Complexation of Calix[4]arene With Alkali Metal Cations: Conformational Binding Selectivity and Cation-π Driven Inclusion

Hartree-Fock, second order Møller-Plesset perturbation theory, and density functional theory calculations were carried out to analyse the complexation of calix[4]arene with cationic species including H + and the alkali metal cations (Li + , Na + , K + , Rb + , and Cs + ). Special emphasis has been placed on conformational binding selectivity, and on the structural characterization of the complexes. Li + and Na + cations are located in the calix[4]arene lower rim. The larger cations (K + , Rb + , and Cs + ) complex preferentially with the calix[4]arene cone conformer, and their endo (inclusive) complexation is driven by cation- ~ interactions, leading in the case of K + to a structure that reflects a preferential interaction with two phenol rings. The endo complexation of Cs + with calix[4]arene is in agreement with X-ray diffraction data.     

Synthesis,structures, and conformational characteristics of calixarene monoanions and dianions

The synthesis, complete characterization, and solid state structural and solution conformation determination of calix[n]arenes (n = 4, 6, 8) is reported. A complete series of X-ray structures of the alkali metal salts of calix[4]arene (HC4) illustrate the great influence of the alkali metal ion on the solid state structure of calixanions (e.g., the Li salt of monoanionic HC4 is a monomer; the Na salt of monoanionic HC4 forms a dimer; and the K, Rb, and Cs salts exist in polymeric forms). Solution NMR spectra of alkali metal salts of monoanionic calix[4]arenes indicate that they have the cone conformation in solution. Variable-temperature NMR spectra of salts HC4.M (M = Li, Na, K, Rb, Cs) show that they possess similar coalescence temperatures, all higher than that of HC4. Due to steric hindrance from tert-butyl groups in the para position of p-tert-butylcalix[4]arene (Bu(t)C4), the alkali metal salts of monoanionic Bu(t)C4 exist in monomeric or dimeric form in the solid state. Calix[6]arene (HC6) and p-tert-butylcalix[6]arene (Bu(t)C6) were treated with a 2:1 molar ratio of M(2)CO(3) (M = K, Rb, Cs) or a 1:1 molar ratio of MOC(CH(3))(3) (M = Li, Na) to give calix[6]arene monoanions, but calix[6]arenes react in a 1:1 molar ratio with M(2)CO(3) (M = K, Rb, Cs) to afford calix[6]arene dianions. Calix[8]arene (HC8) and p-tert-butylcalix[8]arene (Bu(t)()C8) have similar reactivity. The alkali metal salts of monoanionic calix[6]arenes are more conformationally flexible than the alkali metal salts of dianionic calix[6]arenes, which has been shown by their solution NMR spectra. X-ray crystal structures of HC6.Li and HC6.Cs indicate that the size of the alkali metal has some influence on the conformation of calixanions; for example, HC6.Li has a cone-like conformation, and HC6.Cs has a 1,2,3-alternate conformation. The calix[6]arene dianions show roughly the same structural architecture, and the salts tend to form polymeric chains. For most calixarene salts cation-pi arene interactions were observed.     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性？…

杯芳烃是继冠醚、环糊精之后的第三代主体分子 [1] .据文献 [2 ,3]报道 ,在杯 [4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对 Na+ 有很高的选择性 ,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对 Na+ 的配位 ,而且配位基团所形成的包络空间大小与钠离子相匹配 .一般认为 ,随着包络空间改变 ,对金属离子的识别作用会有所变化[4] .但目前对这方面的工作并没有给予更多的重视 .我们发现 ,用 2 -溴甲基苯甲酸甲酯与杯 [4 ]芳烃反应 ,得到了一种新的四取代杯 [4]芳烃衍生物 2 ,萃取研究结果表明 ,该化合物对钾离子有较…     

Calix[4]quinones derived from double calix[4]arenes: synthesis, complexation, and electrochemical properties toward alkali metal ions

Bis(calix[4]diquinones) 1 and 2 and double calix[4]diquinone 3 have been synthesized from their corresponding double calix[4]arenes 4, 5, and 6, respectively. Compounds 4-6 have been prepared from one-pot and stepwise syntheses under high pressure. Complexation studies of ligands 1-3 with alkali metal ions such as Li+, Na+, K+, and Cs+ were carried out by 1H NMR titrations. Receptors 1 can selectively form 1:1 complexes with Na+. Ligand 2 prefers to form 1:1 complexes with K+ and Cs+. Receptor 3 retained the cone conformation of the calix[4]arene unit upon binding K+ but changed the conformation when complexing Li+ and Na+. Electrochemical studies using cyclic voltammetry and square wave voltammetry showed significant changing of voltammograms of 2 and 3 in the presence of alkali metal ions. Receptor 3 showed the electrochemically switched binding property toward Na+ and K+.     

The solvent extraction of alkali metal picrates with 4,13-N,N'-dibenzyl-4,13-diaza-18-crown-6

Extraction of alkali metal picrates with N,N'-dibenzyl-18-crown-6 was carried out, with dichloromethane as water-immiscible solvent, as a function [ligand]/[metal cation]. The extractability of metal picrates (Li(+), Na(+), K(+), Rb(+), Cs(+)) was evaluated as a function of [L]/[M(+)]. The extractability of complex cation-picrate ion pairs decreases in this sequence: Li(+)>Rb(+)>Cs(+)>K(+)>Na(+). The overall extraction equilibrium constants (K(ex)) for complexes of N,N'-dibenzyl-18-crown-6 with alkali metal picrates between dichloromethane and water have been determined at 25 degrees C. The values of the extraction constants (logK(ex)) were determined to be 10.05, 6.83, 7.12, 7.83, 6.73 for Li(+), Na(+), K(+), Rb(+) and Cs(+) compounds, respectively. DB186 shows almost 2-fold extractability against Li(+) compared to the other metal picrates, whereas it shows no obvious extractability difference amongst the other metal cations when [L]/[M(+)] is 0.2-1. However, an increasing extractability is observed for Cs(+) when [L]/[M(+)] [1].     

Systematic structural coordination chemistry of p-tert-butyltetrathiacalix[4]arene: 1. Group 1 elements and congeners

Determinations of the crystal structures of complexes of the alkali metal ions with, in the case of Li, the dianion and, in the cases Na-Cs, the monoanion of p-tert-butyltetrathiacalix[4]arene have shown that both the sulfur atoms which form part of the macrocyclic ring, as well as the pendent phenolic/phenoxide oxygen donor atoms, are involved in coordination to these metals. Although the Li and Na complex structures are similar to those of the corresponding complexes of p-tert-butylcalix[4]arene, there is no similarity in the structures of the Cs complexes, with the present structure showing no evidence of polyhapto Cs(+)-pi interactions. Instead, the complex crystallizes as a ligand-bridged (S-, O-donor) aggregate of three Cs ions, solvent molecules, and four calixarenes, somewhat like the Rb complex, though here four Rb ions are present, and higher in aggregation than the K+ complex, where two K+ ions are sandwiched between two calixarene moieties. The triethylammonium complex of the thiacalixarene monoanion, though formally analogous in that it involves a monocation, has a simpler structure than any of the alkali metal derivatives, based formally on proton coordination (H-bonding). However, interestingly, it can be isolated in both solvated (dmf, dmso) and unsolvated forms, as indeed can the "free", p-tert-butyltetrathiacalix[4]arene ligand itself.     

Potassium-selective membrane electrodes based on macrocyclic metacyclophanes analogous to calixarenes.

The tetrabutyl ester derived from 9,16,25,32-tetrahydroxy[3.1.3.1]metacyclophane was an excellent ionophore for constructing a K+-selective membrane electrode. This ionophore exhibited a much higher selectivity toward K+ than the structurally similar potassium ionophore IV commercially available from Fluka. In particular, the interference from organic ammonium ions decreased remarkably. Potassium ionophore IV possessed oxygen atoms in the ring structure, while the present ionophore changed the oxygen atoms to carbon atoms. Thus, the removal of oxygen atoms in ring constituents of the metacyclophane acted to reduce the interaction with the NH3+ group of organic ammonium ions. The size of the cavity of the present ionophore was between those of calix[4]arene and calix[6]arene derivatives, which act as Na+ and Cs+ ionophores, respectively, demonstrating that the ability to recognize alkali metal cations was strongly cavity size-dependent. The present K+-selective electrode had less interference from Rb+ and Cs+ than an electrode constructed using valinomycin, but suffered greater interference from Na+.     

Artificial ion channel formed by cucurbit[n]uril derivatives with a carbonyl group fringed portal reminiscent of the selectivity filter of K+ channels

Novel artificial ion channels (1 and 2) based on CB[n] (n = 6 and 5, respectively) synthetic receptors with carbonyl-fringed portals (diameter 3.9 and 2.4 A, respectively) can transport proton and alkali metal ions across a lipid membrane with ion selectivity. Fluorometric experiments using large unilamellar vesicles showed that 1 mediates proton transport across the membranes, which can be blocked by a neurotransmitter, acetylcholine, reminiscent of the blocking of the K+ channels by polyamines. The alkali metal ion transport activity of 1 follows the order of Li+ > Cs+ approximately Rb+ > K+ > Na+, which is opposite to the binding affinity of CB[6] toward alkali metal ions. On the other hand, the transport activity of 2 follows the order of Li+ > Na+, which is also opposite to the binding affinity of 2 toward these metal ions, but virtually no transport was observed for K+, Rb+, and Cs+. It is presumably because the carbonyl-fringed portal size of 2 (diameter 2.4 A) is smaller than the diameters of these alkali metal ions. To determine the transport mechanism, voltage-clamp experiments on planar bilayer lipid membranes were carried out. The experiments showed that a single-channel current of 1 for Cs+ transport is approximately 5 pA, which corresponds to an ion flux of approximately 3 x 107 ions/s. These results are consistent with an ion channel mechanism. Not only the structural resemblance to the selectivity filter of K+ channels but also the remarkable ion selectivity makes this model system unique.     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

Structural Study of Alkaline 1-Phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate Salts: An Example of Periodicity in Alkaline Cations

The alkaline 1-phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate salts, M[C₆H₅N₄CS] (M = Li ( 1 ), Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 )) were obtained and characterized by means of mass spectrometry (FAB⁺) and NMR (¹H; ¹³C) spectroscopy. The structures of Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 ) compounds were determined by X-ray diffraction methods. The ligand shows a rich variety of coordination patterns with the alkaline cations. The formation of a four-membered ring MSCN in the compounds with heavier alkali cations (K, Rb and Cs) is shown. In all the cations the coordination number around it increases with the ionic radius. Compounds with Cs⁺ and Rb⁺ exhibited the formation of Cs-C and Rb-C interactions with the phenyl group.     

Boroarsenates: a framework motif and family templated on cations and anions

Molten salt reactions of NH4H2AsO4, H3BO3, and MX (M = Li, Na, K, Rb Cs, NH4 and X = F, Cl, Br) yield numerous new alkali metal and alkali metal salt templated three-dimensional boroarsenate and fluoroboroarsenate frameworks. The structures of these materials are formed from BO4 (BO3F) and As(O,OH)4 tetrahedra defining channels and interlayer regions containing either simple alkali metal cations or both cations and halide anions. These boroarsenate-based frameworks are unusual in comparison with other oxotetrahedral-based materials in that terminal OH, on As, may be present, decorating the inner surfaces of the channels, as in the 12-membered rings of K2[B(AsO3O)2H]. This unit also permits coordination to nonframework anions as well as cations, so that (Cs2[BAsO3OH]8[AsO4]2[CsCl4]Cl)2 (and its Br analogue) contains layers of [CsCl4]3- and Cl- ions separated and coordinated by the protonated boroarsenate framework.     

Poly(ethylene glycol) doubly and singly cationized by different alkali metal ions: Relative cation affinities and cation-dependent resolution in a quadrupole ion trap mass spectrometer

Structural information of gas phase complexes of poly(ethylene glycol) (PEG) cationized by one or two different alkali metal ions is inferred from MS and MS/MS experiments performed with an electrospray quadrupole ion trap mass spectrometer. The rationale for selecting PEG was that its sites for cation binding are non-selective with respect to the repeating monomeric unit of the polymer, but there is selectivity with respect to the formation of an inner coordination sphere specific to each metal ion. The dissociation of [M1+ M2+ (EO23)], where EO23 = linear polymer of ethylene oxide, 23 units in length, resulted in loss of one of the alkali metal ions, with preference for loss of the larger cation, with no fragmentation of the PEG backbone for Na, K, Rb, and Cs. Li was not examined in this portion of the study. The selectivity for loss of the larger alkali metal ion was [Na+ K+ (EO23)] to [Na+ (EO23)] + K+ at 100%; [K+ Rb+ (EO23)] to [K+ (EO23)] + Rb+ at 93%; and [Rb+ Cs+ (EO23)] to [Rb+ (Eo23)] + Cs+ at 99%. The resolution of [M+ (EOx)] for x = 20-30 was dependent on the alkali metal ion, with the highest resolution observed for Cs+ and the lowest for Na+. These results are discussed with respect to the packing of the oxygen atoms on PEG (M.W.(avg) = 1000) around an alkali metal ion of different radius, and how this packing leads to an ensemble of unique structures, and therefore mobilities for [M+ (EOx)].     

A joint experimental and theoretical study of cation-pi interactions: multiple-decker sandwich complexes of ferrocene with alkali metal ions (Li+, Na+, K+, Rb+, Cs+)

A systematic study of cation-pi interactions between alkali metal ions and the cyclopentadienyl ring of ferrocene is presented. The alkali metal (Li+, Na+, K+, Rb+, Cs+) salts of the ditopic mono(pyrazol-1-yl)borate ligand [1,1'-fc(BMe2pz)2]2- crystallize from dimethoxyethane as multiple-decker sandwich complexes with the M+ ions bound to the pi faces of the ferrocene cyclopentadienyl rings in an eta5 manner (fc = (C5H4)2Fe; pz = pyrazolyl). X-ray crystallography of the lithium complex reveals discrete trimetallic entities with each lithium ion being coordinated by only one cyclopentadienyl ring. The sodium salt forms polyanionic zigzag chains where each Na+ ion bridges the cyclopentadienyl rings of two ferrocene moieties. Linear columns [-CpR-Fe-CpR-M+-CpR-Fe-CpR-M+-](infinity) (R = [-BMe2pz]-) are established by the K+, Rb+, and Cs+ derivatives in the solid state. According to DFT calculations, the binding enthalpies of M+-eta5(ferrocene) model complexes are about 20% higher as compared to the corresponding M+-eta6(benzene) aggregates when M+ = Li+ or Na+. For K+ and Rb+, the degree of cation-pi interaction with both aromatics is about the same. The binding sequence along the M+-eta5(ferrocene) series follows a classical electrostatic trend with the smaller ions being more tightly bound.     

A calixarene based fluorescent Sr2+ and Ca2+ probe

A fluorescent probe, PyCalix, which has two pyrene moieties at the lower rim of a calix[4]arene fixed in the cone conformation was synthesized and its complexation behavior with alkali and alkaline earth cations was studied by fluorescence spectrometry. The compound showed intramolecular excimer emission at approximately 480 nm in the fluorescence spectra. Upon complexation with alkaline earth metal cations, a decrease of excimer emission was observed. The decrease of excimer emission was accompanied by an increase of monomer emission of pyrenes at 397 nm. The order of complexation constants of PyCalix with metal ions was Sr(+ approximately Ca2+ > Ba2+ > Mg2+ > K+ > Na+ > Cs+ for all reagents. PyCalix doped polyvinyl chloride (PVC) membrane was fabricated and our results showed that this membrane can be used for selective detection of Sr2+.     

Computer Analysis of Stability of Alkaline Metal Cation M[222]+ Cryptates in Different Solvents

Russian Journal of General Chemistry - Computer analysis of the thermodynamic constants of complexation of [2.2.2]-cryptand with alkali metal cations (M[222]+ cryptates with M = Li, Na, K, Rb, and...     

Conformational templation in a singly bridged calix[7]arene derivative induced by alkali metal cations

The first examples of alkali metal cation conformational templation of a calix[7]arene derivative were found in the alkali salts of 1,4-calix[7]crown-4, which were obtained by its treatment with the corresponding alkali metal carbonates. Competitive experiments showed that potassium and rubidium cations give the most effective templation, with a slight preference for the former. Experimental results and Monte Carlo conformational searches indicated that the cation interacts with all O-atoms including those of the crown-4 bridge.     

Photometric reagents for alkali metal ions, based on crown-ether complex formation--III. 4'-picrylaminobenzo-15-crown-5 derivatives

An extraction study of alkali metal cations has been made with crown-ether reagents, 4'-picrylaminobenzo-15-crown-5 derivatives (HL). On dissociation in alkaline medium, the orange HL gives the blood-red anion L(-) and extracts alkali metal ions into chloroform as coloured complexes of composition ML.HL or ML. The ease of extraction decreases in the order, K(+) > Rb(+) > Cs(+) > Na(+) > Li(+). The extracted complexes are ML.HL for K(+) and Rb(+), and both ML.HL and ML for Na(+). The Li(+) complex is not extracted. The photometric determination of 10-800 ppm of K(+) is possible in the presence of other alkali and alkaline earth metal ions.     

双层夹心膜电极电位法测定溶剂聚合物膜中杯芳烃-金属离子配合物的生成常数

以双层夹心膜电极为指示电极,采用电位法测定了聚合物膜中活性离子载体杯[6]芳烃乙酯与金属离子形成的配合物的生成常数.提出了一种新的测定夹心膜膜电位的方法,由测得的膜电位可计算出配合物的生成常数.以杯[6]芳烃乙酯为离子载体,测得其与Li⁺,Na⁺,K⁺,Cs⁺和NH⁺₄等离子的配合物生成常数的对数值分别为6.14,6.48.6.74,7.43和6.21.制备了以Cs⁺为主离子的选择性电极,采用固定干扰法,测得对Li⁺,Na⁺,K⁺和NH⁺₄等离子的选择性系数的对数值分别为-3.33,-2.54,-1.6和-2.9.实验结果表明,配合物的生成常数与选择性系数之间有较好的相关性.生成常数越大,电极对相应离子的选择性越高.     

Experimental and theoretical investigation of alkali metal cation interactions with hydroxyl side-chain amino acids

Absolute bond dissociation energies of serine (Ser) and threonine (Thr) to alkali metal cations are determined experimentally by threshold collision-induced dissociation of M+AA complexes, where M+=Li+, Na+, and K+ and AA=Ser and Thr, with xenon in a guided ion beam tandem mass spectrometer. Experimental results show that the binding energies of both amino acids to the alkali metal cations are very similar to one another and follow the order of Li+>Na+>K+. Quantum chemical calculations at three different levels, B3LYP, B3P86, and MP2(full), using the 6-311+G(2d,2p) basis set with geometries and zero-point energies calculated at the B3LYP/6-311+G(d,p) level show good agreement with the experimental bond energies. Theoretical calculations show that all M+AA complexes have charge-solvated structures (nonzwitterionic) with [CO, N, O] tridentate coordination.     

Binding of monovalent metal cations by the p-sulfonatocalix[4]arene: experimental evidence for cation-pi interactions in water

Gibbs free energies, enthalpies and entropies for the binding of Na+, K+, Rb+, Cs+, Ag+, Tl+ and NH4+ by the p-sulfonatocalix[4]arene in water are determined by microcalorimetry. Whereas no significant heat effect is detected with Na+ or Ag+, suggesting that these cations are not complexed, weak but selective binding is observed with the other cations. The whole set of thermodynamic parameters, which demonstrate that the cations bind inside the cavity of the calixarene, evidence the importance of the cation-pi interactions for these complexes in water.