Understanding the effect of skin formation on the removal of solvents from semicrystalline polymers

The effect of glassy skin formation on the drying of semicrystalline polymers was investigated with a comprehensive mathematical model developed for multicomponent systems. Polymers with high glass‐transition temperatures can become rubbery at room temperature under the influence of solvents. As the solvents are removed from the polymer, a glassy skin can form and continue to develop. The model takes into account the effects of diffusion‐induced polymer crystallization as well as glassy–rubbery transitions on the overall solvent content and polymer crystallinity. A Vrentas–Duda free‐volume‐based diffusion scheme and crystallization kinetics were used in our model. The polymer–solvent system chosen was a poly(vinyl alcohol) (PVA)–water–methanol system. The drying kinetics of PVA films were obtained by gravimetric methods with swollen films with known water/methanol concentrations. The overall drying behaviors of the polymer system determined by our model and experimental methods were compared and found to match well. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3191–3204, 2005     

Dissolution mechanism of semicrystalline poly(vinyl alcohol) in water

Changes occurring in the degree of crystallinity and lamellar thickness distribution of poly(vinyl alcohol) (PVA) samples during dissolution in water were investigated. PVA samples of three different molecular weights were crystallized by annealing at 90, 110, and 120°C. The initial degrees of crystallinity measured by differential scanning calorimetry (DSC) and by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) varied from 43 to 60% and the average lamellar thicknesses measured by DSC ranged from 50 to 400 Å. PVA dissolution was followed at 25, 35, and 45°C from 30 s up to 195 min. Lamellar thicknesses were determined as a function of dissolution time using DSC. There was an initial drastic decrease in the degree of crystallinity, which leveled off to a fairly constant value before reaching zero by the time the polymer dissolved completely. Increase in molecular weight led to lesser number of crystals, but with larger average lamellar thickness, which were more stable in the presence of water. Increase in crystallization temperature or decrease in dissolution temperature led to larger average lamellar thickness. Based on these findings, a dissolution mechanism involving unfolding of the polymer chains of the crystal was proposed. © 1996 John Wiley & Sons, Inc.     

Study of the Drying Behavior of Poly(vinyl alcohol) Aqueous Solution

This paper deals with the drying behavior of poly(vinyl alcohol) aqueous solution containing an active substance and placed into a Petri box. The objective is to reduce the drying time while respecting some constraints. To succeed, it is important to understand complex mechanisms governing heat and mass transfers. During the drying, the product thickness shrinks and its properties evolve. Drying kinetics in convective and infrared radiation are presented.     

A model for charge transport in semicrystalline polymer thin films

A model for simulating the charge transport properties of semicrystalline polymer (SCrP) using Monte Carlo simulation is reinvented. The model is validated by reproducing the experimentally observed field and temperature dependence of mobility in Poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) thin films. This study also provides a new physical insight to the origin of much debated negative field dependence of mobility (NFDM) observed at low electric field strengths in P3HT thin films. The observed NFDM, which is not explainable with the mechanisms proposed earlier, is attributed to the weak dependence of transit time on the applied electric field strengths. In the semicrystalline films, the charge transport takes place mostly through the crystalline regions, in which the charge transport is weakly dependent on the strength of the applied electric field. In addition, a possible explanation for the origin of Arrhenius temperature dependence of mobility (lnμ ∝ 1/T) commonly observed in SCrP thin films is also proposed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 137–141     

聚乙烯醇(PVA)结晶的溶剂化效应

本文采用原子力显微镜和X射线粉末衍射仪研究了PVA溶液旋转涂膜的溶剂化效应。研究发现,随着DMSO（二甲基亚砜）／H2O的比例增加,膜表面形貌呈现规律性的变化。对薄膜的X射线衍射谱图分析表明,由于溶剂极性和溶剂中质子数的变化,导致薄膜内晶粒大小、结晶度不同,晶体结构的变化使得薄膜表面形貌也发生变化。     

Cooperative relaxations in semicrystalline fluoropolymers studied by thermally stimulated currents and ac dielectric

Semicrystalline fluoropolymers including poly(tetrafluoroethylene) (PTFE), a 8 mol % hexafluoropropylene (HFP)/92% TFE random copolymer (FEP), and poly(vinyl fluoride) (PVF) were studied using thermally stimulated current depolarization (TSC), ac dielectric, and other thermal analysis techniques. The TSC thermal sampling (TS) technique is emphasized here for the detection of broad and weak “cooperative” relaxations with all three of the polymers studied exhibiting two cooperative (i.e., relatively high apparent activation energy) transitions. The well-studied low-temperature γ relaxation in PTFE at ca. −100°C is characterized by this method as well as the γ relaxation in the less crystalline FEP sample. Higher temperature cooperative glass transitions, associated with constrained noncrystalline regions, are found at ca. 100°C in PTFE and ca. 80°C in FEP at TSC frequencies. Comparisons with relaxation studies of linear polyethylene are made, and the effects of crystallinity on the various transitions are discussed. The unique characterization by the TSC-TS technique in the detection of multiple “cooperative” relaxations, even in the case of overlapping transitions, is emphasized here. An example is the low-temperature relaxation in FEP. Two cooperative transitions were detected in PVF. The higher temperature one at ca. 45°C is the glass transition, as is well known in the literature. More information is needed to confirm the molecular origin and the effects of crystallinity and chemical structure on the low-temperature cooperative transition in PVF. © 1996 John Wiley & Sons, Inc.     

部分醇解聚乙烯醇接枝聚对二氧环己酮的合成与表征

制备了部分醇解的PVA(paPVA),将其与PDO在均相本体接枝聚合,通过对paPVA醇解度以及投料比的选择,得到了具有各种分子结构的接枝共聚物.通过一维核磁共振谱表征了聚合物的微观结构;采用TG、DSC等测试手段研究了接枝共聚物的热性能和结晶性能.     

Properties of Polyvinyl Alcohol Oligomers: A Molecular Dynamics Study

MD studies of liquid isopropyl alcohol and melts of short poly(vinyl alcohol) (PVA) oligomers are described. The specific volume was found to depend inversely on the number N of repeat units. If the chain length is enhanced, the viscosity of the PVA melt increases and the peaks in the radial distribution function become sharper. Additional peaks that appear in melts of PVA chains are of pure intramolecular origin. The calculated radius of gyration was found to depend on the number of formula units via . The orientation correlation functions showed that all molecular vectors of PVA melts with chain lengths N = 1, 2, 3 relax completely within a few nanoseconds. The relaxation times for the O H bond vector as obtained via the Kohlrausch‐Williams‐Watts expression showed an exponential dependence on the number of repeat units.

     

Conjugated vinyl derivatives of chitooligosaccharide: Synthesis and characterization

The introduction of a conjugated vinyl group to chitooligosaccharide (COS) has been easily accomplished by the coupling of glycidyl methacrylate (GMA) to COS in aqueous solution without an additional catalyst. Depolymerization of chitosan was carried out by deaminative cleavage using sodium nitrite. The average degree of polymerization of COS could be controlled by varying the molar ratio of sodium nitrite and the amino group of chitosan. The degree of substitution (percentage), as determined by ¹H NMR, of GMA to COS increased up to 60% at a reaction time of 48 h. The structure of products (COS‐GMAs) were identified by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR. The resulting COS‐GMAs were readily soluble in neutral water, like the original COS, and exhibited an excellent antimicrobial activity. The reactivity of COS‐GMA was investigated by the reaction with poly(vinyl alcohol) (PVA). The reaction products were found to have a lower crystallinity than PVA because of the introduction of the COS‐GMA units. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 880–887, 2001     

Design and fabrication of poly (glycerol sebacate)‐based fibers for neural tissue engineering: Synthesis,electrospinning, and characterization

Poly (glycerol sebacate) (PGS) is a thermoset biodegradable elastomer considered as a promising candidate material for nerve applications. However, PGS synthesis is very time and energy consuming. In this study, the PGS pre‐polymer (pPGS) was synthesized using three synthesis times of 3, 5, and 7 hours at 170°C. Fourier transform infrared (FTIR), nuclear magnetic resonance spectroscopy, X‐ray diffraction analysis, and differential scanning calorimetry thermogram were utilized to study the pPGS behavior. Poly (vinyl alcohol) was used as a carrier to fabricate aligned poly (vinyl alcohol)‐poly (glycerol sebacate) (PVA‐PGS) fibers with various ratios (60:40, 50:50, and 40:60) using electrospinning and crosslinked through the thermal crosslinking method. Morphology of the fibers was studied before and after crosslinking using scanning electron microscopy (SEM). FTIR, mechanical properties in the dry and wet state, water contact angle, in vitro degradation, and water uptake behavior of crosslinked scaffolds were also investigated. 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay, SEM analysis, and 4′, 6‐diamidino‐2‐phenylindole (DAPI) staining were utilized to determine the biocompatibility of scaffolds. The results show the synthesized pPGS in 3 hours at 170°C is the optimized sample in the terms of chemical reaction. All scaffolds have bead‐free and a uniform fiber diameter. The Young's modulus of crosslinked PVA‐PGS (50:50 and 40:60) fibers is shown to be in the expected range for nerve applications. The cell culture studies reveal PVA‐PGS (50:50 and 40:60) fibers could lead to better cell adhesion and proliferation. The results suggest that PVA‐PGS (50:50 and 40:60) is a suitable and promising biodegradable material in the fabrication of scaffolds for nerve regeneration.     

Energy storage and strain‐recovery processes in highly deformed semicrystalline poly(butylene terephthalate)

Nonelastic deformation of semicrystalline poly(butylene terephtalate) (PBT) was investigated by calorimetric measurements and strain‐recovery tests. Differential scanning calorimetry on PBT specimens deformed both below and above their glass‐transition temperature (T_g ≈ 50 °C) showed the presence of a broad exothermal peak whose area represents the energy released for the nonelastic strain recovery. This energy became more and more pronounced as the strain level increased, and it decreased as the deformation temperature increased, even if a significant contribution was detected on specimens deformed at temperatures much higher than T_g. For two temperature conditions (21 and 100 °C), strain‐recovery master curves were built showing the following two distinct deformation components: one recoverable with time and another one irreversible, this latter one arising from relatively low levels of strain. The recoverable component can be erased by heating the material at temperatures much higher than its T_g, close to the onset of the melting process. On the other hand, the irreversible strain component does not recover even if the material is brought close to the onset of the crystals melting. The shift factor for the strain‐recovery master curves was compared with the shift factor for the construction of the dynamic storage modulus master curve obtained in the linear viscoelastic regime (small strain). © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 236–243, 2002     

Study of the self‐diffusion of poly(ethylene glycol)s in poly(vinyl alcohol) aqueous systems

We have measured the self‐diffusion coefficients of a series of oligo‐ and poly(ethylene glycol)s with molecular weights ranging from 150 to 10,000, in aqueous solutions and gels of poly(vinyl alcohol) (PVA), using the pulsed‐gradient spin‐echo NMR techniques. The PVA concentrations varied from 0 to 0.38 g/mL which ranged from dilute solutions to polymer gels. Effects of the diffusant size and polymer concentration on the self‐diffusion coefficients have been investigated. The temperature dependence of the self‐diffusion coefficients has also been studied for poly(ethylene glycol)s with molecular weights of 600 and 2,000. Several theoretical models based on different physical concepts are used to fit the experimental data. The suitability of these models in the interpretation of the self‐diffusion data is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2396–2403, 1999     

Ultrasonic treatment as recent and environmentally friendly route for the synthesis and characterization of polymer nanocomposite having PVA and biosafe BSA‐modified ZnO nanoparticles

The present study deals with the immobilization of ZnO nanoparticles (NPs) as nanofiller inside poly(vinyl alcohol) (PVA) by solution casting method which is a low‐cost, environmental‐friendly, and rapid method of sonochemistry. Firstly, the surface of ZnO NPs was treated by bovine serum albumin (BSA) in the phosphate‐buffered solution under ultrasonic cavitation. Three diverse polymeric nanocomposites (NCs) are formed by changing the percentage of ZnO@BSA NPs (3, 6, and 9 wt%) with same amount of PVA. The structure properties, morphology, and thermal stability of prepared NCs were determined through Fourier transform‐infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy (EDX) and optical UV‐Visible spectrum, transmission electron microscopy (TEM), and field emission scanning electron microscopy. The presence and the dispersal of the ZnO@BSA NPs in the PVA matrix were recognized by TEM. In the X‐ray diffraction analysis, the values of mean particle size using Debye‐Scherrer equation were estimated in the range 4 to 6 nm that is almost in agreement with TEM analysis. Increase of 14% in thermal stability and also increase of more than 2‐fold of the tensile strength of PVA/ZnO@BSA NC 9 wt% in respect to the pure PVA showed that the modified NPs well dispersed within PVA and attached to it.     

Synthesis of Poly(Vinyl Alcohol) and/or Poly(Vinyl Acetate) Particles with Spherical Morphology and Core-Shell Structure and its Use in Vascular Embolization

Poly(vinyl alcohol), PVA, is the most frequently used material in embolization of tumors, aneurisms and arteriovenous malformations due to its low toxicity, good biocompatibility and desirable physical properties. It is well known that PVA particles cannot be prepared by direct polymerization of vinyl alcohol. Its synthesis is typically performed by the suspension polymerization of vinyl acetate to produce poly(vinyl acetate), PVAc, followed by the saponification of the PVAc particles. This work shows that, using the suspension polymerization technique, it is possible to obtain spherical particles with a core-shell structure of PVA/PVAc with regular morphology, instead of particles with irregular shapes and sizes, as usually found in many commercial embolization products. Therefore, this work presents the production of PVA/PVAc spherical particles that can be used to occlude blood vessels, eliminating the disadvantages of commercial PVA. In vivo clinical tests with white “New Zealand” rabbits undergoing kidney inflammation reaction have shown that these spherical particles are much more efficient for vascular embolization.     

Characterisation of Redox Initiators for Producing Poly(Vinyl Alcohol) Hydrogels

Summary: This work focuses on the characterisation of ascorbic acid/persulphate initiating system. Three different persulphates were used (ammonium, potassium and sodium), and a range of initiator concentrations were tested. Gel time, gel quality, initiator toxicity, and cell survival upon encapsulation were measured. No significant differences were observed between the three types of persulphates. Higher concentrations of the initiators resulted in faster gel times (5min for 0.05wt% initiator) and higher quality gels (less than 20% sol fraction), although the lower initiator concentrations were better in terms of cell growth inhibition and survival upon encapsulation. Overall, this system shows great promise for use in biomedical applications, however there is a need to minimise the initiator concentration to increase cell compatibility while maintaining a high enough concentration for adequate gel formation.     

Preparation of novel thermoplastic poly(vinyl alcohol) with improved processability for fused deposition modeling

In this work, thermoplastic poly (vinyl alcohol) (PVA) with improved processability for fused deposition modeling (FDM) was successfully prepared via intermolecular complexation and plasticization. The glycerol and water, which were non‐toxic and have a complementary structure with PVA, were adapted to realize FDM processing of PVA, thus providing a novel biomaterial with FDM processability. The result showed that the water and glycerol could interrupt hydrogen bonding in PVA and reduce the melting point of PVA to 127.4°C. Moreover, the water fraction of the plasticizer had a significant effect on the FDM processability and usability of the final parts. When the water fraction was greater than 75%, the PVA/plasticizer was unsuitable for FDM processing. However, when the water fraction was lower than 25%, the glycerol precipitated from the modified PVA. Thus, a mixture of 50% water and 50% glycerol was most suitable for FDM processing. A 0.3 mm layer thickness with a nozzle temperature of 175°C was chosen as the optimal processing condition for FDM using thermoplastic PVA. Finally, complex PVA parts with high dimensional accuracy, good mechanical properties, and designated structures were fabricated by FDM machine.     

Hydrophobically modified poly(vinyl alcohol) using alkoxy‐substituted methyl gallate: Synthesis and rheology

Hydrophobically modified poly(vinyl alcohol) (HMPVA) polymers were synthesized by potassium t‐butoxide‐catalyzed reaction of PVA with methyl 3,4,5‐tris(n‐octyloxy) benzoate (MGC₈)/3,4,5‐tris(n‐dodecyloxy) benzoate (MGC₁₂) and 1,3‐propane sultone. The concentration of 1,3‐propane sultone was kept constant at 10 mol % and that of MGC₈ (2, 3, and 4 mol %)/MGC₁₂ (2 and 3 mol %) was varied to obtain HMPVAs with different hydrophobic contents. The incorporation of MGC₈/MGC₁₂ and 1,3‐propane sultone onto HMPVA was confirmed by NMR spectroscopy. Rheological properties of aqueous solutions also confirmed the presence of hydrophobic and charged functional groups on HMPVAs. In the semidilute regime, the specific viscosity of HMPVAs followed concentration scaling that is typical of polyelectrolytes. At higher concentrations, the HMPVA solutions with 3 and 4 mol % of MGC₈ exhibited large increase in specific viscosity. Oscillatory experiments on these solutions exhibited gel‐like behavior at polymer concentrations of 40–50 g/L. Confocal microscopy images of HMPVA with 4 mol % of MGC₈ clearly indicated the existence of microgels. The tendency of formation of microgels further increased with increasing chain length of the hydrophobe, that is, with MGC₁₂. These samples exhibited rheological behavior that is typical of soft solids and was therefore probed by the strain‐rate frequency superposition technique reported recently in the literature. HMPVAs with improved rheological properties show potential applications as thickeners in cosmetic creams, lotions and as drug carriers in pharmaceutical formulations. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1054–1063, 2010     

MMTCA recognition by molecular imprinting in interpenetrating polymer network hydrogels based on poly(acrylic acid) and poly(vinyl alcohol)

A novel IPN hydrogel designed to recognize MMTCA is prepared by applying the molecular-imprinting method. The IPN is characterized by FT-IR, DSC, and SEM. Langmuir analysis shows that an equal class of adsorption is formed in the hydrogel. The adsorption equilibrium constant and the maximum adsorption capacity are evaluated, and the effect of the pH on MMTCA adsorption is discussed. The selectivity of the imprinted polymer for MMTCA is studied in aqueous solutions of MMTCA/aspirin/riboflavin. The results suggest that the MMTCA-imprinted polymer shows superior selectivity for MMTCA as compared to riboflavin and aspirin. The reproducibility of the imprinted polymer to MMTCA is also studied.     

Radiation effects on the thermal degradation of poly(vinyl chloride) and poly(vinyl alcohol)

Radiation effects on the formation of conjugated double bonds in the thermal degradation of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVA) were investigated. Thin films of PVC and PVA were either irradiated with γ-rays at ambient temperature (pre-irradiation) and then subjected to thermal treatment, or irradiated at elevated temperatures (in situ irradiation). An extensive enhancement of the thermal degradation was observed for the pre-irradiation of the PVC films, which was more effective than the effect of the in situ irradiation at the same absorption dose. For the PVA degradation, however, the effect of the in situ irradiation was larger than that of the pre-irradiation. The results were explained and related mechanisms were discussed based on radiation-induced chemical reactions and their individual contributions to the thermal degradation behaviors of the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3089–3095, 1998     

Electrically induced linear locomotion of polymer gel in air

A electromechanical gel, which could be driven in air by a DC electric field, was developed using poly(vinyl alcohol)/dimethylsulfoxide gel. When the applied electric field exceeds a certain threshold, the gel exhibited a continuous and linear crawling motion. The result indicated that, under the applied electric field of 275 V/mm, the maximum crawling velocity of the gel could reach v = 1.63 mm/s, which is about 80 times larger than that reported in earlier works. At a proper range of the driving time, the average crawling speed and crawling direction could be well controlled by the external electric field. Furthermore, some factors, which have influence on the critical driving electric field of the gel, such as the swelling degree of the gel and the apparent contact area between the gel and substrate, were studied. For the first time, a mechanism based on the strong electrostatic interaction between the external electric field and the charges accumulated in the gel–air and substrate–gel interfacial regions was put forward to explain the novel motion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1187–1197, 2007