钛酸盐(钴、镓)沸石分子筛的合成与表征

钛酸钴;钛酸镓;水热合成;钛酸盐(钴、镓)沸石分子筛的合成与表征     

锌离子掺杂的二氧化钛介孔空心微球的制备及光催化性能

以二氧化硅为模板,钛酸四丁酯(TBOT)为钛源,硝酸锌为锌源,采用溶胶凝胶法制备了锌离子掺杂的介孔二氧化钛空心微球。采用X射线衍射(XRD)、比表面积(BET)、透射电镜(TEM)、扫描电镜(SEM)和X射线光电子能谱(XPS)等技术对样品进行表征,以亚甲基蓝(MB)的光催化降解为目标反应评价其光催化活性。结果表明,去核之后的复合微球为空心微球,壁厚为20 nm左右。钛酸四丁酯溶液的滴加时间对微球的形貌影响较大,当滴加时间大于15 min时,可以得到结构清晰的空心微球。用氢氧化钠溶液去除二氧化硅核,反应90 min,二氧化硅可以被完全去除。X射线衍射表明,实验得到的掺杂锌离子的空心微球和没有掺杂锌离子的空心微球都是锐钛矿。当锌离子的摩尔分数为0.3%时,二氧化钛空心微球的晶粒尺寸最小,比表面积最大,催化亚甲基蓝降解的效率最高。     

锌离子掺杂的二氧化钛介孔空心微球的制备及光催化性能

以二氧化硅为模板,钛酸四丁酯（TBOT）为钛源,硝酸锌为锌源,采用溶胶凝胶法制备了锌离子掺杂的介孔二氧化钛空心微球。采用X射线衍射（XRD）、比表面积（BET）、透射电镜（TEM）、扫描电镜（SEM）和X射线光电子能谱（XPS）等技术对样品进行表征,以亚甲基蓝（MB）的光催化降解为目标反应评价其光催化活性。结果表明,去核之后的复合微球为空心微球,壁厚为20nm左右。钛酸四丁酯溶液的滴加时间对微球的形貌影响较大,当滴加时间大于15min时,可以得到结构清晰的空心微球。用氢氧化钠溶液去除二氧化硅核,反应90min,二氧化硅可以被完全去除。X射线衍射表明,实验得到的掺杂锌离子的空心微球和没有掺杂锌离子的空心微球都是锐钛矿。当锌离子的摩尔分数为0.3%时,二氧化钛空心微球的晶粒尺寸最小,比表面积最大,催化亚甲基蓝降解的效率最高。     

Sub-micrometer-sized metal tubes from electrospun fiber templates

Metallic tubes have been synthesized by a polymer-based template approach using electroless deposition. Gold, copper, and nickel were deposited as thin films on sub-micrometer polymer fibers which ranged in diameter from approximately 160 to 400 nm. After thermal degradation of the template fibers at 300 and 650 degrees C, tubes between 450 and 730 nm were obtained with wall thicknesses of 50-150 nm. Characterization by scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and powder X-ray diffraction indicate that the tubes have a face-centered cubic structure with [111] preferred orientation for all of the metals investigated and that the tube walls are polycrystalline, composed of nanoparticles, ranging in size from 5.0 to 25.0 nm.     

Effects of PEG4000 template on sol-gel synthesis of porous cerium titanate photocatalyst

Porous cerium titanate was synthesized by sol-gel method, using polyethylene glycol (PEG4000) as template agent. Brannerite structured CeTi₂O₆ in monoclinic system is the major substance formed in the materials. Formation of CeO₂ and rutile TiO₂ depends on the amount of PEG4000. The addition of PEG4000 leads to production of fine particles in the samples, but it does not apparently affect the band gap energy. Pore volume of the cerium titanate sample continuously increases with rising PEG4000 amount. The sample obtained using 3.5 g PEG4000 has BET surface area of 16.2 m²/g and pore volume of 0.0232 cm³/g. The addition of PEG4000 can obviously promote photocatalytic activity of cerium titanate, which can be proven by both enhanced production of hydroxyl radical and ofloxacin degradation efficiency. As much as 95.2% of the initial ofloxacin molecules are removed from the solution after 50 min of photocatalytic degradation on the cerium titanate obtained using 3.5 g PEG4000, while only 48.4% ofloxacin is removed on cerium titanate obtained without PEG4000.     

模板-电泳沉积法制备TiO2纳米棒

室温(约25℃)下,将钛酸四丁酯水解制得TiO2溶胶,利用电泳沉积法在氧化铝模板中填充胶体,经450℃煅烧处理,制备了TiO2纳米棒.用透射电子显微镜和X射线衍射仪对样品进行了表征.结果表明,所得到的TiO2纳米棒表面光滑、致密,直径约180 nm,具有锐钛矿型结构.     

Fabrication and characterization of cerium-doped barium titanate inverse opal by sol-gel method

Cerium-doped barium titanate inverted opal was synthesized from barium acetate contained cerous acetate and tetrabutyl titanate in the interstitial spaces of a polystyrene (PS) opal. This procedure involves infiltration of precursors into the interstices of the PS opal template followed by hydrolytic polycondensation of the precursors to amorphous barium titanate and removal of the PS opal by calcination. The morphologies of opal and inverse opal were characterized by scanning electron microscope (SEM). The pores were characterized by mercury intrusion porosimetry (MIP). X-ray photoelectron spectroscopy (XPS) investigation showed the doping structure of cerium, barium and titanium. And powder X-ray diffraction allows one to observe the influence of doping degree on the grain size. The lattice parameters, crystal size and lattice strain were calculated by the Rietveld refinement method. The synthesis of cerium-doped barium titanate inverted opals provides an opportunity to electrically and optically engineer the photonic band structure and the possibility of developing tunable three-dimensional photonic crystal devices.     

模板法制备过渡金属Ru和Pd纳米管

本文以多孔氧化铝为模板，结合化学沉积法，制备了过渡金属Ru和Pd纳米管。采用XRD，SEM，TEM/HRTEM等测试手段对产物的结构和形貌进行了表征。实验结果表明，反应条件如加热温度、溶液的浓度、气体的组成和流速等对反应产物的结构和形貌有着重要影响。在150～200 ℃相对温和的反应条件下所得纳米管具有比较好的结晶化程度，尺寸均匀，管壁较薄，外径大约100 nm，管壁厚度为3～6 nm。     

煅烧工艺对熔盐法合成钛钾镁片晶的影响

钛酸镁钾具有优异的力学性能,被广泛用作各类高级轿车刹车片的摩擦材料。而材料的组成及形貌对刹车效果的影响很大,传统的合成工艺无法对其进行有效地控制。本文通过对煅烧工艺的优化,从而得到结晶度和形貌俱佳的钛酸镁钾片晶。以Mg(OH)_2、K_2CO_3和TiO_2为原料,加入KCl为熔盐,采用熔盐法合成钛酸钾镁片晶(KMTO)。利用X射线衍射仪(XRD)和扫描电子显微镜(SEM)技术手段研究了煅烧工艺(升温速率、煅烧温度、保温时间)对钛酸钾镁片晶组成及形貌的影响,并对其反应机理进行了初步的探讨。结果表明,不同的煅烧工艺对熔盐法合成钛酸镁钾片晶的组成及形貌产生了显著的影响,以200℃/h升温至800℃后,再以100℃/h升温至1000℃,保温2 h,通过水洗干燥,即可得到结晶度较高、形貌比较均匀的K_(0.8)Mg_(0.4)Ti_(1.6)O_4片晶。     

Tubular carbon nano-/microstructures synthesized from graphite powders by an in situ template process

Through the use of commercial graphite powders as the carbon sources, a variety of interesting tubular carbon nano- and microstructures, such as networked carbon nanotubes, aligned carbon microtubes with hexagonal cross-sections, aligned tapered carbon tubes, and hollow carbon microhorns, have been successfully synthesized. As-grown tubular carbon structures were characterized using scanning electron microscopy, transmission electron microscopy, and X-ray energy-dispersive spectroscopy. An in situ template mechanism was proposed to explain the possible growth process. The vibrational properties of the synthesized tubular carbon structures were also studied by Raman spectroscopy.     

Template synthesis of water-dispersible and magnetically responsive carbon nano test tubes

Water-dispersible and magneto-responsive carbon nano test tubes with a controlled length (1.3 microm) and diameter (35 nm) were synthesized by using the nanochannels of anodic aluminium oxide as a template.     

Hexagonal, hollow, aluminium-containing ZSM-5 tubes prepared from mesoporous silica templates

Hexagonal hollow ZSM-5 tubes were synthesized using mesoporous silica with a worm-like morphology as the template. A new method for aluminium incorporation during the hydrothermal synthesis step was developed.     

三维有序介孔/大孔TiO2微球的制备、表征及光催化性能

以聚甲基丙烯酸甲酯微球为模板,分别以钛酸四丁酯和四异丙醇钛为钛源,通过溶胶-凝胶法辅助模板法制得TiO2纳米微球前驱体,并用程序升温控制其焙烧温度,最终成功制得了具有三维有序介孔/大孔复合结构的TiO2微球.以罗丹明B(RhB)为模型污染物,探索了以不同钛源制备得到的介孔/大孔复合TiO2微球的光催化性能;并采用XRD、SEM、TEM、UV-vis DRS、比表面积测试、光催化性能测试等对样品的晶粒尺寸、物相、形貌、光吸收、比表面积及性能等进行了分析.结果表明,运用溶胶凝胶法辅助模板法能够合成结晶度高、形貌规整、比表面积大、光催化活性良好的锐钛矿相TiO2微球.     

Facile fabrication and characterization of novel polyaniline/titanate composite nanotubes directed by block copolymer

In this work, we present a facile method for preparation of novel polyaniline(PANI)/titanate composite nanotubes by in situ chemical oxidative polymerization directed by poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer. The block copolymer adsorbed onto the surface of the titanate nanotubes acts as a soft template. The obtained nanocomposite has a core-shell structure in which titanate nanotubes are encapsulated by uniform PANI layers. Their structure and morphology were characterized by various experimental techniques. A possible formation mechanism of composite nanotubes is also proposed in the paper.     

Fabrication and thermal analysis of submicron silver tubes prepared from electrospun fiber templates

Submicron silver tubes have been synthesized by a polymer-based template approach. Two different approaches to metallization, electroless deposition and exchange plating, were evaluated within the template approach. Silver films with average thickness approximately 50-100 nm were deposited on polycarbonate fibers approximately 400 nm in diameter by each technique, resulting in tubes with a diameter between 450 and 500 nm after thermal degradation of core fibers. These nanomaterials were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and scanning thermal microscopy. The thermal conductivity of the silver submicron tubes was found to differ depending on the method of preparation, with tubes from electroless plating possessing relative thermal conductivity values that were 1 order of magnitude higher than that from exchange plating, 3000 W/m x K and 660 W/m x K, respectively. Interestingly, these results indicate that silver submicron tubes possess higher thermal conductivity than the bulk metal. This observation is discussed in the context of the continuous conduction path of the tubes and their high surface area-to-volume ratio.     

规则结构钛酸盐自组装聚集体的制备

在水热条件下, 采用不同的钛源, 通过控制溶液碱度和冷却温度等反应条件, 利用无模板自组装技术, 在钛酸盐薄膜表面及溶液相中制备了鸟巢状和绒球状钛酸盐纳米带自组装聚集体以及海胆状钛酸盐纳米管自组装聚集体. 通过引入碳酸钠模板, 制备出形貌新颖的钛酸钠-碳酸钠香蒲状自组装聚集体复合材料. 初步研究了纳米自组装聚集体的形成机理, 认为其形成经历了一维纳米结构(纳米带或纳米管)的生长和一维纳米结构的自组装2个过程.     

Study on the In-situ Synthesis of Aluminum Titanate Sintered by Waste Aluminum Slag

Aluminum titanate was in-situ synthesized by using industrial waste-residue in the aluminum factory and TiO2 as the main raw materials and the influence of different reaction temperatures on the purity and microstructures of synthesized products were mainly discussed. The obtained Al2TiO5 was characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and relevant analytical software. The results show that elevating the sintering temperature can increase the content of aluminum titanate; and at 1420 ℃, it reaches the highest in the synthesized ceramic. When the sintering temperature continues to increase, the produced aluminum titanate will decompose resulting in the drop of its content. Therefore, the optimum sintering temperature of in-situ synthesis of aluminum titanate is determined as 1420 ℃, at which the grains of aluminum titanate grow completely, the purity of aluminum titanate is 89.3wt%., the highest density is 2.75 g/cm^3, and the porosity is 9%.     

Gold tubes membrane with novel morphology replicated from ZnO template

Gold tubes membrane with novel morphology was fabricated on glass substrate by electroless plating gold on ZnO crystals array, and then annealing and removing the ZnO template by acid erosion. The morphology and size of the gold tubes membrane were decided by ZnO template. Hexagonal gold tubes membrane and double-wall gold tubes membrane were obtained, which enjoys some potential usage in electrode modification or chemical separation due to their huge surface area and unique geometric structure. SEM images show that those gold tubes in membrane are hollowed hexagonal columns with a closed head and an open bottom. Further researches found that two main factors determined the success of replication: the gold seeds (4-5 nm in diameter) immobilized on ZnO surface through APTMS (3-Aminopropyl-trimethoxysilane) before gold electroless plating and the annealing condition after electroless plating.     

General sacrificial template method for the synthesis of cadmium chalcogenide hollow structures

Semiconductor CdX (X=Te, Se, S) hollow structures have been successfully prepared by using Cd(OH)Cl precursors as a sacrificial template. The hollow structures can be hollow spheres or tubes by controlling the shape of the sacrificial template. The products were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and energy-dispersive spectrometry. The obtained results showed that the hollow structures had complementary shapes and sizes of the original sacrificial templates. This is a general method for the synthesis of cadmium chalcogenide hollow structures, and the method is simpler and more practical than direct synthesis of certain hollow structures, which further widens the avenue to using those materials that have been synthesized with various shapes to fabricate specific hollow structures.     

聚3-甲基噻吩及聚3-己基噻吩修饰钛酸盐纳米管的光电化学性能研究

采用水热法制备了钛酸盐纳米管, 并将钛酸盐纳米管制备成纳米结构电极进行光电化学研究. 钛酸盐纳米管产生阳极光电流, 具有n-型半导体特性. 结果表明, 聚3-甲基噻吩[poly(3-methylthiophene), PMeT]、聚3-己基噻吩[poly(3-hexylthiophene), P3HT]修饰钛酸盐纳米管后产生的光电流均较纯钛酸盐纳米管的光电流高, 且使产生光电流的波长向长波区移动. 钛酸盐纳米管/PMeT、钛酸盐纳米管/P3HT的光电转换效率分别达11.40%, 0.91%(未校正光子损失). 钛酸盐纳米管/PMeT的光电转换效率较钛酸盐纳米管/P3HT的光电转换效率高10.5%. 钛酸盐纳米管/PMeT、钛酸盐纳米管/P3HT中存在p-n异质结, 在一定条件下p-n异质结的存在有利于光生电子/空穴的分离.