Oxalic acid removal from wastewater using multi-walled carbon nanotubes: Kinetic and equilibrium analysis

Oxalic acid adsorption from aqueous solution is studied in this work. Multi-walled carbon nanotubes (MWCNT) were used as an adsorbent. The investigated adsorption variables are equilibrium time, initial acid concentration, and temperature. The experimental results were presented using equilibrium isotherm and kinetic models. The used equilibrium models are Langmuir, Freundlich, and Temkin adsorption isotherms. And the kinetic models are Elovich, Lagergren pseudo-first-order and pseudo-second-order kinetic models. The thermodynamics studies were carried out at three different temperatures: 278, 298, and 318 K. Langmuir isotherm was the best fitted equilibrium model for the experimental data. The all applied kinetic models fitted the data suitably.     

Kinetics and adsorption equilibrium in the system aqueous solution of copper ions—granulated activated carbon

The feasibility of using granulated activated carbon for adsorption removal of copper from aqueous solution was studied. The influence of pH, amount of the adsorbent, contact time, and copper concentration on adsorption of copper was investigated. The single-component equilibrium data on copper adsorption were analyzed using the Langmuir, Freundlich, Redlich—Peterson, Temkin, and Toth adsorption isotherms. The adsorption process was followed by two simplified kinetic models including pseudo-first- and pseudo-second-order equations. Kinetic parameters, rate constants, equilibrium sorption capacities, and the corresponding correlation coefficients were calculated and examined for each kinetic model. It was shown that copper adsorption can be described by the pseudo-second-order equation.     

介孔碳CMK-3对苯酚的吸附动力学和热力学研究

研究了介孔碳CMK-3对苯酚的吸附性能, 与传统商用活性碳(CAC)进行了比较, 结果表明, CMK-3比CAC的吸附量大、吸附速率快、达到平衡时间短, 是一种较好的吸附剂. 同时探讨了介孔碳CMK-3对苯酚的吸附热力学和动力学特征. CMK-3对苯酚的吸附行为可用Langmuir和Freundlich等温式进行描述, 相关性都较好, 但更符合Freundlich经验公式. 分别采用模拟一阶反应和二阶反应模型考察了吸附动力学, 并计算了这些动力学模型的速率常数. 模拟二级反应模型和实验数据之间有较好的相关性. 分别计算了热力学参数ΔG0, ΔS0和ΔH0, 结果表明, CMK-3对苯酚的吸附过程是吸热和自发的.     

Nonlinear Analysis of the Kinetics and Equilibrium for Adsorptive Removal of Cd(II) by Starch Phosphate

In the present study, the nonlinear analysis method was used to evaluate the kinetics and equilibrium for Cd(II) adsorption on crosslinked starch phosphate (SP) from aqueous solution. The pseudo-first-order, pseudo-second-order and Elovich kinetic models were applied to test the kinetics experimental data, and the pseudo-first-order kinetic model provides a best correlation of the experimental data. Adsorption equilibrium data were fit by Langmuir, Freundlich, Dubinin-Radushkevich, and Sips isotherms. The results show that the data are best described by the Sips isotherms with a maximum adsorption capacity of 2.00 mmol/g. The effects of initial pH, and SP dose on the Cd(II) adsorption were also investigated. The adsorption capacities of Cd(II) on SP increase with the pH increasing from 2.0 to 8.0.     

Adsorption kinetics at the solid/solution interface: statistical rate theory at initial times of adsorption and close to equilibrium

The kinetics of solute adsorption at the solid/solution interface has been studied by statistical rate theory (SRT) at two limiting conditions, one at initial times of adsorption and the other close to equilibrium. A new kinetic equation has been derived for initial times of adsorption on the basis of SRT. For the first time a theoretical interpretation based on SRT has been provided for the modified pseudo-first-order (MPFO) kinetic equation which was proposed empirically by Yang and Al-Duri. It has been shown that the MPFO kinetic equation can be derived from the SRT equation when the system is close to equilibrium. On the basis of numerically generated points ( t, q) by the SRT equation, it has been shown that we can apply the new equation for initial times of adsorption in a larger time range in comparison to the previous q vs radical t linear equation. Also by numerical analysis of the generated kinetic data points, it is shown that application of the MPFO equation for modeling of whole kinetic data causes a large error for the data at initial times of adsorption. The results of numerical analysis are in perfect agreement with our theoretical derivation of the MPFO kinetic equation from the SRT equation. Finally, the results of the present theoretical study were confirmed by analysis of an experimental system.     

Physico-chemical characteristics and lead biosorption properties of Enteromorpha prolifera

Biosorption of lead ions onto Enteromorpha prolifera has been investigated. The physico-chemical properties of the biosorbent were characterized by thermal stability, zeta potential, and Boehm titration methods. Batch adsorption experiments were carried out to examine the effect of various parameters such as initial pH, particle size, adsorbent dosage, ionic strength, time, and temperature on biosorption. The kinetic studies showed that the adsorption process was very fast and equilibrium was reached after about 60 min of contact. The pseudo-first-order Lagergren equation, pseudo second-order rate equation, and second-order rate equation were used to describe the kinetic adsorption process. Thermodynamic parameters were determined at three different temperatures. The negative values of free energy change indicated the spontaneous nature of adsorption process.     

Kinetics and equilibrium parameters of Hg(II) adsorption on silica-dithizone

Sílica-dithizone (Sil-dtz) was synthesized and used to adsorb Hg(II) in solution at pH 6.0. Increasing the temperature accelerates the mass transfer of Hg(II) to the silica surface. The kinetic data were evaluated using the traditional pseudo-first-order Lagergren equation and an alternative Avrami kinetic equation. From the latter equation, two regions presenting distinct kinetic parameters were found, at 25 and 35 degrees C, and the use of the parameter n was also related to the determination of distinct kinetic orders. Variations of the adsorption kinetic rate in relation to the time and the temperature were also calculated and are discussed. The adsorption isotherms data were well fitted to the Freundlich model. Interestingly, good adsorption data correlation of the Langmuir model and experimental values was observed only at 45 and 50 degrees C, suggesting, for this temperature range, the formation of complexes with the proportion Hg:dithizone 1:1 on the silica surface.     

PREPARATION AND CHARACTERIZATION OF NOVEL CHITOSAN DERIVATIVES:ADSORPTION EQUILIBRIUM OF IRON(Ⅲ)ION

The adsorption of Fe(Ⅲ)ions from aqueous solution by chitosan alpha-ketoglutaric acid(KCTS)and hydroxamated chitosan alpha-ketoglutaric acid(HKCTS)was studied in a batch adsorption system.Experiments were carried out as function of pH,temperature,agitation rate and concentration of Fe(Ⅲ)ions.The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and isotherm constants were determined.The Langmuir model agrees very well with experimental data.The pseudo-first-order and second-order kinetic models were used to describe the kinetic data and the rate constants were evaluated.The dynamical data fit well with the second-order kinetic model.The pseudo second-order kinetic model was indicated with the activation energy of 19.61 and 7.98 KJ/mol for KCTS and HKCTS,respectively.It is suggested that the overall rate of Fe(Ⅲ)adsorption is likely to be controlled by the chemical process.Results also showed that novel chitosan derivatives(KCTS and HKCTS)were favorable adsorbents.     

Adsorption of acid dyes from aqueous solutions onto acid-activated bentonite

The adsorption of two dyes, namely, Acid Red 57 (AR57) and Acid Blue 294 (AB294), onto acid-activated bentonite in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. Acidic pH was favorable for the adsorption of these dyes. The surface characterization of acid-activated bentonite was performed using the FTIR technique. The pseudo-first-order and pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated. The dynamic data fitted the pseudo-second-order kinetic model well and also followed the intraparticle diffusion model up to 90 min, but diffusion is not the only rate controlling step. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The Freundlich model agrees very well with experimental data. The activation energies of adsorption were also evaluated for the adsorption of AR57 and AB294 onto activated bentonite.     

Removal of malachite green from dye wastewater using mesoporous carbon adsorbent

Mesoporous carbon was synthesized for the removal of a cationic dye malachite green (MG) from aqueous solution. The studies were carried out under various experimental conditions such as contact time, dye concentration, adsorption dose and pH to assess the potentiality of mesoporous carbon for the removal of malachite green dye from wastewater. The sorption equilibrium was reached within 30 min. In order to determine the adsorption capacity, the sorption data were analyzed using linear form of Langmuir and Freundlich equation. Langmuir equation showed higher conformity than Freundlich equation. More than 99% removal of MG was reached at the optimum pH value of 8.5. From kinetic experiments, it was concluded that the sorption process followed the pseudo-first-order kinetic model. This study showed that mesoporous carbon can be recommended as an excellent adsorbent at high pH values.     

Equilibrium and kinetics studies of Cu(II) ions adsorption on polyamidoamine dendrimer starch

A polyamidoamine dendrimer starch (PSt) was prepared with epichlorohydrin as cross-linking agent and characterized by FTIR and scanning electron microscopy. The adsorption behavior of PSt for Cu(II) ions was then studied. Effects of adsorption time, initial concentration of Cu(II) ions, and temperature on the adsorption of Cu(II) ions by PSt were researched, and the equilibrium, kinetics and thermodynamics of the adsorption process were further investigated. The results showed that PSt can effectively adsorb Cu(II) ions from the solution. The adsorption process can be well described by Langmuir isotherm and Freundlich isotherm, and the maximum adsorption capacities of G1PSt, G2PSt, and G4PSt were 3.0571, 3.4228, and 3.9527 mmol/g, respectively. The adsorption of Cu(II) ions on PSt was endothermic in nature. In addition, the pseudo-first-order and pseudo-second-order kinetic models were applied to test the experimental data. The pseudo-second-order kinetic model provided a better correlation of the experimental data in comparison with the pseudo-first-order model.     

Empirical Multicomponent Equilibrium and Film-Pore Model for the Sorption of Copper,Cadmium and Zinc onto Bone Char

The adsorption of three metal ions onto bone char has been studied in both equilibrium and kinetic systems. An empirical Langmuir-type equation has been proposed to correlate the experimental equilibrium data for multicomponent systems. The sorption equilibrium of three metal ions, namely, cadmium (II) ion, zinc (II) ion and copper (II) ion in the three binary and one ternary systems is well correlated by the Langmuir-type equation. For the batch kinetic studies, a multicomponent film-pore diffusion model was developed by incorporating this empirical Langmuir-type equation into a single component film-pore diffusion model and was used to correlate the multicomponent batch kinetic data. The multicomponent film-pore diffusion model shows some deviation from the experimental data for the sorption of cadmium ions in Cd-Cu, Cd-Zn and Cd-Cu-Zn systems. However, overall this model gives a good correlation of the experimental data for three binary and one ternary systems.     

Contribution of concentration-dependent surface diffusion in ternary adsorption kinetics of ethane, propane and n-butane in activated carbon

The role of concentration-dependent surface diffusion in the adsorption kinetics of a multicomponent system is investigated in this paper. Ethane, propane and n-butane are selected as the model adsorbates and Ajax activated carbon as the model adsorbent. Adsorption equilibrium isotherm and dynamic parameters extracted from single-component systems are used to predict the ternary adsorption equilibria and kinetics. The effect of concentration-dependent surface diffusion on the adsorption kinetics predictions is studied by comparing the results of two mathematical models with the experimental data. Three diffusion mechanisms, macropore, surface and micropore diffusions are incorporated in both models. The distinction between these two models is the use of the chemical potential gradient as the driving force for the diffusion of the adsorbed species in one model and the concentration gradient in the other. It was found that the model using the chemical potential gradient provides a better prediction of the ternary adsorption kinetics data, suggesting the importance of the concentration dependency of the surface diffusion, which is implicitly reflected in the chemical potential gradient. The kinetic model predictions are also affected by the way how single-component adsorption equilibrium isotherm data are fitted.     

Adsorption of Brilliant Yellow onto Sepiolite: Evaluation of Thermodynamics and Kinetics and the Application of Nonlinear Isotherm Models

We studied the adsorption of Brilliant Yellow (BY) from aqueous solutions onto sepiolite and determined the adsorption equilibrium isotherms. We applied pseudo-first-order and pseudo-second-order kinetic models; the adsorption of BY onto sepiolite was best described by the pseudo-second-order kinetic model. The experimental data obtained at different temperatures were analyzed using various isotherm models; the Koble–Corrigan isotherm model provided the best fits for the BY adsorption data at all temperatures. The thermodynamic parameters of the BY adsorption onto sepiolite indicated that the adsorption process is spontaneous and exothermic in nature.     

Sorption of levulinic acid onto weakly basic anion exchangers: equilibrium and kinetic studies

The equilibrium and dynamics of levulinic acid sorption on two weakly basic anion exchangers, in free base form, in single-component aqueous solutions were investigated. Adsorption isotherms such as Langmuir, Sips, Radke-Prausnitz, and Toth were applied to correlate the experimental data in the temperature range 285-315 K. Modeling results showed that the Toth model is the best one to correlate the sorption isotherms. The resulting Toth equations were used with the Clausius-Clapeyron equation to determine the isosteric heat of sorption. The sorption kinetics was experimentally measured via a completely stirred finite-bath batch experiment under different initial concentrations and at varying solution temperatures. The pseudo-second-order kinetic model and the Elovich equation were used to represent the kinetic data and the equation parameter values were also evaluated. The pseudo-second-order equation cannot simulate the experimental kinetic data, while the Elovich equation fitted the sorption dynamic data very well under all the operating conditions studied. Finally, the apparent activation energy of sorption was also determined.     

Adsorption of humic acid from aqueous solutions on crosslinked chitosan-epichlorohydrin beads: kinetics and isotherm studies

The adsorption of humic acid on crosslinked chitosan-epichlorohydrin (chitosan-ECH) beads was investigated. Chitosan-ECH beads were characterized by Fourier transform infrared spectroscopy (FTIR), surface area and pore size analyses, and scanning electron microscopy (SEM). Batch adsorption experiments were carried out and optimum humic acid adsorption on chitosan-ECH beads occurred at pH 6.0, agitation rate of 300 rpm and contact time of 50 min. Adsorption equilibrium isotherms were analyzed by Langmuir and Freundlich models. Freundlich model was found to show the best fit for experimental data while the maximum adsorption capacity determined from Langmuir model was 44.84 mg g(-1). The adsorption of humic acid on chitosan-ECH beads was best described with pseudo-first-order kinetic model. For desorption study, more than 60% of humic acid could be desorbed from the adsorbent using 1.0M HCl for 180 min.     

On the Adsorption of Some Catechol Derivatives from Aqueous Solutions onto Activated Carbon Cloth: Equilibrium and Kinetic Studies

The removal of some of pollutants including catechol, 3-methylcatechol, 3-methoxycatechol, and 2,3-dihydroxybenzoic acid by adsorption onto activated carbon cloth (ACC) at 35.0 ± 0.1°C was investigated. The equilibrium experimental data were fitted to Langmuir, Freundlich, Temkin, Langmuir-Freundlich, and Redlich-Peterson isotherms. Also the kinetic experimental data were fitted to the pseudo-first-order and pseudo-second-order kinetic models. It was found that the pseudo-second-order model describes the kinetic of adsorption better than the other one. By comparing the obtained results with the previously reported data, it can be concluded that ACC is a high efficient adsorbent for removal of phenolic compounds from aqueous solutions.     

Watermelon Rind: Agro-waste or Superior Biosorbent?

Biosorption of copper (Cu), zinc (Zn), and lead (Pb) on watermelon rind in a well-stirred batch system was investigated. pH showed significant influence on the biosorption process. Optimal pH for Cu, Zn, and Pb biosorption was found to be 5.0, 6.8 and 6.8, respectively. Watermelon rind was in favor of Pb and it could remove up to 99% Pb between pH ranges of 5 and 6.8 when Pb concentration is lower than 100 mg/L. The biosorptive capacity of watermelon on Cu, Zn, and Pb was 6.281, 6.845, and 98.063 mg/g, respectively. The equilibrium data fitted well to Langmuir adsorption isotherm while pseudo-second-order kinetic model exhibited more advantages for describing kinetic data than pseudo-first-order kinetic model. NaOH was found to be a suitable eluent. After desorption in NaOH solution, the resorption efficiency reached as high as 99% of these three metals either in a single-component or multi-component system. From the characterization study, ion exchange and micro-precipitation were estimated to be the main mechanisms. Due to its high metal uptake capacity, reusability, and metal recovery, watermelon rind can be considered as an eco-friendly and economic biosorbent for removing Pb from water and wastewater.     

Low-temperature synthesis of nanoparticle-assembled, transparent, and low-crystallized hydroxyapatite blocks

The mesoporous carbon CMK-3 adsorbent was prepared, characterized, and used for the removal of anionic methyl orange dye from aqueous solution. Adsorption experiments were carried out as batch studies at different contact time, pH, initial dye concentration, and salt concentration. The dye adsorption equilibrium was rapidly attained after 60 min of contact time. Removal of dye in acidic solutions was better than in basic solutions. The adsorption of dye increased with increasing initial dye concentration and salt concentration. The equilibrium data were analyzed by the Langmuir and Freundlich models, which revealed that Langmuir model was more suitable to describe the methyl orange adsorption than Freundlich model. Experimental data were analyzed using pseudo-first-order and pseudo-second-order kinetic models. It was found that kinetics followed a pseudo-second-order equation. Thermodynamic study showed that the adsorption was a spontaneous and exothermic process.