Syntheses and radical polymerizations of novel optically active vinyl and isopropenyl carbamates having L-leucine structures

Syntheses and radical polymerizations of vinyl and isopropenyl carbamates having L -leucine methyl ester structures, N-vinyloxycarbonyl-L -leucine methyl ester (VOC-L-M) and N-isopropenyloxycarbonyl-L -leucine methyl ester (IOC-L-M), were carried out. VOC-L-M and IOC-L-M were prepared by the reactions of L -leucine methyl ester with vinyl and isopropenyl chloroformates in the presence of sodium hydrogen carbonate. The radical polymerization of VOC-L-M with AIBN (1 mol %) in bulk, chlorobenzene, methanol, and N,N-dimethylformamide afforded the corresponding polymer (poly(VOC-L-M)) with M _n 7,400–19,000. Meanwhile, IOC-L-M afforded no polymer with AIBN at 60°C but afforded a polymer having low molecular weight with BPO at 80°C. The glass transition temperatures of poly(VOC-L-M) and poly(IOC-L-M) were 53 and 65°C, respectively. The 10% weight loss temperatures of poly(VOC-L-M) and poly(IOC-L-M) under nitrogen were 255 and 173, respectively. The copolymerization parameters of VOC-L-M (M₁) and vinyl acetate (M₂) were evaluated as r₁ = 0.92 and r₂ = 0.63. © 1996 John Wiley & Sons, Inc.     

Syntheses and radical polymerizations of optically active (meth)acrylamides having amino acid moieties

Syntheses and radical polymerizations of several (meth)acrylamides having L -amino acid moieties were examined. The monomers were prepared by the reactions of L -amino acid ester hydrochlorides with (meth)acryloyl chloride in the presence of triethylamine in satisfactory yields. Radical polymerizations of the monomers were carried out in the presence of AIBN (1 mol %) in bulk and in several solvents to afford the corresponding polymers in satisfactory yield. The glass transition temperatures and specific rotations of the polymers depended on the substituents of the L -amino acid moieties. Nearly the same specific rotations were observed for the monomers and the model compounds of the polymer units, N-pivaloyl amino acid methyl esters. On the contrary, the specific rotations of the polymers shifted to the negative direction in ca. 30°. The interaction between the polymer side chains might affect the changes in the specific rotations from monomers to polymers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2619–2629, 1997     

Synthesis of trans‐4‐hydroxy‐L‐proline‐based telechelic prepolymers and poly(ester‐urethane)

The synthesis of hydroxyproline‐based telechelic prepolymers by the condensation polymerization of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline methyl ester was investigated. All the polymerizations were carried out in the melt with stannous octoate as the catalyst and with different diols. The products were characterized by differential scanning calorimetry, proton nuclear magnetic resonance, infrared spectrophotometry, and inherent viscosity (η_inh). According to the analytic results, the η_inh value of the prepolymers depended on the kind and amount of diols that were added. With an increase in the 1,6‐hexanediol feed from 2 to 10 mol %, there was a decrease in η_inh from 0.78 to 0.41 along with a decrease in the glass‐transition temperature (T_g ) from 63 to 42 °C. When 2 mol % of different kinds of diols were used, η_inh ranged from 0.78 to 0.21, and T_g varied from 70 to 43 °C. These new prepolymers could be linked to poly(ester‐urethane) by the chain extender 1,6‐hexamethylene diisocyanate. The poly(ester‐urethane) was amorphous, and the T_g was 76 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2449–2455, 2000     

Synthesis and reactions of a poly(methacrylate) from an optically active amino alcohol

Synthesis and radical polymerization of a novel optically active methacrylate, (S)–2–tert–butoxycarbonylamino–3–phenylpropyl methacrylate (MA–F–BOC), were examined. MA–F–BOC was synthesized from methacrylic acid and N–protected (L)–phenylalaninol. Radical polymerization of MA–F–BOC quantitatively afforded the corresponding polymethacrylate with a relatively high molecular weight. Radical copolymerizations of MA–F–BOC were carried out with styrene and acrylamide to afford the copolymers. Radical polymerization of MA–F–BOC in the presence of n–butanethiol afforded the oligomers, whose degrees of polymerizations were 3.3–8.0. The BOC group was completely cloven with HBr to afford the corresponding optically active polymeric amine quantitatively. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 1981–1986, 1998     

Synthesis and characterization of aromatic poly(ether ketone)s containing cyclotriphosphazene units

Bis(4-oxybenzoic acid) tetrakis(phenoxy) cyclotriphosphazene (IUPAC name: 4-[4-(carboxyphenoxy)-2,4,6,6-tetraphenoxy-1,3,5,2λ⁵,4λ⁵,6λ⁵-triazatriphosphinin-2-yl]oxy-benzoic acid) was synthesized and direct polycondensed with diphenylether or 1,4-diphenoxybenzene in Eaton's reagent at the temperature range of 80–120°C for 3 hours to give aromatic poly(ether ketone)s. Polycondensations at 120°C gave polymer of high molecular weight. Incorporation of cyclotriphosphazene groups in the aromatic poly(ether ketone) backbone greatly enhanced the solubility of these polymers in common organic polar solvents. Thermal stabilities by TGA for two polymer samples of polymer series ranged from 390 to 354°C in nitrogen at 10% weight loss and glass transition temperatures (T_g) ranged from 81.4 to 89.6°C by DSC. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1227–1232, 1998     

Size-Selective Encapsulation Property of Unimolecular Reverse Micelle Consisting of Hyperbranched D-Glucan Core and L-Leucine Ethyl Ether Shell

The synthesis of a unimolecular reverse micelle ( 3 ) consisting of hyperbranched D -glucan as the core and L -leucine ethyl ester as the shell was accomplished through the carbamation reaction of the hyperbranched D -glucan ( 1 ) with the N-carbonyl L -leucine ethyl ester ( 2 ) in pyridine at 100 °C. The polymer 3 was soluble in a large variety of organic solvents, such as methanol, acetone, chloroform, and ethyl acetate, and insoluble in water, which remarkably differed from the solubility of 1 . The solubilities of 3 were also changed by the substitution degrees of the L -leucine moiety. The encapsulation ability of 3 toward water-soluble dyes has been investigated. These results indicated that 3 was a unimolecular reverse micelle with an encapsulation ability toward hydrophilic dye molecules. In addition, 3 showed an molecular size-selective encapsulation ability.     

Chain‐growth condensation polymerization of 4‐aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium amide base

Chain‐growth condensation polymerization of p‐aminobenzoic acid esters 1 bearing a tri(ethylene glycol) monomethyl ether side chain on the nitrogen atom was investigated by using lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. The methyl ester monomer 1a afforded polymer with low molecular weight and a broad molecular weight distribution, whereas the polymerization of the phenyl ester monomer 1b at ?20 °C yielded polymer with controlled molecular weight (M_n = 2800–13,400) and low polydispersity (M_w/M_n = 1.10–1.15). Block copolymerization of 1b and 4‐(octylamino)benzoic acid methyl ester ( 2 ) was further investigated. We found that block copolymer of poly 1b and poly 2 with defined molecular weight and low polydispersity was obtained when the polymerization of 1b was initiated with equimolar LiHMDS at ?20 °C and continued at ?50 °C, followed by addition of 2 and equimolar LiHMDS at ?10 °C. Spherical aggregates were formed when a solution of poly 1b in THF was dropped on a glass plate and dried at room temperature, although the block copolymer of poly 1b and poly 2 did not afford similar aggregates under the same conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1357–1363, 2010     

NOTE: Synthesis and Characterization of a Poly(acrylamide) with Pendant 1,4-piperazine-2,5-dione Moieties via Post-polymerization Cyclization

A poly(acrylamide) was synthesized from N ^α -Boc-N ^? -acrolyl-l-lysylglycine methyl ester via radical polymerization. This polymer typically had Mn ～ 100,000 g/mol, Mw ～ 300,000 g/mol, and a T_g of 93°C. Removal of Boc with TFA and cyclization with DABCO? in DMSO at 65°C afforded a soluble piperazinedione-containing polymer that had a T_g of 157°C and thermal stability up to 300°C. These results demonstrate a viable and efficient synthetic route to piperazinedione-containing polyacrylamides of high molecular weight. Related polymers that incorporate substituted indane moieties could be useful high T_g materials for fabrication of LC and NLO devices.     

Linear polyamides from L‐malic acid and alkanediamines

A series of linear polyamides (PnMLM) derived from O‐methyl‐protected L ‐malic acid and 1,n‐alkanediamines with even n values ranging from 4 to 12 were prepared and fully characterized. L ‐Malic acid entered in the chain with a random orientation rendering essentially aregic polymers. PnMLM displayed optical rotation consistent with the content of the polymer in malic units, and they all were crystalline with melting points ranging from 158 to 188 °C and glass‐transition temperatures varying from 37 to 70 °C. PnMLM appeared to be fairly stable to heat with thermal decomposition starting close to 300 °C. Hydrolytic degradation of PnMLM at 37 °C was slow, but the process was significantly faster at 70 °C. Thermal degradation took place with the formation of cyclic malimides in the residual polymer and released the 1,n‐alkanediamine. However, hydrolytic degradation took place in a first stage with the formation of open chains of carboxylic‐ and amine‐ended oligomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1566–1575, 2004     

Synthesis and characterization of novel poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate

The melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline (N‐CBz‐Hpr) with cyclic carbonate [trimethylene carbonate (tri‐MC) or tetramethylene carbonate (tetra‐MC)] at a wide range of molar fractions in the feed produced new degradable poly(ester‐carbonate)s. The influence of reaction conditions such as polymerization time and temperature on the yield and inherent viscosity of the copolymers was investigated. The polymerizations were carried out in bulk at 140 °C with 1.5 wt % stannous octoate as a catalyst for 30 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, gel permeation chromatography, and Ubbelohde viscometry. The copolymers synthesized exhibited moderate molecular weights with rather narrow molecular weight distributions. The values of the glass‐transition temperature (T_g) of the copolymers depend on the molar fractions of cyclic carbonate. For the poly(N‐CBz‐Hpr‐co‐tri‐MC) system, with a decreased tri‐MC content from 93 to 16 mol %, the T_g increased from ?10 to 60 °C. Similarly, for the poly(N‐CBz‐Hpr‐co‐tetra‐MC) system, when the tetra‐MC content decreased from 80 to 8 mol %, the T_g increased from ?18 to 52 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐tri‐MC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐tri‐MC)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1435–1443, 2003     

Thermal polymerizations of alkali 4-(2-bromoethyl)benzoates in bulk

Thermal polymerizations of alkali 4-(2-bromoethyl)benzoates (2-BEBAs) were investigated. The polymerization of the lithium salt at 220°C for 2 h under reduced pressure in bulk, followed by esterification, produced poly(methyl 4-vinylbenzoate), having a number-average molecular weight (M̄_n) of 9500 in a 54% yield. Thus, elimination of hydrogen bromide to form a double bond occurred, followed by vinyl polymerization. In contrast, polymerization of the potassium salt at 200°C for 2 h afforded poly(oxycarbonyl-1,4-phenylene-ethylene) (polyester 1), having an inherent viscosity of 0.19 dL g⁻¹ in a 95% yield: i.e., polycondensation proceeded to afford the polyester. Reaction of the sodium salt at 220°C for 2 h produced polyester 1 having M̄_n of 4000 in a 28% yield as well as 4-vinylbenzoic acid in a 9% yield. In the reaction of the sodium salt, both polycondensation and double bond formation occurred. Thus, these polymerizations depended on the counter cations of 2-BEBAs. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2055–2060, 1999     

Anionic polymerization of N,N‐dialkyl‐2‐methylenebut‐3‐enamide: Effect of alkyl substituents on polymerization behavior

Anionic polymerizations of three 1,3‐butadiene derivatives containing different N,N‐dialkyl amide functions, N,N‐diisopropylamide (DiPA), piperidineamide (PiA), and cis‐2,6‐dimethylpiperidineamide (DMPA) were performed under various conditions, and their polymerization behavior was compared with that of N,N‐diethylamide analogue (DEA), which was previously reported. When polymerization of DiPA was performed at ?78 °C with potassium counter ion, only trace amounts of oligomers were formed, whereas polymers with a narrow molecular weight distribution were obtained in moderate yield when DiPA was polymerized at 0 °C in the presence of LiCl. Decrease in molecular weight and broadening of molecular weight distribution were observed when polymerization was performed at a higher temperature of 20 °C, presumably because of the effect of ceiling temperature. In the case of DMPA, no polymer was formed at 0 °C and polymers with relatively broad molecular weight distributions (M_w/M_n = 1.2) were obtained at 20 °C. The polymerization rate of PiA was much faster than that of the other monomers, and poly(PiA) was obtained in high yield even at ?78 °C in 24 h. The microstructure of the resulting polymers were exclusively 1,4‐ for poly(DMPA), whereas 20–30% of the 1,2‐structure was contained in poly(DiPA) and poly(PiA). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3714–3721, 2010     

Bio‐safe synthesis of linear and branched PLLA

The catalytic activities of Bi(III) acetate (Bi(OAc)₃) and of creatinine towards the ring‐opening polymerization of L ‐lactide have been compared with those of a stannous (II) ethylhexanoate ((SnOct)₂)‐based system and with those of a system catalyzed by enzymes. All four were suitable catalysts for the synthesis of high and moderate molecular weight poly(L ‐lactide)s and the differences in reactivity and efficiency have been studied. Linear and branched poly(L ‐lactide)s were synthesized using these bio‐safe initiators together with ethylene glycol, pentaerythritol, and myoinositol as coinitiators. The polymerizations were performed in bulk at 120 and 140 °C and different reactivities and molecular weights were achieved by adding different amounts of coinitiators. A molecular weight of 105,900 g/mol was achieved with 99% conversion in 5 h at 120 °C with a Bi(OAc)₃‐based system. This system was comparable to Sn(Oct)₂ at 140 °C. The reactivity of creatinine is lower than that of Bi(OAc)₃ but higher compared with enzymes lipase PS (Pseudomonas fluorescens). A ratio of Sn(Oct)₂M_o/I_o 10,000:1 was needed to achieve a polymer with a reasonable low amount of tin residue in the precipitated polymer, and a system catalyzed by creatinine at 140 °C has a higher conversion rate than such a system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1214–1219, 2010     

Poly(ester amide)s derived from L‐tartaric acid and amino alcohols. II. Aregic polymers

A series of aregic poly(ester amide)s (a‐PEAT6) with ester/amide ratios (a : b) varying from 1 : 19 to 1 : 2 were prepared with L ‐tartaric acid, 6‐aminohexanol, and 1,6 hexanediamine as the starting materials. Polycondensation in a solution of the diamine with mixtures of pentachlorophenyl‐activated di‐O‐methyl‐L ‐tartaric and 6‐aminohexyl‐di‐O‐methyl‐L ‐tartaric acids led to a‐PEAT6(a : b), with the a : b ratio determined by the composition of the feed. The newly synthesized poly(ester amide)s were characterized by elemental analysis, size exclusion chromatography, and IR and NMR spectroscopy. They had number‐average molecular weights between 25,000 and 45,000 and were highly crystalline, showing melting temperatures ranging from 100 to 230 °C and glass‐transition temperatures oscillating between 50 and 100 °C. The thermal degradation of a‐PEAT6(a : b) began above 200 °C and concluded with a final weight loss between 60 and 90% of the initial mass. The process evolved with the formation of cyclic tartarimide units and extensive main‐chain scissions. The degradation mechanism is discussed in relation to the chemical composition and microstructure of the polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2687–2696, 2000     

Polymerization of vinyl monomers using a novel trifunctional iniferter

A novel trifunctional iniferter with photoinduced and thermal chemical dissociation functional groups in one molecule, diethyl 2,3‐dicyano‐2,3‐di(p‐N,N‐diethyldithiocarbamylmethyl)phenylsuccinate (DDDCS), was successfully synthesized. The bulk polymerizations of styrene and methyl methacrylate initiated by DDDCS under UV‐light irradiation and heating, respectively, were studied. The polymerizations proceeded via a living polymerization process in both cases; that is, the conversion and molecular weight of the resulting polymer increased linearly with increased reaction time. The resulting polymers, containing α‐ and ω‐N,N‐diethyldithiocarbamyl end groups, served as macroiniferters for further block copolymerization. Electron paramagnetic resonance studies showed that DDDCS initiated as a photoiniferter under UV‐light irradiation by reversible C S‐bond dissociation and as a thermal iniferter under heating by reversible hexasubstituted C C‐bond dissociation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2115–2120, 2000     

Polymerization of o‐quinodimethanes. V. Ionic polymerization of o‐quinodimethanes generated by thermal isomerization of corresponding benzocyclobutenes

The ionic polymerization of substituted o‐quinodimethanes via thermal isomerization of benzocyclobutenes is described. In the cationic polymerizations of 1‐methoxy‐o‐quinodimethane in the presence of various cationic initiators at 110 °C for 12 h, chain transfer reactions also considerably underwent besides the polymerization. Meanwhile, cationic polymerizations of 1‐trimethylsilyloxy‐o‐quinodimethane under the same conditions gave good yields of the corresponding polymer. Anionic polymerizations of 1‐cyano‐o‐quinodimethane in the presence of anionic initiators such as n‐BuLi or t‐BuOK were performed at various temperatures for 12 h. Good yields of hexane‐insoluble polymer, which was produced by anionic polymerization of corresponding o‐quinodimethane as an intermediate, were obtained above 120 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 844–850, 2008     

Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

Catalysis of enantiomeric ester hydrolysis in polymer domains: Catalytic effects of N-decanoyl-histidine and of dipeptide derivatives containing a histidyl residue

The catalytic activities of N-decanoyl-L -histidine and its methyl ester and of dipeptide derivatives containing an L -histidine residue toward the stereoselective hydrolysis of enantiomeric substrates have been studied at pH 7.30 (in 0.01M Bis-tris buffer) and 25°C in the presence of poly(ethyleneimine) derivatives. The dipeptide catalyst revealed greatest stereoselectivity in a quaternized poly(ethyleneimine) derivative. A comparison of catalytic effects on both the rate constants and stereoselectivities of N-decanoyl-L -histidine and its methyl ester elucidates the cooperative effects of carboxyl groups in the polymer domains. The structure of the substrates influenced both the rate constants and stereoselectivities in polymer domains.     

Synthesis and nonlinear optical properties of novel Y‐type polyurethane containing tricyanovinylthiazole with enhanced thermal stability of second harmonic generation

A novel Y‐type poly[iminocarbonyloxyethyl‐5‐methyl‐4‐{2‐thiazolylazo‐4‐(1,2,2‐tricyanovinyl)}resorcinoxyethyloxycarbonylimino‐(3,3′‐dimethoxy‐4,4′‐biphenylene)] 4 containing 5‐methyl‐4‐{5‐(1,2,2‐tricyanovinyl)‐2‐thiazolylazo}resorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute part of the polymer backbone, was prepared and characterized. Polyurethane 4 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It showed a thermal stability up to 250 °C in thermogravimetric analysis thermogram and the glass‐transition temperature (T_g) obtained from differential scanning calorimetry thermogram was around 118 °C. The second harmonic generation coefficient (d₃₃) of poled polymer films at 1560 nm fundamental wavelength was around 8.43 × 10^?9 esu. The dipole alignment exhibited a thermal stability even at 12 °C higher than T_g, and there was no SHG decay below 130 °C due to the partial main‐chain character of the polymer structure, which is acceptable for NLO device applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1166–1172, 2010     

Synthesis and characterization of new AB-type poly(etherimide)s containing bisphenol moieties

A series of new AB-type poly(etherimide)s having bisphenol-type moiety was prepared by the one-pot polyimidization using triphenylphosphite(TPP) in N-methyl-2-pyrrolidone(NMP)/pyridine solution at 150°C. Complete cyclodehydration was observed in the polymerizations as well as in model reactions. Polymers were obtained with inherent viscosities in the 0.27–0.49 dL/g range. The M_n and M_w/M_n of poly[4-(1,4-phenyleneoxy-1,4-phenylenehexafluoro-isopropylidene-1,4-phenylene)oxyphthalimide] (4d) with η_inh = 0.49 dL/g were 73,400 g/mol and 1.5, respectively. Most polymers could readily be dissolved in common organic solvents such as DMAc, NMP, and m-cresol. The polymer 4d was soluble even in chloroform. These polymers had glass transition temperatures between 205 and 235°C, and 5% weight loss temperatures in the range of 511–532°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3530–3536, 1999