Indium-mediated vic-diallylation/propargylation of phenacyl bromides: a facile synthesis of 4-arylocta-1,7-dien-4-ol derivatives

Phenacyl bromides undergo smooth vic-diallylation and dipropargylation with allyl and propargyl indium reagents generated in situ from metallic indium and allyl or propargyl bromide to produce 4-arylocta-1,7-dien-4-ol derivatives in good yields. Phenacyl chloride and azide also participated effectively in bis-allylation. Similar results are also obtained from in situ generated allyl or propargyl zinc bromide.     

Synthesis and photochemical reaction of novel p-alkylcalix[n]arene derivatives containing cationically polymerizable groups

New photoreactive p-methylcalix[6]arene (MCA) derivatives containing cationically polymerizable groups such as propargyl ether (calixarene 1), allyl ether (calixarene 2), and ethoxy vinyl ether (calixarene 3) groups were synthesized with 80, 74, and 84% yields by the substitution reaction of MCA with propargyl bromide, allyl bromide, and 2-chloroethyl vinyl ether (CEVE), respectively, in the presence of either potassium hydroxide or sodium hydride by using tetrabutylammonium bromide (TBAB) as a phase transfer catalyst (PTC). The p-tert-butylcalix[8]arene (BCA) derivative containing ethoxy vinyl ether groups (calixarene 4) was also synthesized in 83% yield by the substitution reaction of BCA with CEVE by using sodium hydride as a base and TBAB as a PTC. The MCA derivative containing 1-propenyl ether groups (calixarene 5) was synthesized in 80% yield by the isomerization of calixarene 2, which contained allyl ether groups, by using potassium tert-buthoxide as a catalyst. The photochemical reactions of carixarene 1, 3, 4, 5, and 6 were examined with certain photoacid generators in the film state. In this reaction system, calixarene 3 containing ethoxy vinyl ether groups showed the highest photochemical reactivity when bis-[4-(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) (DPSP) was used as the catalyst. On the other hand, calixarene 1 containing propargyl ether groups had the highest photochemical reactivity when 4-morpholino-2,5-dibuthoxybenzenediazonium hexafluorophosphate (MDBZ) was used as the catalyst. It was also found that the prepared carixarene derivatives containing cationically polymerizable groups such as propargyl, allyl, vinyl, and also 1-propenyl ethers have good thermal stability. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1805–1814, 1999     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003     

Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Investigation of microwave energy to cure carbon fiber reinforced phenylethynyl-terminated polyimide composites,PETI-5/IM7

The application of microwave energy to the processing of carbon fiber reinforced phenylethynyl-terminated polyimide composites (PETI-5/IM7) was investigated and evaluated with a variable-frequency microwave furnace. The thermal and physical properties of the composites were measured by dynamic mechanical thermal analysis, thermogravimetric analysis, thermomechanical analysis, and density and composition tests. The mechanical properties were determined by 3-point-bending and short-beam-shear tests at both room temperature and 177 °C. The shear failure surfaces of both microwave- and thermally cured composites were detected with environmental scanning electron microscopy. A comparison of the thermal and microwave processes was conducted to evaluate the advantage of the microwave process. Microwave-cured composites, fabricated under various pressures at the fixed process temperatures, also were investigated. From these studies, it was concluded that microwave energy successfully was used to fabricate PETI-5/IM7 composites with higher glass-transition temperatures (by 11–16 °C) and higher retention in flexural strength, flexural modulus, and shear strength at 177 °C than those fabricated by the thermal process. Furthermore, the microwave processes required only half the time used for the standard thermal process. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4616–4628, 1999     

Novel propargyl‐substituted azo‐coupled phenolic resins

Novel propargyl that contains phenolic resins via azo‐coupling reaction was synthesized. Peculiarities of curing process were investigated by differential scanning calorimetry analysis. Polymerization of resins with azo groups was estimated to be affected by radicals obtained at resin decomposition causing 10°C peak shift to lower temperatures in comparison with resin containing only propargyl group. At the same time, polymerization of triple propargyl bond was shown to not proceed at radical initiation until Cleisen rearrangement and chromene formation. Thermogravimetric analysis revealed increase of thermal stability by 170–190°C and char yield by up to 20% for modified resins in comparison with original novolac resin. Heat deflection temperature estimated by dynamic mechanical analysis was also shown to be increased by at least 110°C for modified resins in comparison with novolac resin. All the synthesized resins are soluble in acetone and used for preparation of unidirectional glass fiber‐based composites. Flexural strength and modulus for modified resins‐based composites were shown to increase by at least 25% and 10% correspondingly in comparison with novolac‐based composite. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Preparation,characterization, and polymerization of maleimidobenzoxazine monomers as a novel class of thermosetting resins

New series of benzoxazine‐based monomers, namely maleimidobenzoxazines, were prepared with hydroxyphenylmaleimide, formalin, and various amines (e.g., aniline, allylamine, and aminophenyl propargyl ether). The structure of the novel monomers was confirmed by IR, ¹H NMR, and elemental analysis. The monomers were easily dissolved in many common organic solvents. Differential scanning calorimetry of the novel monomers showed exotherms at different temperature ranges that corresponded to the polymerization regime of benzoxazine and maleimide along with other functionalities such as allyl or propargyl, if any. IR was studied to follow the progress of the curing reaction of maleimidobenzoxazine after various thermal treatments. The thermal cure of the monomers at 250 °C afforded a novel network structure that combined polybenzoxazine and polymaleimide. The dynamic mechanical analyses showed that the storage moduli of the thermosets derived from maleimidobenzoxazine were kept constant up to high temperatures. The glass‐transition temperatures were as high as 241–335 °C. Moreover, thermogravimetric analyses revealed that the thermosets did not show any weight loss up to about 350 °C, with char yields ranging from 62 to 70% at 800 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1424–1435, 2006     

Synthesis and cyclopolymerization of novel allyl‐acrylate quaternary ammonium salts

Novel allyl‐acrylate quaternary ammonium salts were synthesized using two different methods. In the first (method 1), N,N‐dimethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium bromide and N,N‐dimethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide were formed by reacting tertiary amines with allyl bromide. The second (method 2) involved reacting N,N‐dialkyl‐N‐allylamine with either ethyl α‐chloromethyl acrylate (ECMA) or tert‐butyl α‐bromomethyl acrylate (TBBMA). The monomers obtained with the method 2 were N,N‐diethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride, N,N‐diethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide, and N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride. Higher purity monomers were obtained with the method 2. Solution polymerizations with 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) in water at 60–70°C gave soluble cyclopolymers which showed polyelectrolyte behavior in pure water. Intrinsic viscosities measured in 0.09M NaCl ranged from 0.45 to 2.45 dL/g. ¹H‐ and ¹³C‐NMR spectra indicated high cyclization efficiencies. The ester groups of the tert‐butyl polymer were hydrolyzed completely in acid to give a polymer with zwitterionic character. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 901–907, 1999     

Copolymerization of acrylamide with allyl-acrylate quaternary ammonium monomers

A series of copolymers of N,N-morpholine-N-2-(ethoxycarbonyl)allyl allyl ammonium chloride, N,N-morpholine-N-2-(ethoxycarbonyl)allyl allyl ammonium bromide, N,N-piperidyl-N-2-(ethoxycarbonyl)allyl allyl ammonium chloride, N,N-morpholine-N-2-(t-butoxycarbonyl)allyl allyl ammonium bromide and diallyldimethylammonium chloride (DADMAC) with acrylamide (AAm) were prepared in water at 50-56°C using 2,2'-azo-bis(2-amidinopropane)dihydrochloride (V-50). The ethyl ester monomers showed high cyclization efficiencies during copolymerizations. The tert-butyl ester derivatives showed high cross-linking tendencies. The molar fractions of allyl-acrylate monomers in the AAm: allyl-acrylate copolymers were higher than the one of DADMAC in the AAm:DADMAC copolymers. The intrinsic viscosities of the copolymers measured in 0.09 M NaCl ranged from 2.5 to 7.5 dL/g.     

7α-alkylation, 7,7-bisalkylation,and reduction of the 20-oxo group of poststerone in reactions with alkyl halides in lithium–ammonia solution

Reactions of poststerone with methyl iodide, allyl bromide, and propargyl bromide in lithium–ammonia solution resulted in its completely stereoselective 7α-alkylation accompanied by reduction of the 20-oxo group with formation of equimolar amounts of 20R- and 20S-hydroxy derivatives. The reaction of poststerone with excess allyl bromide afforded 7,7-bis-allyl 20R- and 20S-alcohols at a ratio of 3: 1. The reduction of the 20-oxo group in the alkylation of poststerone with excess propargyl bromide led to the formation of an equimolar mixture of Δ⁸⁽¹⁴⁾- and Δ⁸⁽⁹⁾-isomers with exclusive S configuration of C²⁰.     

Structure and dynamics of carbon black‐filled elastomers

The linear and nonlinear melt viscoelastic properties for a series of carbon black‐filled polymer composites were studied. Complementary tapping‐mode atomic force microscopy (AFM) studies were used to examine the dispersion and structural correlations of the filler particles in these composites. The low‐frequency dependence of the linear viscoelastic moduli gradually changes from liquidlike behavior for the unfilled polymer to pseudosolid character for composites with more than 9 vol % carbon black filler. The plateau modulus, inferred from the linear viscoelastic response, exhibits a somewhat discontinuous change at about 9 vol % filler. On the basis of the linear viscoelastic response, we postulate that the carbon black filler forms a continuous percolated network structure beyond 9 vol % filler, considerably lower than that expected from theoretical calculations for overlapping spheres and ellipsoids. We suggest that the lower threshold for percolation is due to the polymer mediation of the filler structure, resulting from the low functionality of the polymer and, consequently, few strong polymer–filler interactions, allowing for long loops and tails that can either bridge filler particles or entangle with one another. Furthermore, the strain amplitude for the transition from linear behavior to nonlinear behavior of the modulus for the composites with greater than 9 vol % filler is independent of frequency, and this critical strain amplitude decreases with increasing filler concentration. Complementary AFM measurements suggest a well‐dispersed carbon black structure with the nearest neighbor distance showing a discontinuous decrease at about 9 vol % filler, again consistent with the formation of a filler network structure beyond 9 vol % carbon black. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 256–275, 2001     

Mechanical properties of plasma‐treated carbon fiber reinforced PTFE composites with CNT

This paper is concerned with the effects of the plasma surface treatment and the addition of CNT on the mechanical properties of carbon fiber/polytetrafluoroethylene (PTFE) composite. The tensile and flexural strength of composites containing CNT and plasma‐treated carbon fibers improved. The flexural strength first decreases with respect to the CF content. The flexural strength increases to 179 MPa for the plasma‐treated composite as compared with 167 MPa for the neat carbon fiber composites. The overall improvement is thus nearly 8%.     

Cyclocopolymerization of allyl‐acrylate quaternary ammonium salts with diallyldimethylammonium chloride

A series of copolymers of N,N‐dialkyl‐N‐2‐(methoxycarbonyl)allyl allyl ammonium chloride, N,N‐dialkyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride, and N,N‐dialkyl‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide with diallyldimethylammonium chloride (DADMAC) were prepared in water at 60 °C with 2,2′‐azo‐bis(2‐amidinopropane)dihydrochloride. A strong effect of ester substituents on cyclopolymerization was observed. The methyl and ethyl ester monomers showed high cyclization efficiencies during homopolymerizations and copolymerizations. Unexpectedly, the t‐butyl ester derivatives showed high crosslinking tendencies. Water‐soluble copolymers were obtained only with a decrease in the molar fraction of t‐butyl ester monomer below 30%. Relative reactivities of the allyl‐acrylate monomers in photopolymerizations were compared with the relative reactivity of DADMAC. Allyl‐acrylate monomers were much more reactive than DADMAC; the photopolymerization rate decreased in the following order: N,N‐morpholine‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide > N,N‐piperidyl‐N‐2‐(t‐butoxycarbonyl)allyl allyl ammonium bromide > N,N‐dibutyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride > N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride ∼ N,N‐morpholine‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride ∼ N,N‐piperidyl‐N‐2‐(methoxycarbonyl)allyl allyl ammonium chloride > N‐methyl‐N‐butyl‐N‐2‐(ethoxycarbonyl)allyl allyl ammonium chloride. Intrinsic viscosities of the polymers measured in 0.09 M NaCl ranged from 1.06 to 3.20 dL/g. The highest viscosities were obtained for copolymers of the t‐butyl ester monomers with piperidine and morpholine substituents. The copolymer of the t‐butyl ester with piperidine substituent and DADMAC was hydrolyzed in acid to give a polymer with zwitterionic character. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 640–649, 2001     

Thermal actuation of hydrogels from PNIPAm,alginate, and carbon nanofibres

Composite ionic‐covalent entanglement (ICE) hydrogel networks were prepared from poly(N‐isopropylacrylamide), alginate, and carbon nanofibres. An optimised triple network hydrogel with 86% water content exhibited a compressive strength of 3.0 ± 0.1 MPa and 66 ± 13 mS/cm electrical conductivity. Thermal actuation was shown to have a shorter response time for gels containing nanofibres, compared to those which did not and hydrogel samples more than halved in volume within 1 minute when placed in a 60 °C water bath. Controlled dye release was demonstrated as a potential application and used to further quantify thermal actuation over short times. Joule heating techniques were used to electronically actuate the hydrogel samples, removing the traditional requirements for immersion in a temperature controlled liquid. It is expected that devices based on these materials will find potential applications in soft robotics and micro fluidics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 46–52     

Allyl ether of aralkyl phenolic resin with low melt viscosity and its Alder‐ene blends with bismaleimide: synthesis,curing, and laminate properties

This paper outlines the synthesis and characterization of O‐allyl aralkyl phenolic (O‐allyl Xylok, OAX) resins having low melt viscosity and its Alder‐ene blends with 2, 2′‐bis 4‐[(4′‐maleimido phenoxy) phenyl] propane. The blends manifested a three‐stage curing pattern that converged to a two‐stage pattern on enhancing the maleimide content. The polymerization kinetics of typical allyl and maleimide rich resin systems showed apparent activation energy increasing and pre‐exponential factor decreasing from ene to the Diels–Alder step. Increased allyl content improved mechanical and impact properties of the composites at ambient temperature, although it diminished the retention of interlaminar shear strength at elevated temperature. Increased maleimide content of the resin was conducive for the higher rigidity for the composite and its retention at elevated temperature. A substantial increase in T_g (from 153°C to 280°C) and thermal stability was observed with an increase in maleimide content. High allyl content resulted in improved mechanical properties thanks to better resin–reinforcement interaction as revealed from morphological analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface characteristic and cell response of CVD SiC coating for carbon/carbon composites used for hip arthroplasty

SiC coatings were applied on carbon/carbon composites by chemical vapor deposition for potential application in hip arthroplasty. The surface morphology, roughness, and wettability of the coatings were evaluated by scanning electron microscopy, laser confocal scanning microscope, and video‐based contact angle measuring device, respectively. The bonding strength between the coatings and carbon/carbon composites was analyzed by scratch testing. The cell responses to coatings were studied by analyzing the cell morphology and cell proliferation. The results showed that SiC coatings showed spherical morphology with a roughness of R_a = 1.0 ± 0.2 µm and a contact angle of 64.7 ± 4.0°. The coatings had lower surface roughness and better surface hydrophilicity compared with those of the uncoated carbon/carbon composites. A strong shear strength averaging 120.0 MPa between the coating and carbon/carbon composites was achieved. The cell culture experiments showed that cell spreading was improved, and cell proliferation was increased with the SiC coatings. It was demonstrated that CVD‐SiC‐coated carbon/carbon composites were good candidates as artificial hip joint materials. Copyright © 2012 John Wiley & Sons, Ltd.     

High performance carbon–carbon composites obtained by a two-step process from phthalonitrile matrix composites

Carbon–carbon composites (C/C) were produced from carbon fiber reinforced phthalonitrile (CFRP) matrix composites in a two-step impregnation–carbonization procedure. After graphitization at 1800 °C, the obtained C/C composites demonstrated highly crystalline structure and properties characteristic of composites derived from phenolic matrix CFRP by the industrial procedure: d = 1.73 g cm^?3, interlaminar shear strength was 14.1 MPa, compression strength was 139.8 MPa, and coefficient of friction was in the range 0.32–0.34.     

Dispersion polymerization of vinyl monomers in supercritical carbon dioxide in the presence of drug molecules: A one‐pot route for the preparation of controlled delivery systems

The polymerization of 1‐vinyl‐2‐pyrrolidone in supercritical carbon dioxide in the presence of ibuprofen as a model drug was investigated as a new one‐pot process for the preparation of polymer‐based drug delivery systems (DDSs). The composites were prepared at 65 °C and P = 31–42 MPa by changing the initial concentration of the drug and the concentration of a crosslinking agent and that of a hydrophobic comonomer. The effects of these parameters on the performances of the polymerization and on the in vitro release kinetics of ibuprofen were studied. In all the experiments, part of the drug was entrapped inside the polymer particles and dissolved more slowly with respect to the pure compound. Copolymerization with methyl methacrylate was the most effective route to obtain a DDS with sustained temporal release of the drug molecule. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7429–7446, 2008     

Post‐functionalization of perfluorophenyl ester‐functional acyclic diene metathesis polymer

The acyclic diene metathesis (ADMET) polymerization was utilized for the design of the ADMET polymer (M_n = 21,200 g/mol, M_w/M_n = 1.74) with pendant perfluorophenyl ester functionality using Grubbs first generation catalysis overnight in bulk at 80 °C. Next, a wide variety of functional groups, like benzyl, octyl, propargyl, allyl, and furfuryl was quantitatively incorporated to the ADMET polymer backbone through various amines using activated ester substitution reaction. The ADMET polymers studied in this work were characterized using ¹H, ¹³C, and ¹⁹F NMR, GPC and DSC and displayed a monomodal distribution and a rather broad polydispersity index in the range of ?1.33 to 1.90. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2593–2598