Control of the Helical Chirality of Enantiopure Sulfinyl (Z)‐Azobenzene‐Based Photoswitches

A new class of enantiopure ortho,ortho‐disubstituted azobenzene photoswitches has been synthesized from (S)‐2‐(p‐tolylsulfinyl)benzoquinone and arylhydrazines. The sulfoxide acts as a unidirectional controller of the helical chirality that arises in the Z isomer after photoisomerization. Highly congested E‐azobenzenes 5 c showed two atropisomeric diastereoconformers in the solid state that converged upon irradiation into a unique Z isomer with defined helicity (M), as evident in the X‐ray structure. The chiroptical properties of this three‐state enantiopure switch can be externally tuned both photochemically and/or thermally. Theoretical CD spectra calculated by using time‐dependent DFT methods support the existence of two atropoisomeric E isomers and only one Z isomer with (M) helicity. Complementary to the classical azobenzene‐based switches, the photoswiching event is promoted under green/blue light and do not occur under UV irradiation.     

Conformational Studies on Peptides of α‐Aminoxy Acids with Functionalized Side‐Chains

Peptides of homochiral α‐aminoxy acids of nonpolar side chains can form a 1.8₈‐helix. In this paper, we report the conformational studies of α‐aminoxy peptides 1 , 2 , 3 , which have functionalized side chains, in both nonpolar and polar solvents. ¹H NMR, XRD, and FTIR absorption studies confirm the presence of the eight‐membered‐ring intramolecular hydrogen bonds (the N‐O turns) in nonpolar solvents as well as in methanol. CD studies of peptides 1 , 2 , 3 in different solvents indicate that a substantial degree of helical content is retained in methanol and acidic aqueous buffers. The introduction of functionalized side chains in α‐aminoxy peptides provides opportunities for designing biologically active peptides.     

Poly(phenylacetylene)s bearing a peptide pendant: helical conformational changes of the polymer backbone stimulated by the pendant conformational change

Optically active, cis-transoid poly(phenylacetylene) derivatives bearing a poly(gamma-benzyl-L-glutamate) [poly(PBGAm)] or poly(L-glutamic acid) [poly(PGAm)] chain as the pendant were prepared by polymerisation of the corresponding macromonomer with a rhodium catalyst followed by hydrolysis of the pendant ester groups. Their conformational changes in solution, induced by a helix-coil transition of the pendant polypeptides, were investigated using circular dichroism (CD) and absorption spectroscopies. A series of macromonomers with a different peptide chain lengths was synthesised by the polymerisation of the N-carboxyanhydride of gamma-benzyl-L-glutamate with a phenylacetylene bearing an alanine residue as the initiator. The obtained macromonomers (PBGAm) were further polymerised with a rhodium catalyst in N,N-dimethylformamide (DMF) to yield novel poly(phenylacetylene)s [poly(PBGAm)] with a poly(gamma-benzyl-L-glutamate) pendant. The poly(PBGAm) exhibited an induced circular dichroism (ICD) in the UV/Vis region of the polymer backbone in dimethyl sulfoxide (DMSO), probably due to the prevailing one-handed helix formation. The Cotton effect signs of a DMSO solution of the poly(PBGAm) were inverted and accompanied by a visible colour change in the presence of an increasing amount of chloroform or DMF containing lithium chloride. The results suggest that poly(PBGAm) may undergo a conformational change such as a helix-helix transition with a different helical pitch responding to a change in the alpha-helix content of the poly(gamma-benzyl-L-glutamate) pendant. Moreover, a water-soluble poly(PGAm) also showed a similar, but dramatic change in its helical conformation with a visible colour change stimulated by a helix-coil transition of the pendant poly(L-glutamic acid) chains by changing the pH in water.     

Introducing the Chiral Constrained α-Trifluoromethylalanine in Aib Foldamers to Control,Quantify and Assign the Helical Screw-Sense**

Oligomers of α-aminoisobutyric acid (Aib) are achiral peptides that adopt 3₁₀ helical structures with equal population of left- and right-handed conformers. The screw-sense preference of the helical chain may be controlled by a single chiral residue located at one terminus. ¹H and ¹⁹F NMR, X-ray crystallography and circular dichroism studies on new Aib oligomers show that the incorporation of a chiral quaternary α-trifluoromethylalanine at their N-terminus induces a reversal of the screw-sense preference of the 3₁₀-helix compared to that of a non-fluorinated analogue having an l -α-methyl valine residue. This work demonstrates that, among the many particular properties of introducing a trifluoromethyl group into foldamers, its stereo-electronic properties are of major interest to control the helical screw sense. Its use as an easy-to-handle ¹⁹F NMR probe to reliably determine both the magnitude of the screw-sense preference and its sign assignment is also of remarkable interest.     

Helix Nucleation by the Smallest Known α‐Helix in Water

Cyclic pentapeptides (e.g. Ac‐(cyclo‐1,5)‐[KAXAD]‐NH₂; X=Ala, 1 ; Arg, 2 ) in water adopt one α‐helical turn defined by three hydrogen bonds. NMR structure analysis reveals a slight distortion from α‐helicity at the C‐terminal aspartate caused by torsional restraints imposed by the K(i)–D(i+4) lactam bridge. To investigate this effect on helix nucleation, the more water‐soluble 2 was appended to N‐, C‐, or both termini of a palindromic peptide ARAARAARA (≤5 % helicity), resulting in 67, 92, or 100 % relative α‐helicity, as calculated from CD spectra. From the C‐terminus of peptides, 2 can nucleate at least six α‐helical turns. From the N‐terminus, imperfect alignment of the Asp5 backbone amide in 2 reduces helix nucleation, but is corrected by a second unit of 2 separated by 0–9 residues from the first. These cyclic peptides are extremely versatile helix nucleators that can be placed anywhere in 5–25 residue peptides, which correspond to most helix lengths in protein–protein interactions.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.     

Tricks of Light on Helices: Transformation of Helical Polymers by Photoirradiation

The following polymer structural transitions were achieved using light: preferred‐handed helix formation for poly(9,9‐di‐n‐octylfluoren‐2,7‐diyl), helix racemization (helix–helix transition) for poly(2,7‐bis(4‐t‐butylphenyl)fluoren‐9‐yl acrylate) and poly(2,5‐bis[4‐((S)‐2‐methylbutyloxy)phenyl]styrene), and helix decomposition for poly(2,7‐bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate) and poly(2,7‐bis(4‐t‐butylphenyl)fluoren‐9‐ylmethyl methacrylate). Although these types of transitions and chemical transformations have been studied mainly using heat or chemicals as stimuli, light can also cause these structural alterations. In the helix construction and the helix–helix transition, a key transition is a twist‐coplanar conformational change of a biphenyl or an aryl–aryl unit in the side chain or the main chain of the polymer. Furthermore, the helix–helix transition was caused only by light and not by heat. The examples discussed in this review are expected to trigger off a new direction in synthesis and reaction of chiral polymers.     

Crosslinked Aspartic Acids as Helix‐Nucleating Templates

Described is a facile helix‐nucleating template based on a tethered aspartic acid at the N‐terminus [terminal aspartic acid (TD)]. The nucleating effect of the template is subtly influenced by the substituent at the end of the side‐chain‐end tether as indicated by circular dichroism, nuclear magnetic resonance, and molecular dynamics simulations. Unlike most nucleating strategies, the N‐terminal amine is preserved, thus enabling further modification. Peptidomimetic estrogen receptor modulators (PERMs) constructed using this strategy show improved therapeutic properties. The current strategy can be regarded as a good complement to existing helix‐stabilizing methods.     

Propeller-Shaped Semi-fused Porphyrin Trimers: Molecular-Symmetry-Dependent Chiroptical Response

Triple helicene-like semi-fused trimeric Ni^II porphyrins were constructed by alkyne trimerization of an ethynyl-substituted porphyrin and subsequent three-fold Grignard addition to the formyl groups and acid-catalyzed intramolecular cyclization. The presence of stereogenic sp³ carbons in the central bridge leads to small inter-porphyrin conjugative interactions as was revealed by electrochemical and optical properties. Two diastereomers with stable chiral conformations were optically resolved, and the separated enantiomers displayed considerably intense circular dichroism. Importantly, the chiroptical response of C₃-symmetric helical isomer (|Δϵ|=830 m ⁻¹ cm⁻¹) is 1.8 times amplified from that of C₁-symmetric one (|Δϵ|=470 m ⁻¹ cm⁻¹). The observed amplification has been interpreted in terms of different spatial arrangements of the three porphyrins.