidate the catalytic cycle (including transition states), finding results in agreement with the NMR spectra.     

Fabrication of Ultrafine Palladium Phosphide Nanoparticles as Highly Active Catalyst for Chemoselective Hydrogenation of Alkynes

Monodisperse palladium phosphide nanoparticles (Pd–P NPs) with a smallest size ever reported of 3.9 nm were fabricated using cheap and stable triphenylphosphine as phosphorous source. After the deposition and calcination at 300 °C and 400 °C, the resulting Pd–P NPs increased in size to 4.0 nm and 4.8 nm, respectively. Notably, the latter NPs probably crystallized with a single phase of Pd₃P_0.95, which acted as a highly active catalyst in semi‐ and stereoselective hydrogenation of alkynes. X‐ray photoelectron spectroscopy analysis determined a positive shift of binding energy for Pd(3d) in Pd–P NPs compared to that in Pd on carbon. It indicated the electron flow from metal to phosphorus and the larger electron deficiency of Pd in Pd–P NPs, which suppressed palladium hydride formation and subsequently increased the selectivity. Thus, this result may also indicate the applications of Pd–P and other metal–P NPs in various selective hydrogenation reactions.     

The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes

Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".     

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Methods for the hydrogenation of CO₂ into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO₂ into ethanol over non‐noble cobalt catalysts (CoAlO_x), presenting a significant advance for the conversion of CO₂ into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO₂ to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g^?1 h^?1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlO_x catalyst might be due to the formation of acetate from formate by insertion of *CH_x, a key intermediate in the production of ethanol by CO₂ hydrogenation.     

Efficient Coupling of Solar Energy to Catalytic Hydrogenation by Using Well‐Designed Palladium Nanostructures

A Ru³⁺‐mediated synthesis for the unique Pd concave nanostructures, which can directly harvest UV‐to‐visible light for styrene hydrogenation, is described. The catalytic efficiency under 100 mW cm^?2 full‐spectrum irradiation at room temperature turns out to be comparable to that of thermally (70 °C) driven reactions. The yields obtained with other Pd nanocrystals, such as nanocubes and octahedrons, are lower. The nanostructures reported here have sufficient plasmonic cross‐sections for light harvesting in a broad spectral range owing to the reduced shape symmetry, which increases the solution temperature for the reaction by the photothermal effect. They possess a large quantity of atoms at corners and edges where local heat is more efficiently generated, thus providing active sites for the reaction. Taken together, these factors drastically enhance the hydrogenation reaction by light illumination.     

Development of a concise synthesis of (-)-oseltamivir (Tamiflu)

We report a full account of our work towards the development of an eight‐step synthesis of anti‐influenza drug (?)‐oseltamivir (Tamiflu) from commercially available starting materials. The final synthetic route proceeds with an overall yield of 30 %. Key transformations include a novel palladium‐catalyzed asymmetric allylic alkylation reaction (Pd‐AAA) as well as a rhodium‐catalyzed chemo‐, regio‐, and stereoselective aziridination reaction.     

Rapid monitoring of the nature and interconversion of supported catalyst phases and of their influence upon performance: CO oxidation to CO2 by gamma-Al2O3 supported Rh catalysts

Spatially and temporally resolved energy-dispersive EXAFS (EDE) has been utilised in situ to study supported Rh nanoparticles during CO oxidation by O2 under plug-flow conditions. Three distinct phases of Rh supported upon Al2O3 were identified by using EDE at the Rh K-edge during CO oxidation. Their presence and interconversion are related to the efficiency of the catalysts in oxidising CO to CO2. A metallic phase is only found at higher temperatures (>450 K) and CO fractions (CO/O2 > 1); an oxidic phase resembling Rh2O3 dominates the active catalyst under oxygen-rich conditions. Below about 573 K, and in CO-rich environments, high proportions of isolated Rh(I)(CO)2 species are found to co-exist with metallic Rh nanoparticles. Alongside these discrete situations a large proportion of the active phase space comprises small Rh cores surrounded by layers of active oxide. Confinement of Rh to nanoscale domains induces structural lability that influences catalytic behaviour. For CO oxidation over Rh/Al2O3 there are two redox phase equilibria alongside the chemistry of CO and O adsorbed upon extended Rh surfaces.     

A vanadyl complex grafted to periodic mesoporous organosilica: a green catalyst for selective hydroxylation of benzene to phenol

Selective benzene hydroxylation: A periodic mesoporous organosilica embedded with a vanadyl(IV) acetylacetonate complex has been synthesized through a co-condensation method. This system is a catalyst for direct hydroxylation of benzene to phenol, presenting a selectivity of 100?% towards the phenol formation as well as an excellent catalytic recyclability (see scheme).     

A Useful,Reliable and Safer Protocol for Hydrogenation and the Hydrogenolysis of O‐Benzyl Groups: The In Situ Preparation of an Active Pd0/C Catalyst with Well‐Defined Properties

A simple, highly reproducible protocol for the hydrogenation of alkenes and alkynes and for the hydrogenolysis of O‐benzyl ethers has been developed. The method features the in situ preparation of an active Pd⁰/C catalyst from Pd(OAc)₂ and charcoal, in methanol. The mild reaction conditions (25 °C) and low catalyst loading required (0.025 mol %), as well as the absence of contamination of the product by palladium residues (<4 ppb), make this a sustainable, useful process for organic chemists. Alternatively, the protocol can be carried out under microwave activation, to shorten the reaction times, with cyclohexene as the hydrogen source.     

Mechanisms of Methylenecyclobutane Hydrogenation over Supported Metal Catalysts Studied by Parahydrogen-Induced Polarization Technique

In this work the mechanism of methylenecyclobutane hydrogenation over titania-supported Rh, Pt and Pd catalysts was investigated using parahydrogen-induced polarization (PHIP) technique. It was found that methylenecyclobutane hydrogenation leads to formation of a mixture of reaction products including cyclic (1-methylcyclobutene, methylcyclobutane), linear (1-pentene, cis-2-pentene, trans-2-pentene, pentane) and branched (isoprene, 2-methyl-1-butene, 2-methyl-2-butene, isopentane) compounds. Generally, at lower temperatures (150–350 °C) the major reaction product was methylcyclobutane while higher temperature of 450 °C favors the formation of branched products isoprene, 2-methyl-1-butene and 2-methyl-2-butene. PHIP effects were detected for all reaction products except methylenecyclobutane isomers 1-methylcyclobutene and isoprene implying that the corresponding compounds can incorporate two atoms from the same parahydrogen molecule in a pairwise manner in the course of the reaction in particular positions. The mechanisms were proposed for the formation of these products based on PHIP results.     

CO2 Hydrogenation over Oxide‐Supported PtCo Catalysts: The Role of the Oxide Support in Determining the Product Selectivity

By simply changing the oxide support, the selectivity of a metal–oxide catalysts can be tuned. For the CO₂ hydrogenation over PtCo bimetallic catalysts supported on different reducible oxides (CeO₂, ZrO₂, and TiO₂), replacing a TiO₂ support by CeO₂ or ZrO₂ selectively strengthens the binding of C,O‐bound and O‐bound species at the PtCo–oxide interface, leading to a different product selectivity. These results reveal mechanistic insights into how the catalytic performance of metal–oxide catalysts can be fine‐tuned.