Helix-sense-selective copolymerization of phenyl[bis(2-pyridyl)]methyl methacrylate,diphenyl(2-pyridyl)methyl methacrylate and triphenylmethyl methacrylate with chiral anionic initiators

Optically active poly[triphenylmethyl methacrylate-co-phenyl[bis(2-pyridyl)]methyl methacrylate] (poly[TrMA-co-PB2PyMA], poly[diphenyl(2-pyridyl)methyl methacrylate-co-phenyl[bis(2-pyridyl)]methyl methacrylate] (poly[D2PyMA-co-PB2PyMA]), and poly[triphenylmethyl methacrylate-co-diphenyl(2-pyridyl)-methyl methacrylate] (poly[TrMA-co-D2PyMA]) were prepared by helix-sense-selective copolymerization with complexes of organolithium with (−)-sparteine [(−)Sp],(S, S)-(+)- and (R, R)-(−)-2,3-dimethoxy-1,4-bis(dimethylamino)butane [(+)- and (−)DDB], and (S)-(+)-2-(1-pyrrolidinylmethyl)pyridine [(+)PMP] as anionic initiators in toluene at low temperature. The copolymers obtained with (−)Sp and (+)DDB or (−)DDB complexes of organolithium showed low optical activity, but to [(+)PMP] complex with N,N′-diphenyleneamine monolithium amide [(+)PMP–DPEDA–Li)] was effective in synthesizing copolymers of high optical rotation ([α] about +320 to + 370°) which were comparable to those of corresponding homopolymers with one-handed helical structure. The optical rotations of poly[TrMA-co-PB2PyMA] and poly[TrMA-co-D2PyMA] were much more stable than that of poly(D2PyMA) or poly(PB2PyMA) in a solution of CHCl₃–2,2,2-trifluoroethanol (10 : 1, v/v) at 25°C, but optical rotation of poly[D2PyMA-co-PB2PyMA] slowly decreased with time in the same conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2127–2133, 1998     

Asymmetric polymerization of aromatic isocyanates with optically active anionic initiators

The asymmetric anionic polymerization of o-, m-, and p-methylphenyl isocyanates, p-methoxyphenyl isocyanate, p-chlorophenyl isocyanate, 2,6- and 3,4-dimethylphenyl isocyanates, and 1-naphthyl isocyanate was carried out using chiral anionic initiators such as the lithium salts of (?) -menthol, (?) -(2-methoxymethyl) pyrrolidine, and (+) -1-(2-pyrrolidinylmethyl) pyrrolidine. Although o-methylphenyl isocyanate gave an insoluble polymer and 2,6-dimethylphenyl isocyanate afforded no polymer, the other monomers gave soluble polymers, which showed optical activity due to the prevailing helicity of the polymer chain induced by chiral initiator residues attached to the α-end of the polymer chain. The molecular mechanics conformational calculation for a tetramer of m-methylphenyl isocyanate supported the helical conformation of the main chain. The optical rotation of the polymers depended significantly on temperature. © 1994 John Wiley & Sons, Inc.     

Helix-sense-selective polymerization of phenyl[bis(2-pyridyl)]methyl methacrylate and chiral recognition ability of the polymer

A novel monomer, phenyl[bis(2-pyridyl)]methyl methacrylate (PB2PyMA), was synthesized. The solvolysis rate of PB2PyMA measured in CDCl₃–CD₃ OD [1/1 (v/v)] by ¹H-NMR spectroscopy at 35°C was much smaller than those of triphenylmethyl methacrylate (TrMA) and diphenyl-2-pyridylmethyl methacrylate (D2PyMA). PB2PyMA was anionically polymerized with the complexes of organolithiums with (?)-sparteine (Sp), (S,S)-(+)-and (R,R)?(-)-2,3-dimethoxy-1,4-bis(dimethylamino)butanes[(+)-and (?) -DDB], and (S)-(+)-1-(2-pyrrolidinylmethyl) pyrrolidine (PMP) in toluene at low temperature. The polymers obtained with Sp and DDB complexes showed low optical activity. PMP complexes, particularly that with N,N′-diphenylethylenediamine monolithium amide, were effective in synthesizing a polymer of high optical rotation ([α]²⁵₃₆₅ ～ +1350°) which was comparable to those of poly(TrMA) and poly(D2PyMA) with one-handed helical structure. The optical rotation of poly(PB2PyMA) in a mixture of CHCl₃ and 2,2,2-trifluoroethanol (9/1, v/v) slowly decreased with time. Optically active poly(PB2PyMA) coated on macroporous silica gel was able to resolve racemic compounds as a chiral stationary phase for high-performance liquid chromatography. © 1993 John Wiley & Sons, Inc.     

Asymmetric anionic polymerization of maleimides bearing bulky substituents

Asymmetric anionic homopolymerizations of N‐substituted maleimide (RMI) bearing bulky substituents [R = benzyl, diphenylmethyl (DPhMI), 9‐fluorenyl (9‐FlMI), triphenylmethyl, (diphenylmethyloxycarbonyl)methyl, (9‐fluorenyloxycarbonyl)methyl] were carried out with complexes of organometal compounds (alkyllithium, diethylzinc) with six chiral ligands to obtain optically active polymers. The chiroptical properties of the polymers were affected strongly by the substituents on nitrogen in the maleimide ring, the organometal and chiral ligands. Poly(DPhMI) initiated by an n‐butyllithium/(−)‐sparteine (Sp) complex showed a positive specific rotation ([α] +60.3°). Poly(9‐FlMI) prepared with a florenyllithium/Sp complex exhibited the highest specific rotation (+65.7°). The specific rotations of the poly(RMI) obtained were attributed to different contents between the stereogenic centers (S,S) and (R,R) based on threo‐diisotactic structures of the main chain. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 310–320, 2000     

Synthesis of 4-arm methyl methacrylate star polymer by atom transfer radical polymerization

The synthesis of 4-arm methyl methacrylate star polymer had been achieved successfully by atom transfer radical polymerization using CuCl as catalyst, 2, 2′-bipyridyl as ligand and pentaerythritol tetrakis (2-bromoisobutyrate) as the initiator. The star polymer was characterized by ¹H-NMR and GPC, by which the precise 4-arm structure of the PMMA was confirmed. __________ Translated from Journal of Shaanxi Normal University (Natural Science Edition), 2008, 36(2) (in Chinese)     

Asymmetric radical polymerization and copolymerization of N‐(1‐phenyldibenzosuberyl)methacrylamide and its derivative leading to optically active helical polymers

N‐(1‐Phenyldibenzosuberyl)methacrylamide (PDBSMAM) and its derivative N‐[(4‐butylphenyl)dibenzosuberyl]methacrylamide (BuPDBSMAM) were synthesized and polymerized in the presence of (+)‐ and (?)‐menthols at different temperatures. The tacticity of the polymers was estimated to be nearly 100% isotactic from the ¹H NMR spectra of polymethacrylamides derived in D₂SO₄. Poly(PDBSMAM) was not soluble in the common organic solvents, and its circular dichroism spectrum in the solid state was similar to that of the optically active poly(1‐phenyldibenzosuberyl methacrylate) (poly(PDBSMA)) with a prevailing one‐handed helicity, indicating that the poly(PDBSMAM) also has a similar helicity. Poly(BuPDBSMAM) was optically active and soluble in THF and chloroform. Its optical activity was much higher than that of the poly[N‐(triphenylmethayl)methacrylamide], suggesting that one‐handed helicity may be more efficiently induced on the poly(BuPDBSMAM). The copolymerization of BuPDBSMAM with a small amount of optically active N‐[(R)‐(+)‐1‐(1‐naphthyl)ethyl]methacrylamide, particularly in the presence of (?)‐menthol, produced a polymer with a high optical activity. The prevailing helicity may also be efficiently induced. The chiroptical properties of the obtained polymers were studied in detail. The chiral recognition by the polymers was also evaluated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1304–1315, 2007     

Helix‐sense‐selective copolymerization of triphenylmethyl methacrylate with chiral 2‐isopropenyl‐4‐phenyl‐2‐oxazoline

The asymmetric induction leading to a one‐handed helix was investigated in the anionic and radical copolymerization of triphenylmethyl methacrylate (TrMA) and (S)‐2‐isopropenyl‐4‐phenyl‐2‐oxazoline ((S)‐IPO), and highly isotactic copolymers with a reasonable optical activity were obtained. In the anionic copolymerization, the optical activity of the obtained copolymers depended on the polarity of solvents, and a highly optically active copolymer was produced in the copolymerization in toluene. The chiral oxazoline monomer functioned not only as a comonomer but also as a chiral ligand to endow the polymer with large negative optical rotation in the copolymerization with TrMA. The copolymers with small positive optical rotation were obtained in THF, indicating that IPO unit may work only as the chiral monomer that dictates the helical sense via copolymerization with TrMA. The isotacticity of the obtained copolymers depended on the contents of TrMA units in the copolymers, but was almost independent of the solvent for copolymerization. In the radical copolymerization, the obtained copolymers exhibited small optical activities. It seemed that the chiral monomer cannot induce one‐handed helical structure of TrMA sequences even if the sequences probably have a high isotacticity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 441–447     

Mechanism of the anionic polymerization of methyl methacrylate initiated by tetramethylammonium–triphenylmethide in tetrahydrofuran

A tetramethylammonium (TMA)–triphenylmethide (TPM) initiator generated in situ by the reaction of trimethyltriphenylmethylsilane with tetramethylammonium fluoride in tetrahydrofuran was found to have greater stability than the corresponding tetrabutylammonium or tetrahexylammonium derivatives. The predominant mode of degradation of TMA–TPM was found to be the TMA‐mediated methylation of TPM anions. The initiation of methyl methacrylate by TMA–TPM in tetrahydrofuran at ?78 °C was demonstrated to produce quantitative yields of poly(methyl methacrylate) with polydispersities of less than 1.1. Although the initiator efficiencies were low (9–40%) because of relatively slow initiation on the polymerization timescale, the initiation appeared to be rapid enough to give relatively narrow molecular weight distributions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 237–244, 2004     

Polymerization of optically active 2-fluorophenyl-4-fluorophenyl-2-pyridylmethyl methacrylate with anionic and radical initiators: Stereospecificity and helix-sense selection

Almost optically pure (+)- and (−)-2-fluorophenyl-4-fluorophenyl-2-pyridylmethyl methacrylate (2F4F2PyMA) monomers were obtained by HPLC resolution of the racemic monomer and polymerized with the use of anionic and free-radical initiators. Helix-sense selectivity during the polymerization seemed to be governed mainly by the chirality of the monomer itself, and the polymers obtained by using the complex of N,N′-diphenylethylenediamine monolithium amide with (S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine (PMP) in toluene at −78°C appeared to possess single-handed helical conformation (+)-poly[(−)-2F4F2PyMA], [α]₃₆₅ + 1510°; (−)-poly[(+)-2F4F2PyMA], [α]₃₆₅ − 1610°]. The single-handed helical (+)-poly[(−)-2F4F2PyMA] and (−)-poly[(+)-2F4F2PyMA] obtained with the PMP complex exhibited better chiral recognition ability toward trans-stilbene oxide compared with the single-handed helical poly(rac-2F4F2PyMA) prepared previously. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2645–2648, 1999     

Dependence of the kinetics of the anionic polymerization of methyl methacrylate on the concentration in active centers

Studies on the anionic polymerization of methyl methacrylate in tetrahydrofuran and in the presence of sparteine have revealed a beneficial effect due to this additive, resulting in a decrease in the extent of termination. Better control of the definition of the polymers formed can thus be achieved in the presence of this additive. On the other hand, macromolecular engineering requires a range of active species concentrations lower than 10^?3 mol L^?1 and particularly the synthesis of polymers of high molar masses. For a better understanding of the mechanism of chain growth under such concentration conditions, the kinetics of polymerization have been investigated with a technique based on adiabatic calorimetry. Sparteine has been found to lack sufficient cation‐binding power to prevent the propagating enolate ion pairs from aggregating. The rate constant of propagation of nonaggregated species has been estimated, as well as the aggregation constant of equilibrium. For very low initiator concentrations, termination reactions have been shown to profoundly alter the control of the polymerization and to prevent a quantitative monomer conversion. Theoretical maximal conversions have been calculated from kinetic data and compare well with the experimental values. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4964–4975, 2004     

Living anionic homo- and block copolymerization of 2-(tert-butylamino)ethyl methacrylate

Anionic polymerization of 2-(tert-butylamino)ethyl methacrylate (tBAEMA), which bears an unprotected secondary amine moiety, has been investigated in THF at −78°C. The presence of lithium chloride has been shown to be desirable to afford narrow molecular weight distribution as well as a good agreement between theoretical and observed molecular weight. The living character of the polymerization has also been demonstrated, and the synthesis of block copolymers carried out successfully. They have been analyzed by SEC by adding a mixture of secondary and tertiary amines to the eluent (THF) so as to avoid any polymer adsorption during elution. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2035–2040, 1997     

Polyepichlorohydrin polyurethane/poly(methyl methacrylate) interpenetrating polymer networks

Polyurethane (PU) based on polyepichlorohydrin/poly(methyl methacrylate) (PECH/PMMA) interpenetrating polymer networks (IPNs) was synthesized by a simultaneous method. The effects of composition, hydroxyl group number of PECH, NCO/OH ratio and crosslinking agent content in IPNs were investigated in detail. Some other glycols, such as poly(ethylene glycol), poly(propylene glycol) and hydroxyl-terminated polybutadiene, were also used to obtain PU/PMMA IPNs. The interpenetrating and fracture behaviors of the IPNs are explained briefly.     

Asymmetric anionic polymerization of N‐1‐naphthylmaleimide with chiral ligand‐organometal complexes in toluene

Asymmetric anionic homopolymerizations of N‐1‐naphthylmaleimide (1‐NMI) were performed with chiral ligand/organometal complexes to form optically active polymers. Poly(1‐NMI)s obtained with methylene‐bridged bisoxazoline derivatives (Rbox)‐diethylzinc (Et₂Zn) complexes showed high specific optical rotations ([α]) from +152.3 to +191.4°. Circular dichroism spectra of the polymers exhibited a split Cotton effect in the UV absorption‐band region. According to the exciton chirality method, the absolute configuration of the polymer main chain was determined according to the following method: (+)‐poly[N‐substituted maleimides (RMI)] main chains can contain more (S,S)‐ than (R,R)‐configurations. (?)‐Poly(RMI) main chains can contain more (R,R)‐ than (S,S)‐configurations. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3556–3565, 2001     

Anionic polymerization of methyl methacrylate initiated with lithium diphenylamide (Ph2NLi) in the presence of divalent transition metal halide

Anionic polymerization of methyl methacrylate (MMA) in the presence of divalent transition metal halide (MX₂ = FeBr₂, MnCl₂, CoCl₂, NiBr₂) was investigated. Initiating systems with various combinations of MX₂, lithium diphenylamide (Ph₂NLi), and organolithium (RLi, where R = nBu, Me) were effective to giving a high yield of poly(methyl methacrylate)s (PMMAs) at ?78 °C in toluene. The tacticity of the resulting PMMAs was highly dependent on the combination of the reagents used for the generation of the initiating systems within a syndiotactic (rr = 59%) to isotactic (mm = 65%) range. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 31–37, 2004     

苯乙烯-甲基丙烯酸甲酯的高温阴离子溶液共聚

以正丁基锂(n-BuLi)为引发剂、四氢呋喃(THF)为极性调节剂,采用具有较大空间位阻和特定电荷环境的P配合物作为抑制剂,在80℃下实现了苯乙烯(St)与甲基丙烯酸甲酯(MMA)的阴离子嵌段共聚.采用GPC、FT-IR、1H-NMR等手段对共聚物的结构及分子量进行了分析.结果表明:共聚物中各链节的分子量与设计分子量接...     

Synthesis of Poly(methyl methacrylate) Nanosize Particles by Differential Microemulsion Polymerization

Poly(methyl methacrylate) nanosize particles were synthesized by a differential microemulsion polymerization process. Sodium dodecylsulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of reaction conditions on the particle size have been investigated. A particle size of less than 20 nm in diameter has been achieved with surfactant/monomer and surfactant/water weight ratios of 1:18 and 1:120, i.e. much milder conditions than those previously reported in the literature.

TEM image of nanoparticles prepared via differential microemulsion polymerization.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

A novel route to poly(2-hydroxyethyl methacrylate) and its amphiphilic block copolymers

The vinyl of the ester group of 2-vinyloxyethyl methacrylate was first selectively reacted with acetic acid to obtain 2-[1-(acetoxy)ethoxy]ethyl methacrylate ( 2 ). This protected monomer was subjected to anionic polymerization in tetrahydrofuran at −60°C in the presence of LiCl, using 1,1-diphenylhexyllithium as initiator. The molecular weight of the polymer could thus be controlled and a narrow molecular weight distribution obtained. The protecting group, 1-(acetoxy)ethyl, could be easily eliminated (by quenching the polymerization reaction with methanol and water) to generate poly(2-hydroxyethyl methacrylate) (poly(HEMA)). Block copolymers were also prepared by the sequential anionic polymerization of MMA and 2 or styrene and 2 . They possess narrow molecular weight distributions, and controlled molecular weights and compositions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1865–1872, 1998     

Synthesis and characterization of poly (2-vinylpridine)-b-poly (t-butyl methacrylate)

The synthesis of well defined and monodisperse (M_w/M_n ≤ 1.2) narrow molecular weight distribution poly (2-vinylpyridine)-poly (t-butyl methacrylate) (P2VP-PTBMA) AB block copolymers is carried out by initiation of 2-vinylpyridine polymerization by 1,1-diphenylhexyllithium in THF at-78°C, followed by addition of TBMA and termination at ?78°C using MeOH. The formation of the BAB block copolymer is carried out in a similar fashion except that 1,4-dilithio-1,1,4,4-tetraphenylbutane is used as initiator. The corresponding synthesis of P2VP-PMMA block copolymers is carried in a similar manner, except that 1-2 equivalents of TBMA is used to end-functionalize the living P2VP before the addition of MMA. Without the addition of TBMA, trimodal molecular weight distributions in P2VP-b-PMMA are obtained. All the block copolymers are characterized by Size Exclusion Chromatography (SEC), Nuclear Magnetic Resonance (NMR), and Differential Scanning Calorimetry (DSC). © 1994 John Wiley & Sons, Inc.