Synthesis of well-defined polychlorostyrenes by living radical polymerization with 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl

Radical polymerization of 2-, 3-, and 4-chlorostyrenes (ClSts) was investigated with benzoyl peroxide (BPO) as an initiator, in the presence of 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO). The polymerization was performed in bulk for 3.5 h at 95°C and then continued for a defined time at 125°C to give the corresponding poly(ClSt)s with narrow polydispersity in high yield. It was found that the polymerization proceeded in accordance with a living mechanism in all cases, because the molecular weight of the resulting polymers was proportional to the conversion, and inversely proportional to the initial concentration of MTEMPO. Furthermore, the polymers obtained from 2- and 3-ClSts quantitatively act as initiators for the polymerization in the living radical manner, of styrene to give the corresponding block copolymers, except for poly(4-ClSt). The thermal stability of the living poly(ClSt)s was found to decrease in the order of 2- > 3- > 4-ClSt on the basis of the results of their postpolymerizations. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2371–2378, 1997     

Nitroxide-mediated photo-living radical polymerization of methyl methacrylate using (4-tert-butylphenyl)diphenyl-sulfonium triflate as a photo-acid generator

The photo-living radical polymerization of methyl methacrylate (MMA) was performed at room temperature using (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) (r-AMDV) as the initiator, 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) as the mediator, and (4-tert-butylphenyl)diphenylsulfonium triflate ( ^t BuS) as the photo-acid generator. The livingness of the polymerization was confirmed on the basis of linear increases in the ln([MMA]₀/[MMA]_t) vs. time and in the molecular weight vs. the conversion. The molecular weight distributions of the resulting polymers were around 1.45. The polymerization rate was dependent both on the ^t BuS/MTEMPO and MTEMPO/r-AMDV molar ratios. Furthermore, it was found that the polymerization had a photo-latency because the polymerization was retarded by the interruption of the irradiation; however, it was accelerated again by further irradiation without deactivation of the growing polymer chain ends.     

Synthesis of a well-defined polybromostyrene by living radical polymerization with a nitroxyl radical

Radical polymerization of p-bromostyrene was investigated with benzoyl peroxide (BPO) as an initiator in the presence of 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO). The polymerization was performed in bulk for 3.5 h at 95°C and then continued for another 48 h at 125°C to afford the corresponding polybromostyrene with a narrow molecular weight distribution in high yield. ¹H NMR study revealed that the polymer obtained had BPO and MTEMPO moieties at its head and tail, respectively. It was confirmed that the polymerization proceeded in accordance with living mechanism, because the molecular weight linearly increased with an increase of the conversion, and it was directly proportional to the reciprocal of the initial concentration of BPO. Furthermore, the polystyrene obtained in the present study could quantitatively act as the initiator for the polymerization of p-bromostyrene in the living radical manner to afford the corresponding block copolymer, and vice versa. © 1996 John Wiley & Sons, Inc.     

Star‐polymer synthesis via radical reversible addition–fragmentation chain‐transfer polymerization

Polystyrene stars were synthesized by reversible addition–fragmentation chain‐transfer (RAFT) polymerization using hexakis(thiobenzoylthiomethyl)benzene ( I ) as a hexafunctional RAFT agent at 80, 100, and 120 °C. The polymerizations conformed to pseudo‐first‐order kinetic behavior. The molecular weight distributions displayed characteristics consistent with a living radical process. A number of salient features were observed in the molecular weight distributions with the star distribution accompanied by a linear polymer‐chain distribution and shoulders on the distributions that can be attributed to radical–radical‐termination events. The evidence suggests that high temperatures are required to activate all the RAFT active sites on I , and a hypothesis proposes that there is significant steric hindrance in the initial stages of the RAFT process with I . © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2777–2783, 2001     

Stability of growing polymer chain ends for nitroxide-mediated photo-living radical polymerization

The stability of the growing polymer chain ends for the nitroxide-mediated photo-living radical polymerization of methyl methacrylate (MMA) was explored through block copolymerization with isopropyl methacrylate ( ⁱ PMA). The block copolymerization of ⁱ PMA was performed with the PMMA prepolymer prepared by the photopolymerization of MMA using the racemic-(2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) (r-AMDV) as the initiator, 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) as the mediator, and (4-tert-butylphenyl)-diphenylsulfonium triflate ( ^t BuS) as the photo-acid generator. When the polymerization of MMA was carried out for 6.5 h, the resulting block copolymer showed a bimodal GPC due to the deactivation of part of the growing chain ends of the prepolymer. On the other hand, when the MMA polymerization was shortened to 5 h, the unimodal block copolymer was obtained without deactivation of the prepolymer.     

Pursuit of reinitiation efficiency of resonance‐stabilized monomeric allyl radical generated via “degradative monomer chain transfer” in allyl polymerization

For a deeper understanding of allyl polymerization mechanism, the reinitiation efficiency of resonance‐stabilized monomeric allyl radical was pursued because in allyl polymerization it is commonly conceived that the monomeric allyl radical generated via the allylic hydrogen abstraction of growing polymer radical from monomer, i.e., “degradative monomer chain transfer,” has much less tendency to initiate a new polymer chain and, therefore, this monomer chain transfer is essentially a termination reaction. Based on the renewed allyl polymerization mechanism in our preceding article, the monomer chain transfer constant in the polymerization of allyl benzoate was estimated to be 2.7 × 10^?2 at 80 °C under the polymerization condition, where the coupling termination reaction of growing polymer radical with allyl radical was negligible and, concurrently, the reinitiation reaction of allyl radical was enhanced significantly. The reinitiation efficiencies of monomeric allyl radical were pursued by the dead‐end polymerizations of allyl benzoate at 80, 105, and 130 °C using a small amount of initiators; they increased remarkably with raised temperature. Thus, the enhanced reinitiation reactivity of allyl radical at an elevated temperature could bias the well‐known degradative monomer chain transfer characteristic of allyl polymerization toward the chain transfer in common vinyl polymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate using various dithiobenzoates as chain transfer agents

Dialkyl fumarates as 1,2‐disubstituted ethylenes exhibit unique features of radical polymerization kinetics due to their significant steric hindrance in propagation and termination processes and provide polymers with a rigid chain structure different from conventional vinyl polymers. In this study, we carried out reversible addition‐fragmentation chain transfer polymerization of diisopropyl fumarate (DiPF) in bulk at 80 °C using various dithiobenzoates with different leaving R groups as chain transfer agents to reveal their performance for control of molecular weight, molecular weight distribution, and chain end functionality of the resulting poly(DiPF) (PDiPF). 2‐(Ethoxycarbonyl)‐2‐propyl dithiobenzoate ( DB1 ) and 2,4,4‐trimethyl‐2‐pentyl dithiobenzoate ( DB2 ) underwent fragmentation and reinitiation at a moderate rate and consequently led to the formation of PDiPF with well‐controlled chain structures. It was confirmed that molecular weight of PDiPF produced by controlled polymerization with DB1 and DB2 agreed with theoretical one and molecular weight distribution was narrow. Dithiobenzoate and R fragments were introduced into the polymer chain ends with high functionality as 95% by the use of DB1 . In contrast, polymerizations using 1‐(ethoxycarbonyl)benzyl dithiobenzoate ( DB3 ), 1‐phenylethyl dithiobenzoate ( DB4 ), and 2‐phenyl‐2‐propyl dithiobenzoate ( DB5 ) resulted in poor control of molecular weight, molecular weight distribution, and chain end structures of PDiPF. Fragmentation and reinitiation rates of the used benzoates as chain transfer agents significantly varied depending on the R structures in an opposite fashion; that is, introduction of bulky and conjugating substituents accelerated fragmentation, but it retarded initiation of DiPF polymerization. It was revealed that balance of fragmentation and reinitiation was important for controlled polymerization of DiPF. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3266–3275     

Photo-living radical polymerization of methyl methacrylate by a nitroxide mediator

The novel photo-living radical polymerization was determined using 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) and bis(alkylphenyl)iodonium hexafluorophosphate (BAI) as the photo-acid generator. The polymerization of methyl methacrylate was performed using azobisisobutylonitrile as an initiator in the presence of MTEMPO and BAI at room temperature by irradiation with a high-pressure mercury lamp to produce poly(methyl methacrylate) with a comparatively narrow molecular weight distribution (M _w/M _n?=?1.3–1.7). The polymerization proceeded by a living mechanism based on the fact that the first-order time-conversion plots linearly increased. A linear increase in the plots of the molecular weight versus the conversion also supported the living nature of the polymerization. It was found that MTEMPO had an interaction with the propagation chain end to control the molecular weight, while BAI weakened the interaction of MTEMPO with the propagation chain end to reduce the molecular weight distribution and polymerization time.     

Higher α‐olefin polymerizations catalyzed by rac‐Me2Si(1‐C5H2‐2‐CH3‐4‐tBu)2Zr(NMe2)2/Al(iBu)3/[Ph3C][B(C6F5)4]

Polymerizations of higher α‐olefins, 1‐pentene, 1‐hexene, 1‐octene, and 1‐decene were carried out at 30 °C in toluene by using highly isospecific rac‐Me₂Si(1‐C₅H₂‐2‐CH₃‐4‐^t Bu)₂Zr(NMe₂)₂ (rac‐1) compound in the presence of Al(iBu)₃/[CPh₃][B(C₆F₅)₄] as a cocatalyst formulation. Both the bulkiness of monomer and the lateral size of polymer influenced the activity of polymerization. The larger lateral of polymer chain opens the π‐ligand of active site wide and favors the insertion of monomer, while the large size of monomer inserts itself into polymer chain more difficultly due to the steric hindrance. Highly isotactic poly(α‐olefin)s of high molecular weight (MW) were produced. The MW decreased from polypropylene to poly(1‐hexene), and then increased from poly(1‐hexene) to poly(1‐decene). The isotacticity (as [mm] triad) of the polymer decreased with the increased lateral size in the order: poly(1‐pentene) > poly(1‐hexene) > poly(1‐octene) > poly(1‐decene). The similar dependence of the lateral size on the melting point of polymer was recorded by differential scanning calorimetry (DSC). ¹H NMR analysis showed that vinylidene group resulting from β‐H elimination and saturated methyl groups resulting from chain transfer to cocatalyst are the main end groups of polymer chain. The vinylidene and internal double bonds are also identified by Raman spectroscopy. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1687–1697, 2000     

Limitations of cyclodextrin‐mediated RAFT homopolymerization and block copolymer formation

The design and synthesis of a new hydrophobic monomer, that is, 4‐(tert‐butyl)phenyl 6‐acrylamidohexanoate (TBP‐AA‐HO) and its ability to form supramolecular host/guest complexes with β‐cyclodextrin (CD) is described. The aqueous CD‐mediated reversible addition fragmentation chain transfer (RAFT) polymerization affords molecular masses up to 8600 g mol^?1 with polydispersities between 1.2 and 1.4. The surprisingly low molecular weights for higher monomer/chain transfer agent (CTA) ratios are investigated by comparing results obtained from free radical and RAFT radical polymerization in aqueous and organic media. The results indicate a steric hindrance caused by attached CD molecules on the growing polymer chain leading to stagnation of the polymerization process due to a restricted accessibility of the reactive chain end. This hypothesis is supported by matrix‐assisted laser desorption/ionization time of flight mass spectrometry. Furthermore, the CD‐mediated synthesis of amphiphilic diblock copolymers in variable aqueous media is described. Hydrophilic poly(N,N‐dimethylacrylamide) macro‐CTAs with different molecular weights are used to polymerize TBP‐AA‐HO at 50 °C. The diblock copolymers are analyzed by ¹H‐nuclear magnetic resonance spectroscopy and size exclusion chromatography. The results confirm the polymer structure and reveal similar limitations of chain growth as observed for the CD‐mediated homopolymerization with a limit of 7000 g mol^?1 for efficient chain extension. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2504–2517     

Precise Synthesis of Optically Active and Thermo-degradable Poly(trifluoromethyl methylene) with Circularly Polarized Luminescence

Developing high performance and environment-friendly fluoropolymers is greatly desired. In this work, we found that 2-diazo-1,1,1-trifluoroethane can be polymerized by air-stable alkyne-palladium(II) catalysts following a living polymerization mechanism, affording a fluoropolymer, poly(trifluoromethyl methylene) in high yield with controlled molar mass and low dispersity. This polymer bears trifluoromethyl on every main chain atom and thus has good resistance to chemical corrosion, high hydrophobicity, and excellent dielectric constant with low dielectric loss. Due to the steric hindrance between the trifluoromethyl pendants, the synthetic poly(trifluoromethyl methylene) can twist into a stable helix. The one-handed preferred helices synthesized using chiral Pd^II-catalysts exhibit high optical activity and circularly polarized luminescence. Remarkably, such polymer can be completely degraded to (E)-1,1,1,4,4,4-hexafluorobut-2-ene at high temperatures (>280 °C). Additionally, taking advantage of the living chain end, the polymer can be further modified.     

Photo-controlled/living radical polymerization of tert-butyl methacrylate in the presence of a photo-acid generator using a nitroxide mediator

The photo-controlled/living radical polymerization of tert-butyl methacrylate was performed using a (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) initiator and a 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (MTEMPO) mediator in the presence of a (4-tert-butylphenyl)diphenylsulfonium triflate photo-acid generator. The bulk polymerization was carried out at 25 °C by irradiation with a high-pressure mercury lamp. Whereas the polymerization in the absence of MTEMPO produced a broad molecular weight distribution, the MTEMPO-mediated polymerization provided a polymer with a comparatively narrow molecular weight distribution around 1.4 without elimination of the tert-butyl groups. The living nature of the polymerization was confirmed on the basis of the linear correlations for the first-order time–conversion plots and conversion–molecular weight plots in the range below 50% conversion. The block copolymerization with methyl methacrylate also supported the livingness of the polymerization based on no deactivation of the prepolymer.     

The ligand effect in Ti‐mediated living radical styrene polymerizations initiated by epoxide radical ring opening. 2. Scorpionate and half‐sandwich LTiCl3 complexes

The ligand effect and the reaction conditions for the living radical polymerization of styrene initiated by epoxide radical ring opening was investigated in a series of piano‐stool, Ti(IV) scorpionate and, half‐sandwich metallocenes (LTiCl₃; L = Tp, Cp*, Ind and Cp, where Tp = hydrotris(pyrazol‐1‐ylborato), Cp* = pentamethylcyclopentadienyl, Ind = indenyl and Cp = cyclopentadienyl). The polymerization is mediated by the reversible termination of the growing chains with Ti(III) species derived from Zn reduction of parent Ti(IV) derivatives. A poor performance was observed for TpTiCl₃ because of probable over‐reduction. The strong electron donating effect of Cp* accounts for a strong C? Ti chain end bond and consequently, a living‐like process is observed only at T > 110 °C. However, both Ind and Cp ligands provide a linear dependence of M_n on conversion and narrow polydispersity over a wide range of experimental conditions. Investigation of the effect of temperature and reagent ratios generates an optimum for epoxide/CpTiCl₃/Zn = 1/2/4 at 70–90 °C. On the basis of a combination of steric and electronic properties, the ligands rank as Cp ≥ Ind ? Cp* ? Tp. This trend is different from coordination polymerization, and in conjunction with our previous results on Cp₂TiCl₂, further supports a radical mechanism. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6039–6047, 2005     

Cationic polymerization of L,L‐lactide

Cationic bulk polymerization of L ,L‐ lactide (LA) initiated by trifluromethanesulfonic acid [triflic acid (TfA)] has been studied. At temperatures 120–160 °C, polymerization proceeded to high conversion (>90% within ～8 h) giving polymers with M_n ～ 2 × 10⁴ and relatively high dispersity. Thermogravimetric analysis of resulting polylactide (PLA) indicated that its thermal stability was considerably higher than the thermal stability of linear PLA of comparable molecular weight obtained with ROH/Sn(Oct)₂ initiating system. Also hydrolytic stability of cationically prepared PLA was significantly higher than hydrolytic stability of linear PLA. Because thermal or hydrolytic degradation of PLA starting from end‐groups is considerably faster than random chain scission, both thermal and hydrolytic stability depend on molecular weight of the polymer. High thermal and hydrolytic stability, in spite of moderate molecular weight of cationically prepared PLA, indicate that the fraction of end‐groups is considerably lower than in linear PLA of comparable molecular weight. According to proposed mechanism of cationic LA polymerization growing macromolecules are fitted with terminal ? OH and ? C(O)OSO₂CF₃ end‐groups. The presence of those groups allows efficient end‐to‐end cyclization. Cyclic nature of resulting PLA explains its higher thermal and hydrolytic stability as compared with linear PLA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2650–2658, 2010     

Structure of a self-assembled hydrogen-bonded ‘living’ main chain liquid crystalline polymer

A main chain hydrogen-bonded liquid crystalline polymer was formed by melt mixing two complementary components, A and B, which in their individual states do not exhibit liquid crystallinity. The structure of the polymer and the thermal stability of its mesophase were studied using synchrotron radiation SAXS/WAXS/DSC at Daresbury (UK) and by variable temperature Fourier transform infrared. The chain extension, or “polymerization” process, was accelerated at the point when the polymer formed a liquid crystalline phase upon cooling from the isotropic melt. The polymer has an aabb chain structure and forms a smectic layer with a length of the A-B repeating unit. The hydrogen-bonded main chain polymer studied here is a monotropic liquid crystal. Above 150°C, it exhibits kinetic stabilization of its monotropic smectic phase. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1617–1624, 1998     

Living cationic polymerization of n‐butyl propenyl ether

Cationic polymerization of n‐butyl propenyl ether (BuPE; CH₃CH CHOBu, cis/trans = 64/36) was examined with the HCl–IBVE (isobutyl vinyl ether) adduct/ZnCl₂ initiating system at −15 ∼ −78 °C in nonpolar (hexane, toluene) and polar (dichloromethane) solvents, specifically focusing on the feasibility of its living polymerization. In contrast to alkyl vinyl ethers, the living nature of the growing species in the BuPE polymerization was sensitive to polymerization temperature and solvent. For example, living cationic polymerization of IBVE can be achieved even at 0 °C with HCl–IBVE/ZnCl₂, whereas for BuPE whose β‐methyl group may cause steric hindrance ideal living polymerization occurred only at −78 °C. Another interesting feature of this polymerization is that the polymerization rate in hexane is as large as in dichloromethane, much larger than in toluene. A new method in determining the ratio of the living growing ends to the deactivated ones was developed with a devised monomer‐addition experiments, in which IBVE that can be polymerized in a living fashion below 0 °C was added to the almost completely polymerized solution of BuPE. The amount of the deactivated chain ends became small in hexane even at −40 °C in contrast to other solvents. Thus hexane turned out an excellent solvent for living cationic polymerization of BuPE. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 229–236, 2000     

Steric effect and mobility of the alkyl chain in regio‐irregular poly‐3‐alkylthiophenes

The physicochemical properties of polyalkylthiophenes with various side‐chain length were widely investigated in order to reveal the functions of alkyl side‐chains in these polymers. The effects of the side‐chains on the properties of polyalkylthiophenes can be explained by their steric hindrance and mobility. The steric hindrance of alkyl chain affected not only the polymerization mechanism of the monomers but also the redox potential, interchain distance, charge transport properties, and film morphology. The mobility of the side‐chain influences the rate of dedoping, heat of transitions of polymers. The structure regio‐regularity, stability of polarons/bipolarons, film morphologies, and interchain interactions determine the optical and electric properties of polyalkylthiophenes. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1763–1772, 1999     

Chain transfer agents in cationic photopolymerization of a bis‐cycloaliphatic epoxide monomer: Kinetic and physical property effects

The effects of chain transfer agents (CTA) on cationic ring‐opening polymerization of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were explored. EEC was polymerized in the presence of various CTAs, and epoxide conversions monitored via Raman spectroscopy. Polymer films were prepared and analyzed by dynamic mechanical analysis. Many of the organic alcohols studied greatly enhanced epoxide polymerization rates and conversion levels. The gel fraction of polymer specimens decreased rapidly with increasing amounts of octanol (gel fraction >90% up to 0.3 equiv OH) but remained high with increasing amounts of 1,2‐propanediol (gel fraction >90% up to 0.6 equiv OH). Increasing the size of primary alcohols had little effect on the polymerization rates and conversions. The polymerization rate decreased with increasing alcohol substitution (1°>2°>3°). Acidic alcohols had very low impact on conversion and polymerization rates relative to the neat epoxy resin. The glass transition temperature was inversely related to the size and amount of CTA. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Demonstration of isospecific free radical polymerization of acrylate controlled by conformation and chirality of monomer

Radical polymerization of lactic acid‐based chiral and achiral methylene dioxolanones, a model for conformationally s‐cis locked acrylate, was carried out with AIBN to demonstrate an isospecific free radical polymerization controlled by chirality and conformation of monomer. Polymerization of the dioxolanones proceeded smoothly without ring opening to give a polymer with moderate molecular weight and 100% of maximum isotacticity. ESR spectrum indicated a twisted conformation of the growing poly(methylene dioxolanone) radical in contrast to an acyclic analogous radical, suggesting a restriction of the free rotation around main chain C_α? C_β bond of the growing radical center. Chirality as well as the polarity and bulkiness of monomer affected the polymer tacticity, and chiral alkyl substituent would afford a high isotactic polymer, in which higher the enantiomeric excess of the monomer was, higher the isotacticity of the polymer was. While, achiral or polar substituents including dibenzyl and trichloromethyl groups would afford an atactic polymer. In addition, glass transition temperature (T_g) of the resulting polymers was significantly high, ranging from 172.2 to 229.8 °C, and even for an isotactic polymer T_g was as high as 206.8 °C. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2007–2016     

Controlled/living radical polymerization of vinylcyclicsilazane by RAFT process and their block copolymers

High molecular weight poly(vinyl)silazane were synthesized successfully by reversible addition fragmentation chain transfer (RAFT) polymerization in toluene at 120 °C, using dithiocarbamate derivatives and 2,2′‐azobis‐isobutyrylnitrile (AIBN) as the RAFT agents and thermal initiator, respectively. The polymerization of a vinylcyclicsilazane oligomer with 82.5% conversion was readily controlled to increase the molecular weight from 1000 to 12,000 g/mol with a narrow polydispersity <1.5. The resulting polymer showed a high ceramic yield of 70 wt % at 1000 °C. Moreover, the approach was extended successfully to the synthesis of poly(vinyl)silazane‐block‐polystyrene as an inorganic–organic diblock copolymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4594–4601, 2008