环烷酸类载体液膜体系对金属离子传输机理的研究

本文先在大块液膜体系中以环已烷甲酸为载体,通过正交设计,系统地研究了各种因素对希土离子输送作用的影响规律。比较了相同条件下RE~(3+)(希土)同Na~+,NH_4~+、Ca~(2+)和Fe~(3+)等离子的输送作用。发现在适当条件下,无皂化的羧酸载体对RE~(3+)离子具有良好的输送效果,同时证实,羧酸输送RE~(3+)离子是通过三个H~+离子与一个RE~(3+)离子的交换,而当载体皂化时,皂化的载体直接与接收相H~+离子发生交换,从而降低了羧酸对RE~(3+)离子的输送和分离效果。 在大块液膜研究的基础上,建立了一个以无皂化的环烷酸为载体的乳状液膜体系,从模拟离子矿的硫酸铵浸出液中萃取希土,通过正交试验确定了最优的液膜萃取条件,希土萃取率达96％以上,富集度30～40倍。     

Synthesis of ditopic ligands for the selective extraction of copper(II) nitrate and crystal structures of their Cu(II) complexes

We have synthesized two ditopic ligands for selective extraction of copper(II) nitrate. We also synthesized one cation-only binding analog for comparison. All three ligands were characterized by conventional techniques. Competitive two-phase metal ion solvent extraction experiments were performed at 25 °C over a period of 24 h. These ligands showed significant selectivity for Cu(II) ions, having the ditopic ligands extract 81 and 73% of the Cu(II) ions in a solution of different metal ions {Ni(II), Co(II), Cu(II), Zn(II), Cd(II), Pb(II)} at pH 5.09. Competitive transport experiments (water/chloroform/water) were undertaken employing each ligand separately as the ionophore in the membrane (chloroform) phase. No metal ion transport was observed, but a large concentration of Cu(II) was present in the membrane phase. Competitive anion extraction and transport were carried out with the ditopic ligands, yielding selective extraction and transport of nitrate. Furthermore, a pH isotherm of the best ditopic ligand (H₂L²) with Cu(II) was determined from pH 1.0 to 6.0, producing a pH_½ value of approximately 2.6. Finally, crystal structures of the ditopic ligands complexed with Cu(II) were determined and refined. The coordination geometry around the metal centers are distorted square planar and the Cu(II)-donor bond lengths fall within the normal range.     

Selective transport of copper(II) ions across a liquid membrane mediated by Piroxicam

Piroxicam was found to be a highly selective carrier for uphill transport of Cu²⁺ ions through a chloroform liquid membrane. The transport occurs via a counterflow of protons from the receiving phase to the source phase. The effects of several parameters on the transport of Cu²⁺ ions, such as the carrier concentration, pH of the source phase, composition of the receiving phase, and duration are described. A high transport efficiency (98±2%) was provided by the carrier for Cu²⁺ ions in a receiving phase of 0.01 mol l⁻¹ sulfuric acid after 4 h. Different metal ion transport experiments showed that Cu²⁺ ions were selectively transported over other ions, such as Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, UO₂²⁺ and ZrO₂²⁺. In the presence of fluoride ions (used as a suitable masking agent in the source phase), the interfering effects of UO₂²⁺ and ZrO₂²⁺ ions were eliminated. The applicability of the method was tested on a real sample, and the results obtained show that it is potentially useful for solvent extraction of copper.     

Nickel(II) Ion-Selective Electrode Based on 2,5-Thiophenyl bis(5-tert-Butyl-1,3-Benzoxazole

ABSTRACT

A PVC membrane sensor for Nickel (II) ions based on 2,5-thiophenyl bis(5-tert-butyl-1,3-benzoxazole) as membrane carrier was prepared. The sensor exhibits a Nernstian response for Ni²⁺ ions over a wide concentration range (10^?2–10^?5M). It has a relatively fast response time and can be used for at least 2 months without any considerable divergence in potentials. The nature of the plasticizer, the additive, the concentration of internal solutions in the electrodes and the composition of the membrane were investigated. The proposed membrane electrode revealed very good selectivities for Ni²⁺ over a wide variety of other metal cations and could be used in pH range of 4.0–8.0. It was successfully applied for the direct determination of Ni²⁺ in solution and as an indicator electrode in potentiometric titration of nickel ion in both water and 85% acetonitrile solutions.     

Selective transport of zinc and copper ions by synthetic ionophores using liquid membrane technology

This work highlights the role of synthetic carrier (ionophore) in the separation of heavy metal ions. A new series of ionophores; 4,4′-nitrophenyl-azo-O,O′-phenyl-3,6,9-trioxaundecane-1,10-dioate (R₁), bis[4,4′nitro-phenylazo-naphthyl-(2,2-dioxydiethylether)] (R₂) 1,8-bis-(2-naphthyloxy)-3,6-dioxaoctane (R₃), 1,11-bis-(2-naphthyloxy)-3,6,9-trioxaunde-cane (R₄), 1,5-bis-(2-naphthyloxy)-3-oxa-pentane (R₅) have been synthesized and used as extractant as well as carrier for the transport of various metal ions (Na⁺, K⁺, Mg²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) through liquid membranes. Effect of various parameters such as metal ion concentration, ionophore concentration, liquid–liquid extraction, back extraction, comparison of transport efficiency of BLM and SLM and different membrane support (hen’s egg shell and PTFE) have been studied. In BLM ionophores (R₂–R₅) transport Zn⁺ at greater extent and the observed trend for the transport of Zn²⁺ is R₂?>?R₄?>?R₃?>?R₅ respectively. Further transport efficiency is increased in SLM. In egg shell membrane ionophores (R₂–R₅) transport Zn⁺ due to their non-cyclic structure and pseudo cavity formation while ionophore R₁ transports Cu²⁺ ions at greater extent due to its cyclic structure and cavity size. Among the membrane support used egg shell membrane is found best for the transport of zinc ions because of its hydrophobic nature and exhibits electrostatic interactions between positively charged zinc ions and –COOH group of egg shell membrane. Thus structure of ionophores, hydrophobicity and porosity of the membrane support plays important role in separation of metal ions.     

Properties and Applications of Cryptand‐22 Surfactant for Ion Transport and Ion Extraction

A non‐ionic cryptand‐22 surfactant consisting of a macrocyclic cryptand‐22 polar head and a long paraffinic chain (C₁₀H₂₁‐Cryptand‐22) was synthesized and characterized. The critical micellar concentration (CMC) of the cryptand surfactant in ROH/H₂O mixed solvent was determined by the pyrene fluorescence probe method. In general, the cmc of the cryptand surfactant increased upon decreasing the polarity of the surfactant solution. The cryptand surfactant also can behave as a pseudo cationic surfactant by protonation of cryptand‐22 or complexation with metal ions. Effects of protonation and metal ions on the cmc of the cryptand surfactant were investigated. A preliminary application of the cryptand surfactant as an ion‐transport carrier for metal ions, e.g., Li⁺, Na⁺, K⁺ and Sr²⁺, through an organic liquid‐membrane was studied. The transport ability of the cryptand surfactant for these metal ions was in the order: K⁺ ≥ Na⁺ < Li⁺ < Sr²⁺. A comparison of the ion‐transport ability of the cryptand surfactant with other macrocyclic polyethers, e.g., dibenzo‐18‐crown‐6, 18‐crown‐6 and benzo‐15‐crown‐5, was studied and discussed. Among these macrocyclic polyethers, the cryptand surfactant was the best ion‐transport carrier for Na⁺, Li⁺ and Sr²⁺ ions. Furthermore, a foam extraction system using the cryptand surfactant to extract the cupric ion was also investigated.     

A Novel Al(III)‐Selective Electrochemical Sensor Based on N,N′‐Bis(salicylidene)‐1,2‐phenylenediamine Complexes

A polyvinylchloride membrane sensor based on N,N′‐bis(salecylidene)‐1,2‐phenylenediamine (salophen) as membrane carrier was prepared and investigated as a Al³⁺‐selective electrode. The sensor exhibits a Nernstian response toward Al(III) over a wide concentration range (8.0×10^?7–3.0×10^?2 M), with a detection limit of 6.0×10^?7 M. The potentiometric response of the sensor is independent of the pH of the test solution in the pH range 3.2–4.5. The electrode possesses advantages of very fast response and high selectivity for Al³⁺ in comparison with alkali, alkaline earth and some heavy metal ions. The sensor was used as an indicator electrode, in the potentiometric titration of aluminum ion and in determination of Al³⁺ contents in drug, water and waste water samples.     

Proton-ionizable crown compounds. 12. Proton-Coupled selective membrane transport of Li+ using a proton-ionizable pyridono macrocycle

The macrocycle-mediated fluxes of several alkali metal cations have been determined in a H₂O-CH₂Cl₂-H₂O liquid membrane system. Water-insoluble proton-ionizable macrocycles of the pyridono type were used. The proton-ionizable feature allows the coupling of cation transport to reverse H⁺ transport. This feature offers promise for the effective separation and/or concentration of alkali metal ions with the metal transport being driven by a pH gradient. A counter anion in the source phase is not co-transported. The desired separation of a particular metal ion involves its selective complexation with the macrocycle, subsequent extraction from the aqueous phase to the organic phase, and exchange for H⁺ at the organic phase-receiving phase interface. Factors affecting transport which were studied include ring size, source phase pH, and receiving phase pH. Lithium was transported at a rate higher than that of the other alkali metals in both single and competitive systems using a 15-crown-5 pyridono carrier.     

Heavy-metal extraction capability of chalcogenoic aminophosphines derived from 1-amino-4-methylpiperazine

Aminophosphine of the type (Ph₂PNHR) derived from 1-amino-4-methylpiperazine and its chalcogen derivatives (Ph₂P(X)NHR X = S, Se) were used as ligands in solvent extraction of metal picrates such as Cu²⁺, Ni²⁺, and Pb²⁺ from the aqueous to the organic phase. Influence of parameters such as pH of the aqueous phase, ligand concentration in the organic phase, and concentration of the extractant extracted from the aqueous to the organic phase was investigated to determine the ligands’ ability to extract metal ions. Metal picrate extraction was investigated at 25°C using UV-VIS spectrophotometry in dichloromethane in the absence and in the presence of Ph₂PNHR and chalcogenides. The extraction results revealed that the extraction percentage of Cu²⁺, Ni²⁺, and Pb²⁺ metals was much higher at lower pH values, indicating an acidity dependent complexation equilibrium.     

Membrane Transport of Pb(II) with a Cooperative Carrier Composed of Dibenzyldiaza‐18‐Crown‐6 and Palmitic Acid

A chloroform membrane system containing a given mixture of dibenzyldiaza‐18‐crown‐6 and palmetic acid was applied for transport of Pb²⁺ ions. The transport was capable of moving metal ions “uphill”. Thus, it was possible to follow the transfer of Pb(II) from the aqueous source phase to the organic layer and from the organic layer to the receiving phase. The effects of thiosulfate concentration in the receiving phase, palmetic acid and dibenzyldiaza‐18‐crown‐6 concentration in the organic phase on the efficiency of the transport system were examined. By using S₂O₃^2? ion as metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is 96 ± 1.5%. The selectivity and efficiency of lead transport from aqueous solution containing Cu²⁺, Tl⁺, Ag⁺, Co²⁺, Ni²⁺, Mg²⁺, Zn²⁺, Hg²⁺, Cd²⁺, Ca²⁺ were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of Ag⁺ and Cu²⁺ were diminished drastically.     

Preconcentration and Determination of Trace Amounts of Heavy Metals in Water Samples Using Membrane Disk and Flame Atomic Absorption Spectrometry

A fast and simple method for preconcentration of Ni^2＋, Cd^2＋, Pb^2＋, Zn^2＋, Cu^2＋ and Co^2＋ from natural water samples was developed. The metal ions were complexed with sodium diethyldithiocarbamate （Na-DDTC）, then adsorbed onto octadecyl silica membrane disk, recovered and determined by FAAS. Extraction efficiency, influence of sample volume and eluent flow rates, effects of pH, amount of Na-DDTC, nature and amount of eluent for elution of metal ions from membrane disk, break through volume and limit of detection have been evaluated. The effect of foreign ions on the percent recovery of heavy metal ions has also been studied. The limit of detection of the proposed method for Ni^2＋, Cd^2＋, Pb^2＋, Zn^2＋, Cu^2＋ and Co^2＋was found to be 2.03, 0.47, 3.13, 0.44, 1.24 and 2.05 ng·mL^-1, respectively. The proposed （DDTC） method has been successfully applied to the recovery and determination of heavy metal ions in different water samples.     

Trace enrichment of metal ions in aquatic environments by Saccharomyces cerevisiae

Sorption properties of baker’s yeast cells, characterised as Saccharomyces cerevisiae were evaluated for trace enrichment of metal ions: Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Pb²⁺ and Zn²⁺ from aqueous environments. Metal concentration was determined by flame atomic absorption spectrometry (FAAS). Parameters affecting metal uptake such as solution pH, incubation time, amount of yeast biomass and effect of glucose concentration (energy source) were optimised. Further studies were carried out to evaluate the effects on metal uptake after treating yeast with glucose as well as with an organic solvent. The results showed that trace enrichment of the metals under study with yeast, depends upon the amount of yeast biomass, pH and incubation time. Treatment of yeast cells with 10-20 mM glucose concentration enhanced metal uptake with exception to Cr⁶⁺, whose metal enrichment capacity decreased at glucose concentration of 60 mM. Of the investigated organic solvents THF and DMSO showed the highest and lowest capacity, respectively, to enhance metal uptake by yeast cells. Trace enrichment of metal ions from stream water, dam water, treated wastewater from a sewage plant and wastewater from an electroplating plant achieved enrichment factors (EF) varying from 1 to 98, without pre-treatment of the sample. pH adjustment further enhanced the EF for all samples. The results from these studies demonstrate that yeast is a viable trace metal enrichment media that can be used freely suspended in solution to achieve very high EF in aquatic environments.     

Liquid Membrane Transport of Heavier Rare Earth Metal Ions Based on CPC Results with Di(2-Ethylhexyl) Phosphoric Acid

Abstract

The behaviors of heavier rare earth metal ions in bulk liquid membrane transport systems were examined for Gd³⁺, Tb³⁺, Dy³, Ho³⁺, Er³⁺, Tm³, Yb³⁺ and Lu³⁺ ions. The liquid membrane transport system was constructed by aq. HCl/CHCl₃ containing Di (2-ethylhexyl) phosphoric acid/aq. HCl. The optimum concentration of HCl in the aqueous phase with respect to the rate of transport for these ions increased with the atomic number of the rare earth elements. This trend of transport behaviors was on the same line observed for lighter rare earth ions in the preceding work. Difference in the rate of transport can be used for selective liquid membrane transport of several sets of combination with these ions.     

Lead ion selective PVC membrane electrode based on 5,5'-dithiobis-(2-nitrobenzoic acid)

A PVC membrane electrode for lead ions based on 5,5′-dithiobis-(2-nitrobenzoic acid) as membrane carrier was prepared. The electrode exhibits a Nernstian response for Pb²⁺ over a wide concentration range (1.0×10⁻²–4.0×10⁻⁶ M). It has a relatively fast response time and can be used for at least 3 months without any divergence in potentials. The proposed electrode revealed good selectivities for Pb²⁺ over a wide variety of other metal ions and could be used in a pH range of 2.0–7.0. It was used as an indicator electrode in potentiometric titration of lead ions and in direct determination of lead in water samples.     

Ion-imprinted interpenetrating network gels for solid-phase extraction of heavy metal ions

In the present work, ion-imprinted interpenetrating polymer network (IPN) gels were prepared by free radical/cationic hybrid polymerisation of acrylamide (AAm) and 1,4-butanediol vinyl ether (BVE). These gels were respectively used for separation of Cu²⁺, Ni²⁺ and Zn²⁺ ions in natural water samples. Experimental conditions for effective adsorption of metal ions were optimised with respect to different experimental parameters by column procedures in detail. The optimum pH value for the adsorption of Cu²⁺, Ni²⁺ and Zn²⁺ ions on these sorbents was 6.0. Complete elution of the adsorbed metal ions from the sorbent was carried out using 1.0 mol/L of HCl solution. The optimum sample flow rate and eluent flow rate were, respectively, 1.0 and 0.3 mL/min. Common coexisting ions did not interfere with the separation and determination of the target ions. The accuracy of the proposed method was validated by analysis of the standard reference material (GBW 08301, river sediment). The measured contents of metal ions in the reference material were in good agreement with the certified values. The presented method was successfully applied for the determination of Cu²⁺, Ni²⁺ and Zn²⁺ ions in three different water samples (well water, seawater and waste water).     

Solid phase extraction of trace metals in water and leafy vegetables using a resin functionalized with potassium 2-benzoylhydrazinecarbodithioate and determination by ICP–AES

A solid phase extraction method for the determination of Cu(II), Mn(II) and Zn(II) metal ions in natural water and leafy vegetable samples by ICP-AES was developed. The method was based on the sorption of metal ions onto Amberlite XAD-16 functionalized with a new chelating ligand potassium 2-benzoylhydrazinecarbodithioate (Amberlite XAD-16-PBHCD) and elution with nitric acid. The optimum experimental conditions for the quantitative sorption of the three metal ions, namely, effect of pH, sample volume, flow rate, concentration of eluent, sorption capacity, kinetics of sorption, and the effect of diverse ions on the sorption of analytes have been investigated. All the metal ions were quantitatively retained by the functionalized resin at pH 5.0 and sorbed metals could be eluted with 2.0?M HNO₃. The detection limits were 5.6, 4.5 and 1.8?µg?L^?1 for Cu(II), Mn(II) and Zn(II), respectively. The developed method was applied for the determination of Cu(II), Mn(II) and Zn(II) in water and leafy vegetable samples.     

Selective removal of heavy metal ions using sol-gel immobilized and SPE-coated thiacrown ethers

Sorbent materials based on three thiacrown ethers, 1,4,7,10-tetrathiacyclododecane (12S4), 1,4,7,10,13-pentathiacyclopentadecane (15S5) and 1,4,7,10.13,16-hexathiacyclooctadecane (18S6) were prepared either by immobilizing the ligands into sol-gel (SG) matrix or coating on commercial solid phase extraction (SPE) column. SG sorbents were characterized by FT-IR, energy dispersive X-ray microanalysis (EDX) and thermogravimetric analysis/derivative thermogravimetric analysis (TGA/DTG). A marked thermal stability of the ligands when immobilized in sol-gel matrix was noted. The competitive sorption characteristics of a mixture of eleven metal ions (Mg²⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Ca²⁺, Cu²⁺, Ni²⁺, Ag⁺, V⁴⁺, Hg²⁺) using: (i) batch method with ligands trapped in SG matrices, and (ii) off-line SPE column containing coated ligands were studied using ICP-MS. The extraction of metals were optimized for key parameters such as pH, contact time/flow rate, particle size (for SG sorbents) and ligand concentration. Under the optimized conditions, all the immobilized thiacrown ethers exhibited highest selectivity toward Ag⁺, with lesser responses to Hg²⁺ while the extraction of other metal ions were negligible. Among the SG sorbents, 18S6-SG offer the highest capacity and the best selectivity over Hg²⁺. However, for practical applications such as for selective isolation and preconcentration of Ag⁺, the SPE type especially based on 18S6 is preferred as analysis time and recoveries are favorable. The sorbents can be repeatedly used three times as there was no significant deterioration in the metal uptake (%E > 90%) or interference from other metal ions. The optimized procedures were successfully applied for the separation and preconcentration of traces Ag⁺ in different water samples.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

Specific Uphill Transport of Zinc as Zn(SCN)42− Ion using Na+-Dicyclohexyl-18-Crown-6 as Carrier

Sodium-dicyclohexyl- 18-crown-6 complex cation was used as carrier for the uphill transport of zinc as Zn(SCN)₄^2? complex anion. By using L-cysteine as a metal ion acceptor in the receiving phase at the optimized pH of 7.6, the amount of zinc transport through the liquid membrane after 90 min was 97.2 ± 1.0%. The selectivity and efficiency of zinc transport from aqueous solutions containing equimolar mixtures of Ag⁺, Cd²⁺ Co²⁺, Cu²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Pd²⁺, Sr²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ ions was investigated. In the presence of NH₂OH.HCl as a suitable masking agent in the source phase, the interfering effect of Cu²⁺ and Pb²⁺ ions was diminished drastically.     

中空纤维分散液膜富集稀土元素

采用2-乙基己基膦酸单-2-乙基己基酯(HEHEHP)-正庚烷为萃取剂,盐酸为反萃取剂,中空纤维膜作支撑膜,研究中空纤维分散液膜技术富集稀土镱(Yb~(3+))离子。考察了体系物性:反萃分散相中反萃剂浓度、萃取剂浓度、萃取剂与反萃剂体积比、料液相p H值、稀土离子浓度;流体流动状态:反萃分散相与料液相流速变化等因素对富集稀土离子的影响。中空纤维分散液膜富集Yb~(3+)的最佳条件为:萃取剂浓度为0.25 mol/L,反萃取剂HCl浓度为4.00 mol/L,萃取剂与反萃剂体积比为10∶40,料液相p H=2.80,稀土离子浓度为0.025 mol/L。反萃分散相体积流量和料液相体积流量较小时,萃取率随流量的增加呈现逐渐增大的趋势。若两相体积流量过大,反萃过程进行不完全,萃取率反而下降。研究结果表明,中空纤维分散液膜技术可实现稀土离子的有效富集。