Retention mechanisms in subcritical water reversed-phase chromatography

Differences in the properties of subcritical water and conventional water/acetonitrile and water/methanol mobile phases for reversed phase separations are explored. Using van’t Hoff plots enthalpies and entropies of transfer are compared among the mobile phases while linear solvation energy relationships are used to quantify contributions to retention based on a solute's polarizability, dipolarity, hydrogen bond donating ability, hydrogen bond accepting ability, and molecular size. Results suggest the presence of acetonitrile or methanol in the mobile phase may decrease dispersive interactions of the solute with the stationary phase compared to subcritical water, thereby lowering enthalpic contributions to retention. Enthalpic contributions are found to drive the retention of a methylene group in all systems studied.     

Separation of nonpolar analytes using methanol-water mixtures at elevated temperatures

Pure subcritical water has been found to be an efficient mobile phase for reversed-phase separations of both polar and moderately polar compounds. However, subcritical water must be modified with organic solvent in order to elute nonpolar analytes in an efficient manner. In this study, the separation of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and benzene, toluene, and p-xylene (BTX) was performed by using heated methanol-water mixtures as the mobile phase. Temperatures employed in this study ranged from 21 to 140 °C, while the percentage of methanol in the mobile phase ranged from 52 to 90%. The retention times of analytes were matched under different mobile phase conditions by increasing the temperature and decreasing the percentage of methanol in the mobile phase.     

Enhanced‐fluidity liquid chromatography using mixed‐mode hydrophilic interaction liquid chromatography/strong cation‐exchange retention mechanisms

The potential of enhanced‐fluidity liquid chromatography, a subcritical chromatography technique, in mixed‐mode hydrophilic interaction/strong cation‐exchange separations is explored, using amino acids as analytes. The enhanced‐fluidity liquid mobile phases were prepared by adding liquefied CO₂ to methanol/water mixtures, which increases the diffusivity and decreases the viscosity of the mixture. The addition of CO₂ to methanol/water mixtures resulted in increased retention of the more polar amino acids. The “optimized” chromatographic performance (achieving baseline resolution of all amino acids in the shortest amount of time) of these methanol/water/CO₂ mixtures was compared to traditional acetonitrile/water and methanol/water liquid chromatography mobile phases. Methanol/water/CO₂ mixtures offered higher efficiencies and resolution of the ten amino acids relative to the methanol/water mobile phase, and decreased the required isocratic separation time by a factor of two relative to the acetonitrile/water mobile phase. Large differences in selectivity were also observed between the enhanced‐fluidity and traditional liquid mobile phases. A retention mechanism study was completed, that revealed the enhanced‐fluidity mobile phase separation was governed by a mixed‐mode retention mechanism of hydrophilic interaction/strong cation‐exchange. On the other hand, separations with acetonitrile/water and methanol/water mobile phases were strongly governed by only one retention mechanism, either hydrophilic interaction or strong cation exchange, respectively.     

Overview of the retention in subcritical fluid chromatography with varied polarity stationary phases

Retention and separation of achiral compounds in supercritical fluid chromatography (SFC) depend on numerous parameters: some of these parameters are identical to those encountered in HPLC, such as the mobile phase polarity, while others are specific to SFC, as the density changes of the fluid, due to temperature and/or pressure variations. Additional effects are also related to the fluid compressibility, leading to unusual retention changes in SFC, for instance when flow rate or column length is varied. These additional effects can be minimised by working at lower temperatures in the subcritical domain, simplifying the understanding of retention behaviours. In these subcritical conditions, varied modifiers can be mixed to carbon dioxide, from hexane to methanol, allowing tuning the mobile phase polarity. With nonpolar modifiers, polar stationary phases are classically used. These chromatographic conditions are close to the ones of normal-phase LC. The addition of polar modifiers such as methanol or ACN increases the mobile phase polarity, allowing working with less polar stationary phases. In this case, despite the absence of water, retention behaviours generally follow the rules of RP LC. Moreover, because identical mobile phases can be used with all stationary phase types, from polar silica to nonpolar C18-bonded silica, the classical domains, RP and normal-phase, are easily brought together in SFC. A unified classification method based on the solvation parameter model is proposed to compare the stationary phase properties used with the same subcritical mobile phase.     

Retention properties of acetone-water mobile phases on a biphenylsiloxane-bonded silica stationary phase in reversed-phase liquid chromatography

The solvation parameter model system constants and retention factors were used to interpret retention properties of 39 calibration compounds on a biphenylsiloxane-bonded stationary phase (Kinetex biphenyl) for acetone-water binary mobile phase systems containing 30–70% v/v. Variation in system constants, phase ratios, and retention factors of acetone-water binary mobile phases systems were compared with more commonly used acetonitrile and methanol mobile phase systems. Retention properties of acetone mobile phases on a Kinetex biphenyl column were more similar to that of acetonitrile than methanol mobile phases except with respect to selectivity equivalency. Importantly, selectivity differences arising between acetone and acetonitrile systems (the lower hydrogen-bond basicity of acetone-water mobile phases and differences in hydrogen-bond acidity, cavity formation and dispersion interactions) could be exploited in reversed-phase liquid chromatography method development on a Kinetex biphenyl stationary phase.     

Evaluation of ternary mobile phases for reversed-phase liquid chromatography: Effect of composition on retention mechanism

The effect of varying mobile phase composition across a ternary space between two binary compositions is examined, on four different reversed-phase stationary phases. Examined stationary phases included endcapped C8 and C18, as well as a phenyl phase and a C18 phase with an embedded polar group (EPG). Mobile phases consisting of 50% water and various fractions of methanol and acetonitrile were evaluated. Retention thermodynamics are assessed via use of the van’t Hoff relationship, and retention mechanism is characterized via LSER analysis, as mobile phase composition was varied from 50/50/0 water/methanol/acetonitrile to 50/0/50 water/methanol acetonitrile. As expected, as the fraction of acetonitrile increases in the mobile phase, retention decreases. In most cases, the driving force for this decrease in retention is a reduction of the enthalpic contribution to retention. The entropic contribution to retention actually increases with acetonitrile content, but not enough to overcome the reduction in the enthalpic contribution. In a similar fashion, as methanol is replaced with acetonitrile, the v, e, and a LSER system constants change to favor elution, while the s and c constants change to favor retention. The b system constant did not show a monotonic change with mobile phase composition. Overall changes in retention across the mobile phase composition range varied, based on the identity of the stationary phase and the composition of the mobile phase.     

Effects of modifiers in subcritical fluid chromatography on retention with porous graphitic carbon

The effect of different modifiers in subcritical fluid chromatography (SubFC) on interactions between solute and porous graphitic carbon (PGC) and between solute and carbon dioxide-modifier mobile phases was studied by the use of linear solvation energy relationships (LSERs). This study was performed to allow efficient optimization of the composition of the carbon dioxide-modifier mobile phase in regard of the chemical nature of the solutes to be separated. With all modifiers tested (methanol, ethanol, n-propanol, isopropanol, acetonitrile, tetrahydrofuran and hexane), the solute/stationary phase interactions are greater than the solute/mobile phase ones. Dispersion interactions and charge transfer between electron donor solute and electron acceptor PGC mainly explain the retention on this surface, whatever the modifier. These interactions are quite constant over the range of modifier percentage studied (5-40%). For acidic compounds, the retention variation is mainly related to the change in the basic character of mobile and stationary phase due to the variation of modifier percentage. Changes in eluting strength are mostly related to adsorption of mobile phase onto the PGC with methanol and acetonitrile, and to the increase of dispersion interactions between the solute and the mobile phase for other modifiers. Relationships between varied selectivities and solvation parameter values have been studied and are discussed in this paper.     

System Maps for Retention of Small Neutral Compounds on a Superficially Porous Ethyl-Bridged,Octadecylsiloxane-Bonded Silica Stationary Phase in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an ethyl-bridged, ocatadecylsiloxane-bonded superficially porous silica stationary phase (Kinetex EVO C18) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not methanol–water mobile phase compositions. Compared with a superficially porous octadecylsiloxane-bonded silica stationary phase (Kinetex C18) with a similar morphology but different topology statistically significant differences in selectivity at the 95% confidence level are observed for neutral compounds that vary by size and hydrogen-bond basicity with other intermolecular interactions roughly similar. These selectivity differences are dampened with acetonitrile–water mobile phases, but are significant for methanol–water mobile phase compositions containing <30% (v/v) methanol. A comparison of a totally porous ethyl-bridged, octadecylsiloxane-bonded silica stationary phase (XBridge C18) with Kinetex EVO C18 indicated that they are effectively selectivity equivalent.     

Reversed-phase high-performance liquid chromatography of ionogenic compounds: comparison of retention models

Two kinds of retention models describing a behaviour of ionogenic substances in reversed-phase chromatographic systems were compared. Model A utilises a concept of limiting retention factors and is especially suitable for the prediction of retention of compounds co-existing in several forms in mobile phase. An effect of the concentration of organic modifier (e.g., methanol) on the magnitudes of the limiting retention factors and equilibrium constants (dissociation constants of the separated substances) can be expressed with the aid of various, more or less sophisticated, relationships. A stoichiometric displacement model (model B) in its original form simply relates the analyte retention to the content of organic modifier in the mobile phase. In this work, it was modified to also express an effect of the mobile phase pH introducing side equilibria (acid-base) into the model. Both models predict a sigmoidal dependence of the analyte retention factor on the mobile phase pH in accordance with experimental data, and allow, among others, to estimate dissociation constants from those data. Experimental dependencies between the analyte retention and the concentration of methanol in the mobile phase comply well with model A, whereas the stoichiometric displacement model could be used only in a limited range of the methanol concentrations.     

Influence of solvent effects on retention in reversed-phase liquid chromatography and solid-phase extraction using a cyanopropylsiloxane-bonded,silica-based sorbent

Summary The solvation parameter model is used to characterize the retention properties of a cyanopropylsiloxanebonded, silica-based sorbent with methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as mobile phases. The system constants over the composition range 1 to 50 % (v/v) organic solvent indicate that retention occurs because of the relative ease of cavity formation in the solvated stationary phase compared to the same process in the predominantly aqueous mobile phase as well as from more favorable stationary phase interactions with solutes containing π- and n-electrons. The capacity of the solute for dipole-type interactions is not important whereas all hydrogen-bond-type interactions result in reduced retention. Graphing the system constants as a function of mobile phase composition provides a simple mechanism for interpreting the change in capacity of the chromatographic system for retention in terms of changes in the relative weighting of fundamental intermolecular interactions. A comparison is also made with the retention properties of an octadecylsiloxane-bonded, silica-based sorbent with 30 % (v/v) methanol in water as the mobile phase and the extraction characteristics of a porous polymer sorbent with 1 % (v/v) methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as the sample processing solvent. Changes in sorbent selectivity due to selective uptake of the processing solvent are much smaller for the cyanopropylsiloxane-bonded sorbent than the results found for a porous polymer sorbent.     

Comparison of Retention Indices of Some Monosubstituted Benzenes Calculated by Different Mathematical Methods in RP-LC

In reversed phase liquid chromatography, the retention indices of benzene and nine mono substituted benzenes with different functionality based on the alkan-2-ones and alkyl aryl ketones retention index standards have been determined by the application of two new mathematical adaptation methods, viz. a multiparametric least-squares regression iterative method based on the determination of the adjusted retention times and a local cubic interpolation method directly using the total retention times. The two methods were applied to two types of columns. The first group includes four octadecyl-C₁₈ columns with different packing materials obtained from different manufacturers, while the second comprises an octyl-C₈ column. The retention indices have been extensively studied using either methanol–water or acetonitrile–water mobile phase systems. The influences of the concentration of the organic modifier in the mobile phase (methanol or acetonitrile), the column temperature, and the column packing material on retention indices of the set of the ten monoaromatics studied were also investigated. The calculated multiparametric retention indices values, those obtained by the local cubic interpolation and Kováts’ methods are compared. Good agreement was observed between the retention indices calculated by the three methods.     

Insights into the Retention Mechanism of Small Neutral Compounds on Octylsiloxane-Bonded and Diisobutyloctadecylsiloxane-Bonded Silica Stationary Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an octylsiloxane-bonded (Kinetex C8) and diisobutyloctadecylsiloxane-bonded (Kinetex XB-C18) superficially porous silica stationary phases for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not for methanol–water mobile phases. Compared with an octadecylsiloxane-bonded silica stationary phase (Kinetex C18) retention is reduced due to a less favorable phase ratio for both the octylsiloxane-bonded and diisobutyloctadecylsiloxane-bonded silica stationary phases while selectivity differences are small and solvent dependent. Selectivity differences for neutral compounds are larger for methanol–water but significantly suppressed for acetonitrile–water mobile phases. The selectivity differences arise from small changes in all system constants with solute size and hydrogen-bond basicity being the most important due to their dominant contribution to the retention mechanism. Exchanging the octadecylsiloxane-bonded silica column for either the octylsiloxane-bonded or diisobutyloctadecylsiloxane-bonded silica column affords little scope for extending the selectivity space and is restricted to fine tuning of separations, and in some cases, to obtain faster separations due to a more favorable phase ratio. For weak bases larger differences in relative retention are expected with acetonitrile–water mobile phases on account of the additional cation exchange interactions possible that are absent for the octadecylsiloxane-bonded silica stationary phase.     

反相色谱多二元溶剂的选择性调整

从统计热力学方法推导的溶质保留规律及其相关参数与分子结构之间的关系式出发,探讨了１６种多环芳烃在甲醇／水、乙腈／水、异丙醇／乙腈３种二元溶剂体系下选择性的差异,为确立复杂化合物分离的溶剂选择原则奠定了基础。     

Effect of amine mobile phase additives on chiral subcritical fluid chromatography using polysaccharide stationary phases

Increased retention and selectivity in the subcritical fluid chromatography (SFC) of various amine compounds on polysaccharide chiral stationary phases (CSP) was observed upon incorporation of cyclic amines into the modifier. The retention increases are most pronounced with 2-propanol and are almost absent when methanol is used as modifier. This suggests that the effect may arise from a restriction to the modifier access to the binding site required to effect elution. The effect of the amine additives in SFC does not remain after their removal from the mobile phase. Findings were applied to the development of a 5 min separation of amphetamine and methamphetamine enantiomers.     

Isolation by Means of Preparative Reversed-Phase Liquid Chromatography of Epimeric Alcohols Formed Upon Reduction of Pregnenolone and Progesterone

Abstract

A method is described which permits complete separation on a preparatory scale of the 20R and 20S epimeric alcohols obtained from lithium aluminium hydride and sodium borohydride reduction of pregnenolone and progesterone, respectively. The retention behaviour and resolution obtained on chromatography of the epimers on C-18 bonded phase material and elution with different acetonitrile/water and methanol/water mobile phases were studied. The order of retention is in both cases in accordance with ¹H-NMR chemical shift data which indicate a stable conformation with a more exposed 20-OH group in the 20S (=20α) epimer. Deviations from the elution order expected for true reversed-phase retention mechanisms were found on elution with mobile phase systems of reduced water content.     

A chemometric investigation of the selectivity of multisolvent mobile phase systems in RP-HPLC

Summary The selectivity of multisolvent mobile phase systems consisting of water, methanol, acetonitrile and tetrahydrofuran was studied when the solvent strength decreases at a constant ratio of the modifiers. From the retention measurements of six benzene derivatives on an octylsilica column at eleven different mobile phase compositions the relation between the logarithm of the capacity factor of each solute and the mobile phase composition was modeled by a quadratic equation. From the models the capacity factors of the solutes were predicted for 3 binary, 3 ternary and 7 quaternary mobile phase systems when the fraction of water decreases and the ratio of the organic modifiers is kept constant for the tenary and quaternary solvent systems. The selectivity factors, alpha, of five pairs of solutes were calculated from the capacity factors and plotted against the solvent strength of the mobile phase systems. The selectivity remained not constant, but varied with the solvent strength: if the water fraction of a multi-solvent system is changed at a constant ratio of the modifiers, not only the solvent strength, but also the selectivity changes. The consequence of this result for optimization strategies is discussed.     

Factors Affecting the Interpretation of Selectivity on Synergi Reversed-Phase Columns

The solvation parameter model is used to establish the contribution of cohesion, dipole-type, and hydrogen-bonding interactions to the retention mechanism on Synergi Hydro-RP, Fusion-RP, and Polar-RP reversed-phase columns with methanol–water mobile phases containing from 10–70% (v/v) methanol. Large changes in relative retention on the compared columns can result from steric resistance, differences in the phase ratios, and from dewetting at low methanol compositions while changes in intermolecular interactions are responsible for smaller changes at a fixed mobile phase composition. For Synergi Hydro-RP and Polar-RP changing methanol for acetonirile is more powerful for affecting changes in retention order than changing the stationary phase. The three Synergi columns show useful selectivity differences for method development when compared with 13 other modern reversed-phase columns representing a selection of different stationary phase chemistries. The results from this study indicate the limitations of classifying reversed-phase columns by the retention of prototypical compounds to define specific retention mechanisms.     

溶质在动态改性氧化锆液相色谱柱上的保留行为

分别采用硬脂酸、环糊精和十二烷基磺酸钠动态改性自制的ZrO2微球,研究了流动相中甲醇和改性剂浓度对苯酚及苯甲酸的衍生物、苯胺衍生物及芳香烃类化合物的色谱保留行为的影响。中性及碱性化合物的保留时间较短,色谱峰对称;酸性化合物保留时间较长,色谱峰拖尾较严重。改性氧化锆表现出反相色谱性能。     

Influence of solvent effects on retention in reversed-phase liquid chromatography and solid-phase extraction using a cyanopropylsiloxane-bonded,silica-based sorbent

Summary The solvation parameter model is used to characterize the retention properties of a cyanopropylsiloxane-bonded, silica-based sorbent with methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as mobile phases. The system constants over the composition range 1 to 50% (v/v) organic solvent indicate that retention occurs because of the relative ease of cavity formation in the solvated stationary phase compared to the same process in the predominantly aqueous mobile phase as well as from more favorable stationary phase interactions with solutes containing - and n-electrons. The capacity of the solute for dipole-type interactions is not important whereas all hydrogen-bond-type interactions result in reduced retention. Graphing the system constants as a function of mobile phase composition provides a simple mechanism for interpreting the change in capacity of the chromatographic system for retention in terms of changes in the relative weighting of fundamental intermolecular interactions. A comparison is also made with the retention properties of an octadecylsiloxane-bonded, silica-based sorbent with 30% (v/v) methanol in water as the mobile phase and the extraction characteristics of a porous polymer sorbent with 1% (v/v) methanol, acetonitrile, tetrahydrofuran, and isopropanol in water as the sample processing solvent. Changes in sorbent selectivity due to selective uptake of the processing solvent are much smaller for the cyanopropylsiloxane-bonded sorbent than the results found for a porous polymer sorbent.