Mechanism of four-electron reduction of dioxygen to water by ferrocene derivatives in the presence of perchloric acid in benzonitrile, catalyzed by cofacial dicobalt porphyrins

The selective two-electron reduction of dioxygen occurs in the case of a monocobalt porphyrin [Co(OEP)], whereas the selective four-electron reduction of dioxygen occurs in the case of a cofacial dicobalt porphyrin [Co(2)(DPX)]. The other cofacial dicobalt porphyrins [Co(2)(DPA), Co(2)(DPB), and Co(2)(DPD)] also catalyze the two-electron reduction of dioxygen, but the four-electron reduction is not as efficient as in the case of Co(2)(DPX). The micro-superoxo species of cofacial dicobalt porphyrins were produced by the reactions of cofacial dicobalt(II) porphyrins with dioxygen in the presence of a bulky base and the subsequent one-electron oxidation of the resulting micro-peroxo species by iodine. The superhyperfine structure due to two equivalent cobalt nuclei was observed at room temperature in the ESR spectra of the micro-superoxo species. The superhyperfine coupling constant of the micro-superoxo species of Co(2)(DPX) is the largest among those of cofacial dicobalt porphyrins. This indicates that the efficient catalysis by Co(2)(DPX) for the four-electron reduction of dioxygen by Fe(C(5)H(4)Me)(2) results from the strong binding of the reduced oxygen with Co(2)(DPX) which has a subtle distance between two cobalt nuclei for the oxygen binding. Mechanisms of the catalytic two-electron and four-electron reduction of dioxygen by ferrocene derivatives will be discussed on the basis of detailed kinetics studies on the overall catalytic reactions as well as on each redox reaction in the catalytic cycle. The turnover-determining step in the Co(OEP)-catalyzed two-electron reduction of dioxygen is an electron transfer from ferrocene derivatives to Co(OEP)(+), whereas the turnover-determining step in the Co(2)(DPX)-catalyzed four-electron reduction of dioxygen changes from the electron transfer to the O-O bond cleavage of the peroxo species of Co(2)(DPX), depending on the electron donor ability of ferrocene derivatives.     

Selective anion binding by a cofacial binuclear zinc complex of a Schiff-base pyrrole macrocycle

The synthesis of the new cofacial binuclear zinc complex [Zn(2)(L)] of a Schiff-base pyrrole macrocycle is reported. It was discovered that the binuclear microenvironment between the two metals of [Zn(2)(L)] is suited for the encapsulation of anions, leading to the formation of [K(THF)(6)][Zn(2)(μ-Cl)(L)]·2THF and [Bu(n)(4)N][Zn(2)(μ-OH)(L)] which were characterized by X-ray crystallography. Unusually obtuse Zn-X-Zn angles (X = Cl: 150.54(9)° and OH: 157.4(3)°) illustrate the weak character of these interactions and the importance of the cleft preorganization to stabilize the host. In the absence of added anion, aggregation of [Zn(2)(L)] was inferred and investigated by successive dilutions and by the addition of coordinating solvents to [Zn(2)(L)] solutions using NMR spectroscopy as well as isothermal microcalorimetry (ITC). On anion addition, evidence for deaggregation of [Zn(2)(L)], combined with the formation of the 1:1 host-guest complex, was observed by NMR spectroscopy and ITC titrations. Furthermore, [Zn(2)(L)] binds to Cl(-) selectively in THF as deduced from the ITC analyses, while other halides induce only deaggregation. These conclusions were reinforced by density functional theory (DFT) calculations, which indicated that the binding energies of OH(-) and Cl(-) were significantly greater than for the other halides.     

Low-valent chemistry of cobalt amide. Synthesis and structural characterization of cobalt(II) amido, aryloxide, and thiolate compounds

The binuclear cobalt(II) amide complex [(CoL2)2-(TMEDA)] (1) [L = N(Si(t)BuMe2)(2-C5H3N-6-Me); TMEDA = Me2NCH2CH2NMe2] has been synthesized by the reaction of anhydrous CoCl2 with 2 equiv of [Li(L)(TMEDA)]. X-ray crystallography revealed that complex 1 consists of two [CoL2] units linked by one TMEDA ligand molecule, which binds in an unusual N,N'-bridging mode. Protolysis of 1 with the bulky phenol Ar(Me)OH (Ar(Me) = 2,6-(t)Bu2-4-MeC6H2) and thiophenol ArSH (Ar = 2,4,6-(t)Bu3C6H2) gives the neutral monomeric cobalt(II) bis(aryloxide) [Co(OAr(Me))2(TMEDA)] (2) and dithiolate [Co(SAr)2(TMEDA)] (3), respectively. Complexes 1-3 have been characterized by mass spectrometry, microanalysis, magnetic moment, and melting-point measurements, in addition to X-ray crystallography.     

An example of O2 binding in a cobalt(II) corrole system and high-valent cobalt-cyano and cobalt-alkynyl complexes

The novel cobalt corrolazine (Cz) complexes (TBP)(8)CzCoCN (1) and (TBP)(8)CzCo(CCSiPh(3)) (2) have been synthesized and examined in light of the recent intense interest regarding the role of corrole ligands in stabilizing high oxidation states. In the case of 2, the molecular structure has been determined by X-ray crystallography, revealing a short Co[bond]C distance of 1.831(4) A and an intermolecular pi-stacking interaction between Cz ring planes, and this structure has been analyzed in regards to the electronic configuration. By a combination of spectroscopic techniques it has been shown that 1 is best described as a cobalt(III)[bond]pi-cation-radical complex, whereas 2 is likely best represented as the resonance hybrid (Cz)Co(IV)(CCSiPh(3)) <--> (Cz+*)Co(III)(CCSiPh(3)). The reduced cobalt(II) complex, [(TBP)(8)CzCo(II)(py)](-), has been generated in situ and shown to bind dioxygen at low temperature to give [(TBP)(8)CzCo(III)(py)(O(2))](-). For the reduced complex [(TBP)(8)CzCo(II)(py)](-), the EPR spectrum in frozen solution is indicative of a low-spin cobalt(II) complex with a d(z)2 ground state. Exposure of [(TBP)(8)CzCo(II)(py)](-) to O(2) leads to the reversible formation of the cobalt(III)-superoxo complex [(TBP)(8)CzCo(III)(py)(O(2))](-), which has been characterized by EPR spectroscopy. VT-EPR measurements show that the dioxygen adduct is stable up to T approximately 240 K. This work is the first observation, to our knowledge, of O(2) binding to a cobalt(II) corrole.     

Designing binuclear transition metal complexes: a new example of the versatility of N,N'-bis(2-aminobenzyl)-4,13-diaza-18-crown-6

N,N'-Bis(2-aminobenzyl)-4,13-diaza-18-crown-6 (L) is a versatile receptor able to adapt to the coordinative preferences of different metal cation guests. With first-row transition metal ions, L tends to form binuclear complexes but, depending on the nature of the particular metal ion, the structure of the binuclear complex may be very different. Herein we report a study of the structure and magnetic properties of the corresponding nickel(II) and cobalt(II) complexes. The X-ray crystal structure of the nickel complex (1), with formula [Ni2(L)(CH3CN)4](ClO4)4.CH3CN, shows that this compound presents a symmetric coordination environment with L adopting an anti arrangement. Each Ni(II) ion is six-coordinate in a distorted octahedral environment, and both metal ions are quite far from each other. On the other hand, the X-ray crystal structure of the cobalt complex (2), with formula [Co(L)(mu-OH)Co(CH3CN)](ClO4)3, reveals a rather different structure. Coordination number asymmetry is found: one of the Co(II) is five-coordinate in a distorted trigonal-bipyramidal coordination environment, while the second Co(II) ion is six-coordinate in a distorted octahedral arrangement. Now L adopts a syn arrangement and a hydroxide group acts as a bridge between both cobalt ions. This hydroxo-bridged Co(II) binuclear complex shows structural features that mimic the active site of methionine aminopeptidases. The magnetic properties of 1 and 2 have been investigated in the temperature range 2.0-300 K. Whereas 1 displays a Curie law except for temperatures below 50 K where zero-field splitting of the S= 1 ground state is observed, antiferromagnetic exchange in the singular asymmetric binuclear Co(II) complex 2 has been observed. This magnetic behaviour has been fitted considering first-order spin-orbit coupling in the assumed axially distorted octahedral site and totally quenched orbital contribution in the five-coordinate site in which zero-field splitting of the S= 3/2 ground state is operative.     

Synthesis, structural, and spectroscopic characterization and reactivities of mononuclear cobalt(III)-peroxo complexes

Metal-dioxygen adducts are key intermediates detected in the catalytic cycles of dioxygen activation by metalloenzymes and biomimetic compounds. In this study, mononuclear cobalt(III)-peroxo complexes bearing tetraazamacrocyclic ligands, [Co(12-TMC)(O(2))](+) and [Co(13-TMC)(O(2))](+), were synthesized by reacting [Co(12-TMC)(CH(3)CN)](2+) and [Co(13-TMC)(CH(3)CN)](2+), respectively, with H(2)O(2) in the presence of triethylamine. The mononuclear cobalt(III)-peroxo intermediates were isolated and characterized by various spectroscopic techniques and X-ray crystallography, and the structural and spectroscopic characterization demonstrated unambiguously that the peroxo ligand is bound in a side-on η(2) fashion. The O-O bond stretching frequency of [Co(12-TMC)(O(2))](+) and [Co(13-TMC)(O(2))](+) was determined to be 902 cm(-1) by resonance Raman spectroscopy. The structural properties of the CoO(2) core in both complexes are nearly identical; the O-O bond distances of [Co(12-TMC)(O(2))](+) and [Co(13-TMC)(O(2))](+) were 1.4389(17) ? and 1.438(6) ?, respectively. The cobalt(III)-peroxo complexes showed reactivities in the oxidation of aldehydes and O(2)-transfer reactions. In the aldehyde oxidation reactions, the nucleophilic reactivity of the cobalt-peroxo complexes was significantly dependent on the ring size of the macrocyclic ligands, with the reactivity of [Co(13-TMC)(O(2))](+) > [Co(12-TMC)(O(2))](+). In the O(2)-transfer reactions, the cobalt(III)-peroxo complexes transferred the bound peroxo group to a manganese(II) complex, affording the corresponding cobalt(II) and manganese(III)-peroxo complexes. The reactivity of the cobalt-peroxo complexes in O(2)-transfer was also significantly dependent on the ring size of tetraazamacrocycles, and the reactivity order in the O(2)-transfer reactions was the same as that observed in the aldehyde oxidation reactions.     

Syntheses of 8-quinolinolatocobalt(III) complexes containing cyclen based auxiliary ligands as models for hypoxia-activated prodrugs

New ligands H(2)L2-H(2)L6 comprise the cyclen macrocycle which is N,N'-dialkylated at the 1,7-nitrogen atoms by three- and four-carbon alkyl chains bearing terminal sulfonic (C(3) H(2)L2), phosphonic (C(3) H(2)L3, C(4) H(2)L4) or carboxylic acid (C(3) H(2)L5, C(4) H(2)L6) groups, and HL7 is N-monoalkylated by a four-carbon sulfonic acid group. The ligands were prepared by alkylation of a bridged bisaminal intermediate. The syntheses of cobalt(III) complexes containing a tetradentate cyclen, N,N'-1,7-Me(2)cyclen, cyclam or L2-L7 ligand together with the bidentate 8-quinolinato (8QO(-)) ligand, of interest as it is a model for a more potent cytotoxic analogue, were investigated. Coordination of ligands (L) cyclen, N,N'-1,7-Me(2)cyclen or cyclam to cobalt(III) was achieved using Na(3)[Co(NO(6))] to form [Co(L)(NO(2))(2)](+). HOTf (trifluoromethansulfonic acid) was used to prepare the triflato complexes [Co(L)(OTf)(2)](+), followed by substitution of the labile triflato ligands to yield [Co(L)(8QO)](ClO(4))(2) isolated as the perchlorate salts. One further example containing cyclam and the 5-hydroxymethyl-8-quinolinato ligand was also prepared by this method. Complexes containing the pendant arm ligands L2-L6 were prepared from the cobalt precursor trans-[Co(py)(4)Cl(2)](+). Reaction of this complex with H(2)L2·4HCl and 8QOH produced [Co(L2)(8QO)] in one step and contains two deprotonated sulfonato pendant arms. The reaction of H(2)L3·4HBr with [Co(py)(4)Cl(2)](+) gave [Co(L3)]Cl in which L3 acts as a hexadenate ligand with the three-carbon phosphonato side chains coordinated to cobalt. H(2)L5·4HCl bearing three-carbon carboxylic acid pendant arms gave a similar result. The four-carbon ligands were coordinated to cobalt by reaction of [Co(py)(4)Cl(2)](+) with H(2)L4·4HBr or H(2)L6·4HCl to give [Co(HL4)Cl(2)] or [Co(H(2)L6)Cl(2)]Cl, which in turn with 8QOH gave the 8QO(-) complexes [Co(L4)(8QO)] bearing anionic phosphate pendant arms or [Co(H(2)L6)(8QO)]Cl(2) containing neutral carboxylic acid side chains. The reaction of Na(3)[Co(CO(3))(3)] with the mono-N-alkylated ligand HL7·4HCl and then HOTf gave [Co(L7)(CO(3))] and then in turn [Co(L7)(OTf)(2)]. The carbonato complex [Co(L7)(CO(3))] with [8QO](2)[SO(4)] produced [Co(L7)(CO(3))]. All complexes containing L7 bear an anionic sulfonato group on the side chain. The synthesis and characterisation of the six new ligands based on N-alkylated cylen ligand and the cobalt complexes outlined above are described, along with cyclic voltammograms of the 8QO(-) complexes and the molecular structures determined by X-ray crystallography of [Co(cyclen)(H(2)O)(2)](OTf)(3) (formed by aquation of the triflato complex), [Co(cyclen)(8QO)](ClO(4))(2), Co(L2)(8QO)·2H(2)O, Co(L4)(8QO)·6H(2)O and [Co(H(2)L6)Cl(2)]Cl·H(2)O. These demonstrate the coordination of the cyclen ligand in the folded anti-O,syn-N configuration with the N-alkylated nitrogens occupying apical positions.     

Anionic carbonato and oxalato cobalt(III) nitrogen mustard complexes

Synthetic approaches to cobalt(III) complexes [Co(L)(L')2] containing the bidentate dialkylating nitrogen mustard N,N-bis(2-chloroethyl)-1,2-ethanediamine (L = dce) together with anionic ancilliary ligands (L') which are either carbonato (CO3(2-)), oxalato (ox2-), bis(2-hydroxyethyl)dithiocarbamato (bhedtc-), 2-pyridine carboxylato (pico-) or 2-pyrazine carboxylato (pyzc-) were investigated. Synthetic routes were developed using the related amines N,N-diethyl-1,2-ethanediamine (dee) and 1,2-ethanediamine (en). The complexes [Co(CO3)2(L)]- (L = dee 1, dce 2), [Co(ox)2(L)]- (L = dee 3, dce 4), [Co(bhedtc)2(dee)]+ 5, [Co(bhedtc)2(en)]+ 6, mer-[Co(pico)3], mer-[Co(pyzc)]3 7 and [Co(pico)2(dee)]+ 8 were prepared and were characterised by IR, UV-Vis, 1H and 13C[1H] NMR spectroscopy, mass spectrometry and cyclic voltammetry. [Co(bhedtc)2(en)]BPh4 6b and trans(O)-[Co(pico)2(dee)]ClO4 8 were characterised by X-ray crystallography. In vitro biological tests were carried out on complexes 1-4 in order to assess the degree to which coordination of the mustard to cobalt attenuated its cytotoxicity, and the differential toxicity in air vs. nitrogen.     

Design and synthesis of binucleating macrocyclic clefts derived from Schiff-base calixpyrroles

The syntheses, characterisation and complexation reactions of a series of binucleating Schiff-base calixpyrrole macrocycles are described. The acid-templated [2+2] condensations between meso-disubstituted diformyldipyrromethanes and o-phenylenediamines generate the Schiff-base pyrrolic macrocycles H(4)L(1) to H(4)L(6) upon basic workup. The single-crystal X-ray structures of both H(4)L(3).2 EtOH and H(4)L(6).H2O confirm that [2+2] cyclisation has occurred, with either EtOH or H2O hydrogen-bonded within the macrocyclic cleft. A series of complexation reactions generate the dipalladium [Pd2(L)] (L=L(1) to L(5)), dinickel [Ni2(L(1))] and dicopper [Cu2(L)] (L=L(1) to L(3)) complexes. All of these complexes have been structurally characterised in the solid state and are found to adopt wedged structures that are enforced by the rigidity of the aryl backbone to give a cleft reminiscent of the structures of Pacman porphyrins. The binuclear nickel complexes [Ni2(mu-OMe)2Cl2(HOMe)2(H(4)L(1))] and [Ni2(mu-OH)2Cl2(HOMe)(H(4)L(5))] have also been prepared, although in these cases the solid-state structures show that the macrocyclic ligand remains protonated at the pyrrolic nitrogen atoms, and the Ni(II) cations are therefore co-ordinated by the imine nitrogen atoms only to give an open conformation for the complex. The dicopper complex [Cu2(L(3))] was crystallised in the presence of pyridine to form the adduct [Cu2(py)(L(3))], in which, in the solid state, the pyridine ligand is bound within the binuclear molecular cleft. Reaction between H(4)L(1) and [Mn(thf){N(SiMe(3))2}2] results in clean formation of the dimanganese complex [Mn2(L(1))], which, upon crystallisation, formed the mixed-valent complex [Mn2(mu-OH)(L(1))] in which the hydroxo ligand bridges the metal centres within the molecular cleft.     

Isolation, dynamic NMR study and X-ray characterisation of a bis sulfonium zirconocene-ate dimer

The novel dimer [Cp(2)Zr[upper bond start]([minus sign in circle])S([plus sign in circle])CH(Ph)CH[double bond]C[upper bond end]PPh(2)](2), the first example of a structurally characterised sulfur-bridged binuclear zirconathiolane complex, was prepared, characterised by NMR spectroscopy and X-ray crystallography, and some aspects of its solution behaviour were studied.     

Catalytic dioxygen activation by (nitro)(meso-tetrakis(2-n-methylpyridyl)porphyrinato)cobalt(III) cation derivatives electrostatically immobilized in nafion films: an experimental and DFT investigation

Complexes of the (nitro)( meso-tetrakis(2- N-methylpyridyl)porphyinato)cobalt(III) cation, [LCoTMpyP(2)(NO 2)] (4+), in which L = water or ethanol have been immobilized through ionic attraction within Nafion films (Naf). These immobilized six-coordinate species, [LCoTMPyP(2)(NO 2)/Naf], have been found to catalyze the oxidation of triphenylphosphine in ethanol solution by dioxygen, therefore retaining the capacity to activate dioxygen catalytically without an additional reducing agent as was previously observed in nonaqueous solution for the non-ionic (nitro)cobalt porphyrin analogs. Heating these immobilized six-coordinate species under vacuum conditions results in the formation of the five-coordinate nitro derivatives, [CoTMPyP(2)(NO 2)/Naf] at 85 degrees C and [CoTMPyP(2)/Naf] at 110 degrees C. The catalytic oxidation of gas-phase cyclohexene with O 2 is supported only by the resulting immobilized five-coordinate nitro complex as was previously seen with the corresponding solution-phase catalyst in dichloromethane solution. The simultaneous catalytic oxidation of triphenylphosphine and cyclohexene with O 2 in the presence of the Nafion-bound six-coordinate ethanol nitro complex is also observed; however, this process is not seen for the CoTPP derivative in dichloromethane solution. The oxidation reactions do not occur with unmodified Nafion film or with Nafion-supported [BrCo(III)TmpyP]/Naf or [Co(II)TmpyP]/Naf, indicating the necessity for the nitro/nitrosyl ligand in the oxidation mechanism. The existence of a second reactive intermediate is indicated because the two simultaneous oxidation reactions depend on two distinct oxygen atom-transfer steps having different reactivity. The absence of homogeneous cyclohexene oxidation by the six-coordinate (H 2O)CoTPP(NO 2) derivatives in the presence of Ph 3P and O 2 in dichloromethane solution indicates that the second reactive intermediate is lost by an unidentified route only in solution, implying that the immobilization of it in Nafion allows it to react with cyclohexene. Although direct observation of this species has not been achieved, a comparitive DFT study of likely intermediates in several catalytic oxidation mechanisms at the BP 6-31G* level supports the possibility that this intermediate is a peroxynitro species on the basis of relative thermodynamic accessibility. The alternate intermediates evaluated include the reduced cobalt(II) porphyrin, the dioxygen adduct cobalt(III)-O 2 (-), the oxidized cobalt(II) pi-cation radical, and the nitrito complex, cobalt(III)-ONO.     

Dioxygen activation by a low-valent cobalt complex employing a flexible tripodal N-heterocyclic carbene ligand

The novel versatile cobalt(I) tris-carbene complex [(TIMEN(xyl))Co]Cl (1) (where TIMEN = (tris[2-(3-arylimidazol-2-ylidene)ethyl]amine) reacts with CO, one-electron oxidizers such as CH(2)Cl(2), and O(2) to yield the cobalt complexes [(TIMEN(xyl))Co(CO)]Cl (2), [(TIMEN(xyl))Co(Cl)]Cl (3), and peroxo species [(TIMEN(xyl))Co(O(2))](BPh(4)) (5). All new complexes were fully characterized by (1)H NMR, UV/vis, and IR spectroscopy as well as superconducting quantum interference device (SQUID) magnetization measurements and single-crystal X-ray crystallography. The nucleophilic character of the eta(2)-bound dioxygen ligand in 5 was confirmed by density functional theory (DFT) studies and allows for oxygen-transfer reactions with electron-deficient organic substrates, such as benzoyl chloride.     

How molecular oxygen binds to bis[trifluoroacetylacetonato(-1)]cobalt(II)--ab initio and density functional theory studies

Cobalt(II) diketonate complexes, such as bis[trifluoroacetylacetonato(-1)]cobalt(II) [Co(tfa)(2)], catalyze the aerobic oxidation of alkenols into functionalized tetrahydrofurans. To gain insight into activation of triplet dioxygen by Co(tfa)(2) in a protic solvent, as used in oxidation catalysis, the electronic structure of aquabis[trifluoroacetylacetonato(-1)]cobalt(II)--Co(tfa)(2)(H(2)O)--and the derived dioxygen adduct were characterized using ab initio (CASSCF, NEVPT2) and density functional theory (BP86, TPSSh, B3LYP) methods. The ground state of Co(tfa)(2)(H(2)O) is a high-spin, quartet state. As dioxygen approaches the cobalt atom, the quartet state couples with a triplet dioxygen molecule and forms a sextet, a quartet, and a doublet spin state with the high-spin state being the lowest in energy. At the equilibrium Co-O(2) distance of 1.9 ?, Co(tfa)(2)(H(2)O)(O(2)) has a doublet superoxo Co(III) ground state with the unpaired electron residing on the oxygen moiety, in a nearly unchanged O(2)π* orbital.     

新型四元双核铕配合物的合成与晶体结构

在水和乙醇混合体系中,以邻苯二甲酸(H2phth)、邻菲咯啉(phen)与Eu(NO3)3.6H2O反应,首次培养出粉红色单晶[Eu(phth)(Hphth)(phen)(H2O)2]2.用X射线单晶衍射法测定了配合物的晶体结构.晶体结构研究表明配合物为双核结构,每个配位中心Eu原子为九配位,呈畸变的单帽四方反棱柱构型.该配合物通过配位水、邻苯二甲酸与邻菲咯啉之间的氢键作用形成三维的超分子网络.     

Nitric oxide reactivity of fluorophore coordinated carboxylate-bridged diiron(II) and dicobalt(II) complexes

The synthesis, structural characterization, and NO reactivity of carboxylate-bridged dimetallic complexes were investigated. The diiron(II) complex [Fe(2)(mu-O(2)CAr(Tol))(4)(Ds-pip)(2)] (1), where O(2)CAr(Tol) = 2,6-di(p-tolyl)benzoate and Ds-pip = dansyl-piperazine, was prepared and determined by X-ray crystallography to have a paddlewheel geometry. This complex reacts with NO within 1 min with a concomitant 4-fold increase in fluorescence emission intensity ascribed to displacement of Ds-pip. Although the diiron complex reacts with NO, as revealed by infrared spectroscopic studies, its sensitivity to dioxygen renders it unsuitable as an atmospheric NO sensor. The air-stable dicobalt(II) analogue was also synthesized and its reactivity investigated. In solution, the dicobalt(II) complex exists as an equilibrium between paddlewheel [Co(2)(mu-O(2)CAr(Tol))(4)(Ds-pip)(2)] (2) and windmill [Co(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)(Ds-pip)(2)] (3) geometric isomers. Conditions for crystallizing pure samples of each of these isomers are described. Reaction of 2 with excess NO proceeds by reductive nitrosylation giving [Co(mu-O(2)CAr(Tol))(2)(NO)(4)] (5), which is accompanied by release of the Ds-pip fluorophore that is N-nitrosated in the process. This reaction affords an overall 9.6-fold increase in fluorescence emission intensity, further demonstrating the potential utility of ligand dissociation as a strategy for designing fluorescence-based sensors to detect nitric oxide in a variety of contexts.     

The first azide(mu1,1)-bridged binuclear cobalt(II)-imino nitroxide complex with ferromagnetic behavior

The first azide(mu1,1)-bridged binuclear cobalt(II) complex with a chelated imino nitroxide radical, [Co2(immepy)2(N3)(4)].2EtOH, was structurally and magnetically characterized, where immepy = 4,4,5,5-tetramethyl-2-(6'-methyl-2'-pyridyl) imidazoline-1-oxyl. Five nitrogen atoms complete the coordination sphere of the Co(II) ion, showing a distorted trigonal bipyramid geometry. Two N(3)(-) anions act as bridges between cobalt ions in the mu1,1 coordination mode, resulting in a binuclear structure with an inversion center. Magnetic studies show that ferromagnetic couplings occurred between the adjacent cobalt(II) ions through N3(-)(mu1,1)) bridges, and antiferromagnetic couplings between the cobalt(II) ions and organic radicals.     

Ligating properties of a potentially tetradentate Schiff base [(CH3)2NCH2CH2N=CHC6H3(OH)(OMe)] with zinc(II), cadmium(II), cobalt(II), cobalt(III) and manganese(III) ions: synthesis and structural studies

A series of Zn(II), Cd(II), Co(II), Co(III) and Mn(III) complexes with the Schiff base [(CH3)2NCH2CH2N=CHC6H3(OH)(OMe)], LH, derived from 2-dimethylaminoethylamine and o-vanillin, has been synthesised and structures of all the products have been established by X-ray crystallography. In the cases of zinc and cadmium, dimeric complexes [Zn(LH)2(NCS)] [Zn2(L)(mu(1,1)-CH3COO)(NCS)3] (1), [Cd2(L)2(Cl)2] (2) and [Cd2(L)2(NCS)2] (3), and for cobalt and manganese, monomeric complexes [Co(LH)2(NCS)]2 [Co(NCS)4] (4), [Co(LH)2(NCS)]ClO4 (5), [Co(L)(N3)(o-vanillinate)] x 0.5 MeOH (6) and [Mn(LH)2(MeOH)2](ClO4)3 (7), are formed with various terminal ligands. All the complexes have been characterised by elemental analysis and IR spectra. UV-Vis and NMR spectroscopy, magnetic, and electrochemical studies, were also carried out where feasible. The Schiff base functions as a bi-, tri- or tetra-dentate chelating agent and coordinates via the protonated or deprotonated phenolic oxygen, amine and imine nitrogens, and only in case of 1 with the methoxy oxygen atoms, to the metal ion leading to the formation of mono- or bi-metallic complexes.     

Dinuclear Co(III)/Co(III) and Co(II)/Co(III) mixed-valent complexes: synthetic control of the cobalt oxidation level

The reactivity of cobalt(II) salts towards H(3)L (2-(2-hydroxyphenyl)-1,3-bis[4-(2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine) was studied in different reaction conditions. Accordingly, the interaction of cobalt(II) acetate with H(3)L in methanol gives rise to the discrete complex [Co(III)(2)L(OAc)(2)(OMe)]*1.5H(2)O.MeOH, 1. Reaction of cobalt(II) acetylacetonate with H(3)L in the presence of dicarboxylic acids was also investigated. Thus, when cobalt(II) acetylacetonate and H(3)L are mixed with terephthalic or malonic acid in 4 : 2 : 1 molar ratios, the mixed valent [Co(II/III)(2)L(acac)(p-O(2)CC(6)H(4)CO(2)H)][Co(II/III)(2)L(acac)(OH)]*2H(2)O*2MeOH, 2 and [Co(II/III)(2)L(acac)(O(2)CCH(2)CO(2)H)][Co(II/III)(2)L(acac)(OH)]*7H(2)O, complexes are isolated. Decreasing the pH of the medium, by addition of a second mol of dicarboxylic acid, leads to [Co(II/III)(2)L(O(2)CCH(2)CO(2))(MeOH)]*2MeOH, 4, while the reaction with terephthalic acid does not proceed. 1, 2 and 4 were crystallographically characterised and all the complexes are dinuclear, with hydrogen bonds that expand the initial nodes. The magnetic characterisation, as well as the NMR spectroscopy, indicates a diamagnetic nature for 1, in agreement with the presence of Co(III), showing the aerial oxidation suffered by the cobalt(II) ions. Nevertheless, are paramagnetic. Temperature variable magnetic measurements were recorded for the crystallographically characterised complexes 2 and 4 and these studies confirm the mixed valence Co(II)/Co(III) nature of the compounds. The best fits of the magnetic data give an axial distortion parameter Delta = 628.7 cm(-1) for 2 and 698.8 cm(-1) for 4, and spin-orbit coupling constant lambda = -117.8 cm(-1) for 2 and -107.0 cm(-1) for 4. Therefore, this study shows that the oxidation degree of the initial cobalt(ii) salt by atmospheric oxygen can be controlled according to the pH of the medium.     

A mixed oxidation state, binuclear iron complex containing an unsymmetrically coordinating ligand. A ligand-induced switch in redox behavior

Binuclear [FeIIFeIII(BMDP)(O2CPh)3](BF4) (1) was obtained by treating an acetonitrile solution of the fully reduced [FeIIFeII(BMDP)(O2CPh)(MeOH)1.5(H2O)0.5](BF4)2 with 5 equiv of benzoate and then exposing the mixture to oxygen. Examination of [FeIIFeIII(BMDP)(O2CPh)3](BF4) by X-ray crystallography reveals the localized, mixed oxidation state nature of the cation in the solid state. 1H NMR and magnetic susceptibility data for the new complex are also reported. In the absence of dioxygen and other oxidants, treatment of FeIIFeII(BMDP)(O2CPh)(MeOH)1.5(H2O)0.5](BF4)2 with excess benzoate results in the formation of [FeIIFeII(BMDP)(O2CPh)2](BF4)2, which has also been characterized by X-ray diffraction.     

Sulfoxide carbon-sulfur bond activation

The alkynylsulfoxide, TMSCCSO(p-tolyl) (TMS = trimethylsilyl, tolyl = C6H4Me), undergoes reaction with (eta5-C5H5)Co(PPh3)2 at room temperature to give the cobaltosulfoxide complex, (C5H5)Co(PPh3)(eta1-CCTMS)[eta1-(S)-SO(p-tolyl)], which was characterized by X-ray crystallography. Exposure of this cobaltosulfoxide complex to oxygen gas leads to the formation of the corresponding metallosulfone complex, (C5H5)Co(PPh3)(eta1-CCTMS)[eta1-(S)-SO2(p-tolyl)], which was characterized by X-ray crystallography. Alternatively, in solution at room temperature, the metallosulfoxide is converted to a 1:4 mixture of the equatorial-equatorial and equatorial-axial bridging cobalt-thiolato dimers, {(C5H5)Co[mu-S(p-tolyl)]}2, respectively. The equatorial-equatorial isomer was characterized by X-ray crystallography.