共查询到20条相似文献,搜索用时 140 毫秒
1.
Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology
Yin‐Yin Tong Yong‐Quan Dong Fu‐Sheng Du Zi‐Chen Li 《Journal of polymer science. Part A, Polymer chemistry》2009,47(7):1901-1910
A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, 1H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009 相似文献
2.
Peter A. King Ezat Khosravi Osama M. Musa 《Journal of polymer science. Part A, Polymer chemistry》2017,55(18):3041-3047
We report the first example of grafting hyperbranched polyglycerol onto poly(vinyl alcohol) via ring-opening polymerisation of glycidol to prepare poly(vinyl alcohol-graft-hyperbranched glycerol) (P[(VA)-g-(hPG)]). The effects of catalyst, molecular weight of PVA, reaction temperature, water content, moles of reagent, and addition time of reagent were also investigated. P[(VA)-g-(hPG)] with various mole fractions of hPG were prepared and the degrees of substitution and branching were determined. P[(VA)-g-(hPG)] displayed decreased degree of crystallinity and also increased solubility in water, compared to PVA. P[(VA)-g-(hPG)] is shown to be a superior hair styling polymer with a curl retention value of 85% after 4 h. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3041–3047 相似文献
3.
H. Kaczmarek J. Kowalonek Z. Klusek S. Pierzgalski S. Datta 《Journal of Polymer Science.Polymer Physics》2004,42(4):585-602
The photooxidative degradation of blends (in a full range of compositions) of amorphous poly(vinyl chloride) (PVC) with semicrystalline poly(ethylene oxide) (PEO) in the form of thin films is investigated using absorption spectroscopy (UV–visible and Fourier transform infrared) and atomic force microscopy (AFM). The amount of insoluble gel formed as a result of photocrosslinking is estimated gravimetrically. It is found that the PVC/PEO blendsí susceptibility to photooxidative degradation differs from that pure of the components and depends on the blend composition and morphology. Photoreactions such as degradation and oxidation are accelerated whereas dehydrochlorination is retarded in blends. The photocrosslinking efficiency in PVC/PEO blends is higher than in PVC; moreover, PEO is also involved in this process. AFM images showing the lamellar structure of semicrystalline PEO in the blend lead to the conclusion that the presence of PVC does not disturb the crystallization process of PEO. The changes induced by UV irradiation allow the observation of more of the distinct PEO crystallites. This is probably caused by recrystallization of short, more mobile chains in degraded PEO or by partial removal of the less stable amorphous phase from the film surface. These results confirm previous information on the miscibility of PVC with PEO. The mechanism of the interactions between the components and the blend photodegradation are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 585–602, 2004 相似文献
4.
Preparation and thermal properties of thermoplastic poly(vinyl alcohol) complexes with boronic acids
Hiroshi Nishimura Nobuo Donkai Takeaki Miyamoto 《Journal of polymer science. Part A, Polymer chemistry》1998,36(17):3045-3050
Poly(vinyl alcohol) (PVA) was converted into melt flowable derivatives by complexation with a small amount of n-butyl boronic acid (BBA) and phenyl boronic acid (PBA) in dimethylsulfoxide (DMSO), and their thermal properties were examined from a viewpoint of the melt spinning of the complexes. It was found that (1) the melting temperature of the PVA–boronic acid complexes decreases and their degradation temperature increases with increasing the boronic acid content; (2) no gelation occurs for the PVA complexes with BBA and PBA in DMSO; (3) PBA gives a larger melting-temperature depression for PVA than BBA, but the spinnability of the complexes with BBA is much better than that with PBA; and (4) the melt-molded PVA complex fibers can be easily regenerated into PVA fibers with hot water. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3045–3050, 1998 相似文献
5.
Yasuo Gotoh Yoshitaka Nagara Tamaki Nakano Yoshio Okamoto Yutaka Ohkoshi Masanobu Nagura 《Journal of Polymer Science.Polymer Physics》2004,42(5):800-808
The viscoelastic behavior and molecular motion of highly syndiotactic poly(vinyl alcohol) (S‐PVA) fibers with a dyad syndiotacticity (r) of 69% were studied by dynamic mechanical thermal analysis and wide‐angle X‐ray diffraction and compared with those of atactic poly(vinyl alcohol) (A‐PVA) fibers with r = 54%. The βc dispersion, based on the molecular motion of the chain molecules in the crystalline regions, was observed for A‐PVA around 120–140 °C, and the only primary (αc) dispersion was observed for S‐PVA around 180 °C. The thermal expansion coefficients for the a and c axes of the A‐PVA crystal changed discontinuously around 120 °C, which corresponded to the βc dispersion. For S‐PVA, the coefficient for the (002) plane changed discontinuously around 100 °C, similarly to A‐PVA, but that for the (100) plane remained unchanged between 20 and 220 °C. These results showed that the intermolecular hydrogen bonding of S‐PVA was stronger in the direction of the a axis than in the other directions, suppressing the βc dispersion. The storage modulus and thermal expansion coefficient of the (020) plane (molecular axis) of S‐PVA decreased markedly around 180 °C, and this indicated that the αc dispersion was due to the torsional motion of the molecular chains in the crystalline regions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 800–808, 2004 相似文献
6.
Won Seok Lyoo Jin Woo Kwak Jeong Hyun Yeum Byung Chul Ji Chul Joo Lee Seok Kyun Noh 《Journal of polymer science. Part A, Polymer chemistry》2005,43(4):789-800
The particle size distributions of poly(vinyl pivalate) (PVPi) produced from low‐temperature suspension polymerization of vinyl pivalate (VPi) with 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) (AMDMVN) as an initiator have been studied. By controlling various synthesis parameters, near‐monodisperse PVPi microspheres from 100 to 400 μm were obtained that are expected to be precursors of near‐monodisperse syndiotactic poly(vinyl alcohol) (PVA) microspheres for biomedical embolic applications. The mean particle diameter follows the relationship: the volume average diameter, Dvad ∝ Y0.26[VPi]0.52[AMDMVN]?0.25[PVA]0.40T?8.35Rpm?0.67, where Y, [VPi], [AMDMVN], [PVA], T, and Rpm are the fractional conversion, concentrations of VPi, AMDMVN, and suspending agent, polymerization temperature, and agitation speed during the polymerization of VPi, respectively. The polydispersity of the particle size distribution of PVPi decreased with decreasing conversion, [AMDMVN], T, and Rpm and with increasing [VPi]. In the case of [PVA], optimization of the suspension stability led to a narrow particle size distribution. Ultrahigh‐molecular‐weights PVPi and PVA (number‐average degrees of polymerization of PVPi (25,000–32,000) and PVA (14,000–17,500), of high syndiotactic diad content (63%), and of high ultimate conversion of VPi into PVPi (85–95%) were obtained by suspension polymerization at 10 °C, followed by saponification. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 789–800, 2005 相似文献
7.
Correlation between the tacticity and content of labile nondefect structures in poly(vinyl chloride)
Gerardo Martinez Jose Luis Millan 《Journal of polymer science. Part A, Polymer chemistry》2002,40(22):3944-3949
The content of mm isotactic triads taking the GTTG? conformation for samples of poly(vinyl chloride) (PVC) fractions of different tacticities was measured through a substitution reaction with sodium benzenethiolate. This quantity changed linearly with the ratio of rmmmrx to mmmmrx (x = m or r), as accurately determined by 13C NMR spectroscopy. In a comparison of this correlation and that obtained between the thermal degradation stability and overall isotactic content, as studied previously, some novel evidence for the GTTG? conformation of a few mm triads, termini of isotactic sequences no shorter than one heptad as specific labile sites in PVC, was obtained. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3944–3949, 2002 相似文献
8.
Haruyuki Okamura Shogo Toda Masahiro Tsunooka Masamitsu Shirai 《Journal of polymer science. Part A, Polymer chemistry》2002,40(17):3055-3062
Photocrosslinkable systems with thermally cleavable properties based on blends of poly(vinyl phenol) (PVP) and diepoxides were investigated. Thermally cleavable diepoxides as crosslinkers were prepared and characterized. As a thermally cleavable linkage, a tertiary ester moiety was incorporated into the crosslinker molecule. PVP/crosslinker blended films containing photoacid generators (PAGs) became insoluble in solvents after UV irradiation and subsequent post‐exposure‐bake (PEB) treatment. With a rise in the PEB temperature, the insoluble fraction of the irradiated films increased, passed through a maximum value, decreased, and increased again at elevated baking temperatures. The insolubilization profiles of the irradiated films were complicated and strongly dependent on the type of PAG used, the structure of the crosslinkers, and the PVP/crosslinker ratio. A mechanism for the thermal degradation was studied with Fourier transform infrared spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3055–3062, 2002 相似文献
9.
10.
Gerardo Martínez Marián A. Gómez Silvia Villar-Rodil Leoncio Garrido Alan E. Tonelli C. Maurice Balik 《Journal of polymer science. Part A, Polymer chemistry》2007,45(12):2503-2513
This work reports the formation and detailed characterization of the γ-cyclodextrin (γ-CD) inclusion compounds (ICs) formed with two poly (vinyl chloride) samples with different isotactic content. The ICs were characterized by X-ray diffraction, solid state 13C-NMR, solution 1H-NMR, FT-infrared, differential scanning calorimetry, and thermogravimetric analysis. Experimental evidence of the inclusion of the guest polymer chains into the narrow channels created by the γ-CD crystalline host lattice has been obtained. Examination of coalesced poly (vinyl chlorides) (PVCs) obtained after the host γ-CD is removed reveals different characteristics specifically for the coalesced PVC sample with higher isotactic content. An increase in Tg was observed by DSC for this PVC. To the contrary, the Tg of the coalesced PVC sample with lower isotactic content is almost the same as that of the as-synthesized sample. Thermogravimetric analysis indicated that coalesced PVC with higher isotactic content acquires a degree of stabilization after modification by threading into and being extracted from its γ-CD IC. The results suggest that an irreversible conformational change takes place when PVC forms ICs with a solid host lattice like γ-CD. The PVC molecules extend and reorganize into a more stable conformation in the IC, consequently improving the properties of the coalesced sample. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2503–2513, 2007 相似文献
11.
Md. Zulhash Uddin Masashi Watanabe Hirofusa Shirai Toshihiro Hirai 《Journal of Polymer Science.Polymer Physics》2003,41(18):2119-2127
Four different plasticizers were applied to make different poly(vinyl chloride) (PVC) gels, poly(vinyl chloride)‐bis(2‐ethylhexyl)phthalate (PVC‐DOP), poly(vinyl chloride)‐di‐n‐butylphthalate, poly(vinyl chloride)‐bis(2‐ethylhexyl)adipate, and poly(vinyl chloride)‐tris(2‐ethylhexyl)trimellitate. In our previous work, we reported that PVC‐DOP gel exhibits novel and reversible deformations of creeping and jointlike bending induced by direct current electric fields. In this article, we scrutinize the effects of plasticizers on electromechanical actuations, that is, reversible creeping and bending actuation with four of the different aforementioned gels. We measured the relative creeping distance, creeping area, creeping velocity, current observed, and bending angle as a function of applied electric fields for different PVC gels and found significant differences among them. To explain these variations, we compared the utility of plasticizers on the basis of the properties of different PVC gels, such as plasticizer‐retention ability, bending modulus, elongation at break, and the dielectric constant. The mentioned properties of the PVC gels played vital roles on their electromechanical actuations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2119–2127, 2003 相似文献
12.
Alina Sionkowska Anna P?anecka Justyna Koz?owska Joanna Skopińska-Wi?niewska 《Polymer Degradation and Stability》2009,94(3):383-388
The photochemical stability of poly(vinyl alcohol) (PVA) in the presence of 1%, 3% and 5% of collagen has been studied by Fourier Transform Infrared (FTIR) Spectroscopy, UV-vis spectroscopy, and Differential Scanning Calorimetry (DSC). PVA samples containing 1%, 3% and 5% of collagen were irradiated with UV light wavelength λ = 254 nm in air.The results have shown that PVA in the presence of 1%, 3% and 5% of collagen is less stable under UV radiation than pure PVA. A small amount of collagen in PVA enhances photooxidation in the PVA. The amount of crystallinity in PVA containing 1%, 3% and 5% of collagen decreases faster with UV irradiation time than that for pure PVA films. 相似文献
13.
Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)
下载免费PDF全文
![点击此处可从《Journal of Polymer Science.Polymer Physics》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Ainhoa Lejardi Jose‐Ramon Sarasua Agustin Etxeberria Emilio Meaurio 《Journal of Polymer Science.Polymer Physics》2016,54(13):1217-1226
Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to 1H and 13C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226 相似文献
14.
Attapulgite (AT)‐reinforced poly(vinyl alcohol) (PVA) nanocomposite films were prepared by solution‐casting technique. The nonisothermal crystallization behaviors of PVA bulk and PVA/AT nanocomposites have been investigated by differential scanning calorimetry (DSC). It has been found that the uniformly dispersed AT nanorods in the matrix have great influence on the glass transition temperature and crystallization behavior of PVA matrix. The Jeziorny method has been employed to analyze the DSC data. The results show that Jeziorny method could describe this system very well. Comparing with the PVA bulk, PVA/AT nanocomposites have higher crystallinity Xt, shorter semicrystallization time t1/2, and higher crystallization rate constant Zc. It can be concluded that AT can be used as an effective nucleating agent and has effects on the growth of crystallites in the crystallization process of PVA matrix. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 534–540, 2006 相似文献
15.
Jeong Hyun Yeum Byung Chul Ji Chul Joo Lee Ji Youl Lee Sang‐Seob Lee Sam Soo Kim Joon Ho Kim Won Seok Lyoo 《Journal of polymer science. Part A, Polymer chemistry》2002,40(8):1103-1111
To prepare water‐soluble, syndiotacticity‐rich poly(vinyl alcohol) (PVA) microfibrils for various industrial applications, we synthesized syndiotacticity‐rich, low molecular weight PVA by the solution polymerization of vinyl pivalate (VPi) in tetrahydrofuran (THF) at low temperatures with 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN) as an initiator and successive saponification of poly(vinyl pivalate) (PVPi). Effects of the initiator and monomer concentrations and the polymerization temperature were investigated in terms of the polymerization behaviors and molecular structures of PVPi and the corresponding syndiotacticity‐rich PVA. The polymerization rate of VPi in THF was proportional to the 0.91 power of the ADMVN concentration, indicating the heterogeneous nature of THF polymerization. The low‐temperature solution polymerization of VPi in THF with ADMVN proved to be successful in obtaining water‐soluble PVA with a number‐average degree of polymerization (Pn) of 300–900, a syndiotactic dyad content of 60–63%, and an ultimate conversion of VPi into PVPi of over 75%. Despite the low molecular weight of PVA with Pn = 800, water‐soluble PVA microfibrillar fibers were prepared because of the high level of syndiotacticity. In contrast, for PVA with Pn = 330, shapeless and globular morphologies were observed, indicating that molecular weight has an important role in the in situ fibrillation of syndiotacticity‐rich PVA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1103–1111, 2002 相似文献
16.
In the present study, poly(vinyl chloride)/titanium dioxide (PVC/TiO2) nanocomposite films containing different amounts of synthesized TiO2 nanoparticles and commercial rutile powder were irradiated for 5112 hr, under exposure of artificial ultraviolet and visible lights in three different intensities. The rate of degradation was determined by using weight loss data and was found to follow a pseudo‐first order kinetic model. To determine the overall rate constant of degradation, k, a possible mechanism of the photodegradation was considered. The rate equation demonstrated k as a function of TiO2 concentration and irradiation intensity at each wavelength. The overall rate constant of PVC/TiO2 samples were calculated to be varied in the range of 6–16 × 10?7 hr?1, at all investigated conditions. The kinetic study represented that by adding synthesized TiO2 nanoparticles, even at low content, and with increasing their concentration, the photodegradation rate of nanocomposites decreased considerably compared with the composite samples. Likewise, by adding nanoparticles, a significant increase in the nanocomposites lifetime was achieved. The effect of irradiation intensity was investigated according to the reciprocity law experiments, and it was found that photodegradation occurred in two regimes with respect to irradiation intensity. The calculated overall rate constants were validated by the experimental data. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
17.
V. Pilla T. Catunda D. T. Balogh R. M. Faria S. C. Zilio 《Journal of Polymer Science.Polymer Physics》2002,40(17):1949-1956
Nonlinear optical properties of poly(vinyl alcohol) (PVA)/polyaniline (PAni) blends were measured with the single‐beam Z‐scan technique with Fourier analysis. The results obtained with continuous wave (cw) excitation indicated that the self‐phase modulation had a thermal origin. Besides the Z‐scan technique, we also employed the time‐resolved mode‐mismatched thermal lens (TL) technique to obtain the temperature coefficient of the optical path length, ds/dT, and the thermal diffusivity coefficient, D, for the specific concentrations used in our blends. ds/dT varied between ?0.8 and ?1.0 × 10?4 K?1, whereas the thermal diffusivity varied between 1.0 and 1.3 × 10?3 cm2/s. The TL technique was further used to study the aging of the blends as they were heated to 90 °C. Unlike the electrical conductivity of PAni films, which presented a strong dependence on the doping level, the thermooptic properties presented only a slight variation with doping. This feature indicated that the PVA/glutaraldehyde network made the main contribution to the thermooptic properties (D and ds/dT) in the PAni blends. Similarly, dimethyl sulfoxide as a solvent determined the thermooptic properties of PAni solutions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1949–1956, 2002 相似文献
18.
We employed high‐resolution 13C cross‐polarization/magic‐angle‐spinning/dipolar‐decoupling NMR spectroscopy to investigate the miscibility and phase behavior of poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) blends. The spin–lattice relaxation times of protons in both the laboratory and rotating frames [T1(H) and T1ρ(H), respectively] were indirectly measured through 13C resonances. The T1(H) results indicate that the blends are homogeneous, at least on a scale of 200–300 Å, confirming the miscibility of the system from a differential scanning calorimetry study in terms of the replacement of the glass‐transition‐temperature feature. The single decay and composition‐dependent T1ρ(H) values for each blend further demonstrate that the spin diffusion among all protons in the blends averages out the whole relaxation process; therefore, the blends are homogeneous on a scale of 18–20 Å. The microcrystallinity of PVC disappears upon blending with PMMA, indicating intimate mixing of the two polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2390–2396, 2001 相似文献
19.
Masuhiro Tsukada Giuliano Freddi John S. Crighton 《Journal of Polymer Science.Polymer Physics》1994,32(2):243-248
The structure and compatibility of poly(vinyl alcohol)-silk fibroin (PVA/SF) blend films were analyzed by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, x-ray diffractometry, and scanning (SEM) and transmission (TEM) electron microscopy. DSC curves of PVA/SF blend films showed a major endothermic peak at 220°C, along with a peak at 280°C. These endotherms were assigned to the thermal decomposition of the ordered PVA elements and to the thermal degradation of silk fibroin, respectively. The PVA/SF blends behaved in a manner intermediate to the pure components, as suggested by both contraction expansion and sample weight retention properties recorded by TMA and TGA measurements. The IR absorption spectra of the blends were identified as purely a composite of the absorption bands characteristic of both PVA and SF pure polymers. The X-ray diffraction patterns of PVA/SF blends showed overlapping spacing due to PVA and SF. A dispersed phase formed by spherical particles of 3–7 μm diameter was observed by SEM and TEM. All these findings suggest that PVA and SF are incompatible. © 1994 John Wiley & Sons, Inc. 相似文献
20.
To improve the drawability of poly(vinyl alcohol) (PVA) thermal products, poly(ethylene oxide) (PEO), a special resin with good flexibility, excellent lubricity, and compatibility with many resins, was applied, and the Fourier transform infrared spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and wide‐angle X‐ray diffraction (WXRD) were adopted to study the hydrogen bonds, water states, thermal properties, crystal structure, and nonisothermal crystallization of modified PVA. It was found that PEO formed strong hydrogen bonds with water and PVA, thus weakened the intra‐ and inter‐hydrogen bonds of PVA, changed the aggregation states of PVA chains, and decreased its melting point and crystallinity. Moreover, the interactions among PVA, water, and PEO retarded the water evaporation and made more water remain in the system to plasticize PVA. The existence of PEO also slowed down the melt crystallization process of PVA, however, increased the nucleation points of system, thus made more and smaller spherulites formed. The weakened crystallization capability of PVA and the lubrication of PEO made PVA chains to have more mobility under the outside force and obtain high mechanical properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1946–1954, 2010 相似文献