Effects of surfactants on the phase transition of poly(N-isopropylacrylamide) in water

The effects of both anionic (sodium dodecyl sulfate, SDS) and cationic (dodecylpyridine bromide, DPB) surfactants on the phase transition of narrowly distributed poly(N-isopropylacrylamide) (PNIPAM) microgel particles were investigated by laser light scattering. The addition of SDS swells the particles and increases the phase transition temperature, while DPB has a much smaller effect. This difference cannot be due to an association between the surfactant hydrophobic tail and PNIPAM because DPB and SDS have an identical hydrophobic tail. The amide groups in PNIPAM are slightly protonized in deionized water (pH ∼ 5.5). Our results contradict a previous prediction that oppositely charged surfactants will collapse a polyelectrolyte gel. After adding SDS, a two-step phase transition of the PNIPAM gel is observed. This suggests that SDS forms micelles inside the microgel with the help of the immobilized counter ions on the gel network. The SDS micelles are broken into individual SDS molecules in the first step of phase transition, while in the second step individual SDS molecules are gradually expelled. Surfactant effects on the microgel particles are compared with those of individual PNIPAM chains. © 1996 John Wiley & Sons, Inc.     

聚N-异丙基丙烯酰胺接枝聚苯乙烯高分子刷的构象

当长链高分子高密度接枝到一个表面上时,由于分子链间的相互作用使得接枝的高分子链扩张而形成伸直链的构象,这种形态被称为高分子刷.     

Laser light scattering study of the degradation of poly(sebacic anhydride) nanoparticles

Poly(sebacic anhydride) (PSA) is biocompatible and degradable in basic media. We micronized this water‐insoluble polymer into stable polymeric nanoparticles via a microphase inversion. Such PSA nanoparticles degraded much faster than bulk PSA. The influence of the surfactant, temperature, and pH on the degradation of the PSA nanoparticles was investigated by a combination of static and dynamic laser light scattering. Under each condition, the degradation rate was nearly constant up to a 75% weight loss; that is, the degradation was close to zero‐order. The degradation rate increased with the pH and temperature. Biomedical applications of such PSA nanoparticles are suggested. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 703–708, 2001     

Light-scattering study of the aggregation of syndiotactic poly(methyl methacrylate) in solution.

Syndiotactic poly(methyl methacrylate (s-PMMA) may undergo aggregation in n-butyl chloride (n-BuCl) at temperatures below the theta temperature. The aggregation behavior of the s-PMMA with weight-average molecular weight M(w) =6.06 x 10(5) g mol(-1) was studied by a combination of static and dynamic laser-light-scattering experiments. A solution of concentration 1.12 x 10(-4) g mL(-1) was quenched from 50 degrees C (above the theta temperature in n-BuCl, 35 degrees C to 12 degrees C, and the aggregation process was measured over 60 h. The time dependence of M(w) the root-mean-square z-average radius of gyration < R(g) >, and the average hydrodynamic radius were used to monitor the growth of the aggregates, with the result M(w) approximately < R(g) > d(f) (where d(f) = 1.98 +/- 0.02), which implies the formation of a fractal aggregate. The observed fractal dimension, d(f), is close to that expected for a reaction-limited cluster aggregation for which d(f) = 2.1. In addition, atomic force microscopy was used to image the aggregates.     

Small-angle neutron scattering study on microstructure of poly(N-isopropylacrylamide)-block-poly(ethylene glycol) in water

By employing small-angle neutron scattering (SANS), we investigated the microstructures of, poly(N-isopropylacrylamide) (PNIPA)-block-poly(ethylene glycol) (PEG) (NE) in deuterated water D₂O, as related to macroscopic behaviors of fluidity, turbidity and synerisis. SANS revealed following results: (i) microphase separation occurs at around above 17 °C in a temperature range of transparent sol below 30 °C. In the microdomain appeared in the transparent sol state, both block chains of PNIPA and PEG are swollen by water; (ii) for the NE solution of polymer concentration W_p > 3.5% (w/v), corresponding to opaque gel above 30 °C, a percolated structure, i.e., network-like domain is formed by NE as a result of macrophase separation due to dehydration of the PNIPA chains. As the temperature increases toward 40 °C, the network domain is squeezed along a direction parallel to the NE interface, which leads to increase of the interfacial thickness given by swollen PEG chains and to the macroscopic synerisis behavior.     

Synthesis of thermoresponsive polystyrene-based comb-type grafted poly(N-isopropylacrylamide)

Narrowly distributed polystyrene-g-p(N-isopropylacrylamide) (PSt-g-PNIPAM) was prepared by atom transfer radical polymerization (ATRP) of N-isopropylacrylamide using the brominated polystyrene as macroinitiator and CuCl combined with hexamethyltriethylenetetramine as catalyst. Fourier transform infrared (FT-IR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy confirmed the structure of PSt-g-PNIPAM. The gel permeation chromatography (GPC) showed that the graft copoly- mer had a single distribution peak with molecular weight, Mn (g/mol) of 19815 g/mol (using polystyrene as the standard). Differential scanning calorimetry (DSC) revealed that due to both effects of hydro- phobic isopropyl groups and hydrogen bonds in the amide group, the glass transition temperature (Tg) of PSt-g-PNIPAM enhanced 16.0 ℃ compared to the Tg of the polystyrene.     

Coil-to-globule-type transition of poly(N-isopropylacrylamide) adsorbed on colloidal silica particles

 The temperature dependence of the dimensions of poly(N-isopropylacrylamide) (PNIPAM) adsorbed on two different colloidal silica particles was studied with dynamic light scattering. The hydrodynamic diameter was measured when the temperature was varied stepwise from 10 to 60 °C. PNIPAM molecules free in solution undergo a conformational transition at the θ temperature. We have found that PNIPAM adsorbed onto silica particles also undergoes a transition below the θ temperature. When a small amount of polymer was adsorbed the coil-to-globule transition at the θ temperature did not occur. Potentiometric titrations showed that the surface charge of the silica particles was not affected by the polymer adsorption. Sodium dodecyl sulfate (SDS) (100–1200 mg/l) was added to improve the stability. The particles with a higher zeta potential required a smaller addition of SDS to prevent coagulation compared to the particles with a smaller surface potential. For low additions of SDS the transition curves of adsorbed PNIPAM were unaffected. For larger additions of SDS the collapse of PNIPAM was shifted to higher temperatures. When as much as 1200 mg/l SDS was added, two regions with weak transitions were observed before the collapse. It was also observed that the presence of SDS results in a smaller adsorption of PNIPAM onto the particles. The addition of SDS strongly increased the magnitude of the electrophoretic mobility of the polymer–particle unit. From the electrophoretic measurements an electrokinetic layer thickness was calculated and it was found to be smaller than the corresponding hydrodynamic layer thickness, as obtained by dynamic light scattering. Received: 14 December 1999/In revised form: 22 February 2000/Accepted: 6 March 2000     

聚(N-异丙基丙烯酰胺)类热敏材料的研究进展

从均聚物、共聚物及接枝改性三方面对聚（Ｎ－异丙基丙烯酰胺）类热敏高分子材料的最新研究进展进行了综述。简述了其热敏机理以及这种热敏材料在生物医学工程中的应用。     

Monte Carlo study of the coil-to-globule transition of a model polymeric system

Monte Carlo computer simulations of single, flexible, self-avoiding chains on a cubic lattice have been performed upon conditions of increasing segment–segment cohesive energy (deteriorating solvent quality). The simulations spanned a wide range of chain lengths (20–10,000, i.e., up to molecular weights of a few millions) and cohesive energies (0.0–0.45k_BT, i.e., from athermal to very poor solvents). The chain length dependence of the chain size in poor solvents was characterized by a wide plateau of almost null growth for intermediate chain lengths. This plateau was linked to the development of the incipient constant density core, while genuine power law dependence (1/3) was not reached even for the longest chains and poorest solvents simulated here. The mere appearance of a core required substantial chain lengths (higher than 1000; molecular weights of a few hundred thousands), while short chains underwent a gradual densification devoid of any qualitative changes in the density distribution. Sufficiently long chains became more but not quite spherical and underwent a reasonably sharp second order phase transition. The findings were generally in agreement with predictions of mean-field theory and with the use of the standard scaling variables, despite slight inconsistencies. Nevertheless, the results stress the fact that short chains never form a constant density core and that core-dominance on the globule's properties (“volume approximation”) is only valid for extraordinarily long chains [molecular weight of O(10⁹)], an effect linked to the relatively diffuse nature of the surface layer and originating from chain connectivity in conjunction with spherical geometry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3651–3666, 2006     

Positron annihilation lifetime study of continuous volume phase transition of poly(N-isopropylacrylamide) gel induced in methanol–water mixed solvent

The macroscopic volume shrinkage and swelling of poly(N-isopropylacryl-amide) (PNIPA) gel induced by the compositional change in the methanol–water mixed solvent is correlated to the change in the nanoscopic free volume size and numerical concentration formed in the PNIPA gels. The free volume size and numerical concentration are estimated from the longest component appearing in the positron annihilation lifetime curves. The apparent free volume fraction calculated by the free volume size and numerical concentration, and dispersion of the free volume deduced by the size distribution are utilized to analyze the origin and location of the free volumes. The free volume parameters obtained by analysis of the positron annihilation data show various nanoscopic phases occuring within the PNIPA gels during the volume change, implying the variation of the strength of the interactions among the solvent molecules and the polymer chains of the PNIPA. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1141–1151, 1998     

Clustering of poly(ethylene oxide) in water revisited

The dynamic light scattering results presented in this letter demonstrate that the clustering of poly(ethylene oxide) (PEO) can be observed even in ultrapure, freshly double‐distilled and filtered deionized water. It is confirmed that the filtration of solutions removes the clustering structure and that a steady‐state amount of PEO in clusters is reformed in filtered solutions within 24 h. Adding a drop of chloroform to unfiltered aqueous solutions of PEO temporarily alters the clustering structure, but it prevents the clustering of PEO in filtered solutions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 135–138, 2003     

Fluorocarbon- containing hydrophobically modified poly(N-isopropylacrylamide)

A fluorocarbon-modified poly(N-isopropylacrylamide) has been synthesized by copolymerization of N-isopropyl acrylamide with a small amount of acrylate or methacrylate containing a perfluoroalkyl group. It was found that the hydrophilicity of macromolecular backbone is an important factor to the solution properties of the copolymers and that hydrophobic association between fluorocarbon groups is stronger than that between the corresponding hydrocarbon analogies. The viscosity of some of the copolymer solutions was very sensitive to temperature. It was dilatant at higher fluorocarbon comonomer content ( > 0.20-1.0 mol%) and was Newtonian at very low fluorocarbon comonomer content (0.03-0.2 mol% ) . Evidence for hydrophobic association of the fluorocarbon groups was obtained from the effects of adding Nad and surfactants on the solution viscosity. The LC-ST properties of these copolymers were studied by DSC method and this was also found to be consistent with hydrophobic association between the fluorocarbo     

The Effect of Number of Arms on the Aggregation Behavior of Thermoresponsive Poly(N-isopropylacrylamide) Star Polymers

The thermoresponsive nature of aqueous solutions of poly(N-isopropylacrylamide) (PNIPAAM) star polymers containing 2, 3, 4, and 6 arms has been investigated by turbidity, dynamic light scattering, rheology, and rheo-SALS. Simulations of the thermosensitive nature of the single star polymers have also been conducted. Some of the samples form aggregates even at temperatures significantly below the lower critical solution temperature (LCST) of PNIPAAM. Increasing concentration and number of arms promotes associations at low temperatures. When the temperature is raised, there is a competition between size increase due to enhanced aggregation and a size reduction caused by contraction. Monte Carlo simulations show that the single stars contract with increasing temperature, and that this contraction is more pronounced when the number of arms is increased. Some samples exhibit a minimum in the turbidity data after the initial increase at the cloud point. The combined rheology and rheo-SALS data suggest that this is due to a fragmentation of the aggregates followed by re-aggregation at even higher temperatures. Although the 6-arm star polymer aggregates more than the other stars at low temperatures, the more compact structure renders it less prone to aggregation at temperatures above the cloud point.     

激光光散射表征聚N－异丙基丙烯酰胺的分子量分布

采用自由基聚合法合成了聚N-异丙基丙烯酰胺(PNIPAAM)样品,由激光光散射法(LLS),包括绝对累积散射光强的角度依赖性(静态LLS)和线宽分布的角度依赖性(动态LLS)表征了合成的PNIPAAM样品的分子量分布。通过对动态光散射测得的电场-电场时间相关函数的拉普拉斯变换,求得平动扩散系数分布G(D);结合静态和动态光散射测量的结果,即M_w和G(D),确定了PNIPAAM样品的平动扩散系数D对分子量M的标定关系式D=2.84×10^-4M^-0.55,并将G(D)转换成分子量分布F_w(M).     

Solution Behavior of Poly(n-Isopropylacrylamide) in Water: Effect of Additives

The effect of different kinds of additives (electrolytes, nonelectrolytes, hydrotropes, and surfactants) on the cloud point (CP) of low molecular weight and narrow dispersed poly(n-isopropylacrylamide) (PNIPAM) synthesized via reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization was examined. The CP showed a concentration dependent variation and it is greatly modified in the presence of additives. The size of the random polymer coil at 30°C obtained from dynamic light scattering (DLS) measurements is often influenced by the presence of additives. We have explained the effects of different additives on PNIPAM in terms of their interaction with polymer and resultant changes in the coil structure.     

温敏性PNIPAAm水凝胶对布洛芬的控制释放

采用自由基聚合法在水溶液中制备了温敏水凝胶聚N-异丙基丙烯酰胺(PNIPAAm),以非水溶性药物布洛芬(IBU)为模型药物分子,研究了该水凝胶的温敏性能及与药物IBU的相互作用,考察了不同温度下(25 ℃和37 ℃)IBU在磷酸盐缓冲溶液(PBS,pH=7.4)中的释放行为.研究结果表明:该水凝胶的最低临界溶解温度(L...     

聚(N-异丙基丙烯酰胺)类材料的应用

聚(N-异丙基丙烯酰胺)(PNIPAAm)及其共聚物,在水溶液中表现出最低临界溶液温度(LCST),在LCST附近会发生可逆相转变。利用这种特性,可将热敏性高分子材料应用于生物医学工程、免疫分析、催化、分离提纯等领域。主要综述了热敏性PNIPAAm类高分子材料,在这些领域中的应用情况。     

Prepation of poly(N-isopropylacrylamide)-grafted silica gel and its temperature-dependent interaction with proteins

Poly(N-isopropylacrylamide) oligomer was immobilized onto a silica gel surface. The gel adsorbed a hydrophobic protein γ-globulin (IgG) at 37°C, however, did not adsorb IgG at 24°C. The adsorbed IgG at 37°C was adsorbed by lowering the temperatue, No adsorption of a hydrophilic protein bovin serum albumin (BSA) onto this matrix was observed at 37°C nor 24°C.     

交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络水凝胶的制备及其溶胀性能

将线性聚(N-异丙基丙烯酰胺)(PNIPAAm)和海藻酸钠(SA)分子同时引入到PNIPAAm凝胶中,制备了交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络(Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN)水凝胶。在弱碱性条件下(pH=7.4),改变SA与线性PNIPAAm的质量比对Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的溶胀度没有太大的影响。在酸性条件下(pH=1.0),其溶胀度随着SA与线性PNIPAAm质量比的减小而增大。由于亲水性SA与线性PNIPAAm的协同作用,Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的消溶胀速率得到很大提高。     

The electrophoresis of poly(N-isopropylacrylamide) microgel particles

 The electrophoretic mobility of a poly(N-isopropylacrylamide) microgel containing carboxylic groups has been measured as a function of the ionic strength, between 0.1 and 100 mM NaCl, over the temperature range 2545 ^∘C. The mobility data obtained have been evaluated using different models, including the porous-sphere, the soft-plate and the soft-sphere models as well as the hard-sphere model developed by Henry and later refined by O'Brien and White. The “porous” or “soft” behaviour is evident at lower temperatures, whereas at higher temperatures none of the models can fully explain the observed behaviour. It is suggested that the discrepancies at higher temperatures can be partly ascribed to the neglect of the relaxation effect in the “soft” models. Received: 30 June 1999/Accepted in revised form: 12 October 1999