荧光动力学二阶校正法定量分析人血浆样中去甲肾上腺素

提出了荧光动力学结合二阶校正算法实现人血浆样中去甲肾上腺素的间接定量测定新方法. 去甲肾上腺素本身荧光较弱, 在碱性溶液中可以被氧化生成强荧光化合物. 利用这一特性, 在pH值为9.06的硼酸缓冲液作用下采用铁氰化钾为氧化剂、抗坏血酸为抗氧化剂研究这一氧化反应过程. 设定激发波长为390 nm, 在发射波长为439～550 nm的范围内测定一段时间内连续时间点的该动力学反应中间物的荧光光谱, 构建三维响应数据阵, 然后运用三线性分解算法进行解析. 组分数N取3时, 采用基于平行因子分析(PARAFAC)算法的二阶校正法获得的平均回收率(AR)为(102.0±4.1)%, 预测残差平方根(RMSEP)为0.0197; 采用基于满秩平行因子分析(FRA-PARAFAC)算法的二阶校正法获得的平均回收率(AR)和预测残差平方根(RMSEP)分别为(102.4±4.0)%和0.0207. 两种算法可以得到相似且满意的结果.     

玻璃标样结合硫内标归一定量技术在激光剥蚀-等离子体质谱分析硫化物矿物中的应用

以硬石膏矿物标样中Ca相对于S的灵敏度因子为基准,将玻璃标样中主量和痕量元素相对于Ca的灵敏度因子转换成元素相对于S的灵敏度因子,建立了多玻璃标样结合硫内标归一定量技术分析硫化物单矿物多元素的新方法。利用本方法分析了美国合成多金属硫化物矿物标样MASS-1中20种元素,主量元素分析结果的相对误差小于10%,痕量元素分析结果几乎都落在给定值±不确定度范围内。利用本方法对12个硫化物单矿物分析结果表明,绝大多数主量元素含量测定值的相对误差小于10%,且多数主量元素甚至优于以MASS-1为外标、内标归一定量法及内标校准法分析结果,而痕量元素与MASS-1校准结果较为一致。本方法克服了基体不匹配的问题,能比较准确地定量分析硫化物矿物中的主成分S,可用于定量校准硫化物矿物。     

A Robust Near-Infrared Calibration Model for the Determination of Chlorophyll Concentration in Tree Leaves with a Calibration Transfer Method

A method based on piecewise direct standardization was developed to directly predict leaf chlorophyll concentrations by correction of near-infrared spectra to construct a robust calibration model. Chinar, camphor, and gingko leaves collected from two growth intervals were evaluated. Spectral pretreatment methods and wavelength selection were investigated. The first derivative combined with stability competitive adaptive reweighted sampling before piecewise direct standardization provided the best performance. Under the optimized parameters, the root mean square error of prediction was significantly reduced by using piecewise direct standardization. This study demonstrates that the calibration model may be used to rapidly characterize chlorophyll concentrations across species and growth intervals.     

三维荧光二阶校正法用于复杂基体样中川芎嗪和替米沙坦的快速定量分析

采用三维荧光光谱法,结合化学计量学中基于交替归一加权残差(ANWE)算法的二阶校正方法,实现了人血浆样品中川芎嗪和替米沙坦的同时快速定量分析.当组分数N取4时,ANWE算法解析获得的川芎嗪和替米沙坦的平均回收率分别为99.3士3.5%和96.8±2.0%.本文同时给出了此方法的检测限(LOD)与定量下限(LOQ),获得...     

Si内标-X射线衍射法定量测定铁矿中Fe3O4、Fe2O3和SiO2

铁矿物相的准确定量对矿物价值评价及选冶工艺研究有重要作用,现有化学法流程复杂效率低,X射线衍射全谱拟合法可溯源性差,结果准确性难以评价和验证。本研究建立了以Si为内标,以Cu靶X射线为辐射光源,步进扫描方式获得衍射谱图,以待测相含量为横坐标,待测相与内标相峰面积比值为纵坐标建立校准曲线,以曲线对铁矿中Fe3O4、Fe2O3和SiO2物相进行定量的方法。试验对制样条件、扫描参数、内标物选择、积分方式、重叠峰校正等进行了优化选择,结果表明,试样全部通过45 μm标准筛,Si内标比例为10%,步进长度0.01°,步进时间30S,选择对Fe3O4（311）、Fe2O3（104）、SiO2（011）和Si（111）的衍射峰进行积分强度计算,可获得最优结果。在选定工作条件下,Fe3O4在1.07～100%范围内线性相关系数(R2)为0.9953,相对标准偏差(RSD)1.1%～13.2% (n=6),加标回收率99.7 %~114.8 %,检出限(LOD)4.29%;Fe2O3在1.51～100%范围内线性相关系数(R2)为0.9991,相对标准偏差(RSD)2.8%～10.6% (n=6),加标回收率87.1%~112.2%,检出限(LOD)2.56%;SiO2在0.79～29.72 %范围内线性相关系数(R2)为0.9957,相对标准偏差(RSD)3.2%～10.3% (n=6),加标回收率86.6%~98.9%,检出限(LOD)0.68%。方法易溯源、准确性易评价和验证,适合开展标准化检测和应用。     

三维荧光二阶校正法用于未知混合物中苯酚含量的测定

将三维荧光光谱技术与秩消失因子分析、广义秩消失因子分析和交替三线性分解3种二阶校正方法相结合,建立了测定未知混合物中苯酚含量的三维荧光二阶校正新方法。设定在激发波长240~280 nm和发射波长280~360 nm范围内测定未知混合物中苯酚的三维荧光光谱,构建三维响应数据阵,运用基于三线性分解的二阶校正算法进行解析。结果表明,当模拟样品的组分数为2时,秩消失因子分析、广义秩消失因子分析和交替三线性分解3种方法测定苯酚的预测均方根误差分别为0.33,1.18和0.15,平均回收率分别为101.6%,115.6%和101.9%;当组分数为3时,3种方法的预测均方根误差则分别为1.61,1.80和0.51,平均回收率分别为134.2%,133.9%和107.1%;将其分别应用于实际样品中苯酚的测定,结果满意,且交替三线性分解法的测定结果优于秩消失因子分析法和广义秩消失因子分析法。     

高效液相色谱-内标法测定碘硝酚原料及其注射液中碘硝酚的含量

建立了碘硝酚的高效液相色谱(HPLC)-内标法检测方法。用甲醇将样品配制成测试浓度后过滤,经依利特Sino Chrom C_(18)(4.6 mm×200 mm,5μm)色谱分析柱进行色谱分离,流动相为0.02 mol/L磷酸二氢钾溶液(pH 2.6)-甲醇(30∶70),流速为1 mL/min,紫外检测波长为235 nm,柱温为30℃,内标物为硝氯酚,进样量为20μL。结果表明,碘硝酚的质量浓度在20~120 mg/L范围内呈线性关系,相关系数(r)为0.999 6;在3个不同浓度(64、80、96 mg/L)加标水平下,平均回收率为90.4%~98.2%,相对标准偏差(RSD)为0.18%~0.72%;检出限(LOD,S/N=3)为0.15 mg/L,定量下限(LOQ,S/N=10)为1.5 mg/L。该方法的精密度、稳定性以及重复性良好,且操作简便,结果准确,可用于碘硝酚原料药及注射液的含量测定。     

Determination of poisonous metals in wastewater collected from paint manufacturing plant using laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy (LIBS) system was developed for determination of toxic metals in wastewater collected from local paint manufacturing plant. The plasma was generated by focusing a pulsed Nd:YAG laser at 1064 nm on the solid residue from wastewater collected from paint industry. The concentration of different elements of environmental significance like, lead, copper, chromium, calcium, sulphur, magnesium, zinc, titanium, strontium, nickel, silicone, iron, aluminum, barium, sodium, potassium and zirconium, in paint wastewater were 6, 3, 4, 301, 72, 200, 20, 42, 4, 1, 35, 120, 133, 119, 173, 28 and 12 mg kg⁻¹, respectively. The evaluation of potential and capabilities of LIBS as a rapid tool for paint industry effluent characterization is discussed in detail. Optimal experimental conditions were evaluated for improving the sensitivity of our LIBS system through parametric dependence study. The laser-induced breakdown spectroscopy (LIBS) results were compared with the results obtained using standard analytical technique such as inductively coupled plasma emission spectroscopy (ICP). The relative accuracy of our LIBS system for various elements as compared with ICP method is in the range of 0.03-0.6 at 2.5% error confidence. Limits of detection (LOD) of our LIBS system were also estimated for the above mentioned elements.     

超高效液相色谱-串联质谱法对癍痧凉茶中18种活性成分的定量分析

建立了超高效液相色谱-串联质谱(UHPLC-MS/MS)测定癍痧凉茶中18种活性成分的定量分析方法。癍痧凉茶样品经甲醇萃取后,采用RRHD SB-C18(100 mm×3.0 mm,1.8μm)超高效液相色谱柱进行分离,以0.5%甲酸水溶液-乙腈为流动相进行梯度洗脱。18种活性成分的定量分析采用三重四极杆串联质谱以负离子检测模式多重反应离子监测进行。实验结果表明,所建立的方法线性良好,18种目标化合物的线性相关系数(r)不小于0.996 4;分析方法的灵敏度高,检出限和定量下限分别为0.001~0.08μg/m L和0.002~0.27μg/m L;同时具备精密度高、准确度好、稳定性理想等优点。建立的分析方法用于测定11批"黄振龙"癍痧凉茶和8批"平安堂"凉茶。结果表明,"黄振龙"和"平安堂"样品中18种活性成分的浓度分别为0.7~149.8μg/m L和0.9~110.3μg/m L。采用主成分分析(PCA)对这19批次癍痧凉茶样品进行来源追踪,并对其质量的稳定性和一致性进行了评价。PCA得分图可将两个厂家的癍痧凉茶明显区分开,提示两种凉茶的配方组成及生产工艺不同,所建立的分析方法可有效用于癍痧凉茶的质量评价与控制。     

Speciation and detection of arsenic in aqueous samples: A review of recent progress in non-atomic spectrometric methods

Inorganic arsenic (As) displays extreme toxicity and is a class A human carcinogen. It is of interest to both analytical chemists and environmental scientists. Facile and sensitive determination of As and knowledge of the speciation of forms of As in aqueous samples are vitally important. Nearly every nation has relevant official regulations on permissible limits of drinking water As content. The size of the literature on As is therefore formidable. The heart of this review consists of two tables: one is a compilation of principal official documents and major review articles, including the toxicology and chemistry of As. This includes comprehensive official compendia on As speciation, sample treatment, recommended procedures for the determination of As in specific sample matrices with specific analytical instrument(s), procedures for multi-element (including As) speciation and analysis, and prior comprehensive reviews on arsenic analysis. The second table focuses on the recent literature (2005–2013, the coverage for 2013 is incomplete) on As measurement in aqueous matrices. Recent As speciation and analysis methods based on spectrometric and electrochemical methods, inductively coupled plasma-mass spectrometry, neutron activation analysis and biosensors are summarized. We have deliberately excluded atomic optical spectrometric techniques (atomic absorption, atomic fluorescence, inductively coupled plasma-optical emission spectrometry) not because they are not important (in fact the majority of arsenic determinations are possibly carried out by one of these techniques) but because these methods are sufficiently mature and little meaningful innovation has been made beyond what is in the officially prescribed compendia (which are included) and recent reviews are available.