Construction and assessment of some perchlorate-selective liquid membrane electrodes

Perchlorate-selective liquid membrane electrodes were developed by incorporating the ion-pair complexes of perchlorate with brucine, cinchonidine, emetine and benzyldimethyltetradecylammonium chloride (zephiramine) in nitrobenzene. The electrodes, which respond to perchlorate ion over the concentration range 1.0–5.0 × 10^?4 M ClO^?₄, have a fast response and wide pH range. The zephiramine-perchlorate electrode was the best in terms of its fast response, wide pH range and high reproducibility of potentials. Most common inorganic and organic anions, except permanganate, do not cause significant interference. Electrodes based on brucine-, emetine- and zephiramine-perchlorate were successfully employed for the direct potentiometric determination of perchlorate in the presence of halides, sulphate, nitrate and chlorate. The cinchonidine-perchlorate electrode showed comparatively poor selectivity.     

The potentiometric behavior of polymer-supported metallophthalocyanines used as anion-selective electrodes

Liquid polymer membrane electrodes based on nickel and manganese phthalocyanines were examined for use as anion-selective electrodes. The electrodes were prepared by incorporating the ionophores into plasticized poly(vinyl chloride) membranes, which were directly coated onto the surfaces of graphite electrodes. The resulting electrodes demonstrate near-Nernstian responses over a wide linear range of perchlorate anion (5 × 10⁻⁷ to 1 × 10⁻¹ M). The electrodes have a fast response time, submicromolar detection limits (5 × 10⁻⁷ M perchlorate), and could be used over a wide pH range of 3.5–10. The influences of lipophilic cationic and anionic additives on the response properties of the electrodes were investigated. The proposed sensors revealed high selectivity for perchlorate over a number of common inorganic and organic anions. The highest selectivity was observed for the electrode based on manganese phthalocyanine in the presence of the lipophilic anionic additive sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate. Application of the electrodes to determine perchlorate in tap water and human urine is also reported.      

Highly selective PVC-membrane electrodes based on Co(II)-Salen for determination of nitrite ion.

A cobalt(II) derivative was used as a suitable ionophore for the preparation of a polymeric membrane nitrite-selective electrode. The electrode reveals a Nemstian behavior over a very wide NO2- ion concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) and a very low detection limit (5.0 x 10(-7) M). The potentiometric response is independent of the pH of solution in the pH range 4.0-9.5. The electrode shows advantages such as low resistance, fast response and, most importantly, good selectivity relative to a wide variety of inorganic and organic anions. In fact, the selectivity behavior of the proposed NO2- ion-selective electrode shows great improvements compared to the previously reported electrodes for nitrite ion. The proposed electrodes could be used for at least 2 months without any significant changes in potentials. The electrode was successfully applied to the determination of nitrate ion concentrations in sausage and milk samples.     

Highly Selective and Sensitive Perchlorate Sensors Based on Some Recently Synthesized Ni(II)‐Hexaazacyclotetradecane Complexes

Three nickel(II)‐hexaazacyclotetradecane complexes were studied to characterize their abilities as perchlorate ion carrier in PVC membrane electrodes. The electrodes based on these complexes exhibit Nernstian responses for ClO over very wide concentration ranges (1.0×10^?1 ?5.0×10^?7 M) with detection limits of 2.0×10^?7 ?5.0×10^?7 M (20–50 ng/mL). The sensors show very good selectivity for ClO ion in comparison with the most common organic and inorganic anions. The responses of the proposed electrodes are independent of pH in the range of 3.5–11.0. The perchlorate selective membranes show fast response time (<10 s) and can be used for 4–12 weeks without any major deviation. The sensors were successfully used to determine the perchlorate ion in water, wastewater and human urine samples.     

Potentiometric anion selectivity of polymer-membrane electrodes based on cobalt, chromium, and aluminum salens

Metallo-salens of cobalt(II) (Co-Sal), chromium(III) (Cr-Sal), and aluminum(III) (Al-Sal) are used as the active ionophores within plasticized poly(vinyl chloride) membranes. It is shown that central metal-ion plays a critical role in directing the ionophore selectivity. Polymer-membrane electrodes based on Co-Sal, Cr-Sal, and Al-Sal are demonstrated to exhibit enhanced responses and selectivity toward nitrite/thiocyanate, thiocyanate, and fluoride anions, respectively. The improved anion selectivity of the three ionophore systems is shown to deviate significantly from the classical Hofmeister pattern that is based only on ion lipophilicity. For example, optimized membrane electrodes for nitrite ion based on Co-Sal exhibit logK(Nitrite,Anion)(pot) values of -5.22, -4.66, -4.48, -2.5 towards bromide, perchlorate, nitrate, and iodide anions, respectively. Optimized membrane electrodes based on Co-Sal and Cr-Sal show near-Nernstian responses towards nitrite (-57.9+/-0.9 mV/decade) and thiocyanate (-56.9+/-0.8 mV/decade), respectively, with fast response and recovery times. In contrast, Al-Sal based membrane electrodes respond to fluoride ion in a super-Nernstian (-70+/-3 mV/decade) and nearly an irreversible mode. The operative response mechanism of Co-Sal, Cr-Sal, and Al-Sal membrane electrodes is examined using the effect of added ionic sites on the potentiometric response characteristics. It is demonstrated that addition of lipophilic anionic sites to membrane electrodes based on the utilized metallo-salens enhances the selectivity towards the primary ion, while addition of cationic sites resulted in Hofmeister selectivity patterns suggesting that the operative response mechanism is of the charged carrier type. Electron spin resonance (ESR) data indicates that Co(II) metal-ion center of Co-Sal ionophore undergoes oxidation to Co(III). This process leads to formation of a charged anion-carrier that is consistent with the response behavior obtained for Co-Sal based membrane electrodes.     

A study of liquid-membrane perchlorate-selective electrodes made from an organic radical ion salt

Liquid-membrane electrodes were prepared from solutions of N-ethyl-benzothiazole-2,2′-azaviolene perchlorate in 1,2-dichlorobenzene and in β,β′-dichlorodiethyl ether, and their response and selectivity characteristics were examined. Perchlorate response ranges of the order I–10^?6.5M and 1–10^?5.6M were shown to be attainable with the two systems, respectively. These values represent significant improvements over the range 1–10^?4.8M found for the solid-state electrode made from the same radical ion salt. Short response times and acceptably stable potentials were observed for both liquid-membrane sensors. Both showed high apparent selectivities for perchlorate over all the ten anions tested. Iodide and tetrafluoroborate were the most serious interferences in each case. The low interference shown by hydrogen and hydroxide ions indicated that perchlorate determinations may be performed within the pH range 1–12 with both electrodes.     

PVC membrane electrodes for potentiometric determination of tripelennamine

The construction of PVC matrix type tripelennamine ion selective electrodes and their use for direct potentiometry, potentiometric titration and flow injection analysis of tripelennamine cation are described. The membranes of these electrodes consist of tripelennamine-tetraphenylborate, reineckate and picrylsulfonate ion-association complexes dispersed in PVC matrix with tributyl phosphate (TBP) plasticizer. The electrodes exhibit near-Nernstian response over the concentration range of 10^–1-10^–4 M tripelennamine over the pH range 4.5–8.0. Selectivity coefficients data obtained for 17 different organic and inorganic ions are presented. The results obtained for the determination of 29 g/ml-29 mg/ml of tripelennamine with the proposed electrodes show average recoveries of 99.5–99.9% and mean standard deviations of 0.6–1.2%. The data agree well with those obtained by the standard methods.     

An investigation of polyphenyl-onium bases and other materials for phosphate ion-selective electrodes

Precipitate-type electrodes (benzidine sulfate or phosphate and hexammino-cobalt(III) nitrate in silicone rubber), and liquid ion-exchanger electrodes based on quaternary ammonium and phosphonium and triphenyltin salts were tested for the assay of phosphate ions. Good sensitivity was achieved with the phosphonium and triphenyltin salts, but both lacked sufficient selectivity for routine-assays.     

Perchlorate-selective electrodes with urushi as the membrane matrix

Perchlorate-selective electrodes prepared from a new matrix, Urushi, and tri-n-octylmethylammonium perchlorate or the Corning perchlorate liquid ion-exchanger are described. The electrodes have linear response ranges and selectivity similar to those of commercial perchlorate-selective electrodes. The membranes are hard, lustrous and smooth; their useful lifetimes exceed 1000 h.     

Determination of SCN- in urine and saliva of smokers and non-smokers by SCN(-)-selective polymeric membrane containing a nickel(II)-azamacrocycle complex coated on a graphite electrode.

The construction, performance characteristics, and application of a novel polymeric membrane coated on a graphite electrode with unique selectivity towards SCN- are reported. The electrode was prepared by incorporating Ni(II)-2,2,4,9,9,11-hexamethyltetraazacyclotetradecanediene perchlorate into a plasticized poly(vinyl chloride) membrane. The influences of membrane composition, pH and foreign ions were investigated. The electrode displays a near Nernstian slope (-57.8 mV decade-1) over a wide concentration range of 1 x 10(-7)-1 x 10(-1) M of SCN- ion. The electrode has a detection limit of 4.8 x 10(-8) M (2.8 ng/cm3) SCN- and shows response times of about 15 s and 120 s for low to high and high to low concentration sequences, respectively. The proposed sensor shows high selectivity towards SCN- over several common organic and inorganic anions. The electrode revealed a great enhancement in selectivity coefficients and detection limit for SCN-, in comparison with the previously reported electrodes. It was successfully applied to the direct determination of SCN- in milk and biological samples, and as an indicator electrode in titration of Ag+ ions with thiocyanate.     

New BF(-)(4) and ClO(-)(4)-selective membrane electrodes and their pharmaceutical applications

The construction and general performance characteristics of ion-selective membrane electrodes sensitive to BF(-)(4) and ClO(-)(4) anions, respectively, are described. All electrodes show near-Nernstian responses in the range 10(-2) -10(-5)M. The selectivity of the electrodes to a number of organic and inorganic anions are reported. The electrodes are useful in the potentiometric determination of a few pharmaceutical preparations. The method is simple, rapid and does not require prior sample pre-treatment.     

Nitrate-selective electrodes based on meso-tetrakis[(2-arylphenylurea)-phenyl]porphyrins as neutral lipophilic ionophores

Polymeric-membrane electrodes for NO₃⁻ anion based on (α,α,α,α)-5,10,15,20-tetrakis [2-(4-methylphenylurea)phenyl]porphyrin I and similar urea-functionalized porphyrins II-IV as neutral ionophores were prepared. The effects of polymeric-membrane composition and test solution pH were tested. The electrodes revealed good selectivity coefficients for NO₃⁻ over a wide variety of other anions, and the values of eight anions were measured. Of the various electrodes prepared, the electrode based on urea-functionalized porphyrin I exhibits a linear stable response over a wide concentration range (1.0×10⁻⁵ to 1.0×10⁻¹) with a slope of −57.4 mV per decade, a detection limit of log[NO₃⁻]=−5.72, and a selectivity coefficient for nitrate against perchlorate anion ().     

Anion selective polymeric membrane electrodes based on cyclopalladated amine complexes

The potentiometric anion selectivity of two polymer membrane based electrodes (I and II) formulated with two new cyclopalladated amine complexes as the active components are examined. The electrodes exhibit a non-Hofmeister selectivity pattern with a significantly enhanced response towards thiocyanate, iodide and nitrite. The graph potential versus log c is linear over the concentration range 10(-6)-6x10(-2) M thiocyanate with electrode I and 10(-6)-10(-3) M with electrode II; 10(-5)-10(-2) M iodide with electrode I and 10(-3)-6x10(-2) M with electrode II; and 10(-3)-6x10(-2) M nitrite with both electrodes. The influence of the plasticizer and pH are studied. The potentiometric selectivity coefficients for I, II and blank membrane electrodes are reported. The selective interaction between Pd(II) thiocyanate, iodide and nitrite is postulated to be the reason for its higher response.     

Plastic membrane electrodes responsive to beta-blocker drugs

The construction and performance characteristics of ion-selective PVC membrane electrodes for metoprolol, propranolol and timolol are described. The electrodes, based on ion-pair complexes with dinonylnaphthalenesulphonate or with tetra(2-chlorophenyl)borate show near-Nernstian responses down to 10(-5)M drug concentration. Their selectivity relative to various inorganic and organic cations is reported. Direct potentiometry is used to determine beta-blocker drugs both in aqueous solutions and pharmaceutical preparations, with good results.     

Mercury(II) ion-selective electrodes based on heterocyclic systems

Mercury ion-selective electrodes (ISEs) were prepared with a polymeric membrane based on heterocyclic systems: 2-methylsulfanyl-4-(4-nitro-phenyl)-l-p-tolyl-1H-imidazole (I) and 2,4-diphenyl-l-p-tolyl-1H-imidazole (II) as the ionophores. Several ISEs were conditioned and tested for the selection of common ions. The electrodes based on these ionophores showed a good potentiometric response for Hg2+ ions over a wide concentration range of 5.0 x 10(5-) - 1.0 x 10(-1)M with near-Nernstian slopes. Stable potentiometric signals were obtained within a short time period of 20 s. The detection limits, the working pH range of the electrodes were 1.0 x 10(-5) M and 1.6-4.4 respectively. The electrodes showed better selectivity for Hg2+ ions over many of the alkali, alkaline-earth and heavy metal ions. Also sharp end points were obtained when these sensors were used as indicator electrodes for the potentiometric titration of Hg2+ ions with iodide ions.     

Calixarene-based potentiometric ion-selective electrodes for silver

Four lipophilic sulphur and/or nitrogen containing calixarene derivatives have been tested as ionophores in Ag(I)-selective poly (vinyl chloride) membrane electrodes. All gave acceptable linear responses with one giving a response of 50 mV/dec in the Ag(I) ion activity range 10(-4)-10(-1)M and high selectivity towards other transition metals and sodium and potassium ions. This ionophore was also tested as a membrane coated glassy-carbon electrode where the sensitivity and selectivity of the conventional membrane electrode was found to be repeated. The latter electrode was then used in potentiometric titrations of halide ions with silver nitrate.     

Pentacoordinate organotin complexes as neutral carriers for salicylate-selective PVC membrane electrodes

Selectivity properties are established for three new electrodes prepared by incorporating three pentacoordinate organotin(IV) complexes, mono(2,4-pentanedionato-o,o') tri(phenylmethyl)tin (DMTBS), mono(benzoylacetonato-o,o') tri(phenylmethyl)tin (MPTBS) and mono(dibenzoylmethanato-o,o') tri(phenylmethyl)tin (DPTBS) into plasticized PVC membranes. These electrodes exhibit linear response to salicylate and an anti-Hofmeister selectivity pattern with high specificity for salicylate over many common anions. The results show that the potentiometric response characteristics are related to the structure of organic ligands. The detection limit and the slope of the electrodes based on these pentacoordinate organotin complexes exhibit a tendency to decrease as the substituent in organic ligands changes from a methyl group to a phenyl group. Electrodes prepared with DMTBS have the best detection limit and the highest degree of selectivity and sensitivity for salicylate. The response mechanism is also investigated by use of a.c. impedance and i.r. spectroscopic techniques.     

Atropine-selective membrane electrodes and relative selectivity concept

TFPB was introduced as a charged ionophore for atropine selective electrodes. Typical Nernstian responses were found (57.78, 58.95 and 58.41 mV/decade) for PVC-membrane electrodes incorporating NPOE, DOS, and DDP as plasticizers. They exhibited practical linear ranges of 9.1 x 10(-3) - 10(-6), 9.1 x 10(-3) - 10(-6) and 9.1 x 10(-3) - 10(-7) M, respectively. It works in the sub-micro scale of atropine concentrations. The optimum pH-range was 3.18 - 8.97. The selectivity coefficient values were estimated for different organic and inorganic cations. They were interpreted by using the "Relative Selectivity Concept", which was introduced for the first time. The new concept was applied for comparing the selectivity properties of previously reported electrodes. The effect of the presence of ephedrine, caffeine, glucose, Na(+), Ca(2+), and Mg(2+) on the calibration graphs of the electrodes was studied.     

Selectivity enhancement of anion-responsive electrodes by pulsed chronopotentiometry

A large and robust selectivity improvement of ion-selective electrodes is presented for the measurement of abundant ions. An improvement in selectivity by more than two orders of magnitude has been attained for the hydrophilic chloride ions measured in a dilute background of the lipophilic ions perchlorate and salicylate in a pulsed chronopotentiometric measurement mode. This is attributed to a robust kinetic discrimination of the dilute lipophilic ions in this measuring mode, which is not possible to achieve in classical potentiometry. Maximum tolerable concentrations of the interfering ions are found to be on the order of 30 μM before causing substantial changes in potential. As an example of practical relevance, the robust detection of chloride in 72 μM salicylate (reflecting 1:10 diluted blood) with a detection limit of 0.5 mM chloride is demonstrated. Corresponding potentiometric sensors did not give a useful chloride response under these conditions.     

Membrane electrodes selective for hydrogen phosphate ions

The possibility of using plasticized polyvinyl chloride film membranes with dispersed electroactive substances (MgNH₄PO₄, BiPO₄, and CrPO₄) for developing electrodes selective for hydrogen phosphate ions has been investigated. It is shown that a chromium(III) phosphate-based electrode is characterized by the linearity range KT^-1-KT^-6 M of the hydrogen phosphate function with a slope of 26.5 mV/pc and a satisfactory selectivity in the presence of chloride, nitrate, sulfate, and hydrogen carbonate ions. Presented at the V All-Russian Conference with the Participation of CIS Countries on Electrochemical Methods of Analysis (EMA-99), Moscow, December 6–8, 1999.