Spontaneous vesicle formation of single chain and double chain cationic surfactant mixtures

The concentration vs composition diagram of aggregate formation of the dodecyltrimethylammonium bromide (DTAB) and didodecyldimethylammonium bromide (DDAB) mixture in aqueous solution at rather dilute region was constructed by analyzing the surface tension, turbidity, and electrical conductivity data and inspected by cryo-TEM images and dynamic light scattering data. Although the aqueous solution of DTAB forms only micelles, the transition from monomer to small aggregates and then to vesicle was found at 0.1 < X2 相似文献   

Fluorescence, circular dichroism, light scattering, and microscopic characterization of vesicles of sodium salts of three N-acyl peptides

Aggregation behavior of three N-acyl peptide surfactants, sodium N-(4-n-dodecyloxybenzoyl)-L-alyl-L-valinate (SDBAV), L-valyl-L-alaninate (SDBVA), and L-valyl-L-valinate (SDBVV), were investigated. The amphiphiles have very low critical aggregation concentration (cac). Fluorescence anisotropy studies using 1,6-diphenyl-1,3,5-hexatriene (DPH) as a fluorescent probe indicated formation of bilayer aggregates in dilute solution. Transmission electron micrographs showed the existence of large vesicles in dilute solution. Circular dichroism spectra suggested formation of helical aggregates. The vesicle formation was found to be more favored at neutral pH. Dynamic light scattering was used to measure hydrodynamic radius of the vesicles. The microviscosity of the vesicles formed by the amphiphiles was determined by use of fluorescence anisotropy and the lifetime of the DPH probe. The vesicles formed by the surfactants are stable at temperatures above body temperature and for a long period of time. Fluorescence probe studies, however, indicated transformation of vesicles to rod-like micelles at surfactant concentrations much higher than the cac value. Addition of sodium chloride also transformed the vesicles to rod-like micelles.     

Synthesis and characterization of cross-linked reverse micelles

The design and synthesis of a new cross-linkable amphiphile is reported. Solutions of the amphiphile in a toluene/water mixture form reverse micelles as indicated by dynamic light scattering and NMR spectroscopy. As indicated by dynamic light scattering, TEM, and NMR spectroscopy data, these reverse micelles can be cross-linked without drastically changing the radius of the reverse micelles. Mixed reverse micelles are also characterized and cross-linked. The cross-linked reverse micelles are demonstrated to facilitate phase transfer and can be used to site isolate a catalyst.     

Structural evolution of a two-component organogel

Dry reverse micelles of AOT in isooctane spontaneously undergo a microstructural transition to an organogel upon the addition of a phenolic dopant, p-chlorophenol. This microstructural evolution has been studied through a combination of light scattering, small-angle neutron scattering (SANS), NMR, and rheology. Several equilibrium stages between the system of dry reverse micelles of AOT and a 1:1 AOT/p-chlorophenol (molar ratio) gel in isooctane have been examined. To achieve this, p-chlorophenol is added progressively to the dilute solutions of AOT in isooctane, and this concentration series is then analyzed. The dry micelles of AOT in isooctane do not undergo any detectable structural change up to a certain p-chlorophenol concentration. Upon a very small increment in the concentration of p-chlorophenol beyond this "threshold" concentration, large strandlike aggregates are observed which then evolve to the three-dimensional gel network.     

Structure and size of spontaneously formed aggregates in Aerosol OT/PEG mixtures: effects of polymer size and composition

Dynamic light scattering and Cryo-TEM measurements have allowed us to obtain the size and structure of spontaneous aggregates formed by mixtures of Aerosol OT, AOT, and ethylene glycol polymers of different molecular mass. The results presented in this work show that small unilamellar vesicles predominate in pure Aerosol OT solutions and in dilute polymer solutions mixed with AOT. In the latter case, elongated micelles coexist with unilamellar vesicles. When polymer concentration increases above a certain concentration, the small vesicles disappear and the size of the elongated micelles decreases to a radius compatible with spherical micelles. For PEG concentrations above the overlapping ones, spherical micelles coexist with very large aggregates probably formed by large rod like micelles or by superstructures of elongated micelles embedded in a polymer network. This behavior is consistent with theoretical models based in molecular mean-field theory [M. Rovira-Bru, D.H. Thompson, I. Szleifer, Biophys. J. 83 (2002) 2419]. The properties of the different types of aggregates are obtained by fluorescence spectroscopy and electrophoretic mobility measurements.     

Formal kinetics of growth of nanosized silver particles upon silver nitrate reduction with sodium citrate in a reverse micellar solution of AOT

The growth kinetics of silver nanoparticles upon silver(I) reduction with sodium citrate in an aqueous solution solubilized to a reverse micellar solution of sodium bis(2-ethylhexyl) sulfosuccinate in decane is studied spectrophotometrically under constant conditions of irradiation of the reaction mixture with visible light. The formal kinetics of the process corresponds to an autocatalytic mechanism. The effective rate constants of growth of silver nanoparticles, unlike those of gold nanoparticles, are independent of the size of the inner micellar cavity when its radius changes from 2 to 6 nm. This is most likely due to a great effect of the photochemical factor or Ag⁺ localization in the inner surface layer of the micelles on the rate constants.     

Light scattering and cryo-transmission electron microscopy investigation of the self-assembling behavior of Di-C12P-nucleosides in solution

Aggregates formed from freshly prepared and annealed samples of dilauroyl-phosphatidyl-adenosine, dilauroyl-phosphatidyl-uridine, and their 1:1 mixture have been investigated by dynamic light scattering, cryo-transmission electron microscopy (cryo-TEM) observations, and circular dichroism. The two surfactants differ only for the nucleoside at the phospholipid polar headgroup and self-assemble in solution to form supramolecular structures that behave dissimilarly. The uridine derivative forms long wormlike aggregates that are invariant with the aging of the solution, while the wormlike aggregate of the adenosine derivative undergoes, as the sample ages, a subsequent self-assembling process forming giant helicoidal aggregates that coexist with the smaller wormlike aggregates. Dynamic light scattering and cryo-TEM show that the large helicoidal structures are formed at the expense of the small wormlike micelles. The 1:1 mixture behaves as the adenosine derivative and evolves to form giant superstructures for all the lipid concentrations investigated. Circular dichroism measurements suggest that the formation of the supramolecular helicoidal structure might not be driven by a purely chiral effect, but rather stacking and hydrogen bonding, present at the phospholipid headgroups of the self-assembled nucleosides, contribute to the final supramolecular structure.     

An Experimental Study on the Relationship between the Physical Properties of CTAB/Hexanol/Water Reverse Micelles and ZrO2-Y2O3 Nanoparticles Prepared

Based on the studies of their physical properties such as aqueous solution uptake, electric conductivity, and microstructure, CTAB/hexanol/water reverse micelles (CTAB, cetyltrimethyl ammonium bromide) were used to prepare ZrO2-Y2O3 nanoparticles. The relationship between the micelle microstructure and size, morphology, and aggregate properties of particles prepared was also investigated. It has been found that with high CTAB concentration ([CTAB] > 0.8 mol/l), the reverse micelles can solubilize a sufficient amount of aqueous solution with high metallic ion concentration ( approximately 1.0 mol/L), while the microstructure of the reverse micelles keeps unchanged. The most important factor affecting the size and shape of reverse micelles was found to be the water content w0 (w0, molar ratio of water to surfactant used). When both the CTAB concentration and the w0 values are low, the diameters of reverse micelles are below 20 nm, and the ZrO2-Y2O3 particles prepared are also very small. However, the powders obtained were found to form a lot of aggregates after drying and calcination. High CTAB concentration, high w0 value, and high metallic ion concentration in the aqueous phase for high powder productivity were found to be the suitable compositions of reverse micelles for preparing high-quality ZrO2-Y2O3 nanoparticles. Under these conditions, the reverse micelles are still spherical in shape even the reverse micellar system is nearly saturated with aqueous solutions. These reverse micelles were found to have a diameter of between 60 and 150 nm and the ZrO2-Y2O3 particles prepared therefrom range from 30 to 70 nm with spherical shape and not easy to form aggregates. Copyright 1999 Academic Press.     

Coexisting aggregates in mixed aerosol OT and cholesterol microemulsions

Dynamic light scattering and NMR spectroscopic experimental evidence suggest the coexistence of two compositionally different self-assembled particles in solution. The self-assembled particles form in solutions containing water, Aerosol OT (AOT, sodium bis(2-ethylhexyl) sulfosuccinate) surfactant, and cholesterol in cyclohexane. In a similar series of studies carried out in 1-octanol only one aggregate type, that is, reverse micelles, is observed. Dynamic light scattering measurements reveal the presence of two different types of aggregates in the microemulsions formed in cyclohexane, demonstrating the coexistence of two compositionally distinct structures with very similar Gibbs energies. One particle type consists of standard AOT reverse micelles while the second type of particle consists of submicellar aggregates including cholesterol as well as small amounts of AOT and water. In microemulsions employing 1-octanol as the continuous medium, AOT reverse micelles form in a dispersed solution of cholesterol in 1-octanol. Although the size distribution of self-assembled particles is well-known for many different systems, evidence for simultaneous formation of two distinctly sized particles in solution that are chemically different is unprecedented. The ability to form microemulsion solutions that contain coexisting particles may have important applications in drug formulation and administration, particularly as applied to drug delivery using cholesterol as a targeting agent.     

Formation mechanism of conducting polypyrrole nanotubes in reverse micelle systems

Polypyrrole (PPy) nanotubes were readily fabricated through chemical oxidation polymerization in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse (water-in-oil) emulsions. The reverse cylindrical micelle phase was characterized, and the key factors affecting the formation of PPy nanotubes were systematically inspected. AOT reverse cylindrical micelles were prepared via a cooperative interaction between an aqueous FeCl3 solution and AOT in an apolar solvent. In the H2O/FeCl3/AOT/apolar solvent system, the aqueous FeCl3 solution played a role in increasing the ionic strength and decreasing the second critical micelle concentration of AOT. As a result, AOT reverse cylindrical micelles could be spontaneously formed in an apolar solvent. In addition, iron cations were adsorbed to the anionic AOT headgroups that were capable of extracting metal cations from the aqueous core. Under these conditions, the addition of pyrrole monomer resulted in the chemical oxidation polymerization of the corresponding monomer at the surface of AOT reverse cylindrical micelles, followed by the formation of tubular PPy nanostructures. In a typical composition (74.0 wt % hexane, 22.4 wt % AOT, and 3.6 wt % aqueous FeCl3 solution at 15 degrees C), the average diameter of PPy nanotubes was approximately 94 nm and their length was more than 2 mum. The PPy nanotube dimensions were affected by synthetic variables such as the weight ratio of aqueous FeCl3 solution/AOT, type of apolar solvent, and reaction temperature. Moreover, the relationship between the diameter and the conductivity of the nanotubes was investigated.     

Shell-cross-linked cylindrical Polyisoprene-b-polyferrocenylsilane (PI-b-PFS) block copolymer micelles: one-dimensional (1D) organometallic nanocylinders

We report the creation and properties of colloidally stable shell-cross-linked cylindrical organometallic block copolymer micelles with adjustable length and swellability. The one-dimensional (1D) structures with semicrystalline polyferrocenylsilane (PFS) cores and polyisoprene (PI) coronas were initially self-assembled from PI-b-PFS block copolymers in a PI-selective solvent such as hexane. The length of the cylinders could be varied from hundreds of nanometers to several tens of micrometers by adjusting solution conditions, using various solvents such as hexane, decane, or hexane/THF (or toluene) mixtures. The cylindrical micelles with vinyl groups in the PI corona were cross-linked through a Pt(0)-catalyzed hydrosilylation reaction using 1,1,3,3-tetramethyl disiloxane as a cross-linker at room temperature. The shell cross-linking significantly increased the stability of the micelles relative to the un-cross-linked precursors as no fragmentation was observed upon sonication in solution. In addition, the structural integrity of the micelles was also enhanced after solvent removal; a solid sample was successfully microtomed and then examined using TEM, which revealed circular cross-sections for the PI-b-PFS micelles with an average diameter of ca. 15 nm. We also discovered that shell cross-linking is a prerequisite for generating ceramic replicas through the pyrolysis of PI-b-PFS aggregates. Moreover, we were able to pattern the cross-linked micelles on a flat substrate by microfluidic techniques, generating perpendicularly crossed lines of aligned micelles. In short, the shell-cross-linked PI-b-PFS 1D organometallic aggregates are a promising new type of nanomaterial with intriguing potential applications.     

Structural characterization of surfactant aggregates adsorbed in cylindrical silica nanopores

The self-assembly of nonionic surfactants in the cylindrical pores of SBA-15 silica with a pore diameter of 8 nm was studied by small-angle neutron scattering (SANS) at different solvent contrasts. The alkyl ethoxylate surfactants C(10)E(5) and C(12)E(5) exhibit strong aggregative adsorption in the pores as indicated by the sigmoidal shape of the adsorption isotherms. The SANS intensity profiles can be represented by a sum of two terms, one accounting for diffuse scattering from surfactant aggregates in the pores and the other for Bragg scattering from the pore lattice of the silica matrix. The Bragg reflections are analyzed with a form factor model in which the radial density profile of the surfactant in the pore is approximated by a two-step function. Diffuse scattering is represented by a Teubner-Strey-type scattering function which indicates a preferred distance between adsorbed surface aggregates in the pores. Our results suggest that adsorption starts with formation of discrete surface aggregates which increase in number and eventually merge to interconnected patches as the plateau value of the adsorption isotherm is approached. A grossly different behavior, viz. formation of micelles as in solution, is found for the maltoside surfactant C(10)G(2), in agreement with the observed weak adsorption of this surfactant in SBA-15.     

Superlattice formation in binary mixtures of block copolymer micelles

Two distinct diblock copolymers, poly(styrene-b-isoprene) (SI) and poly(styrene-b-dimethylsiloxane) (SD), were codissolved at various concentrations in the polystyrene selective solvent diethyl phthalate. Two SI diblocks, with block molar masses of 12,000-33,000 and 30,000-33,000, and two SD diblocks, with block molar masses of 19,000-6000 and 16,000-9000, were employed. The size ratio of the smaller SD micelles (S) to the larger SI micelles (L) varied from approximately 0.5 to 0.6, based on hydrodynamic radii determined by dynamic light scattering on dilute solutions containing only one polymer component. Due to incompatibility between the polyisoprene and polydimethylsiloxane blocks, a binary mixture of distinct SI and SD micelles was formed in each mixed solution, as confirmed by cryogenic transmission electron microscopy. When the total concentration of polymer was increased to 20-30%, the micelles adopted a superlattice structure. Small angle X-ray scattering revealed the lattice to be the full LS13 superlattice (space group Fm3c) in all cases, with unit cell dimensions in excess of 145 nm. A coexistent face-centered cubic phase composed of SD micelles was also observed when the number ratio of S to L micelles was large.     

Structures of micelles formed by synthetic alkyl glycosides with unsaturated alkyl chains

Three new alkyl glycosides with similar molecular structures (oleyl and oleoyl alkyl chains and various head groups: disaccharide, trisaccharide and disaccharide with an additional amidoethoxy spacer) were synthesized and their supramolecular structure in aqueous solution was investigated. Small angle neutron scattering, surface tension measurement and the contact preparation method were applied to get molecular structure-property relationships. Although the chemical structures differ only in small details, their CMC values, lyotropic phase behaviour, surface area per surfactant molecule in the micelle and at the liquid-air interface, and the size and shape of the micelles are very different. We have found three different types of aggregates: spherical, cylindrical and polymer-like micelles in dilute solutions.     

Spontaneous formation of vesicles and chiral self-assemblies of sodium N-(4-dodecyloxybenzoyl)-L-valinate in water

A novel N-acylamino acid surfactant, sodium N-(4-dodecyloxybenzoyl)-L-valinate (SDLV), has been synthesized. The aggregation behavior of the surfactant in aqueous solution has been studied by surface tension, fluorescence probe, microscopy, and dynamic light scattering (DLS) techniques. The amphiphile has a very low critical aggregation concentration (cac). These studies have suggested formation of large bilayer structures in water. The mean apparent hydrodynamic radius, RH, of the self-assemblies in dilute aqueous solution obtained from DLS measurements confirmed formation of large aggregates. The FT-IR spectra of the amphiphile have indicated strong intermolecular amide hydrogen bonding in the self-assemblies in aqueous solution. The microenvironment of the fluorescence probes is highly nonpolar and viscous in nature. The circular dichroism (CD) spectra of SDLV were recorded in water and in a 1:1 water-methanol mixture. The CD spectra have indicated the presence of chiral aggregates in aqueous solution above the cac. The microstructure of the aggregates has been studied by use of optical and transmission electron microscopy. Both types of micrographs have shown the presence of a variety of morphologies including giant spherical vesicles, tubules, twisted ribbons, and helical strands in aqueous solutions.     

Preparation of nanosize silica in reverse micelles: ethanol produced during TEOS hydrolysis affects the microemulsion structure

Microemulsions have been widely used as microreactors for the synthesis of nanoparticles and mesoporous materials. The correlation between the microstructure of a microemulsion and the features of the obtained materials is the most intriguing problem. On this point, many investigations have their ground on the structure of the precursor microemulsion, i.e., the system before the reaction takes place. Nevertheless, any reactions usually involve the formation of byproducts (aside from the nanoparticles). Several of these byproducts (e.g., ions, amphiphilic molecules) could modify the microemulsion structure during the course of the reaction. Here we examine the hydrolysis of tetraethoxysilane (TEOS) in the water-in-oil microemulsion hexadecyl-trimethylammonium bromide (CTAB)/pentanol/hexane/water. Conductivity and NMR measurements performed during the course of the reaction, in combination with dynamic light scattering and pulsed field gradient spin-echo NMR investigation performed on the microemulsion upon the addition of ethanol, indicate that a byproduct (ethanol) modifies the microreactor structure. The ethanol produced by the TEOS hydrolysis drives the microemulsion structure from small disconnected reverse micelles toward large connected aggregates until (for high enough ethanol loading) the system phase separates into two coexisting liquid phases (a dense interconnected network and a dilute reverse micellar phase).     

Characterization of rodlike aggregates generated from a cationic surfactant and a polymerizable counterion

The polymerization of elongated micellar structures offers a novel approach to the production of high-aspect-ratio, water-soluble amphiphilic nanorods. A cationic surfactant with a vinyl-containing counterion, cetyltrimethylammonium 4-vinylbenzoate, has been synthesized and polymerized to produce high-aspect-ratio nanoparticles which are insensitive to changes in solution conditions. Aggregates are polymerized over a range of initiator concentrations allowing for control of the product length. Small-angle neutron scattering and light scattering are used to characterize the dimensions of the polymerized aggregates, showing them to have a fixed radius of 2 nm and contour lengths varying from 96 to 340 nm. Proton NMR verifies the chemical structure and provides insight into the mobility of the aggregate components. Finally, gel permeation chromatography of the polymer extracted from the aggregates indicates that the polymerization reaction controls the aggregate dimensions.     

Sugar-Ester Nonionic Microemulsion: Structural Characterization

Surfactants containing sugar components and fatty acids satisfy the quality standards for food application. The food grade sugar ester in this study is a commercial sucrose monoester of stearic acid (abbreviated SES), the oil phase consists of a 1:1 mixture of n-tetradecane and l-butanol. The originally planned food grade oil, a medium chain triglyceride, is substituted by tetradecane because tetradecane is available as a fully deuterated product, which is necessary for some structural investigations. The investigated system is solid at room temperature, but liquefies and structures into a homogeneous microemulsion when heated to above 37 degrees C. The structural characterization of such microemulsions is the aim of this work. The established methods for this purpose are scattering methods, such as small-angle scattering of X-rays and neutrons and dynamic light scattering. These scattering techniques can be used to obtain valuable information on the size, shape, and internal structure of colloids and complex fluids. We started our investigation with the pseudobinary system SES, tetradecane and l-butanol, varying the SES content. The scattering results show that the sugar ester form inverse globular micelles in the oil phase. The size of these micelles is about 6 nm. While the size is nearly constant in a wide SES concentration regime (5 up to 40% surfactant), the volume or aggregation number increases significantly with SES. This is explained by an increasing replacement of l-butanol molecules by sugar-ester molecules in the micelles formed. Moreover, it can be shown that these micelles strongly overlap. Their center-to-center distance is about 3.8 nm at 40% SES at a micellar diameter of 6 nm. The micellar overlap leads to a highly reduced diffusion of the micelles as was found with dynamic light scattering. When incorporating water in the micellar core, the micelles swell up to about 10 nm and the shape of the aggregates becomes more and more elongated with higher water content. Copyright 2001 Academic Press.     

Crew‐cut aggregates from self‐assembly of blends of polystyrene‐b‐poly(acrylic acid) block copolymers and homopolystyrene in solution

The formation and morphological characteristics of crew‐cut aggregates from blends of polystyrene‐b‐poly(acrylic acid) diblock copolymer and polystyrene homopolymer in solution were studied by static light scattering, transmission electron microscopy and size exclusion chromatography. The crew‐cut aggregates, consisting of a polystyrene core and a poly(acrylic acid) corona, were prepared by direct dissolution of the polymer blends in a selective solvent mixture consisting of 93 wt % dimethylformamide and 7 wt % water. It is found that the aggregation behavior depends strongly on the relative volume fractions of the block copolymer and homopolymer in the blends. This is a result of the difference in solubility between the copolymer and the homopolymer in solution which, in turn, influences their miscibility and mutual solubility and consequently the morphology of the formed crew‐cut aggregates. Specifically, when the homopolymer fraction is low, it is mainly dissolved in the cores of the crew‐cut aggregates formed by the block copolymer. When the homopolymer fraction exceeds its solubility limit in the copolymer micelles, aggregates of another type are formed which contain a major fraction of the homopolymer. These aggregates are usually much larger than the primary micelles and have an internal structure due to the formation of reverse micelles from the dissolved block copolymer chains. The importance of thermodynamic vs. kinetic aspects during the formation of the crew‐cut aggregates is also discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1469–1484, 1999     

Self-Assembling Behavior of Polyglyceryl-Modified Silicone Surfactant in Aqueous Solution

We report interesting self-assembly behavior of a polyglyceryl-modified silicone surfactant in the aqueous solution; the sample has been characterized through measurements of surface tension, transmission electron microscopy (TEM), dynamic light scattering (DLS), and small-angle x-ray scattering (SAXS). Aqueous solutions of this surfactant had a low critical aggregation concentration (CAC) and surface tension (21.5 mN · m^?1), substantially lower than those reported for polyether-modified silicone surfactants with a similar molecular architecture. DLS and TEM revealed self-assembled spherical micelles with a narrow size distribution. At higher concentrations (10 wt%), linear packing of micelles was observed, while the micelle size distribution remained similar (50–90 nm). SAXS data could be fitted through the use of a core–shell model and implied that the core radius remained roughly 4.3–6.0 nm for all solutions of the surfactant analyzed. The origin of its curious aggregates behavior is attributed to hydrogen bonding, steric effects, and the directionality of bond angle from the polyglyceryl block of this novel class of silicone surfactant. This type of surfactant coupling lipophilic segments assembles the cores of the micelles in water which may find positive factors for potential applications such as microreaction compartmentalization.