New side chain ferroelectric liquid crystalline polymers based on (2S, 3S)-2-chloro-3-methylpentanoic acid: synthesis and phase behaviour

The synthesis of four new chiral mesogenic monomers (M₁–M₄) and side chain ferroelectric liquid crystalline polymers containing (2S, 3S)-2-chloro-3-methylpentanoate is described. The chemical structures and phase behaviour of the monomers and polymers obtained in this study were characterised by Fourier transform infrared, proton nuclear magnetic resonance, polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis and X-ray diffraction. The selective reflection of light was investigated with ultraviolet/visible (UV/Vis). Their structure–mesomorphism relationships were discussed. M₁ and P₁ all showed a chiral smectic C (SmC*) phase. M₂ and M₃ revealed a SmC* phase and cholesteric phase, while their corresponding polymers P₂ and P₃ revealed a SmC* phase and smectic A (SmA) phase. M₄ only exhibited a cholesteric phase, whereas the corresponding polymers P₄ showed a SmA phase. Moreover, the selective reflection of light shifted to the long-wavelength region at the SmC* phase range and to the short-wavelength region at the cholesteric range with increasing temperature, respectively. The results seemed to demonstrate that the tendency towards melting temperature (T_m), glass transition temperature (T_g), isotropic temperature (T_i) and mesophase range for the monomers and polymers increased by increasing the mesogenic core rigidity or the number of phenyl ring. The polymerisation effect could lead to higher liquid crystalline to isotropic phase transition temperature, wider mesophase range and more ordered smectic phase formed. In addition, all the obtained polymers had a very good thermal stability and the corresponding T_d increased by increasing the number of phenyl ring.     

Synthesis, micro structure, and thermal stability of side chain liquid crystalline polysiloxane polymers with an oligo (ethylene oxide) unit in the side chain

A series of new alkene monomers [MS3BDBEn, n=1-3] containing 4-oligo (ethylene oxide) monomethyl ether 4-biphenyl ether carboxyl benzoate as terminal groups were synthesized. These polymers were prepared by grafting these monomers onto the poly (methylhydrosilox-ane) (PMHS) backbone. The transition temperatures, liquid crystalline textures, and thermal stability of the polysiloxane polymers have been determined by thermal data, by optical texture, and by X-ray diffraction patterns. Polymers PS3BDBEn showed smectic or smectic and nematic phases which were not analogous to their precursor nematic monomers. The terminal length of the polymers affects not only the mesophase transition temperatures but also the layer-spacing length (d₁) and the side-chain distance (d₂). The long- and short-range orders can remain to some extent above the isotropization temperature and below the melting point. The polymer PS3BDBE3 decomposed in air 20°C above the isotropization temperature and lost its short range orders as detected by the X-ray diffraction analysis.     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Synthesis and phase behavior of side‐chain liquid‐crystalline polymers containing malachite green lactone groups

New side‐chain liquid‐crystalline polymers containing both cholesteric and thermochromic side groups were synthesized. Their chemical structures were confirmed with elemental analyses and Fourier transform infrared, proton nuclear magnetic resonance, and carbon‐13 nuclear magnetic resonance spectra. The mesogenic properties and phase behavior were investigated with differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The effect of the concentration of dye side groups on the phase behavior of the polymers was examined. The polymers showed smectic or cholesteric phases. Those polymers containing less than 20 mol % dye groups had good solubility, reversible phase transitions, wider mesophase temperature ranges, and higher thermal stability. The experimental results demonstrated that the isotropization temperature and mesophase temperature ranges decreased with an increasing concentration of dye groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3870–3878, 2004     

Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Synthesis and characterization of novel thermotropic liquid crystalline copoly(ester imide)s

Novel liquid crystalline copoly(ester imide)s were synthesized via polyesterification of triethyleneglycol bis(4-carboxyphenyl) ether ( 1e ), diacetoxybiphenyl, and diacids with imide moieties. The effects of composition on the changes of T_g, T_m, and T_i were examined by global TSC and DSC. Thermal gravimetric analyses (TGA) found that 4a–d and 5a–g possess higher thermal stability. Strong stir opalescence phenomenon and observations from polarized optical microscopy identified that 2b–e and 3a–d possess the typical schlieren texture of an enantiotropic nematic mesophase. The birefrigent melts of 4a–d and 5a–g, however, displayed particular liquid crystalline behavior. Copolymers with higher aromatic imide ring content ( 4a–d, 5a–g ) form a layered structure and an enantiotropic smectic mesophase in the melting state. The melt viscosity of the semetic mesophase was higher than the nematic mesophase which was observed by capillary rheometer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1791–1803, 1998     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermal Expansion of Liquid Crystalline Polyesters Having Phenanthrene Moieties. Simultaneous DSC-XRD method

Phase transition process of polyester from phenanthrene, poly(oxyheptamethyleneoxy-2,7-phenantrenedicarbonyl), a main chain type liquid crystalline polymer, was investigated by simultaneous DSC-XRD measurements using the synchrotron radiation facility (PF). Three exothermic DSC peaks were observed during cooling from the isotropic liquid state. These DSC peaks were assigned to the transition from the isotropic liquid to the smectic A, that from the smectic A to C, and that from the smectic C to the crystalline state, respectively, as determined by XRD profiles. The rate of transition from the smectic A to C was very slow compared with the liquid crystalline transition and the crystallization. From the DSC-XRD results, the thermal expansion along c-axis in the crystal and smectic phases are 4.1×10⁻⁴ and 1.4×10⁻³ nm K⁻¹ , respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and liquid crystal properties of new cyclic carbonate monomers functionalised with cholesteryl moiety

ABSTRACT

Four new liquid crystal cyclic carbonate monomers M₁–M₄, with cholesteryl moiety and flexible spacer of different lengths, were synthesised through coupling reaction. The chemical structures, mesophase properties and thermal behaviour of the monomers were characterised with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy (¹H NMR), polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. Based on these results, the relationship between the number of methylene groups into flexible chain and the mesomorphism of the monomers was investigated. It was found that all the monomers showed a focal conic texture of a smectic A phase and exhibited an interdigitated molecular arrangement. Moreover, the glass transition temperature and the isotropisation temperature of the monomers except M₁ decreased, and the mesophase range narrowed as the number of methylene units into the flexible chain increased.     

Synthesis and characterization of fluorine-containing cholesteric liquid crystalline polysiloxanes bearing trifluoromethyl-substituted mesogens

A series of side-chain liquid crystal (LC) polysiloxanes were synthesised with Poly(methylhydrogeno)siloxane, 4?-(undec-10-enoyloxy) biphenyl – 4 – yl 4- (trifluoromethyl) benzoate (M_th) and a chiral nematic (N*) LC monomer 1-allyl 10-(cholesteryl)-decanedioate (M_ch). The chemical structures and LC properties of the monomers and polymers were characterised by FTIR, ¹H-NMR, differential scanning calorimetry, thermogravimetric analysis, POM and X-ray diffractometer. M_ch is monotropic N* LC. The homopolymer derived from monomer M_ch is enantiotropic N* LC. Monomer M_th is a smectic A liquid crystal. The copolymers derived from M_ch and M_th are N* LCs. The temperatures at which 5% weight loss occurred are greater than 300°C for all the fluoro-containing polymers, and the residue weights of the samples at 600°C increased slightly as the content of trifluoromethyl mesogens increased in the polymers. The glass transition temperatures of the polymers increased as trifluoromethyl mesogens increased, too. The N*–I phase transition temperatures show a negative deviate from ideal or linear behaviour. The values of the enthalpy changes for the cholesteryl containing polymers are rather low and this is attributed to the biaxiality of cholesteryl moiety which tends to reduce the change in the orientational order at the N*–I transition. Compared to the monomers, the polymers show wider mesophase region.     

Synthesis,structure and properties of new chiral liquid crystalline monomers and homopolysiloxanes containing menthyl groups

The synthesis is described of four new chiral liquid crystalline monomers (M₂–M₅ ) and their corresponding side‐chain homopolysiloxanes (P₂–P₅ ) containing menthyl groups. Chemical structures were characterised using FT‐IR or ¹H NMR spectra, and specific optical rotations were evaluated with a polarimeter. The phase behaviour and mesomorphic properties of the new compounds were investigated by differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy, UV/visible/NIR spectrocopy and X‐ray diffraction. The monomers and homopolymers with more aryl segments showed noticeably lower specific optical rotation value. The monomers M₂–M₅ formed a cholesteric or blue phase when a flexible spacer was inserted between the rigid mesogenic core and the terminal menthyl groups by reducing the steric effect. M₂–M₅ revealed enantiotropic cholesteric phase. Moreover, M₂ also exhibited a monotropic smectic A (SmA) phase, and M₄ also exhibited a cubic blue phase on cooling. The selective reflection of light shifted to the long wavelength region with increasing rigidity of the mesogenic core for M₂–M₅ . P₂–P₅ exhibited SmA phases, and the mesogenic moieties were ordered in smectic orientation with their centres of gravity in planes. Melting or glass transition temperature and the clearing temperature increased, and the mesophase temperature range widened with increasing rigidity of the mesogenic core.     

Synthesis and crosslinking of polyethers that have mesogenic cores and propargyl groups

We modified poly(epichlorohydrin) (PECH) with biphenyl carboxylic and naphthalene carboxylic acid derivatives which contains propargyloxy moieties. The linear polymers were characterized by NMR and IR spectroscopy, elemental analysis, DSC and TGA. We obtained only one side chain liquid crystalline. A smectic A mesophase of this biphenyl derivative was identified by DSC, light polarized optical microscopy and X‐ray diffraction. Thermal crosslinking of the aryl propargyl ether group via sigmatropic rearrangement took place while the material was in the isotropic phase. Partially curing this reactive liquid crystalline polymer resulted in the formation of an anisotropic elastomer when the curing was radically initiated in the range of mesophase stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3883–3892, 2002     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Synthesis and characterization of mesogen‐jacketed liquid‐crystal polymers based on 2,5‐bis(4′‐alkoxyphenyl)styrene

A series of novel mesogen‐jacketed liquid‐crystal polymers, poly[2,5‐bis(4′‐alkoxyphenyl)‐styrene] (P‐n, n = 1–11), were prepared via free‐radical polymerization of newly synthesized monomers, 2,5‐bis(4′‐alkoxyphenyl)styrene (M‐n, n = 1–11). The influence of the alkoxy tail length on the liquid‐crystalline behaviors of the monomers and the polymers was investigated with differential scanning calorimetry (DSC), thermogravimetry, polarized optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). The monomers with n = 1–4, 9, and 11 were monotropic nematic liquid crystals. All other monomers exhibited enantiotropic nematic properties. Their melting points (T_m's) decreased first as n increased to 6, after which T_m increased slightly at longer spacer lengths. The isotropic–nematic transition temperatures decreased regularly with increasing n values in an odd–even way. The glass‐transition temperatures (T_g's) of the polymers first decreased as the tail lengths increased and then leveled off when n ≥ 7. All polymers were thermally stable and entered the mesophase at a temperature above T_g. Upon further heating, no mesophase‐to‐isotropic melt transition was observed before the polymers decomposed. WAXD studies indicated that an irreversible order–order transition for the polymers with short tails (n ≤ 5) and a reversible order–order transition for those with elongated tails (n ≥ 6) occurred at a temperature much higher than T_g. However, such a transition could not be identified by POM and could be detected by DSC only on heating scans for the polymers with long tails (n ≥ 7). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1454–1464, 2003     

Tailoring the liquid crystalline property via controlling the generation of dendronized polymers containing azobenzene mesogen

The first‐ and second‐generation dendronized polymers containing azobenzene mesogen were designed and successfully synthesized via free radical polymerization. The chemical structures of the monomers were confirmed by elemental analysis, ¹H NMR, and ¹³C NMR. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatography. The phase structures and transition behaviors were studied using differential scanning calorimetry, polarized light microscopy, and small‐angle X‐ray scatter experiments. The experiment results revealed that the first‐generation dendronized polymer exhibited liquid crystalline behavior of the conventional side‐chain liquid crystalline polymer with azobenzene mesogen, that is, the polymer exhibited smectic phase structure at lower temperature and nematic phase structure at higher temperature. However, the second‐generation dendronized polymers exhibited more versatile intriguing liquid crystalline structures, namely smectic phase structure at lower temperature and columnar nematic phase structure at higher temperature, and moreover, the phase structure still remained before the decomposition temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1149–1159, 2010     

New insights into the transitional behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside using variable temperature FTIR spectroscopy and X-ray diffraction

The liquid crystalline behaviour of methyl-6-O-(n-dodecanoyl)-α-D-glucopyranoside, 1, has been characterised using X-ray diffraction and variable temperature Fourier transform infrared (FTIR spectroscopy). 1 exhibits a monotropic interdigitated smectic A phase consisting of bilayers in which the alkyl chains are overlapped. The crystal–isotropic transition is accompanied by a pronounced decrease in the strength of the hydrogen bonding network involving the sugar groups resulting in a marked change in the environment of the alkyl chains. The isotropic phase consists of disordered smectic-like domains stabilised via hydrogen bonding between the sugar groups. At the transition to the smectic A phase, a subtle change in hydrogen bonding is observed which is manifested by a change in the temperature dependence of the OH stretching peak position in the FTIR spectrum. On crystallisation, the strong hydrogen bonding network is re-established accompanied by a change in the conformational distribution of the alkyl chains. A model is proposed in which a combination of hydrogen bonding (enthalpic effects) and conformational arrangements (entropic effects) promotes initially the formation of smectic-like domains in the isotropic phase and subsequently stabilises the smectic A phase by inhibiting the microphase separation leading to the crystal phase.     

Main chain thermotropic liquid crystalline polyurethanes containing biphenyl mesogens based on novel AB‐type self‐polycondensation route: FT‐IR and XRD studies

The detailed mesophasic characterization of main chain liquid crystalline polyurethanes containing biphenyl mesogen, which were synthesized by the novel AB‐type self‐polycondensation approach, was carried out by using Differential Scanning Calorimetry (DSC), Polarized Optical Microscopy (POM), variable temperature X‐ray Diffraction (XRD), and Fourier Transform Infrared (FT‐IR) spectroscopic studies. The type of mesophase present in these polymers was identified to be the smectic A phase by POM and XRD studies. The smectic layer thickness was found to increase as the length of the spacer increased. The effect of temperature on the hydrogen bonding was analyzed by FT‐IR studies. The curve‐fitting analysis of the NH stretching and C?O stretching modes of vibrations indicated a gradual decrease in hydrogen bonding during the transition from the crystalline state to the mesophase. The mesophase to isotropic liquid transition was then accompanied by the complete disappearance of the hydrogen bonding. The biphenyl bands also showed changes during phase transitions due to the coupling of biphenyl vibration modes with the urethane linkage attached to it. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1903–1912, 2005     

Obituary: Professor Frank M. Leslie FRS (1935-2000)

The synthesis of five new cholesteryl-based monomers (M-1?M-5) and the corresponding smectic comb-like polymers containing cholesteryl groups (P-1?P-5) is presented. The chemical structures were characterised by FT-IR, 1H NMR and elemental analyses. The specific optical rotations were evaluated with a polarimeter. The phase behaviour was investigated by polarising optical microscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction. The specific optical rotation values of these monomers and polymers with the same number of phenyl rings and terminal groups were nearly equal; however, they decreased with increasing the aryl numbers in the mesogenic core. The monomers M-1?M-5 showed oily streak and focal conic optical textures, or finger print textures characteristic of the chiral nematic phase. The polymers P-1?P-5 showed the smectic A phase. The melting, clearing, and glass transition temperatures increased, and the mesophase temperature ranges widened with increasing the aryl number in the mesogenic core. However, although the molecular structures of M-4 and M-5 were similar to those of M-3, namely their mesogenic cores contained three phenyl rings, their phase behaviour differed considerably, and T _m and T _i of M-4 and M-5 were less than those of M-3. In addition, M-4 and M-5 showed a clear glass transition similar to the polymer. Furthermore, the ester linkage bond and aryl arrangement in the mesogenic core also affected the phase behaviour.     

Volumetric,dielectric, calorimetric and X-ray studies of smectogenic 10PBO8 at atmospheric and elevated pressures

The synthesis and pressure–volume–temperature (PVT), differential thermal analysis (DTA), dielectric and X-ray diffraction data of 2-(4-octylcarbonyloxyphenyl)-5-decylpyrimidine (10PBO8) are presented. The substance exhibits two crystalline and smectic C (SmC) phases on heating and a SmC–monotropic crystalline smectic B (SmB_cr) SmB_cr–crystal sequence of phase transitions on cooling. Above ca. 15 MPa, the SmB_cr phase becomes enantiotropic (reversible polymorphism). The phase behaviour and molecular dynamics in the liquid crystalline phases are analysed and discussed, with the conformational component of the total entropy for the SmC–isotropic liquid transition estimated. We also calculate from the PVT results the potential parameter characterising the steepness of the interaction potential.     

光致变色液晶高分子研究(Ⅳ)─含苯甲酸－4－甲氧基苯酯介晶基元和偶氮苯光色基元侧链共聚硅氧烷的液晶行为

用热台偏光显微镜和DSC法研究了含苯甲酸-4-甲氧基苯酯介晶基元和偶氮苯光色基元侧链共聚硅氧烷(PSⅡ)的液晶性。将非介晶基元并入液晶均聚物PSⅡ-1,共聚物PSⅡ-2、PSⅡ-3的液晶态类型不变,PSⅡ-4仅存在近晶相,PSⅡ-5～8无双折射现象,保持共聚物液晶性的最低含介晶基元单体的极限摩尔含量为80%.在液晶共聚物中,非介晶基组分含量增加时,其T_m、ΔH_m和ΔS_m降低;非介晶组分在10mol%时,T_i、ΔH_i和ΔS_i具有最小值。