The reactions of alkylamino substituted phosphines with I2 and (Ph2Se2I2)2: structural features of alkylamino phosphonium cations

The reactions of the tris-dialkylamino phosphines (Et2N)3P and (nPr2N)3P, and the pyrrolidinyl substituted phosphines (C4H8N)3P and tBuP(NC4H8)2, with I2 and (Ph2Se2I2)2, have been reported. The reactions with diiodine lead to the formation of [R3PI]I adducts, which are essentially ionic, but show a tendency to display long, soft-soft, II interactions in the solid state. The crystal structures of [(Et2N)3PI]I, (1), [(nPr2N)3PI]I, (2), and [(C4H8N)3PI]I, (3), have all been determined, and display II interactions varying between 3.5170(6) and 3.6389(14) A. The analogous reactions with (Ph2Se2I2)2 lead to the formation of phenylseleno-phosphonium salts, [R3PSePh]I. The structures of [(C4H8N)3PSePh]I, (6) and [(C4H8N)2tBuPSePh] I, (7), have been determined and do not display any soft-soft interactions between the selenium and iodine atoms. All of the phosphonium salts represent examples of structures containing tris-dialkylamino phosphine fragments which show no special nitrogen atom, i.e. all three nitrogen atoms are planar. This type of arrangement is usually observed when a C3 symmetric conformation is observed, (which is the case for 1 and 2), but not for the (C4H8N)3P adducts 3 and 6, where the conformation is closer to Cs, although the nitrogen atoms are still essentially planar. The P-N bonds in all the compounds reported herein are short, ranging between 1.599(12) A and 1.643(12) A, and are consistent with the previously reported short P-N bonds in phosphonium salts featuring tris-dialkylamino substituted phosphines.     

Reactions of Ph4Se4Br4 with tertiary phosphines. Structural isomerism within a series of R3PSe(Ph)Br compounds

The synthesis and characterisation of Ph(4)Se(4)Br(4) (1) directly from the reaction of Ph(2)Se(2) with dibromine is reported. The solid-state structure of 1 consists of four PhSeBr units linked by weak selenium-selenium bonds [3.004(2)-3.051(2) A] into a Se(4) square, and is structurally analogous to the previously reported Ph(4)Te(4)I(4). The reactions of Ph(4)Se(4)Br(4) with a variety of tertiary phosphines have been undertaken, resulting in the formation of compounds of formula R(3)PSe(Ph)Br. X-Ray crystallographic analysis of three of the compounds reveals different structural isomers. Ph(3)PSe(Ph)Br (2) is a charge-transfer (CT) compound [Se-Br 3.0020(8) A], with an essentially linear P-Se-Br bond angle, 172.15(4) degrees and T-shaped geometry at selenium. Me(3)PSe(Ph)Br (5) also contains the selenium atom in a T-shaped geometry, consistent with a CT formulation, although the Se-Br distance of 3.327(3) A is considerably longer than observed for 2. In contrast, Cy(3)PSe(Ph)Br (6) is an ionic phosphonium salt, [Cy(3)PSePh]Br with no short Se-Br interactions. Geometry at selenium is bent, as expected for an ionic compound. These results are discussed with reference to the previously reported iodo-compounds Ph(3)PSe(Ph)I and [(Me(2)N)(3)PSe(Ph)]I.     

Chimeric supramolecular synthons in Ph2Te2(I2)Se

Iodination of Ph₂Te₂Se by molecular iodine is directed towards the Te atom and yields {diiodo[(phenyltellanyl)selanyl]‐λ⁴‐tellanyl}benzene, PhTeSeTeI₂Ph or C₁₂H₁₀I₂SeTe₂. The molecule can be considered as a chimera of PhTeSeR, PhTeSeTePh and R′TeI₂Ph fragments. The crystal structure features a complex interplay of the supramolecular synthons Te…π(Ph), Se…Te and I…Te, combining molecules into a three‐dimensional framework. Their combination affords long‐range supramolecular synthons which are fused in a way resembling the mythological chimera and could be defined as chimeric supramolecular synthons. The energies of the intermolecular interactions have also been calculated and analyzed.     

Reaction of carbon dioxide with arylcopper(I) complexes containing tertiary phosphines

ArCu^I compounds (Ar = phenyl, o-, m-, or p-tolyl) do not react with carbon dioxide at appreciable rate, but in the presence of triphenylphosphine in appropriate solvents undergo insertion to give the corresponding carboxylato complexes ArCO₂Cu(PPh₃)₂. In the presence of diphos the carbon dioxide absorption was very slow and mainly gave (ArCO₂Cu)₂diphos₃ complexes. The (diphenylphosphino)methane (DPM) derivatives [ArCO₂CuDPM]₂ and (ArCO₂Cu)₂DPM were prepared by other methods for comparison. The X-ray structure of HCO₂Cu(PPh₃)₂ is reported.     

Two-, three-, and four-coordination at gold(I) supported by the bidentate selenium ligand [Ph2P(Se)NP(Se)Ph2](-)

Treatment of the gold(I) halide complexes LAuCl (L = PMe3, PPh3, CNC6H3Me2-2,6) with K[Ph2P(Se)NP(Se)Ph2] provides the gold-selenium coordination compounds [(N(Ph2PSe)2-Se,Se')AuL]. However, on standing for a number of days, the complex [(N(Ph2PSe)2-Se,Se')AuPMe3] gains a phosphine to provide the bis(phosphine) species [(N(Ph2PSe)2-Se,Se')Au(PMe3)2]. Treatment of the K[Ph2P(Se)NP(Se)Ph2] ligand with [(Ph3PAu)3O]BF4 allows the isolation of [(N(Ph2PSe)2-Se,Se')(AuPPh3)2]BF4. Reaction of the complex [(dppm)(AuCl)2] with AgSO3CF3 followed by addition of the ligand K[Ph2P(Se)NP(Se)Ph2] results in the formation of [(N(Ph2PSe)2-Se,Se')Au2(dppm)]OSO2CF3 and treatment of [(tht)AuCl] (tht = tetrahydrothiophene) with an equimolar quantity of K[Ph2P(Se)NP(Se)Ph2] affords the complex [(N(Ph2PSe)2-Se,Se')2Au2]. The compounds [(N(Ph2PSe)2-Se,Se')Au2(dppm)]OSO2CF3, [(N(Ph2PSe)2-Se,Se')AuPPh3] and [(N(Ph2PSe)2-Se,Se')Au(PMe3)2] have been investigated crystallographically. The results reveal that the metal centers are two-, three-, and four-coordinate, respectively. The cationic, eight-membered ring complex bearing the dppm ligand displays transannular aurophilic bonding and is further associated into dimers via intermolecular gold-selenium contacts. The six-membered rings in the other two structures have C2-symmetrical twist conformations, however, the Au(I) coordination sphere in [N(PPh2Se)2]AuPPh3 is not fully symmetrical. The Au-Se bond lengths increase dramatically as the coordination number of the metal atom becomes larger.     

Synthesis,characterization and catalytic applications of rhodium(I) organometallics with substituted tertiary phosphines

Organometallics of the type [Rh(COD)(L)Cl] (where, L = carboxyl/formyl/pyridyl tertiary phosphines) have been synthesized by treating the precursor [Rh(COD)Cl]₂ with substituted tertiary phosphines. [Rh(COD)(Ph₂P-2-C₆H₄COO)] and [Rh(COD)(Ph₂P-CH₂COO)] were synthesized by halide abstraction from the precursor [Rh(COD)Cl]₂ in the presence of AgPF₆ in tetrahydrofuran by involving 2-carboxy phenyl/carboxy methyl group of tertiary phosphines in coordination as bidentate ligands. Similarly, the cationic compounds of the type [Rh(COD)L₂]PF₆ were also synthesized by treating [Rh(COD)Cl]₂ in the presence of AgPF₆. All these compounds were characterized by elemental analysis, conductance measurements, IR, ¹H, ¹³C, ³¹P NMR, mass, and electronic spectral studies. [Rh(COD)(Ph₂-P-2-C₆H₄COOH)Cl] and [Rh(COD)(Ph₂-P-2-C₆H₄COO)] were studied on the catalytic reduction reactions of 2-nitroanisole, 3-nitro anisole, 4-nitroanisole, 2-nitrobenzoicacid, 3-nitrobenzoicacid, 4-nitrobenzoicacid under mild conditions and [Rh(COD)(Ph₂-P-2-C₆H₄COO)] was found to be more efficient than [Rh(COD)(Ph₂-P-2-C₆H₄COOH)Cl]. This article is dedicated to Dr. D. R. M Walton, who successfully completed his tenure as Editor-in-Chief, Transition Metal Chemistry.     

Reactivity of [Mo(NHNRPh)(NNRPh)(acac)X2] (R=Ph,Me; X=Br,I) toward tertiary phosphines

The reactivity of mixed [organohydrazido(1-)][organohydrazido(2-)]molybdenum(VI) complexes [Mo(NHNRPh)(NNRPh)(acac)X₂] {R?=?Ph, X?=?Br (1); R?=?Ph, X?=?I (2) and R?=?Me; X?=?I (3)} with tertiary phosphines as PPh₃, PMePh₂ and PMe₂Ph are examined. The syntheses of [Mo(NNPh₂)₂Br₂(PPh₃)] (4), [Mo(NNPh₂)₂Br₂(PMePh₂)₂] (5), [Mo(NNPh₂)₂Br₂(PMe₂Ph)₂] (6), [Mo(NNPh₂)₂(acac)I(PPh₃)] (7), [Mo(NNPh₂)₂(acac)(PMePh₂)₂]⁺I^? (8) and [Mo(NNMePh)₂(acac)(PMePh₂)₂]⁺I^? (9) are reported. All complexes were characterized by elemental analysis, UV-visible, IR, ¹H and ³¹P{H} NMR spectroscopy.     

Reactions of Et(3)ZnLi with ketones: electronic and steric effects(1)

Toluene solutions of composition Et(3)ZnLi react rapidly with aldehydes and ketones to form addition products. Et(3)ZnNa and Et(3)ZnK solutions react readily with the same substrates although metalation, as well as addition, is significant with substrates having alpha-hydrogens. The Et(3)ZnM solutions react with 2-cyclohexenone to give mainly the 1,4-addition product. Relative rates of addition of Et(3)ZnLi to substituted acetophenones give a Hammett rho of 2.78. Addition of Et(3)ZnLi to acetophenone is slowed significantly by alpha and ortho methyl substituents; relative rates of addition to acetophenone, o-methylacetophenone, and tert-butyl phenyl ketone are 1.00, 0.012, and 0.003.     

The steric and electronic effects of aliphatic fluoroalkyl groups

Ab initio calculations were performed on 18 fluorinated and unfluorinated alcohols at the B3LYP and HF levels with the 6-311G^∗∗ basis set. Molar volumes of the alcohols were computed at each level and averaged to produce a scale of relative size. From this, various isosteric replacements of potential use in drug design were suggested: ethyl by FCH₂CH₂ or HCF₂CH₂, propyl by CF₃CH₂, isopropyl by CF₃(CH₃)CH or (FCH₂)₂CH, isobutyl or t-butyl by (CF₃)₂CH, and 3-methyl-2-butyl by CF₃(CH₃)₂C. Calculation of the charge on oxygen and the Wiberg index of the CO bond allowed an electronegativity scale to be constructed for the fluoroalkyl groups. Electronegativity decreased in the order: (CF₃)₃C>(CF₃)₂CH>C₂F₅CH₂>CF₃CH₂>CH₃(CF₃)₂C>HCF₂CH₂>CF₃(CH₃)CH>(FCH₂)₂CH>FCH₂CH₂>CF₃(CH₃)₂C. This ranking agreed with literature acid dissociation data for the alcohols studied.     

Ruthenium olefin metathesis catalysts with modified styrene ethers: influence of steric and electronic effects

A series of olefin metathesis catalysts with modified isopropoxybenzylidene ligands were synthesised, and the effects of ligands on the rate of metathesis investigated. Increased steric hinderance ortho to the isopropoxy group enhanced reaction rates. In the case of N-heterocyclic carbene complexes, decreasing electron density at both the chelating oxygen atom and the RuC bond accelerated reaction rates appreciably. Catalysts containing a tricyclohexylphosphane ligand, followed the same trend with regard to benzylidene electrophilicity, while higher electron density at oxygen enhanced reaction rates.     

Reactions of [Ru(H(2)O)(6)](2+) with water-soluble tertiary phosphines

In aqueous solutions under mild conditions, [Ru(H(2)O)(6)](2+) was reacted with various water-soluble tertiary phosphines. As determined by multinuclear NMR spectroscopy, reactions with the sulfonated arylphosphines L =mtppms, ptppms and mtppts yielded only the mono- and bisphosphine complexes, [Ru(H(2)O)(5)L](2+), cis-[Ru(H(2)O)(4)L(2)](2+), and trans-[Ru(H(2)O)(4)L(2)](2+) even in a high ligand excess. With the small aliphatic phosphine L = 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1(3,7)]decane (pta) at [L]:[Ru]= 12:1, the tris- and tetrakisphosphino species, [Ru(H(2)O)(3)(pta)(3)](2+), [Ru(H(2)O)(2)(pta)(4)](2+), [Ru(H(2)O)(OH)(pta)(4)](+), and [Ru(OH)(2)(pta)(4)] were also detected, albeit in minor quantities. These results have significance for the in situ preparation of Ru(II)-tertiary phosphine catalysts. The structures of the complexes trans-[Ru(H(2)O)(4)(ptaMe)(2)](tos)(4)x2H(2)O, trans-[Ru(H(2)O)(4)(ptaH)(2)](tos)(4)[middle dot]2H(2)O, and trans-mer-[RuI(2)(H(2)O)(ptaMe)(3)]I(3)x2H(2)O, containing protonated or methylated pta ligands (ptaH and ptaMe, respectively) were determined by single crystal X-ray diffraction.     

Transition metal allyls : IV. The (η3-allyl)2M complexes of nickel,palladium and platinum: reaction with tertiary phosphines

A series of 1 : 1 adducts have been prepared by treating the bis-η³-allyl complexes of nickel, palladium and platinum with tertiary phosphines. Investigations of their structure in solution as well as in the crystal have shown that both 18-electron (η³-allyl)₂ML complexes as well as 16-electron (η¹-allyl)-(η³-allyl)ML complexes may be formed.     

Electronic and steric effects in fragmentation reactions of Os3(CO)9(mu-C4Ph4)

P-Donor nucleophiles of cone angle >or=145 degrees are known to react with Os3(CO)9(mu-C4Ph4) quite differently from those with cone angles 相似文献   

Reactions of dichloro-bis-[N(1)-benzyl-2-(arylazo)imidazole] ruthenium(II) with tertiary phosphines

The title reaction proceeds smoothly in MeOH-H2O togive the salts [RuCl(P)L2](ClO4), H2O (1, 2) or [Ru(PP)L2](ClO4)2, H2O (3, 4) where L=N(1)-benzyl-2-(arylazo)imidazole, P=PPh3, or PPh2Me, and PP=Ph2P(CH2)2PPh2 (dppe) or Ph2P(CH2)3PPh2(dppp). The complexes have been characterised by physico-chemical and spectroscopic methods.     

Reaction of trans-dichloro-bis[N(1)-methyl-2-(arylazo)imidazole] ruthenium(II) with tertiary phosphines

Trans-dichloro-bis[N(1)-methyl-2-(arylazo)imidazol e] ruthenium(II) (tcc-Ru(MeL)2Cl2) reacts with tertiary phosphines giving rise to species of type [RuCl(P)-(MeL)2]+ and [Ru(P-P)(MeL)2]2+ in which Cl, P and P-P respectively occupy cis-positions [P=PPh3, or PPh2Me; P-P=Ph2P(CH2)2PPh2 (dppe) or Ph2P (CH2)3PPh2 (dppp)]. The cations have been isolated as perchlorates. The complexes display allowed t2(Ru) *(MeL) transitions in the visible region and show the energy ordering [RuCl(P)(MeL)2]+<[Ru(P-P) (MeL)2]2+. The RuIII/II couple occurs at high potentials, >1.1 V versus s.c.e. The azo reduction is sensitive to the nature of substituents in the ligand. The 1H n.m.r. spectra of the complexes are compatible with the isomer of C1-symmetry.     

Mixed ligand gold(I) complexes with phosphines and selenourea

A series of mixed ligand Au^I complexes with selenourea (Seu) and various phosphines, [R₃PAuSeu]Cl, have been prepared and characterized by elemental analysis, i.r. and n.m.r. methods. A decrease in the i.r. frequency of the C=Se mode of Seu upon complexation is indicative of Au^I binding via a selenone group. An upfield shift in the ¹³C-n.m.r. for the C=Se resonance of Seu, and downfield shifts in ³¹P-n.m.r., for the R₃P moiety are consistent with selenium coordination to Au^I.     

Synthesis and Characterization of New N-(Diphenylphosphino)-Naphthylamine Chalcogenides: X-Ray Structures of (1-NHC10H7)P(Se)Ph2 and Ph2P(S)OP(S)Ph2

Abstract

The reaction of 1-naphthylamine with one equivalent of chlorodiphenylphosphine in the presence of triethylamine gave the (1-NHC₁₀H₇)PPh₂ (1) ligand. Refluxing of 1 with elemental sulfur or grey selenium in toluene (1:1 molar ratio) afforded (1-NHC₁₀H₇)P(S)Ph₂ (2) and (1-NHC₁₀H₇)P(Se)Ph₂ (3), respectively. Moreover, the byproduct {Ph₂P(S)}₂O (4) was isolated from the reaction of 1 with elemental sulfur. Compounds 1–3 were identified and characterized by multinuclear (¹H, ¹³C, ³¹P, ⁷⁷Se) NMR spectroscopy, mass spectrometry, and elemental analysis. Crystal structure determinations of 3 and 4 were carried out.     

The heats of reaction of phosphines and phosphites with toluene-molybdenum tricarbonyl. Importance of both steric and electronic factors in determining the Mo---PR3 bond strength

The heats of reaction of tolueneMo(CO)₃ with a series of phosphines and phosphites have been measured by solution calorimetry. The order of stability toward formation of fac-(PR₃)₃Mo(CO)₃ in THF solution is: P(OCH₃)₃s> PMe₃ > PⁿBu₃ > PMe₂Ph> PEt₃ > triphos> P(OPh)₃ > PMePh₂ > PPh₃ > PCl₃ and spans a range of 25 kcal/mol reflecting individual bond strength differences up to 8 kcal/mol. The bulky phosphines PCy₃ and P^tBu₃ react with tolueneMo(CO)₃ in THF, but 30–40 kcal/mol less heat is evolved in these reactions than with the other phosphines and phosphites. The coordinately unsaturated five-coordinate complexes (PR₃)₂Mo(CO)₃ are proposed as the reaction products. The importance of both steric and electronic factors in the Mo---P bond is discussed.     

Nitrophenylmethane and nitromethane complexes of copper(I) with tertiary phosphines or heterocyclic nitrogen donors and some of their oxidation products

Mixed copper(I) complexes with nitrophenylmethane (NPMH) of the following stoicheiometries Cu(NPM)L₂ (L = PPh₃, pyridine; L−L = bis(diphenylphosshino)methane, 2,2′-bipyridine), (CuNPM)₂ (L−L)₃ (L−L = 1,2-bis(diphenylphosphino)ethane) and [Cu(L−L)₂]NPM (L−L = 1,10-phenanthroline) have been isolated and characterized. The corresponding phosphine complexes of the nitromethane are also described. In the complexes of the nitrophenylmethane cleavage of the PhCH = group occurs easily, while the NO₂ group remains bounded to the copper atom as nitrite ligand.     

Cyclization of Ph2Si(NHNHMe)2. I. Reaction with n-BuLi/Ph2SiCl2 and ring rearrangement

Reaction of Ph₂Si(NHNHMe)₂ ( 1 ) with n-BuLi and Ph₂SiCl₂ in 1 : 2 : 1 ratio afforded 54% of 1,2,4-triaza-1-methyl-4-methylamino-3,3, 5, 5-tetraphenyl-3,5-disilacylopentane ( 2 ). In the presence of a catalytic amount of n-BuLi, 2 is rearranged to two isomers, 1,2,4,5-tetraaza-1,4-dimethyl-3,3,6,6-tetraphenyl-3,6-disilacyclohexane ( 3 ) and 1,2,4,5-tetraaza-1,5-dimethyl-3,3,6,6-tetraphenyl-3,6-disilacyclohexane ( 4 ), with 3 as the major product. The crystal structure of 3 reveals a twist-boat conformation of the Si₂N₄ ring [a = 10.691(4) Å, b = 13.178(4) Å, c = 17.812(3) Å, β = 95.11(7)°; monoclinic, P2₁/n; Z = 4], in which each N(Me) N(H) unit contains one pyramidal (NH) and one planar (NMe) nitrogen.