Mechanical design of the recirculating, terminal pumping in the lund pelletron, and experimental experience

A recirculating terminal pumping system has been installed in the 3 MV Pelletron tandem accelerator in Lund. An extremly limited space in the high voltage terminal and the absence of electrical power in the terminal, forced us to provide a unique design for the installation and powering of the new pumps. Details of the technical design, as well as experience of the use of the new system for accelerator mass spectrometry, will be given.     

Development of a superconducting LINAC booster for the pelletron at mumbai

A superconducting linear accelerator (LINAC) to boost the energy of the heavy ion beams from the 14 UD pelletron accelerator at Mumbai is under development. The booster is based on quarter wave resonators (QWR) coated with lead which is superconducting at liquid helium temperature. The operating frequency is 150 MHz. Four resonators each are mounted in a cryostat module built indigenously. A total of seven such modules arranged in two arms with an isochronous and achromatic beam bend in the middle comprises the full LINAC. The transverse focusing of the beam through the LINAC is carried out using periodic quadrupole doublet magnets operating at room temperature. The present status of the project is described.     

A high resolution AMS-injector for the Pelletron in Lund

A high resolution injector system has recently been installed at the Lund 3 MV tandem Pelletron accelerator. The new injector, designed mainly for ²⁶Al ions, will increase the experimental potential of the Lund AMS facility considerably. High quality energy- and mass-resolution is obtained by using a 90° spherical electrostatic analyzer followed by a 90° magnetic analyzer. The injector is equipped with a high intensity sputtering source with a spherical ionizer. A new analytical technique for acceptance calculations as well as PC-based computational methods have been used in the design of the ion optical system of the new injector. Compared to our old injector system which has a magnetic analyzer with a bending angle of only 15°, the new system has a more than ten times better resolution. The beam optics of the new system is also better designed to match the accelerator acceptance. In this way the ion transmission from the ion source to the detector, for different ions of interest in our AMS programme, has been increased.