Unperturbed volume transition of thermosensitive poly-(N-isopropylacrylamide) microgel particles embedded in a hydrogel matrix

The thermoresponsive behavior of poly-(N-isopropylacrylamide) (PNiPAM) microgels embedded in a covalently cross-linked polyacrylamide hydrogel matrix was investigated using ultraviolet-visible (UV-vis) spectroscopy, small-angle neutron scattering (SANS), and confocal laser scanning microscopy. The hydrogel synthesis was performed at two different temperatures, below and above the volume phase transition temperature of PNiPAM, resulting in highly swollen or fully collapsed PNiPAM microgel particles during the incorporation step. UV-vis spectroscopy experiments verify that the incorporation of thermosensitive microgels leads to temperature-sensitive optical properties of the composite materials. SANS measurements at different temperatures show that the thermosensitive swelling behavior of the PNiPAM microgels is fully retained in the composite material. Volume and structure criteria of the embedded microgel particles are compared to those of the free microgels in acrylamide solution. To visualize the temperature responsive behavior of larger PNiPAM particles, confocal fluorescence microscopy images of PNiPAM beads, of 40-microm size, were taken at two different temperatures. The micrographs also demonstrate the retained temperature sensitivity of the embedded microgels.     

Swelling Kinetics of Microgels Embedded in a Polyacrylamide Hydrogel Matrix

Composite hydrogels—macroscopic hydrogels with embedded microgel particles—are expected to respond to external stimuli quickly because microgels swell much faster than bulky gels. In this work, the kinetics of the pH‐induced swelling of a composite hydrogel are studied using turbidity measurements. The embedded microgel is a pH‐ and thermosensitive poly(N‐isopropylacrylamide‐co‐acrylic acid) microgel and the hydrogel matrix is polyacrylamide. A rapid pH‐induced swelling of the embedded microgel particles is observed, confirming that composite hydrogels respond faster than ordinary hydrogels. However, compared with the free microgels, the swelling of the embedded microgel is much slower. Diffusion of OH^? into the composite hydrogel film is identified as the main reason for the slow swelling of the embedded microgel particles, as the time of the pH‐induced swelling of this film is comparable to that of OH^? diffusion into the film. The composition of the hydrogel matrix does not significantly change the characteristic swelling time of the composite hydrogel film. However, the swelling pattern of the film changes with composition of the hydrogel matrix.     

微凝胶增强两性复合水凝胶的制备与性能

将核壳微凝胶包埋在两性基质中,制备了复合水凝胶(CAH)。 研究发现,利用微凝胶与聚合物链之间的物理缠结作用,可以使复合凝胶具有致密的网络结构,力学性能显著提高;复合凝胶对pH和离子强度敏感,呈现出典型的两性聚电解质凝胶的溶胀行为。 同时微凝胶的存在和特殊的复合结构,可赋予CAH两性凝胶基质所不具有的响应性,并实现在高温下快速响应。     

Interaction of nonionic surfactants with copolymer microgel particles of NIPAM and acrylic acid

Binding of the nonionic surfactants Triton X-100 and Triton X-405 onto linear copolymers of N-isopropylacrylamide (NIPAM) and acrylic acid and to cross-linked microgel particles of similar composition but differing in their cross-link densities has been studied. The binding capacities vary for each of these polymeric systems, being smallest for the linear copolymer. The binding is also significantly less in all cases for the more hydrophilic surfactant, namely, Triton X-405. By comparing estimates of the pore or "cage" size within the microgel particles with the dimensions of the free micelles in solution, it is concluded that micelles of Triton X-100 form within the microgel particles more readily for the lower cross-linked microgel particles. However, micelles do not form as easily inside either microgel for Triton X-405. The swelling/deswelling behavior of each of the two microgels, in the presence of the surfactants, has been explained in terms of their relative binding behavior and how this contributes to the osmotic pressure difference inside and outside the microgel particles and also in terms of micelle "bridging" of the polymer network, causing shrinkage.     

丝素蛋白-聚氨酯复合水凝胶的制备及性能研究

以聚乙二醇(PEG)、聚氧化丙烯二醇(PPG)、异弗尔酮二异氰酸酯(IPDI)为主要原料制备聚氨酯预聚体(PU),与丝素蛋白水溶液(SF)交联制得丝素蛋白-聚氨酯(SF-PU)复合水凝胶.分别利用ATR、SEM对水凝胶组成、结构及微观形貌进行表征;DSC、吸水溶胀测试探讨了丝素蛋白与聚氨酯的质量比(SF/PU)以及聚氨酯中不同软段质量比(PEG/PPG)对SF-PU水凝胶热性能、溶胀性能的影响.结果表明,SF-PU水凝胶具有多孔结构;样品中不同的SF/PU、PEG/PPG均对材料的玻璃化转变温度、结晶度及溶胀性能产生影响,且当水凝胶组分为SF/PU=1/25、PEG/PPG=2/1时,平衡溶胀比(ESR)可达到440%;水凝胶在溶胀初始阶段符合菲克扩散模型,整个溶胀过程遵循溶胀动力学2级方程.     

Controlled synthesis of cell-laden microgels by radical-free gelation in droplet microfluidics

Micrometer-sized hydrogel particles that contain living cells can be fabricated with exquisite control through the use of droplet-based microfluidics and bioinert polymers such as polyethyleneglycol (PEG) and hyperbranched polyglycerol (hPG). However, in existing techniques, the microgel gelation is often achieved through harmful reactions with free radicals. This is detrimental for the viability of the encapsulated cells. To overcome this limitation, we present a technique that combines droplet microfluidic templating with bio-orthogonal thiol-ene click reactions to fabricate monodisperse, cell-laden microgel particles. The gelation of these microgels is achieved via the nucleophilic Michael addition of dithiolated PEG macro-cross-linkers to acrylated hPG building blocks and does not require any initiator. We systematically vary the microgel properties through the use of PEG linkers with different molecular weights along with different concentrations of macromonomers to investigate the influence of these parameters on the viability and proliferation of encapsulated yeast cells. We also demonstrate the encapsulation of mammalian cells including fibroblasts and lymphoblasts.     

Deformation controlled assembly of binary microgel thin films

We describe the assembly of two-component, hydrogel microparticle (microgel) monolayer films onto solid substrates via passive Coulombic adsorption from solution. By using two different microgel types with nearly identical sizes but different degrees of softness, the influence of particle deformation on film composition was determined. Determination of the microgel properties using a variety of light scattering techniques allowed for predictions of the film composition as a function of solution composition using a random sequential adsorption (RSA) model. The films were then studied via atomic force microscopy (AFM), and surface coverage and population statistics were determined from the images and compared to the model predictions. Deviations from the predicted particle adsorption behavior can be directly traced to differences in particle softness, deformation, and particle footprint following adsorption, which biases the particle coverage to the more rigid (smaller footprint) particles. Furthermore, by using a mixture of degradable and nondegradable core/shell particles, the identity of the particles can be unambiguously determined by measuring AFM height changes following erosion of the core from the microgels. These results show that, regardless of the solution diffusion properties of soft particles, their competition for surface adsorption from a binary mixture is largely dictated by their interactions with the surface and their deformation at the surface.     

微凝胶胶体晶体研究进展

Poly(N-isopropylacrylamide)(PNIPAM)微凝胶粒子是一种软的胶体粒子.和单分散的SiO_2、PS、PMMA等硬的胶体粒子一样,单分散的PNIPAM微凝胶粒子也可以自组装成为高度有序的胶体晶体.微凝胶粒子软物质的特性及其对外部刺激的响应性赋予其不同于硬球的组装行为.微凝胶胶体晶体的高度有序结构及其刺激响应性使其在诸多领域有重要用途.本文分别介绍了三维及二维微凝胶胶体晶体组装的研究进展,并对已开发的基于微凝胶胶体晶体的应用进行了总结.     

Responsive hydrogel colloids: Structure,interactions, phase behavior,and equilibrium and nonequilibrium transitions of microgel dispersions

Soft and responsive colloids based on polymer hydrogels have moved into the focus of the colloid community. This review gives a brief overview of the recent literature on the structure and phase behavior of neutral and ionic poly(N-isopropylacrylamide) microgel dispersions from dilute to over-packed conditions, focusing in particular on the ability of these particles to adapt their size and shape in response to external stimuli. The review is hierarchical; it first covers the aspects of an individual microgel particle viz., the internal structure of inhomogeneous and homogeneously cross-linked particles, followed by studies of ensembles of particles covering in particular structural ordering, phase behavior, and liquid–solid and solid–solid transitions. Insights on the ability of the microgel particles to deform, compress, and interpenetrate beyond the close-packed volume fractions are discussed. Building complex architectures using microgel particles for fundamental studies as well as future applications is reviewed towards the end of the article.     

Microgel Capsules Tailored by Droplet‐Based Microfluidics

Microgel capsules are micrometer‐sized particles that consist of a cross‐linked, solvent‐swollen polymer network complexed with additives. These particles have various applications, such as drug delivery, catalysis, and analytics. To optimize the performance of microgel capsules, it is crucial to control their size, shape, and content of encapsulated additives with high precision. There are two classes of microgel‐capsule structures. One class comprises bulk microcapsules that consist of a polymer network spanning the entire particle and entrapping the additive within its meshes. The other class comprises core–shell structures; in this case, the microgel polymer network just forms the shell of the particles, whereas their interior is hollow and hosts the encapsulated payload. Both types of structures can be produced with exquisite control by droplet‐based microfluidic templating followed by subsequent droplet gelation. This article highlights some early and recent achievements in the use of this technique to tailor soft microgel capsules; it also discusses applications of these particles. A special focus is on the encapsulation of living cells, which are very sensitive and complex but also very useful additives for immobilization within microgel particles.     

Direct functionalization of cell-adhesion promoters to hydrogel microparticles synthesized by stop-flow lithography

Polyethylene glycol (PEG) hydrogel microparticles generated via stop-flow lithography can be utilized for efficient microparticle-based cell culture processes because of their high biocompatibility, the molecular diffusion capability in the gel structure, and the tunability of their shape and size. However, the typical functionalization process of PEG microparticles with cell-adhesion promoters has inevitable limitations, requiring additional linker molecules and the preconjugation of linkers to cell-adhesion promoters and microparticles. In this study, a simple and direct cell-adhesion promoter functionalization process of the PEG microparticles is presented by use of aza-Michael reaction between remnant unreacted acrylate groups in particles and amine groups in cell-adhesion promoters. On the basis of proposed process, particles are directly conjugated with poly-l -lysine (PLL), a typical cell-adhesion promoter that can electrostatically interact with cellular membranes, in a controllable manner. We demonstrate enhanced cell-adhesion capabilities of the particles along with the increased amount of conjugated PLL in the particles. Furthermore, to validate extended applicability, the particles are directly conjugated with Gly-Arg-Gly-Asp-Ser (GRGDS) peptides, in which RGD sequence is involved in the cell-adhesion behavior of extracellular matrix proteins, including fibronectin. The introduced GRGDS peptides increase the cell-adhesion capacity of the microparticles binding to integrin proteins in cellular membranes.     

Ion concentration of external solution as a characteristic of micro- and nanogel ionic reservoirs

Ion-sensitive hydrogel is regarded as an ionic reservoir, i.e., a system capable of changing the external pH or ionic strength by accumulating or releasing ions. The concept of a hydrogel ionic reservoir was demonstrated for hydrogel particles of three different size ranges: macrogel (1000-6000 microm), microgel (approximately 20-200 microm), and nanogel (approximately 0.2 microm). Ion sensitivity of poly(N-isopropylacrylamide-co-1-vinylimidazole) (PNIPA-VI) microgels with imidazolyl (ionizable) groups was confirmed by the pH dependence of their volume, while nanogels were characterized by dynamic light scattering. On the contrary, the volume of poly(N-isopropylacrylamide) (PNIPA) microgels without ionizable groups was pH independent in the whole range of pH from 10 to 2. Four distinct regions of pH-behavior were observed for PNIPA-VI hydrogel micro- and nanoparticles using potentiometric titration of their suspensions. Time-resolved measurements of ion concentrations in the suspension of hydrogel particles revealed a substantial difference in kinetics of pH equilibration for (i) ion-sensitive hydrogels (PNIPA-VI) vs hydrogels without ionizable groups (PNIPA) and (ii) PNIPA-VI hydrogels of different sizes. On the basis of the experimental observations, a two-step mechanism affecting the kinetics of proton uptake into the hydrogel particles with ionizable groups was proposed: (1) fast binding of ions to the immediate surface of each particle and (2) a slower successive diffusion of bound sites into the next inner layer of polymer network. In accord with the mechanism proposed, a quasi-chemical kinetic model of pH relaxation to equilibrium was developed to fit the experimental data for the time course of proton uptake by macro-, micro-, and nanogels into two exponentials with the characteristic times of tau(1) and tau(2). We believe the same kinetic model will be pertinent to describe phenomenological and molecular mechanisms controlling proton transport in/out bacteria, cells, organelles, drug delivery vehicles, and other natural or artificial multifunctional ionic containers. The approach can be easily extended for the other ions (e.g., Na(+), K(+), and Ca(2+)).     

Simultaneous release of hydrophobic and cationic solutes from thin-film "plum-pudding" gels: a multifunctional platform for surface drug delivery?

The release of two compositionally different solutes from a composite gel composed of two different populations of microgel particles embedded in a single bulk gel matrix is described, showing the potential of the "plum-pudding gel" as a multifunctional platform for controlled surface release. One hydrophobic solute (pyrene) and one hydrophobic and charged solute (rhodamine 123) were chosen as the solutes to be released. Hydrophobic microgels composed of 50% N-isopropylacrylamide (NIPAM) and 50% N-tert-butylacrylamide (BAM) were loaded with pyrene, and anionic microgels composed of 30% acrylic acid (AAc), 20% NIPAM, and 50% BAM were loaded with rhodamine 123. The two solute-loaded microgel populations were incorporated into a single bulk gel network, from which the two solutes were released simultaneously and independently. Using this structural motif, solutes that are mutually incompatible can be incorporated into a single matrix with which they may also be incompatible. The electrostatically incorporated solute was released much more slowly than the hydrophobically attracted solute, indicating that the microgel composition can be tailored to the specific solute, and thus control its release rate. The choice of bulk matrix was also found to influence the release rate much more than expected, offering a further control element to the system.     

聚乙二醇相对分子质量及用量对温敏型PCL-PEG-PCL水凝胶的制备及释药性研究

采用开环聚合法制备PCL-PEG-PCL共聚物,并将其制成温敏性水凝胶,探究了PEG(聚乙二醇)相对分子质量及质量浓度对水凝胶温敏性的影响.水凝胶的相变温度由翻转小瓶法测定.通过FTIR、热分析仪和SEM等技术对其组成及结构进行表征.以疏水性姜黄素(Cur)为模型药物,制备出载Cur PCL-PEG-PCL水凝胶,并研究其体外释药行为.FTIR结果表明:实验制备的共聚物中含有PCL和PEG的链段.热分析结果表明:在25℃~65℃内水凝胶存在相变过程.SEM结果表明:水凝胶剖面具有疏松多孔.体外释药结果表明:PCL-PEG-PCL水凝胶对Cur具有缓释作用,释药机理符合Higuchi骨架溶蚀模型.     

Fabrication of Thermo‐Responsive Hybrid Hydrogels by In‐Situ Mineralization and Self‐Assembly of Microgel Particles

Summary: An in‐situ mineralization process in the presence of thermo‐responsive microgels leads to the formation of well‐defined hybrid materials. Experimental data suggest that control of the mineralization process in the presence of the microgels offers the possibility to obtain sub‐micrometer‐sized hybrid particles or macroscopic hybrid hydrogels. The rapid formation of CaCO₃ crystals in the microgel structure favors the preparation of the hybrid particles wherein inorganic crystals cover the shell layer of the microgel. The slow formation of CaCO₃ crystals leads to the simultaneous self‐assembly of the microgel particles on the bottom of the reaction vessel, and the formation of a physical network. It has been demonstrated that hybrid hydrogel materials with different calcium carbonate contents and temperature‐dependent swelling‐deswelling properties can be prepared.

Formation of a hybrid hydrogel by the vapor diffusion method.     

Composite hydrogels with temperature sensitive heterogeneities: influence of gel matrix on the volume phase transition of embedded poly-(N-isopropylacrylamide) microgels

The thermo-responsive behaviour of poly-(N-isopropylacrylamide) (PNiPAM) microgels embedded in covalently cross-linked non-temperature-sensitive polyacrylamide (PAam) hydrogel matrixes with different compositions was investigated by using small angle neutron scattering (SANS). The composition of the composite hydrogel was varied by (a) increasing the cross-linker and acrylamide concentration leading to strong hydrogel matrixes and (b) by increasing the microgel concentration to obtain composite gels with an internal structure. Additionally we synthesized composite hydrogels by using γ-irradiation as initiation for the polymerisation. This leads to the formation of chemical bonds between the PNiPAM microgels and the surrounding polyacrylamide matrix. Thus it is possible to synthesize hydrogels without an additional cross-linker, as well as pure particle networks. Some samples were prepared at two different temperatures, below and above the volume phase transition temperature of PNiPAM, resulting in highly swollen or totally collapsed microgels during the incorporation step. The volume phase transition of microgels is not influenced by a hydrogel matrix with high acrylamide concentration independent of the preparation temperature. However, an increased cross-linker concentration leads to a corset like constraint on microgel swelling. Microgels, which are embedded in the collapsed state (at 50 °C), are not able to swell upon cooling, whereas microgels embedded in the swollen state can collapse upon heating. For samples with an increased microgel concentration, the close microgel packing was disturbed by the formation of the polyacrylamide matrix. The hydrogel matrix squeezes the microgels together and leads to partial aggregation. The experiments demonstrate how composite hydrogels with stimuli-sensitive heterogeneities can be prepared such that the full responsiveness of the embedded microgels is retained while the macroscopic dimensions of the gel are not affected by the volume phase transition of the microgels.     

Fractal structures of the hydrogels formed in situ from poly(N-isopropylacrylamide) microgel dispersions

Dispersions of poly(N-isopropylacrylamide) (PNIPAM) microgel thermally gel in the presence of inorganic salts. The in situ-formed hydrogels, with a network of soft particles, represent a new type of colloidal gels. Here, their fractal structures were determined by rheological measurements, using the models of both Shih et al. and Wu and Morbidelli. According to the definition of Shih et al., the colloidal PNIPAM gels fall into the strong-link regime. Yet the calculated fractal dimension of the floc backbone, x, yielded unrealistic negative values, suggesting this model is inapplicable for the present system. The Wu-Morbidelli model gives physically sounder results. According to this model, the strengths of the inter- and intrafloc links are comparable, and the in situ-formed gels are in the transition regime. The fractal dimension, d(f), of the hydrogel decreases from ～2.5 to ～1.8 when the heating temperature increases from 34 to 40 °C. The d(f) values suggest different aggregation mechanisms at different temperatures, that is, a reaction-limited one accompanied by rearrangement at low temperature, a typical reaction-limited one at the intermediate temperature, and a diffusion-limited one at high temperature. With increasing salt concentration, the d(f) of the hydrogel decreases from ～2.1 to ～1.7, suggesting the aggregation mechanism changes from reaction-limited to diffusion-limited. The effects of both temperature and salt concentration can be explained by the changes in the interactions among the microgel particles. The thermogellable PNIPAM microgel dispersions may serve as a model system for the study of heat-induced gelation of globular proteins.     

Macroporous Poly(N-isopropylacrylamide) hydrogels with adjustable size "cut-off" for the efficient and reversible immobilization of biomacromolecules

Poly(N-isopropylacrylamide) (PNIPA) hydrogels with varied degree of crosslinking (DC) were synthesized by using poly(ethylene glycol) (PEG) as an additive. A phase separated ("macroporous") morphology was formed when using PEG contents of > or = 20 wt.-%. Temperature-dependent degrees of swelling had been measured, and average mesh sizes of the swollen polymer network had been calculated. The loading of the hydrogels with labelled dextrans with various molar masses and bovine serum albumin (BSA)-via swelling of the shrunken gel in a cold solution-and their subsequent unloading-via immersion in hot water-were studied in detail. The loading efficiencies were close to zero for PNIPA prepared at PEG contents of < or = 10 wt.-%, and they increased sharply to about 100% for PNIPA prepared with PEG contents of > or = 20 wt.-%. A complete unloading was achieved as well. For macroporous PNIPA prepared at 40 wt.-% PEG content, the loading efficiency was a function of the DC, and the "cut-off" observed as a function of dextran or protein size correlated with the mesh size of the hydrogel. The function of these "smart" hydrogels can be explained by the temperature-induced "pumping" of the solution into the gel bulk via the permanent pores, along with an uptake into the adjacent hydrogel network. Those materials could be used as matrices for the efficient and reversible immobilization of (bio)macromolecules.     

Simulational study of anomalous tracer diffusion in hydrogels

In this article, we analyze different factors that affect the diffusion behavior of small tracer particles (as they are used, e.g., in fluorescence correlation spectroscopy (FCS)) in the polymer network of a hydrogel and perform simulations of various simplified models. We observe, that under certain circumstances the attraction of a tracer particle to the polymer network strands might cause subdiffusive behavior on intermediate time scales. In theory, this behavior could be employed to examine the network structure and swelling behavior of weakly crosslinked hydrogels with the help of FCS.     

On the structure of poly(N-isopropylacrylamide) microgel particles

This investigation presents a study of the internal structure of poly(NIPAM/xBA) microgel particles (NIPAM and BA are N-isopropylacrylamide and N,N'-methylene bisacrylamide, respectively). In this study, x is the wt % of BA used during microgel synthesis. Two values of x were used to prepare the microgels, 1 and 10. The microgel dispersions were investigated using photon correlation spectroscopy (PCS) and small-angle neutron scattering (SANS). These measurements were made as a function of temperature in the range 30-50 degrees C. Scattering maxima were observed for the microgels when the dispersion temperatures were less than their volume phase transition temperatures. The SANS data were fitted using a model which consisted of Porod and Ornstein-Zernike form factors. The analysis showed that the macroscopic hydrodynamic diameter of the microgel particles and the submicroscopic mesh size of the network are linearly related. This is the first study to demonstrate affine swelling for poly(NIPAM/xBA) microgels. Furthermore, the mesh size does not appear to be strongly affected by x. The data suggest that the swollen particles have a mostly homogeneous structure, although evidence for a thin, low segment density shell is presented. The study confirms that poly(NIPAM/xBA) microgel particles have a core-shell structure. The shell has an average thickness of approximately 20 nm for poly(NIPAM/1BA) particles which appears to be independent of temperature over the range studied. The analysis suggests that the particles contained approximately 50 vol % water at 50 degrees C. The molar mass of the poly(NIPAM/1BA) microgel particles was estimated as 6 x 10(9) g mol(-1).