New FRET primers for quantitative real-time PCR

FRET primer real-time PCR chemistry depends on internally labeled primers with FRET dyes linked to their 3′ end. The best distance between the FRET dyes for obtaining the largest signal and the lowest background is six nucleotides. In this study the forward primer was labeled with FAM and the reverse primer with Texas red; the labeled primers meet in cycle two of PCR. At the end of the elongation step FAM is excited to emit fluorescence which will excite Texas red to emit new fluorescence that correlates directly with the quantity of PCR product accumulated. FRET primer techniques amplify short amplicons with unique thermal cycling steps, 0 s at 85 °C for denaturation, 7 s for annealing, and 2 s for elongation. The FRET primer technique was very efficient (92.6, 97.2, and 100%), correlation coefficients were high (1.0, 0.999, and 0.999), and total run time was very short (20, 45, and 40 min per 40 cycles with LightCycler, iCycler, and RotorGene 3000, respectively). When FRET-labeled primers were compared with similar but unlabeled primers it was observed that the FRET primer technique had a lower Ct value and was more efficient than use of unlabeled primers detected by use of SYBR Green I. Figure Schematic diagram of FRET prime real-time PCR Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Integrated DNA purification, PCR, sample cleanup, and capillary electrophoresis microchip for forensic human identification

A fully integrated microdevice and process for forensic short tandem repeat (STR) analysis has been developed that includes sequence-specific DNA template purification, polymerase chain reaction (PCR), post-PCR cleanup and inline injection, and capillary electrophoresis (CE). Fragmented genomic DNA is hybridized with biotin-labeled capture oligos and pumped through a fluidized bed of magnetically immobilized streptavidin-coated beads in microchannels where the target DNA is bound to the beads. The bead-DNA conjugates are then transferred into a 250 nL PCR reactor for autosomal STR amplification using one biotin and one fluorescence-labeled primer. The resulting biotin-labeled PCR products are electrophoretically injected through a streptavidin-modified capture gel where they are captured to form a concentrated and purified injection plug. The thermally released sample plug is injected into a 14 cm long CE column for fragment separation and detection. The DNA template capture efficiency provided by the on-chip sequence-specific template purification is determined to be 5.4% using K562 standard DNA. This system can produce full 9-plex STR profiles from 2.5 ng input standard DNA and obtain STR profiles from oral swabs in about 3 hours. This fully integrated microsystem with sample-in-answer-out capability is a significant advance in the development of rapid, sensitive, and reliable micro-total analysis systems for on-site human identification.     

A universal multiplex PCR strategy for 100-plex amplification using a hydrophobically patterned microarray

Both basic research and clinical medicine have urgent demands for highly efficient strategies to simultaneously identify many different DNA sequences within a single tube. Effective and simultaneous amplification of multiple target sequences is a prerequisite for any successful multiple nucleic acid detection method. Multiplex PCR is one of the best choices for this purpose. However, due to the intrinsic interference and competition among primer pairs in the same tube, multiple rounds of highly empirical optimization procedures are usually required to establish a successful multiplex PCR reaction. To address this challenge, we report here a universal multiplex PCR strategy that is capable of over 100-plex amplification using a specially designed microarray in which hydrophilic microwells are patterned on a hydrophobic chip. On such an array, primer pairs tagged with a universal sequence are physically separated in individual hydrophilic microwells on an otherwise hydrophobic chip, enabling many unique PCR reactions to be proceeded simultaneously during the first step of the procedure. The PCR products are then isolated and further amplified from the universal sequences, producing a sufficient amount of material for analysis by conventional gel electrophoresis or DNA microarray technology. This strategy is abbreviated as "MPH&HPM" for "Multiplex PCR on a Hydrophobically and Hydrophilically Patterned Microarray". The feasibility of this method is first demonstrated by a multiplex PCR reaction for the simultaneous detection of eleven pneumonia-causing pathogens. Further, we demonstrate the power of this strategy with a highly successful 116-plex PCR reaction that required only little prior optimization. The effectiveness of the MPH&HPM strategy with clinical samples is then illustrated with the detection of deleted exons of the Duchenne Muscular Dystrophy (DMD) gene, the results are in excellent agreement with the clinical records. Because of its generality, simplicity, flexibility, specificity and capacity of more than 100-plex amplification, the MPH&HPM strategy should have broad applications in both laboratory research and clinical applications when multiplex nucleic acid analysis is required.     

Strategy for high-fidelity multiplex DNA copy number assay system using capillary electrophoresis devices

Structural variation of human genome such as duplications and deletions, collectively termed copy number variation (CNV), is one of the major genetic variations. Reliable and efficient measurement of CNV will be essential to develop diagnostic tools for CNV-related diseases. We established a strategy based on multiplex PCR and capillary electrophoresis (CE) for reliable CNV assay. Multiplex-PCR was performed using five primer sets for target loci and a diploid control (DC). We designed primers satisfying three conditions: different size of each PCR product for CE separation, unified annealing temperature for multiplex PCR, and suitability for quantitative PCR (qPCR). We defined the accurate PCR cycles for quantification of copy numbers at which the amplifications for all targets were supposed to be exponential, named maximum doubling cycle. CE was carried out with PCR product and the ratio of the peak areas (target/diploid control) was calculated. Our multiplex PCR-CE analysis reliably determined copy numbers of X chromosome with variable copies ranging from 1 to 5 and showed higher reliability than qPCR (correlation coefficient 0.996 versus 0.898). When measuring the six randomly selected autosomal CNV targets using our multiplex PCR-CE, the results agreed with those from qPCR. In addition, our strategy was validated for the broad application to commonly used CE devices. Taken together, this assay will be useful for accurate analysis of multiple disease-associated CNVs in a clinical setting.     

Stability of carbon-centered radicals: effect of functional groups on the energetics of addition of molecular oxygen

In this paper we examine a series of hydrocarbons with structural features which cause a weakening of the C-H bond. We use theoretical calculations to explore whether the carbon-centered radicals R(*) which are created after breaking the bond can be stabilized enough so that they resist the addition of molecular oxygen, i.e. where the reaction R(*) + O(2) --> ROO(*) becomes energetically unfavorable. Calculations using a B3LYP-based method provide accurate bond dissociation enthalpies (BDEs) for R-H and R-OO(*) bonds, as well as Gibbs free energy changes for the addition reaction. The data show strong correlations between R-OO(*) and R-H BDEs for a wide variety of structures. They also show an equally strong correlation between the R-OO(*) BDE and the unpaired spin density at the site of addition. Using these data we examine the major functional group categories proposed in several experimental studies, and assess their relative importance. Finally, we combine effects to try to optimize resistance to the addition of molecular oxygen, an important factor in designing carbon-based antioxidants.     

Radicals produced by gamma-irradiation of hyperquenched glassy water containing 2'-deoxyguanosine-5'-monophosphate

Hyperquenched glassy water (HGW) has been suggested as the best model for liquid water, to be used in low-temperature studies of indirect radiation effects on dissolved biomolecules (Bednarek et al. J. Am. Chem. Soc. 1996, 118, 9387). In the present work, these effects are examined by X-band electron spin resonance spectroscopy (ESR) in gamma-irradiated HGW matrix containing 2'-deoxyguanosine-5'-monophosphate. Analysis of the complex ESR spectra indicates that, in addition to OH(*) and HO2(*) radicals generated by water radiolysis, three species are trapped at 77 K:(i) G(C8)H(*) radical, the H-adduct to the double bond at C8; (ii) G(- *) radical anion, the product of electron scavenging by the aromatic ring of the base; and (iii) dR(-H)(*) radicals formed by H abstraction from the sugar moiety, predominantly at the C'5 position. We discuss the yields of the radicals, their thermal stability and transformations, as well as the effect of photobleaching. This study confirms our earlier suggestion that in HGW the H atom addition/abstraction products are created at 77 K in competition with HO2(*) radicals, in a concerted process following ionization of water molecule at L-type defect sites of the H-bonded matrix. The lack of OH(*) reactivity toward the solute suggests that the H-bonded structure in HGW is much more effective in recombining OH(*) radicals than that of aqueous glasses obtained from highly concentrated electrolyte solutions. Furthermore, complementary experiments for the neat matrix have provided evidence that HO2(*) radicals are not the product of H atom reaction with molecular oxygen, possibly generated by ultrasounds used in the process of sample preparation.     

Detection of two variant Vero toxin genes in Escherichia coli by capillary electrophoresis

Three methods [capillary electrophoresis (CE)-allele-specific PCR, CE-single-strand conformation polymorphism (SSCP) and CE-cleavase fragment length polymorphism (CFLP)] were developed in order to effect rapid and specific analysis of the vero toxin (VT)1 and VT2 genes of O157. The allele-specific polymerase chain reaction (PCR) method, which utilized specific duplex PCR with specific primers for VT1 and VT2, showed that VT1 and VT2 consisted of 174 and 128 bp, respectively. Subsequent CE analysis was carried out. Separation time was 4 min. SSCP, which utilized one primer set which reacted with both VT1 and VT2 in the PCR method, was followed by CE analysis of secondary structure of single-strand DNA. Two genes could be analyzed in approximately 18 min. CFLP, like SSCP, is a method for detecting mutation-induced changes in secondary structure of single-stranded DNA. The endonuclease cleavase I recognizes and cleaves the 5' side of hairpin loops in self-annealed single-strand DNA of PCR product 169 bp obtained from VT1 and VT2. The produced DNA fragments are analyzed by CE and the electrophelogram reveals a sequence-specific CFLP. Separation time was 6 min. These techniques are suitable for the detection and the identification of O157.     

Integrated massively parallel sequencing of 15 autosomal STRs and Amelogenin using a simplified library preparation approach

Massively parallel sequencing (MPS) technologies, also termed as next‐generation sequencing (NGS), are becoming increasingly popular in study of short tandem repeats (STR). However, current library preparation methods are usually based on ligation or two‐round PCR that requires more steps, making it time‐consuming (about 2 days), laborious and expensive. In this study, a 16‐plex STR typing system was designed with fusion primer strategy based on the Ion Torrent S5 XL platform which could effectively resolve the above challenges for forensic DNA database‐type samples (bloodstains, saliva stains, etc.). The efficiency of this system was tested in 253 Han Chinese participants. The libraries were prepared without DNA isolation and adapter ligation, and the whole process only required approximately 5 h. The proportion of thoroughly genotyped samples in which all the 16 loci were successfully genotyped was 86% (220/256). Of the samples, 99.7% showed 100% concordance between NGS‐based STR typing and capillary electrophoresis (CE)‐based STR typing. The inconsistency might have been caused by off‐ladder alleles and mutations in primer binding sites. Overall, this panel enabled the large‐scale genotyping of the DNA samples with controlled quality and quantity because it is a simple, operation‐friendly process flow that saves labor, time and costs.     

Tuning single nucleotide discrimination in polymerase chain reactions (PCRs): synthesis of primer probes bearing polar 4'-C-modifications and their application in allele-specific PCR

There are many methods available for the detection of nucleotide variations in genetic material. Most of these methods are applied after amplification of the target genome sequence by the polymerase chain reaction (PCR). Many efforts are currently underway to develop techniques that can detect single nucleotide variations in genes either by means of, or without the need for, PCR. Allele-specific PCR (asPCR), which reports nucleotide variations based on either the presence or absence of a PCR-amplified DNA product, has the potential to combine target amplification and analysis in one single step. The principle of asPCR is based on the formation of matched or mismatched primer-target complexes by using allele-specific primer probes. PCR amplification by a DNA polymerase from matched 3'-primer termini proceeds, whereas a mismatch should obviate amplification. Given the recent advancements in real-time PCR, this technique should, in principle, allow single nucleotide variations to be detected online. However, this method is hampered by low selectivity, which necessitates tedious and costly manipulations. Recently, we reported that the selectivity of asPCR can be significantly increased through the employment of chemically modified primer probes. Here we report further significant advances in this area. We describe the synthesis of various primer probes that bear polar 4'-C-modified nucleotide residues at their 3' termini, and their evaluation in real-time asPCR. We found that primer probes bearing a 4'-C-methoxymethylene modification have superior properties in the discrimination of single nucleotide variations by PCR.     

Evaluation of the reliability of maize reference assays for GMO quantification

A reliable PCR reference assay for relative genetically modified organism (GMO) quantification must be specific for the target taxon and amplify uniformly along the commercialised varieties within the considered taxon. Different reference assays for maize (Zea mays L.) are used in official methods for GMO quantification. In this study, we evaluated the reliability of eight existing maize reference assays, four of which are used in combination with an event-specific polymerase chain reaction (PCR) assay validated and published by the Community Reference Laboratory (CRL). We analysed the nucleotide sequence variation in the target genomic regions in a broad range of transgenic and conventional varieties and lines: MON 810 varieties cultivated in Spain and conventional varieties from various geographical origins and breeding history. In addition, the reliability of the assays was evaluated based on their PCR amplification performance. A single base pair substitution, corresponding to a single nucleotide polymorphism (SNP) reported in an earlier study, was observed in the forward primer of one of the studied alcohol dehydrogenase 1 (Adh1) (70) assays in a large number of varieties. The SNP presence is consistent with a poor PCR performance observed for this assay along the tested varieties. The obtained data show that the Adh1 (70) assay used in the official CRL NK603 assay is unreliable. Based on our results from both the nucleotide stability study and the PCR performance test, we can conclude that the Adh1 (136) reference assay (T25 and Bt11 assays) as well as the tested high mobility group protein gene assay, which also form parts of CRL methods for quantification, are highly reliable. Despite the observed uniformity in the nucleotide sequence of the invertase gene assay, the PCR performance test reveals that this target sequence might occur in more than one copy. Finally, although currently not forming a part of official quantification methods, zein and SSIIb assays are found to be highly reliable in terms of nucleotide stability and PCR performance and are proposed as good alternative targets for a reference assay for maize.     

Development and validation of a novel SiFaSTRTM 23‐plex system

Human identification and paternity testing are usually based on the study of STRs depending on their particular characteristics in the forensic investigation. In this paper, we developed a sensitive genotyping system, SiFaSTR^? 23‐plex, which is able to characterize 18 expanded Combined DNA Index System STRs (D3S1358, D5S818, D2S1338, TPOX, CSF1PO, TH01, vWA, D7S820, D21S11, D10S1248, D8S1179, D1S1656, D18S51, D12S391, D19S433, D16S539, D13S317, and FGA), three highly polymorphic STRs among Chinese people (Penta D, Penta E, and D6S1043), one Y‐chromosome Indel and amelogenin using a multiplex PCR; the PCR amplified products were analyzed using the Applied Biosystems 3500 Genetic Analyzer. Full genotyping profiles were obtained using only 31.25 pg of control DNA; various case‐type specimens, as well as ten‐year‐old samples were also successfully genotyped. Additionally, in the validation studies, this multiplex was demonstrated to be human‐specific and compatible with the interference of multiple PCR inhibitors. The system also enabled the detection of mixtures, and complete profiles could be obtained at the mixed ratios of 1:1, 1:3, and 3:1. The development and validation study here illustrated that the SiFaSTR^? 23‐plex system is accurate, powerful, and more sensitive than many other systems. What's more, the population data in our study not only illustrated that this 23‐plex typing system was straightforward and efficient but also expanded the Chinese STR database, which could facilitate the appropriate application of the 23 genetic markers in forensic genetics, especially in the Chinese population.     

Application of Single—labelled Probe—primer in PCR Amplification to the Detection of Hepatitis B Virus DNA

A new method based on the incorporation of a single-lablled probe-primer into polymerase chain reaction(PCR) for the detection of PCR-amplified DNA in a closed system is reported.The probeprimerc consists of a specific probe sequence on the 5‘‘‘‘‘‘‘‘-end and a primer sequence on the 3‘‘‘‘‘‘‘‘-end.A flurophore is located at the 5‘‘‘‘‘‘‘‘end.The primeR-quencher is an oligonucleotide,which is complementary to the probe sequence of probe-primer and labelled with a quencher at the 3‘‘‘‘‘‘‘‘-end.In the duplex formed by probe-primer and primer-quencher.the fluorophore and quencher are kept in close proximity to each other.Therefore the fluorescence is quenched.During PCR amplificatio,the specific probe sequence of probeprimer binds to its complement within the same strand of DNA,and is cleaved by Taq DNA polymerase,resulting in the restoration of fluorescence.This system has the same energy transfer mechanism as molecular beacons,and a good quenching effciency can be ensured.Following optimization of PCR conditions,this method was used to detect hepatitis b virus(HBV) dna in patient sera.This technology eliminates the risk of carry-over contamination,simplifies the amplification assay and opens up new possibilities for the real-time detection of the amplified DNA.     

Scope and limitations of Pd2(dba)3/P(i-BuNCH2CH2)3N-catalyzed Buchwald-Hartwig amination reactions of aryl chlorides

Proazaphosphatrane ligands in combination with Pd(2)(dba)(3) generate highly active catalysts for Buchwald-Hartwig amination of aryl chlorides. In particular, commercially available P(i-BuNCH(2)CH(2))(3)N is a highly general and efficient ligand, allowing the coupling of an electronically diverse set of aryl chlorides, including chloropyridines, with a wide variety of amines using 1 mol % of Pd at 100 degrees C. Either a 1:1 or 2:1 ratio of ligand to Pd was found to be effective. This catalyst system performs exceptionally well for sterically hindered substrates, even with only 0.25 mol % of Pd. It is shown that NaOH can also be used as the base (instead of NaO-t-Bu) allowing functionalized substrates to participate in these reactions.     

A mouse serum two-dimensional gel map: application to profiling burn injury and infection

With the importance of mouse as a model to study human diseases and the human and rat plasma/serum two-dimensional (2-D) maps being extensively annotated, this study was aimed at constructing a detailed mouse serum 2-D map. Serum proteins from two different inbred strains of mice (BALB/cJ and C57BL/6J) and mice subjected to two different inflammatory stimuli (20% burn injury and lipopolysaccharide (LPS) injection) were separated on overlapping gels covering pH 3-8 and stained with SYPRO Ruby dye. The tryptic peptides from the resolved spots were analyzed by mass spectrometry, leading to the identification of 38 different gene products. With the exception of major urinary proteins found in abundance in male C57BL/6J mice, little strain difference of the mouse serum 2-D was observed. Many proteins detected in the mouse serum 2-D map were not reported in human or rat serum 2-D maps including epidermal growth factor receptor. Three major murine acute-phase proteins (APPs), haptoglobin, serum amyloid A, and serum amyloid P, were highly induced by both inflammatory stimuli. Image analysis shows that the variations of APPs between these two inflammatory models were not uniform although LPS (100 microg/animal) in general was more effective than 20% burn injury in inducing APPs. Serum amyloid A, much more sensitive to endotoxin than burn injury, may represent a sensitive marker to differentiate these two different inflammatory states.     

Sequence-specific electrochemical detection of double-strand PCR amplicons of PML/RARα fusion gene in acute promyelocytic leukemia

A novel electrochemical method for the sequence-specific detection of double-stranded polymerase chain reaction (PCR) products of PML/RARα fusion gene in acute promyelocytic leukemia (APL) was described in detail. Based on a “sandwich” sensing mode involving a pair of locked nucleic acids probes (capture probe and reporter probe), this DNA sensor exhibited excellent selectivity and specificity. The direct and quantitative analysis of double-stranded complementary was firstly performed by our sensor without the use of alkali, helicase enzymes, or denaturants. Finally, combining PCR technique with electrochemical detection scheme, PCR amplicons (191 bp) of the PML/RARα fusion gene were obtained and rapidly identified with a low detection limit of 79 fmol in the 100-μL hybridization system. The results clearly showed the power of sensor as a promising tool for the sensitive, specific, and portable detection of APL and other diseases.     

Design of multiplex PCR primers using heuristic algorithm for sequential deletion applications

The sequential deletion method is commonly applied to locate the functional domain of a protein. Unfortunately, manually designing primers for multiplex polymerase chain reaction (PCR) is a labor-intensive task. In order to speed up the experimental procedure and to improve the efficiency of producing PCR products, this paper proposes a multiplex PCR primers (MPCRPs) designer to design multiple forward primers with a single 3′-UTR reverse primer for extracting various N-terminal truncated mutants to quickly locate the functional domain of a cDNA sequence. Several factors, including melting temperature, primer length, GC content, internal self-complement, cross-dimerization, terminal limitation, and specificity, are used as the criteria for designing primers. This study obtains a near-optimal solution of primer sets that can be placed in as few test tubes as possible for one multiplex PCR experiment.ResultsHomo sapiens ribosomal protein L5, Homo sapiens xylosyltransferase I, and Bacteriophage T4 gene product 11 were used as test examples to verify efficacy of the proposed algorithm. In addition, the designed primers of Homo sapiens ribosomal protein L5 cDNA were applied in multiplex PCR experiments. A total of 48 forward primers and one reverse primer were designed and used to duplicate N-terminal truncated mutants of different lengths from the protein. The primers were classified into eight tube groups (i.e., test tubes) held within the same temperature range (53–57 °C), and the validity of the PCR products were verified using polyacrylamide gel electrophoresis (PAGE) with the functional domain correctly located. A software implementation of the proposed algorithm useful in assisting the researcher to design primers for multiplex PCR experiments was developed and available upon request.     

Design of allele-specific primers and detection of the human ABO genotyping to avoid the pseudopositive problem

PCR experiments using DNA primers forming mismatch pairing with template lambda DNA at the 3' end were carried out in order to develop allele-specific primers capable of detecting SNP in genomes without generating pseudopositive amplification products, and thus avoiding the so-called pseudopositive problem. Detectable amounts of PCR products were obtained when primers forming a single or two mismatch pairings at the 3' end were used. In particular, 3' terminal A/C or T/C (primer/template) mismatches tended to allow PCR amplification to proceed, resulting in pseudopositive results in many cases. While less PCR product was observed for primers forming three terminal mismatch pairings, target DNA sequences were efficiently amplified by primers forming two mismatch pairings next to the terminal G/C base pairing. These results indicate that selecting a primer having a 3' terminal nucleotide that recognizes the SNP nucleotide and the next two nucleotides that form mismatch pairings with the template sequence can be used as an allele-specific primer that eliminates the pseudopositive problem. Trials with the human ABO genes demonstrated that this primer design is also useful for detecting a single base pair difference in gene sequences with a signal-to-noise ratio of at least 45.     

A support vector machine based method to predict success for polymerase chain reactions

Polymerase chain reaction (PCR) is one of the most popular molecular biological techniques and has been widely applied in many areas. However, PCR still faces challenges nowadays. During recent decades, the experimental procedure of PCR, including the primer design, was always the focus of attention, while little attention was paid to the analysis of the PCR template, and still nobody can accurately predict whether or not a DNA sequence can be simply amplified using conventional Taq DNA polymerase-based PCR protocol. In this study, we focus on the DNA template, the subject of PCR experiment, and introduce a support vector machine (SVM) based method to help evaluate PCR result. Through the Jackknife cross-validation test, our method achieves an accuracy of 92.06%, with 93.62% sensitivity and 90.53% specificity.     

Dynamic characterization of HLA-B*44 Alleles: A comparative molecular dynamics simulation study

Human Leukocyte Antigens (HLA) are highly polymorphic proteins that play a key role in the immune system. HLA molecule is present on the cell membrane of antigen-presenting cells of the immune system and presents short peptides, originating from the proteins of invading pathogens or self-proteins, to the T-cell Receptor (TCR) molecule of the T-cells. In this study, peptide-binding characteristics of HLA-B*44:02, 44:03, 44:05 alleles bound to three nonameric peptides were studied using molecular dynamics simulations. Polymorphisms among these alleles (Asp116Tyr and Asp156Leu) result in major differences in the allele characteristics. While HLA-B*44:02 (Asp116, Asp156) and HLA-B*44:03 (Asp116, Leu156) depend on tapasin for efficient peptide loading, HLA-B*44:05 (Tyr116, Asp156) is tapasin independent. On the other hand, HLA-B*44:02 and HLA-B*44:03 mismatch is closely related to transplant rejection and acute-graft-versus-host disease. In order to understand the dynamic characteristics, the simulation trajectories were analyzed by applying Root Mean Square Deviation (RMSD) and Root Mean Square Fluctuation (RMSF) calculations and hydrogen bonding analysis. Binding dynamics of the three HLA-B*44 alleles and peptide sequences are comparatively discussed. In general, peptide binding stability is found to depend on the peptide rather than the allele type for HLA-B*44 alleles.