Thermal degradation processes of poly(carbonate) and poly(methyl methacrylate) in blends coalesced either from their common inclusion compound formed with γ-cyclodextrin or precipitated from their common solution

Direct insertion probe pyrolysis mass spectrometry (DIP-MS) analyses of a PC/PMMA blend, coalesced from their common inclusion compound (ICs) formed with host γ-cyclodextrin (γ-CD) through removal of the γ-CD host, and a physical PC/PMMA blend, precipitated from their common solution, have been performed and compared with those of the coalesced and as-received homopolymers. A slight increase in the thermal stability of the PMMA component in the presence of PC was recorded both by TGA and DIP-MS compared to the corresponding homopolymers. The DIP-MS observations pointed out that the thermal stability and degradation products of these polymers are affected once they are included inside the IC channels created by the stacked host CDs. DIP-MS observations suggested that for both coalesced and physical PC/PMMA blends, an exchange reaction occurs between carbonates of PC and MMA, formed by depolymerization of PMMA above 300 °C, most likely due to diffusion of MMA monomer at the interface or even into the PC domains, where it can react producing low molecular weight PC bearing methyl carbonate and methacrylate chain ends. The results also indicated an ester-ester interchange reaction between PC and PMMA yielding a graft copolymer and low molecular weight PC chains bearing methyl carbonate end groups in the case of the coalesced blend. This can be atttributed to the presence of specific molecular interactions between the intimately mixed PMMA and PC chains in the coalesced PC/PMMA blend.     

Pyrolysis mass spectrometry analysis of polycarbonate/poly(methyl methacrylate)/poly(vinyl acetate) ternary blends

Direct insertion probe pyrolysis mass spectrometry (DIP-MS) analyses of polycarbonate/poly(methyl methacrylate)/poly(vinyl acetate), (PC/PMMA/PVAc), ternary blends have been performed. The PC/PMMA/PVAc ternary blends were obtained by coalescing from their common γ-cyclodextrin-inclusion compounds (CD-ICs), through the removal of the γ-CD host (coalesced blend), and by a co-precipitation method (physical blend). The coalesced ternary blend showed different thermal behaviors compared to the co-precipitated physical blend. The stability of PC chains decreased due to the reactions of CH₃COOH formed by deacetylation of PVAc above 300 °C, for both coalesced and physical blends. This process was more effective for the physical blend most likely due to the enhanced diffusion of CH₃COOH into the amorphous PC domains, where it can further react producing low molecular weight PC fragments bearing methyl carbonate chain ends. The decrease in thermal stability of PC chains was less significant for the coalesced ternary blend indicating that the diffusion of CH₃COOH was either somewhat limited or competed with intermolecular reactions between PMMA and PC and between PMMA and PVAc, which were detected and were associated with their close proximity in the intimately mixed coalesced PC/PMMA/PVAc ternary blend.     

Phase morphology of blends of polycarbonate with poly(methyl methacrylate-co-cyclohexyl methacrylate), and of polycarbonate with poly(methyl methacrylate) by solid state nuclear magnetic resonance,differential scanning calorimetry,and transmission electron microscopy

The miscibility of polycarbonate (PC) with poly(methyl methacrylate-co-cyclohexyl methacrylate) (PMCHM) and with poly(methyl methacrylate) (PMMA) was studied by nuclear magnetic resonance (NMR) ¹H spin-lattice relaxation time in the rotating frame (¹H T_1p), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). A blend of PC/PMCHM (50/50 wt/wt) with the acrylic component PMCHM, a copolymer of PMMA and poly(cyclohexyl methacrylate) (80/20 wt/wt), shows only one T_1p value, which indicates high miscibility in this blend. A blend of PC/PMMA (50/50 wt/wt) shows two ¹H T_1p values, which are similar to those of the homopolymers PC and PMMA. These results indicate high immiscibility. The “domain size” calculated from NMR results of the miscible blend PC/PMCHM is approximately 40 Å. The results of DSC and TEM are similar to the NMR results. However, TEM results show the presence of 3% PC domains in the PC/PMCHM blend, which are not seen by NMR or DSC. Those PC domains are approximately 500 Å. A strong intramolecular repulsion in the copolymer PMCHM and specific intermolecular interactions between PC and PMMA may explain the miscibility in the PC/PMCHM system. © 1994 John Wiley & Sons, Inc.     

Reaction-induced phase separation in a semiinterpenetrating network of reactive ternary blends

Morphology and reaction mechanisms were probed on a model reactive ternary blend system of polycarbonate (PC), poly(methyl methacrylate) (PMMA), and diglycidylether of bisphenol-A (DGEBA) epoxy by using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). Molecular interactions/reactions between the components in the blends after heating treatments are discussed. It was found that reactions took place among the components and that an interpenetrating network was built. The possible reaction mechanisms and the resulting structures after the heating treatments were probed. In the blends, PC and DGEBA reacted to form a network, while PMMA remained free. The semiinterpenetration, however, did not result in a network interlocked into a homogeneous state. The single T_g of the heated ternary DGEBA/PC/PMMA blends actually did not reflect a homogeneous interpenetrating network. Due to relatively small PMMA domains, the ternary blend network exhibited a single T_g. Upon etching the PMMA domains from the blend by acetone, a clearly interpenetrating network of reacted PC and epoxy was exposed and confirmed. The reactions leading to such a morphology are discussed with experimental evidence. © 1996 John Wiley & Sons, Inc.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

Thermal degradation of polycarbonate-poly(methyl methacrylate) blends by thermal volatilisation analysis

The degradation of bisphenol A polycarbonate (PC), poly(methyl methacrylate) (PMMA) and a 1:1 by weight blend of PC and PMMA have been studied by thermogravimetry, thermal volatilisation analysis and differential scanning calorimetry. Volatile products have been investigated and separated by subambient TVA and characterised spectroscopically. In the degradation of the blend, no change is observed in the nature of the volatile products of degradation, but the rate of degradation of the PC component is increased and the PMMA depolymerisation is retarded. It is suggested that PMMA radicals attack PC macromolecules leading to chain scission in the PC at lower temperatures than required for homolysis in pure PC. This unusual form of interaction involving a macroradical and a macromolecule is made possible by the homogeneous character of the molten blend.     

The effect of zinc bromide on the thermal degradation of poly(methyl methacrylate): Part 2—Reaction products,structural changes and degradation mechanism

Blends of poly(methyl methacrylate) (PMMA) and zinc bromide containing 11·25, 2 and 1 MMA chain units per ZnBr₂ molecule, respectively, have been studied under temperature-programmed and isothermal conditions. The products of degradation have been identified and quantitative measurements have been made of the production of MMA, methyl bromide and methanol. Structural changes in the partially degraded polymer have also been followed, and the residue at 500°C has been shown to consist of zinc oxide, zinc and carbon.A mechanism has been suggested which is consistent with all the experimental observations. At room temperature, ZnBr₂ forms a complex with PMMA. On heating, the most important process to occur at low temperatures (130–300°C) is the release of CH₃Br and the formation of zinc methacrylate chain units. An alternative reaction of the original complex—also yielding CH₃Br, and, in this case, producing, in addition, ZnO—leads to some anhydride rings in the polymer chain. Both of these new chain structures block the unzipping of PMMA to produce monomer. Methanol and CO are thought to result from the decomposition of single MMA units. At higher temperatures, the products are those expected from the decomposition of zinc polymethacrylate and the anhydride rings.     

In situ preparation of cross‐linked polystyrene/poly(methyl methacrylate) blend foams with a bimodal cellular structure

In situ preparation of a cross‐linked poly(methyl methacrylate) (PMMA) and polystyrene (PS) blend and its foaming were investigated for creating a bimodal cellular structure in the foam. Methyl methacrylate (MMA) monomer was dissolved in PS under supercritical CO₂ at a temperature of 60 °C and a pressure of 8 MPa, and the polymerization of MMA was conducted at 100 °C and 8 MPa CO₂, with a cross‐linking agent in PS. The blend was successively foamed by depressurizing the CO₂. CO₂ played the roles of plasticizing the PS and enhancing the monomer dispersion in PS during the sorption process and as a physical blowing agent in the foaming process. The cross‐linking agent was used for controlling the elasticity of polymerized PMMA domains and differentiating their elasticity from that of the PS matrix. The difference in elasticity delayed the bubble nucleation in the PMMA domains from that in the PS and made the cell size bimodal distribution, in which the smaller cells ranging from 10 to 30 µm in diameter were located in the wall of large cells of 200–400 µm in diameter. The effects of the initial MMA content, the concentration of cross‐linking agent, and the depressurization rate on the bimodal cell structure and bulk foam density were investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

Phase behavior and modeling of the poly(methyl methacrylate)–CO2–methyl methacrylate system

Cloud-point data for the system poly(methyl methacrylate) (PMMA)–CO₂–methyl methacrylate (MMA) are measured in the temperature range of 26 to 170°C, to pressures as high as 2500 bar, and with cosolvent concentrations of 10.4, 28.9, and 48.4 wt.%. PMMA does not dissolve in pure CO₂ to 255°C and 2550 bar. The cloud-point curve for the PMMA–CO₂–10.4 wt.% MMA system exhibits a negative slope that reaches 2500 bar at 105°C. With 28.9 wt.% MMA the cloud-point curve remains relatively flat at ∼900 bar for temperatures between 25 and 170°C. With 48.4 wt.% MMA the cloud-point curve exhibits a positive slope that extends to 20°C and ∼100 bar. Pressure-composition isotherms are also reported for the CO₂–MMA system at 40.0, 80.0, 105.5°C. This system exhibits type-I phase behavior with a continuous mixture–critical curve. The Peng–Robinson (PR) and SAFT equations of state model the CO₂–MMA data reasonably well without any binary interaction parameters, although the PR equation provides a better representation of the mixture-critical region. It is not possible to obtain even a qualitative fit of the PMMA–MMA–CO₂ data with the SAFT equation of state. The SAFT model qualitatively shows that the cloud-point pressure decreases with increasing MMA concentration and that the cloud-point curve exhibits a positive slope for very high concentrations of MMA in solution.     

Sequential synthesis of multiblock copolymers by atom transfer radical and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate (MMA), styrene (S), and isobutylene (IB) were prepared by a three‐step synthesis, which included atom transfer radical polymerization (ATRP) and cationic polymerization: (1) poly(methyl methacrylate) (PMMA) with terminal chlorine atoms was prepared by ATRP initiated with an aromatic difunctional initiator bearing two trichloromethyl groups under CuCl/2,2′‐bipyridine catalysis; (2) PMMA with the same catalyst was used for ATRP of styrene, which produced a poly(S‐b‐MMA‐b‐S) triblock copolymer; and (3) IB was polymerized cationically in the presence of the aforementioned triblock copolymer and BCl₃, and this produced a poly(IB‐b‐S‐b‐MMA‐b‐S‐b‐IB) pentablock copolymer. The reaction temperature, varied from ?78 to ?25 °C, significantly affected the IB content in the product; the highest was obtained at ?25 °C. The formation of a pentablock copolymer with a narrow molecular weight distribution provided direct evidence of the presence of active chlorine at the ends of the poly(S‐b‐MMA‐b‐S) triblock copolymer, capable of the initiation of the cationic polymerization of IB in the presence of BCl₃. A differential scanning calorimetry trace of the pentablock copolymer (20.1 mol % IB) showed the glass‐transition temperatures of three segregated domains, that is, polyisobutylene (?87.4 °C), polystyrene (95.6 °C), and PMMA (103.7 °C) blocks. One glass‐transition temperature (104.5 °C) was observed for the aforementioned triblock copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6098–6108, 2004     

Controlled Anionic Synthesis of Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate]

Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate] (poly(NCzMA)) with controlled molecular weight and narrow molecular weight distribution was successfully synthesized using (methyl methacryloyl)potassium (MMA) as a weak initiator in the presence of diethylzinc (Et₂Zn) in THF at –78°C. Et₂Zn acted both as an additive for the coordination with enolate anion and nitro group and as a scavenger to remove impurities. Block copolymers PMMA‐block‐poly(NCzMA)‐block‐PMMA and poly(NCzMA)‐block‐PS‐block‐poly(NCz‐MA), were also synthesized quantitatively (PMMA: poly(methyl methacrylate), PS: polystyrene). The results indicate that Et₂Zn can be used to synthesize the polymers of solid, nitro group‐containing methacrylate monomers by anionic polymerization in THF.     

Reverse atom transfer radical polymerization of methyl methacrylate with a new catalytic system,FeCl3/isophthalic acid

A new catalytic system, FeCl₃/isophthalic acid, was successfully used in the reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) in the presence of a conventional radical initiator, 2,2′‐azo‐bis‐isobutyrontrile. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in an N,N‐dimethylformamide solvent at 90–120 °C. The polymerization was controlled up to a molecular weight of 50,000, and the polydispersity index was 1.4. Chain extension was performed to confirm the living nature of the polymer. The kinetics of the RATRP of MMA with FeCl₃/isophthalic acid as the catalyst system was investigated. The apparent activation energy was 10.47 kcal/mol. The presence of the end chloride atom on the resulting PMMA was demonstrated by ¹H NMR spectroscopy. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 765–774, 2001     

Catalytic effect of dimethyl sulfoxide in the Cu(0)/tris(2‐dimethylaminoethyl)amine‐catalyzed living radical polymerization of methyl methacrylate at 0–90 °C initiated with CH3CHClI as a model compound for α,ω‐di(iodo)poly(vinyl chloride) chain ends

A variety of conditions, including catalysts [CuCl, CuI, Cu₂O, and Cu(0)], ligands [2,2′‐bipyridine (bpy), tris(2‐dimethylaminoethyl)amine (Me₆‐TREN), polyethyleneimine, and hexamethyl triethylenetetramine], initiators [CH₃CHClI, CH₂I₂, CHI₃, and F(CF₂)₈I], solvents [diphenyl ether, toluene, tetrahydrofuran, dimethyl sulfoxide (DMSO), dimethylformamide, ethylene carbonate, dimethylacetamide, and cyclohexanone], and temperatures [90, 25, and 0 °C] were studied to assess previous methods for poly(methyl methacrylate)‐b‐poly(vinyl chloride)‐b‐poly(methyl methacrylate) (PMMA‐b‐PVC‐b‐PMMA) synthesis by the living radical block copolymerization of methyl methacrylate (MMA) initiated with α,ω‐di(iodo)poly(vinyl chloride). CH₃CHClI was used as a model for α,ω‐di(iodo)poly(vinyl chloride) employed as a macroinitiator in the living radical block copolymerization of MMA. Two groups of methods evolved. The first involved CuCl/bpy or Me₆‐TREN at 90 °C, whereas the second involved Cu(0)/Me₆‐TREN in DMSO at 25 or 0 °C. Related ligands were used in both methods. The highest initiator efficiency and rate of polymerization were obtained with Cu(0)/Me₆‐TREN in DMSO at 25 °C. This demonstrated that the ultrafast block copolymerization reported previously is the most efficient with respect to the rate of polymerization and precision of the PMMA‐b‐PVC‐b‐PMMA architecture. Moreover, Cu(0)/Me₆‐TREN‐catalyzed polymerization exhibits an external first order of reaction in DMSO, and so this solvent has a catalytic effect in this living radical polymerization (LRP). This polymerization can be performed between 90 and 0 °C and provides access to controlled poly(methyl methacrylate) tacticity by LRP and block copolymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1935–1947, 2005     

The disorderly exfoliated LDHs/PMMA nanocomposites synthesized by in situ bulk polymerization: The effects of LDH-U on thermal and mechanical properties

The disorderly exfoliated layered double hydroxides/poly(methyl methacrylate) (LDHs/PMMA) nanocomposites were obtained in a two-stage process by the in situ bulk polymerization of methyl methacrylate (MMA) in the presence of 10-undecenoate intercalated LDH (LDH-U). The dispersed behavior of the LDH-U in the PMMA matrix was identified by using X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV/visible transmission spectroscopy. All these nanocomposites showed significantly enhancement of glass transition temperature (T_g) and the decomposition temperatures compared to pristine PMMA, as identified in differential scanning calorimetry (DSC) and thermogravimetric (TGA) analysis. The tensile modulus of these nanocomposites was also enhanced by incorporating the LDH-U into the PMMA matrix and increased as the amount of LDH-U increased. According to the analytical method of Ozawa-Flynn, the degradation activation energies of these nanocomposites are higher than that of pristine PMMA.     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

In situ Synthesis of Poly(methyl methacrylate)/Graphene Oxide Nanocomposites Using Thermal-initiated and Graphene Oxide-initiated Polymerization

A facile and cost-effective method to prepare poly(methyl methacrylate) (PMMA)/graphene oxide (GO) nanocomposites was developed by in situ polymerization. By using thermal-initiated and GO-initiated polymerization of methyl methacrylate (MMA), no extra radical initiator was added during the reaction. Without any pre-functionalization of GO, PMMA chains were covalently bonded to its surface, which was confirmed by Fourier-transform infrared, atomic force microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy investigations. TGA analysis showed that the mass ratio of grafted PMMA and GO was as high as 1.7. Transmission electron microscopy and X-ray powder diffraction investigations demonstrated that the grafting of PMMA chains to GO surfaces resulted in homogeneous dispersion of GO sheets in PMMA matrix, which led to a commendable performance on its mechanical and thermal properties. Dynamic mechanical analysis showed that, at a loading level of just 0.5 wt% for the nanocomposites, the storage modulus of the nanocomposites was improved 14%, and the glass transition temperature was increased 12°C in comparison with that of neat PMMA. Thermogravimetric analysis showed that the onset degradation temperature of the nanocomposites was increased 13°C with a GO content of 0.25 wt%.     

Preparation of poly(methyl methacrylate) microcapsules by in situ polymerization on the surface of calcium carbonate particles

Poly(methyl methacrylate) (PMMA) microcapsules were prepared by the in situ polymerization of methyl methacrylate (MMA) and N,N′-methylenebisacrylamide on the surface of calcium carbonate (CaCO₃) particles, followed by the dissolution of the CaCO₃ core in ethylenediaminetetraacetic acid solution. The microcapsules were characterized using fluorescence microscopy, atomic force microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The average sizes of the CaCO₃ particles and PMMA capsules were 3.8 ± 0.6 and 4.0 ± 0.6 μm, respectively. A copolymer consisting of MMA and rhodamine B-bearing MMA was also used to prepare microcapsules for fluorescent microscopy observations. Fluorescein isothiocyanate-labeled bovine serum albumin was enclosed in the PMMA microcapsules and its release properties were studied.     

Effect of Organic Nano Carboncapsule Incorporated Modified Clay on Fire‐Retardancy of PMMA Nanocomposites

Here we investigate a new type of highly flame retardant poly(methyl methacrylate) (PMMA) nanocomposite by bulk polymerization of methyl methacrylate (MMA) in the presence of organic nano carboncapsule (OCNC/NCNC)‐incorporated modified montmorillonites (CL120, CL42). The morphology of the modified clay was confirmed by X‐ray diffraction (XRD), and Fourier transform infrared (FT‐IR) spectroscopy was used to identify the functional groups in the clay. The nano morphological characterization of the clay in the PMMA matrix was confirmed by XRD and transmission electron microscopy (TEM). The thermal and mechanical properties of the PMMA nanocomposites were investigated by thermogravimetry and dynamic mechanical analysis, respectively. PMMA containing organo nano carboncapsule‐doped CL42 modified cocoamphodipropionate (K2) (P‐O‐CL42) could achieve very high thermal stability compared to pristine PMMA. The 5% thermal decomposition temperature (T _5d) increased by 63.2°C. Storage modulus of PMMA nanocomposites measured by DMA analysis. An enhancement of storage modulus and significant reduction in the peak heat release (PHR) rate were observed in the almost all PMMA nanocomposites as compared to pristine PMMA. Moreover, these results suggest that PMMA nanocomposites can have potential applications in the building industry and the medical field.     

Synthesis and radiation degradation of vinyl polymers with fluorine: Search for improved lithographic resists

Homopolymers of methyl α-fluoroacrylate (MFA), trifluoroethyl methacrylate (TFEM), and hexafluoroisopropyl methacrylate (HFIM) were prepared, as were their methyl methacrylate (MMA) copolymers. Copolymers of vinylidene fluoride (VDF) and chlorotrifluoroethylene (CTFE) with MMA were also prepared. The radiation susceptibilities of these polymers were measured by the ⁶⁰Co γ-irradiation method, in which molecular weights were measured by membrane osmometry and gel permeation chromatography (GPC). All the copolymers degraded by predominant chain scission except poly(methyl α-fluoroacrylate), (PMFA), which crosslinks even at low doses (ca. 1 Mrad). The G_s - G_x and G_s values of the chain scissioning polymers and copolymers are higher than those of poly(methyl methacrylate) PMMA reference. The high susceptibility of PMFA homopolymer to crosslinking is in contrast to that of poly(methyl α-chloroacrylate), as we reported earlier. This effect is interpreted as resulting from extensive hydrogen fluoride and polyenlyl radical formation, which leads to facile crosslinking. However, incorporation of the MFA monomer unit causes the (22/78) MFA/MMA copolymer to degrade with a larger value of G_s that PMMA. Apparently a second-order process leads to crosslinking in PMFA and this is retarded in the copolymer. In the hehomopolymers of HFIM and TFEM and in the HFIM-MMA and TFEM-MMA copolymers the HFIM and TFEM components facilitate degradation with negligible crosslinking. The increased degradation susceptibility of VDF and CTFE copolymers with MMA over that of PMMA is attributed to processes at the VDF or CTFE components present in smaller concentrations (3-5 mole %) than the threshold levels (25-50% necessary for significant crosslinking).     

PMMA/PC Blends: Effect of Mixing Conditions on Compatibility

In this work the effect of melt mixing condition and of a trans-esterification catalyst on miscibility of poly(methyl methacrylate) (PMMA)/polycarbonate of bisphenol A (PC) blends is studied. In particular, at high temperature chemical reactions between PMMA and PC phases can take place; these strongly change the compatibility in the blend and materials having single T_g can be obtained. FT-IR analyses, coupled with solvent extraction, suggest that a grafting reaction of PC on PMMA is involved. SEC and DSC data are consistent with spectroscopic results, and some decrement of the molar weight distribution (MWD) of PC phase is observed. On the other hand, the presence of a fraction of modified material having higher MWD of starting PMMA is also noticed. The single T_g characteristic of some materials has been confirmed by experimental data of structural relaxation performed by differential scanning calorimetry (DSC). These materials showed optical clarity and the morphological analysis performed by scanning electron microscopy (SEM) confirm the homogeneity of these materials.