Gas phase formation of methyl and ethyl iodides

Gas phase formation of methyl and ethyl iodides occurs when methanol and ethanol vapors are carried by an inert gas over silica-alumina catalyst supports impregnated with potassium, sodium, cesium, or cadmium iodides at 130–180°. The efficiency of conversion of inorganic to organic iodides by different catalysts was studied using¹²⁵I-labelled potassium and cadmium iodides. A mechanism of organic iodide formation in the heterogeneous reaction is postulated.     

Expected and unexpected photochemical reactions of acyl iodides

Photolysis of acyl iodides RCOI (R = Me, Me₂CH, Ph) under UV irradiation in toluene environment for 20–55 h proved to be a simple and efficient method of preparation of symmetrical α-diketones RCOCOR. In contrast, the photolysis under the same conditions of acyl iodides RCOI [R = Me(CH₂)₃, Me₃C] did not lead to the formation of the corresponding diacyls, and the reaction products were unexpected 1,1-bis(4-methylphenyl)pentane and a mixture of isomeric 3- and 4-methyl(tert-butyl)benzenes respectively. The most probable mechanism of their formation is the primary photochemical acylation of toluene in the aromatic ring followed by the photochemical reduction of the arising butyl 4-methylphenyl ketone in the case of the valeroyl iodide or the photochemical Norrish type I cleavage of isomeric 3- and 4-methylphenyl (tert-butyl) ketones in event of the pivaloyl iodide. In the photolysis of acetyl iodide (R = Me) in benzene or toluene alongside the diacetyl formation polyarylation process was observed of acylated and iodinated into the aromatic ring solvents with the formation of polymeric products with semiconductor and paramagnetic properties.     

Comparative study on uni-univalent and uni-bivalent ion-exchange reaction on Doulite A-116

Determination of ion-exchange equilibrium constant (K) for Cl⁻/I⁻ and Cl⁻/C₂O₄²⁻ system was studied at different temperatures from 25 to 45°C and by varying concentration of iodide and oxalate ion solution. For both uni-univalent and uni-bivalent exchange systems, using 0.5 g of ion-exchange resin DUOLITE A-116 (in chloride form), the value of K increases with rise in temperature i.e., from 13.0 at 25°C to 19.05 at 45°C for Cl⁻/I⁻ system and 33.0 at 25°C to 63.0 at 45°C for Cl⁻/C₂O₄²⁻ system indicating the endothermic ion-exchange reaction. The difference in K values at the same temperature for the two was related to the ionic charge of exchangeable ions in the solution.     

Addition of polyfluoroalkyl iodides to allyl glycidyl ether

Addition of polyfluoroalkyl iodides to the double bond of allyl glycidyl ether occurred under mild conditions (20–25 °C, MeCN/H₂O, Na₂S₂O₄, NaHCO₃) with retention of the oxirane ring. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1476–1478, August, 2007.     

A thermal analysis calculation of pharmaceutical wastewater sludge

Thermal pyrolysis of pharmaceutical wastewater sludge, brown coal, and sludge-coal blends were studied by TG dynamic runs carried out at 20 °C min⁻¹ in the temperature range from 25 to 850 °C. Different possible kinetic models of thermal decomposition have been considered. The best models of mechanism function for brown coal, pharmaceutical wastewater sludge, and coal–sludge blends are a first-order reaction, a N-dimensional nucleation, and growth reactions with N = 2 and 4, respectively. The Arrhenius kinetic parameters for brown coal, pharmaceutical wastewater sludge, and coal–sludge blends are proposed.     

Preparation of a novel polymer gel electrolyte based on N-methyl-quinoline iodide and its application in quasi-solid-state dye-sensitized solar cell

Using poly(acrylonitrile-co-styrene) as polymer host, 1,2-propanediol carbonate, dimethyl carbonate and ethylene carbonate as mixture solvent, N-methyl-quinoline iodide and iodine as the source of I⁻/I₃ ⁻, a novel polymer gel electrolyte with ionic conductivity of 5.12 × 10⁻³ S· cm⁻¹ at 25°C was prepared by sol-gel and hydrothermal methods. Based on the polymer gel electrolyte, a quasi-solid-state dye-sensitized solar cell was fabricated. The solar cell possess better long-term stability and light-to-electrical energy conversion efficiency of 4.04% under irradiation of 100 mW· cm⁻². The influences of polymer host, solvent, N-methyl-quinoline iodide and temperature on ionic conductivity of the polymer gel electrolyte and the performance of the dye-sensitized solar cell was discussed.     

Acyl iodides in organic synthesis. Reactions with morpholine,piperidine, and <Emphasis Type="Italic">N</Emphasis>-hydrocarbylpiperidines

Acyl iodides RCOI (R = Me, Ph) reacted with morpholine and piperidine to give the corresponding N-acyl derivatives and morpholine or piperidine hydroiodides. Reactions of acyl iodides with N-methyl- and N-ethylpiperidines involved cleavage of the exocyclic R-N bond with formation of N-acylpiperidine and alkyl iodide and were accompanied (to insignificant extent) by cleavage of the endocyclic N-C bond, leading to N-alkyl-N-(5-iodopentyl)acylamides. In the reaction of acetyl iodide with N-phenylpiperidine, the main process was cleavage of just endocyclic N-C bond to produce N-(5-iodopentyl)-N-phenylacetamide and its dehydroiodination product, N-(pent-4-en-1-yl)-N-phenylacetamide. Analogous reaction with benzoyl iodide afforded N-(5-iodopentyl)-N-phenylbenzamide in a poor yield.     

Conductance of 1,1-electrolytes in acetonitrile solutions from −40° to 35°C

Conductance data for perchlorates of Li⁺, K⁺, Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, iodides of K⁺, Me₄N⁺, i-Am₃BuN⁺, and tetraphenylborates of Na⁺, Bu₄N⁺ and i-Am₃BuN⁺ in acetonitrile solution in the temperature range −40° to 35°C are reported. Λ_° (limiting molar conductance) and K_A (association constant) are evaluated for several temperatures using a conductance equation based on the chemical model of electrolyte solutions including short range forces. Limiting molar ion conductances, λ _ΰ ⁱ , at −35°, −25°, −15°, −5°, 5°, 15° and 25°C are evaluated from temperature dependent limiting transference numbers. Enthalpies and entropies of association, obtained from the temperature dependence of the association constants, are also presented. Dedicated to the memory of Professor Raymond M. Fuoss.     

Reactions of the paramagnetic quaternary Mannich base in an alkaline medium

The catalytic action of aqueous NaOH at 20 °C on 2,2,6,6-tetramethyl-3-(N-methyl-piperidiniomethyl)-4-oxopiperidine 1-oxyl iodide rapidly resulted in the formation (k = 57 L mol⁻¹ s⁻¹) of a paramagnetic ketone with an activated double bond: 2,2,6,6-tetramethyl-3-methylidene-4-oxopiperidine 1-oxyl. The latter underwent slow transformation into a nitroxyl biradical containing an activated double bond and a methylene bridge linking positions 3 and 3′. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 421–423, February, 2008.     

Synthesis and characterization of some Schiff-base-containing polyimides

The diamine, 4-aminophenyloxy-N-4-[(4-amiophenyloxy)benzylidene]aniline, was prepared via the nucleophilic substitution reaction and was polymerized with different dianhydrides either by one-step solution polymerization reaction or two-step procedure. The latter includes ring-opening polyaddition to give poly(amic acid), followed by cyclodehydration to polyimides. The inherent viscosity ranges from 0.61–0.79 dl/g. Some of the polymers were soluble in most of the organic solvents such as DMSO, DMF, DMAc, NMP, and m-cresol even at room temperature. The degradation temperature of the resultant polymers falls in the ranges from 240–500 °C in nitrogen with only 10% weight loss. Specific heat capacity at 200 °C ranges from 1.0929–2.6275 J g⁻¹ k⁻¹. The temperature at which the maximum degradation of the polymer occurs ranges from 600–630 °C. The glass transition temperature (Tg) values of the polyimides ranged from 185 to 272 °C. The activation energy and enthalpy of the polyimides ranged from 47.5–55.0 kJ/mole and 45.7–53.0 kJ/mole and the moisture absorption in the range of 0.23–0.72%.     

Cyclothiomethylation of carboxylic acid hydrazides with aldehydes and H<Subscript>2</Subscript>S

The cyclothiomethylation of carboxylic acid hydrazides RCONHNH₂ (R = C₅H₄N, Ph, 2-MeOC₆H₄, or 4-HOC₆H₄CH₂) with formaldehyde and H₂S at 70 °C affords predominantly the corresponding N-(1,3,5-dithiazinan-5-yl)amides, whereas this reaction at 0–−50 °C gives a mixture of the latter compounds with 3-acyl-1,3,4-thiadiazolidines. N-(1,3,5-Dithiazinan-5-yl)-amides were selectively synthesized by the reaction of carboxylic acid hydrazides with formaldehyde and H₂S in the presence of BuONa in BuOH.     

Syntheses,structures, and properties of two binuclear cadmium(II) iodides containing a bis(tridentate) Schiff base/tetradentate tripodal amine: control of coordination numbers by varying ligand matrices

Two binuclear cadmium(II) iodide compounds of the types [Cd₂(L1)(I)₄] (1) and [(L2)Cd(μ-I)CdI₃] (2) [L1 = N,N′-(bis(pyridine-2-yl)formylidene)triethylenetetramine and L2 = tris(2-aminoethyl)amine] are synthesized and characterized. X-ray structural study shows that each cadmium(II) in 1 has a distorted square pyramidal geometry with a CdN₃I₂ chromophore and that L1 behaves as a binucleating bis(tridentate) ligand bridging the metal centers with iodides remaining as terminals. In 2, one cadmium(II) adopts a distorted tetrahedral geometry with a CdI₄ chromophore surrounded by four iodides, while the other has a distorted trigonal bipyramidal environment with CdN₄I chromophore bound by four N atoms of L2 and one bridging iodide. Weak C–H···π interactions in 1 result in an infinite 1D chain; however, such weak non-covalent interactions are absent in 2. The Schiff base complex, 1, shows high-energy intraligand ¹(π–π*) fluorescence in DMF solution at room temperature, whereas compound 2 containing tripodal amine is fluorescent-inactive.     

Raman Spectra of Tungsten-Bearing Solutions

Raman spectroscopy at 25 °C was performed to analyze speciation in quenched solutions after experiments on sodium tungstates and sodium tungstate bronze dissolution at t=500 °C, p=1000 bar. The experiments were conducted under different oxidation-reduction conditions in sodium chloride solution media. The spectra of the quenched solutions were different from those of the reference solutions of 0.02 mol⋅kg⁻¹ W(VI) (H₂O) in the pH range 2.3–7.2. Thermodynamic models were established and the fields of predominance of different isopolytungstate species at 25–50 °C were determined. The experimental results of tungstate dissolution demonstrates that reduced tungstate solutions may contain a significant amount of tungsten species with valence states lower than W(VI).     

Thermal behavior of a bentonite

The mineralogical composition of the Kütahya calcium bentonite (CaB) from Turkey was obtained as mass% of 60% calcium rich smectite (CaS), 30% opal-CT (OCT), trace amount illite (I), and some non-clay impurities by using chemical analysis (CA), X-ray diffraction (XRD), and thermal analysis (TG-DTA) data. The crystallinity, porosity, and surface area of the samples heated between 25–1300°C for 2 h were examined by using XRD, TG, DTA and N₂-adsorption-desorption data. The position of the 001 reflection which is the most characteristic for CaS does not affect from heating between 25–600°C and then disappeared. The decrease in relative intensity (I/I ₀) from 1.0 to zero and the increase in full width at half-maximum peak height (FWHM) from 0.25 to 1.0° of the 001 reflection show that the crystallinity of the CaS decreased continuously by rising the heating temperature from 25 to 900°C and then collapsed. The most characteristic 101 reflection for opals intensifies greatly between 900 and 1100°C with the opal becoming more crystalline. The total water content of the natural bentonite after dried at 25, 105 and 150°C for 48 h were determined as 8.8, 5.0 and 2.5%, respectively. The mass loss occurs between 25 and 400°C over two steps with the maximum rate at 80 and 150°C, respectively. The exact distinction of the dehydration temperatures for the adsorbed water and interlayer water is seen almost impossible. The temperature interval, maximum rate temperature, and mass loss during dehydroxylation are 400–800°C, 670°C and 4.6–5.0%, respectively. The maximum rate temperatures for decrystallization and recrystallization are 980 and 1030°C, respectively. The changes in specific micropore volume (V _mi), specific mesopore volume (V _me), specific surface area (S) were discussed according to the dehydration and dehydroxylation of the CaS. The V _mi, V _me and S reach to their maxima at around 400°C with the values of 0.045, 0.115 cm³ g⁻¹ and 90 m² g⁻¹, respectively. The radii of mesopores for the bentonite heated at 400°C are distributed between 1–10 nm and intensified approximately at 1.5 nm.     

Kinetics of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) complex by periodate. Evidence for the inhibiting effect of copper(II)

A kinetic study of the oxidation of [Co(H₂L)(H₂O)₂]²⁺ (H₂L = N,N-bis (salicylaldehyde-1,2-diaminoethane) Schiff base) by periodate in aqueous solution was performed over pH (2.3–3.4) range, (0.1–0.5) mol dm⁻³ ionic strength and temperatures 20–35 °C for a range of periodate and complex concentrations. The reaction rate showed a first-order dependence on both reactants and increased with pH over the range studied. The effects of Cu(II) and Fe(II) on the reaction rate were investigated over the (1.0–9.0) × 10⁻⁵ mol dm⁻³ range. The reaction was inhibited as the concentration of Cu(II) increased, and it was independent on Fe(II) concentrations over the ranges studied. An inner-sphere mechanism is proposed for the oxidation pathways of both the protonated and deprotonated Co^II complex species.     

Regularities of self-propagating high-temperature synthesis in the solid 8-hydroxyquinoline—chloramine B system

The regularities of chemical reactions in solid 8-hydroxyquinoline—chloramine B mixtures were studied under conditions of organic self-propagating high-temperature synthesis (SHS), isothermal reaction, and thermal explosion in the 20–220 °C temperature range. Comprehensive physicochemical analysis and microstructural study of the reaction products were carried out. The temperature of SHS initiation (58 °C), the heat of the reaction (129±9 kJ mol⁻¹), the stoichiometric coefficient (1), the maximum temperature (T _max=98–140 °C), and the velocity of SHS wave propagation (u=0.15–0.55 mm s⁻¹) were determined. Depending on the ratio of the reactants (n), a low-temperature non-degeerate stable gasless mode (n≤1,T _max=115 °C,E _a=42 kcal mol⁻¹) and a high-temperature mode (n>1,T _max=140 °C,E _a=0.4 kcal mol⁻¹) are possible for SHS. The SHS affords monohydroxy and monochloro derivatives of 8-hydroxyquinoline, benzenesulfonamide, NaCl, NaOH, and H₂O. The mechanism of the solid-phase reaction at temperatures below 58 °C includes surface, solid-phase, and gas-phase diffusion; that for SHS is capillary spreading of the hydroxyquinoline melt. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2271–2284, December, 1999.     

Synthesis and structure of cobalt complexes [Ph3(n-Pr)P 2+ [CoI4]2? and [Ph3(n-Am)P 2+ [CoI4]2?

Complexes Ph₃(n-Pr)P₂⁺[CoI₄]²⁻ (I) and [Ph₃(n-Am)P]₂⁺ [CoI₄]²⁻ (II) were synthesized by reactions of triphenyl(alkyl)phosphonium iodide with cobalt(II) iodide in acetone. According to the X-ray diffraction data, complexes I and II consist of tetrahedral triphenyl(alkyl)phosphonium cations (for I, P-C is 1.787(4)–1.804(4) ? and CPC is 106.73(18)°–111.4(18)°; for II P-C is 1.786(6)–1.802(6) ? and CPC is 107.6(3)°–111.7(3)°) and [CoI₄]²⁻ anions (Co-I 2.5923(6)–2.6189(6) ?, ICoI 101.86(2)°–113.25(2)° for I; Co-I 2.5899(9)–2.6171(9) 107.01(3)°–110.47(3)° for II).     

Chloride and iodide mediated oxidation of antimony(III) by cerium(IV) in aqueous sulphuric acid medium

The micro amounts of iodide (10⁻⁷) (mol dm⁻³) and chloride (10⁻²) (mol dm⁻³) mediated oxidation of antimony(III) by cerium(IV) in an aqueous sulphuric acid medium have been studied spectrophotometrically at 25 °C and μ = 3.10 mol dm⁻³. The stoichiometry is 1:2 in chloride and iodide mediated reactions. i.e. one mole of antimony(III) requires two moles of cerium(IV). In the case of chloride mediated reaction, the reaction was first order in cerium(IV) and halide concentrations, whereas in the case of iodide mediated reaction the order with respect to [cerium(IV)] was unity and with respect to iodide concentrations was more than unity (ca. 1.4). In both chloride and iodide mediated reactions the order with respect to antimony(III) concentrations was less than unity. Increase in sulphuric acid concentration increased the rate. The order with respect to H⁺ ion concentration was less than unity. Added products, cerium(III) and antimony(V) did not have any significant effect on the reaction rate. The active species of oxidant was understood to be , whereas that of reductant as SbCl₃ in the case of chloride and SbI²⁺ in case of iodide mediated reactions. The possible reaction mechanisms were proposed and the activation parameters were determined and discussed.     

Syntheses, characterization and solid state thermal studies of N-propyl-1,2-diaminoethane (L) and N-isopropyl-1,2-diaminoethane (L′) complexes of nickel(II) nitrite: X-ray single crystal structure of trans-[NiL2(NO2)2]

Linkage isomers trans-bis(N-propyl-1,2-diaminoethane)dinitronickel(II) (brown, 1), trans-bis(N-isopropyl-1,2-diaminoethane)dinitritonickel(II) (blue-violet, 2a) and trans-bis(N-isopropyl-1,2-diaminoethane)dinitronickel(II) (brown, 2b) have been synthesized from solution and X-ray single crystal structure analysis of complex (1) has been performed. Simultaneous TG-DTA analyses reveal that complex (1) exhibits two successive phase transitions before to undergo decomposition (initial temperature of decomposition, Ti = 215 °C). The first one is reversible (82–98 °C; ΔH = 1.75 kJ mol⁻¹ for heating and 93–77 °C; ΔH = −1.65 kJ mol⁻¹ for cooling) and the second one is irreversible endothermic (135–150 °C kJ mol⁻¹; ΔH = 1.80 kJ mol⁻¹) phase transition. No visual color changes are observed in any of the two transitions. The causes related to the first phase transition remain unexplored. However, on the basis of IR spectral studies the second phase transition is supposed to be due to conformational changes of the diamine chelate rings. On the other hand, complexes (2a) and (2b) undergo decomposition without showing any phase transition [Ti = 185 and 195 °C for (2a) and (2b), respectively].     

Role of dimethylformamide in generating the active form of platinum for catalyzing the synthesis of diaryls from aryl iodides

A mechanism is proposed for the reaction of aryl iodides with platinum(II) tetrachloride complexes in dimethylformamide including formation of PtCl₃(CONMe₂)²⁻ in the first step through activation of a dimethylformamide C−H bond by platinum(II) and subsequent oxidative addition of ArI to this species. L. M. Litvinenko Institute of Physical Organic and Coal Chemistry, National Academy of Sciences of Ukraine, 70 Lyuksemburg ul., Donetsk 340114, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 34, No. 4, pp. 244–246, July–August, 1998.