Poly(isobornyl methacrylate‐co‐methyl acrylate): Synthesis and stereosequence distribution analysis by NMR spectroscopy

Copolymerization of isobornyl methacrylate and methyl acrylate ( I/M ) is performed by atom transfer radical polymerization using methyl‐2‐bromopropionate as an initiator and PMDETA/CuBr as catalyst under nitrogen atmosphere at 70 °C. The copolymer compositions determined from ¹H NMR spectra are used to determine reactivity ratios of the monomers. The reactivity ratio determined from linear Kelen–Tudos method and non‐linear error‐in‐variable method, are r_I = 1.25 ± 0.10, r_M = 0.84 ± 0.08 and r_I = 1.20, r_M = 0.82, respectively. 1D, distortion less enhancement by polarization transfer and 2D, heteronuclear single quantum coherence, and total correlation spectroscopy NMR experiments are employed to resolve highly overlapped and complex ¹H and ¹³C{¹H} NMR spectra of the copolymers. The carbonyl carbon of I and M units and methyl carbon of I unit are assigned up to triad compositional and configurational sequences, whereas β‐methylene carbons are assigned up to tetrad compositional and configurational sequences. Similarly, methine carbon of I unit is assigned up to triad level. The couplings of carbonyl carbon and quaternary carbon resonances are studied in detail using 2D hetero nuclear multiple bond correlation spectra. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Investigation of microstructure of the acrylonitrile‐styrene copolymers by 2‐D NMR spectroscopy

Acrylonitrile‐Styrene (A/S) copolymers were prepared by photopolymerization using uranyl nitrate ion as initiator. The copolymer compositions were determined by elemental analysis, and comonomer reactivity ratios were determined by nonlinear least squares error in variables method (EVM). The complete spectral assignment of the ¹³C and ¹H‐NMR spectra were done with the help of Distortionless Enhancement by Polarization Transfer (DEPT) and by the two dimensional ¹³C‐¹H Heteronuclear Single Quantum Correlation (HSQC) and TOCSY experiments. The methylene and methine carbon resonance show both stereochemical and compositional sensitivity. The 2‐D Total Correlated Spectroscopy (TOCSY) experiment was used to ascertain the various geminal coupling between the methylene protons. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 721–727, 1999     

Nuclear magnetic resonance studies on microstructure of ethylene copolymers. VI. Carbon-13 spectra of ethylene–vinyl acetate copolymers

The 22.6-MHz Fourier-transform noise-decoupled ¹³C (carbon-13) NMR spectra of several ethylene–vinyl acetate (E–VA) copolymers were obtained. We found that triad information on monomer placement can be deduced from carbonyl resonances, triad and pentad information can be deduced from methine carbon resonances, and triad information is available from the methylene carbon resonances. The random comonomer distributions in E–VA polymerizations were demonstrated up to pentad placements. In addition, the use of model-compound data in the analysis of copolymer spectra was shown.     

Sequencing of trans-4-methacryloyloxyazobenzene/vinylidene chloride copolymers by one- and two-dimensional NMR spectroscopy

Trans-4-methacryloyloxyazobenzene/Vinylidene Chloride (M/V) copolymers of different monomer concentrations were prepared by solution polymerization using benzoyl peroxide as an initiator. The copolymer composition was determined from the ¹³C{¹H}-NMR spectrum. The quaternary carbon of M- and V-centered resonances were used for determining the sequences in terms of the distribution of M- and V-centered triads. The sequence distribution of M- and V-centered triads determined from ¹³C{¹H}-NMR spectra of the copolymer is in good agreement with the triad concentration calculated from the statistical model. The comonomer reactivity ratios, determined by both the Kelen Tudos (KT) and the nonlinear error in variables (EVM) methods are r_M = 3.59 ± 0.19, r_V = 0.89 ± 0.07; r_M = 3.76, and r_V = 0.93, respectively. ¹³C Distortionless Enhancement by Polarization Transfer (DEPT) spectrum was used to differentiate between the resonance signals of M- and V-methylene and methyl carbon units. Assignments to the methylene resonance signals have been assigned up to the tetrad levels using 2D HSQC experiments. The geminal couplings in the methylene proton region is shown in the 2D DQF-COSY spectrum. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3179–3185, 1999     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Microstructural characterization of acrylonitrile/pentyl acrylate copolymers by one and 2‐D NMR spectroscopy

Acrylonitrile/pentyl acrylate (A/P) copolymers of different monomer composition were prepared by solution polymerization using benzoyl peroxide as initiator. Copolymer compositions were determined by elemental analysis and quantitative ¹³C¹H‐NMR spectroscopy. The comonomer reactivity ratios, determined by both Kelen Tudos (KT) and nonlinear error in variables (EVM) methods are r_A = 0.75 and r_p = 0.45. 2‐D heteronuclear correlation spectroscopy (HSQC) was used to simplify the complex ¹H spectra of A/P copolymers in terms of configurational and compositional sequences. The microstructure was obtained in terms of the distribution of A‐ and P‐ centered triad sequences from ¹³C¹H‐NMR spectra of the copolymers. The copolymerization mechanism was found to follow a first order Markov Model. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 533–543, 1999     

Microstructure of glycidylmethacrylate/vinyl acetate copolymers by two‐dimensional nuclear magnetic resonance spectroscopy

Glycidylmethacrylate/vinyl acetate copolymers were prepared by solution polymerization with benzene as a solvent and benzoyl peroxide as an initiator. Copolymer compositions were determined from ¹H NMR spectra, and comonomer reactivity ratios were determined by the Kelen–Tudos (KT) method and the nonlinear least‐squares error‐in‐variable method (EVM). The reactivity ratios obtained from KT and EVM were r_G = 37.4 ± 12.0 and r_V = 0.036 ± 0.019 and r_G = 35.2 and r_V = 0.03, respectively. Complete spectral assignments of ¹³C and ¹H NMR spectra were done with the help of distortionless enhancement by polarization transfer and two‐dimensional ¹³C–¹H heteronuclear single quantum coherence and total correlation spectroscopy. The methyl, methine, and methylene carbon resonance showed both stereochemical and compositional sensitivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4051–4060, 2001     

Sequence distributions of vinyl chloride-vinyl acetate and vinyl chloride-vinyl propionate copolymers

¹³C-NMR spectroscopy was used in a detailed study of vinyl chloride-vinyl acetate and vinyl chloride-vinyl propionate copolymers. The NMR spectra of the methylene carbon region showed three split peaks whose intensities changed with composition of the copolymers. These peaks were assigned to diad sequences and the observed diad concentrations were in good agreement with the calculated concentrations in terms of the random copolymerization theory. For the methine carbon spectra of vinyl acetate or vinyl propionate units in the copolymers the degree of splitting of the signal was improved by the addition of tris(1,1,1,2,2,3,3-heptafluro-7,7-diemthyl-1,4,6-octanedinata)-praseodymium as a shift reagent. Four peaks assigned to the methine carbon were interpreted in terms of triad sequence distribution and tacticity.     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

Poly(acrylonitrile‐co‐methyl methacrylate‐co‐methyl acrylate): Synthesis and stereosequence distribution analysis by 2D NMR

Terpolymers of acrylonitrile (A), methyl methacrylate (B), and methyl acrylate (M) were synthesized under optimized atom transfer radical polymerization conditions using 2‐bromopropionitrile as an initiator and CuBr/dinonyl bipyridine as a catalyst. Variation of the feed composition led to terpolymers with different compositions. Composition of synthesized terpolymers were calculated from quantitative ¹³C{¹H} NMR spectra. Number average molecular weight and polydispersity index were determined by gel permeation chromatography. The overlapping and broad signals of the terpolymers were assigned completely to various compositional and configurational sequences by correlation of one‐dimensional ¹H, ¹³C{¹H}, and distortionless enhancement by polarization transfer and two‐dimensional heteronuclear single quantum coherence (HSQC) and total correlation spectroscopy (TOCSY). 2D HSQC NMR study shows one to one correlation between carbon and proton signals, while 2D TOCSY spectra were used to confirm 1, 2 bond geminal couplings between nonequivalent protons of same methylene group. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 25–37, 2009     

Characterization of organometallic polymers by 13C- and 119Sn-NMR: Configurational/compositional triads in poly(tri-n-butyltin methacrylate/methyl methacrylate)

The 1:1 and 2:1 formulations of the free radical initiated copolymers of methyl methacrylate (MMA) and tri-n-butyltin methacrylate (TBTM), and the homopolymer, poly(TBTM), are characterized by ¹³C- and ¹¹⁹C-NMR structural analyses were performed on the tributyltin-free hydrolyzate, a copolymer of MMA and methacrcylic acid (MAA). Configurational sequencing at the triad level is performed using the α-methyl region of the ¹³C-NMR spectrum. The probability of isotactic (meso) dyad placement at 80°C in the homopolymer (0.19) is determined to be significantly less than the probabilities observed for the copolymers (0.23–0.24). Random compositional sequencing is established for the copolymers through a comparison of the carbonyl regions of the ¹³C-NMR spectra of the hydrolyzates with the carbonyl regions in published spectra of structurally characterized copolymers of MMA and MAA. The ¹¹⁹Sn chemical shift and the tin-carbon J coupling for the polymers are dependent on the solvent employed. This dependence is attributed to electron donor or acceptor interactions between the solvent and the strong Sn? O dipole. The tin-containing copolymers exhibit multiple ¹¹⁹Sn resonances, which appear related to compositional sequencing.     

The effects of overall composition and monomer sequence distribution on the infrared carbonyl stretching frequencies of ethylene–vinylacetate and styrene–vinylacetate copolymers

The vinyl acetate centered triad fractions of some free radically prepared ethylene–vinyl acetate and styrene–vinyl acetate copolymers have been determined from the patterns of vinyl acetate methine carbon peaks in their ¹³C nuclear magnetic resonance (NMR) spectra. The positions and shapes of the carbonyl bands in the infrared (IR) absorption spectra of the copolymers recorded in chloroform are shown to depend on the compositions of the copolymers and on the proportions of the various vinyl acetate centered triads. Infrared absorption measurements may thus be used in part to characterize the monomer sequence distributions of these copolymers.     

Atom transfer radical copolymerizationof acrylonitrile/n‐butyl acrylate: Microstructure determination by two‐dimensional nuclearmagnetic resonance spectroscopy

Atom transfer radical polymerization conditions were optimized and standardized with different initiator and catalyst systems. Acrylonitrile/n‐butyl acrylate copolymers were synthesized with 2‐bromopropionitrile as the initiator and CuCl/Cu(0)/2,2′‐bipyridine as the catalyst system. Variations of the feed composition led to copolymers with different compositions. The number‐average molecular weight and the polydispersity index were determined by gel permeation chromatography. Quantitative ¹³C{¹H} NMR was employed to determine the copolymer composition. The reactivity ratios calculated with a methodology based on the Mao–Huglin terminal model were r_A = 1.30 and r_B = 0.68 for acrylonitrile and n‐butyl acrylate, respectively. The reactivity ratios determined by the modified Kelen–Tudos method were r_A = 1.29 ± 0.01 and r_B = 0.67 ± 0.01. ¹³C{¹H} NMR and distortionless enhancement by polarization transfer (DEPT‐45, 90, and 135) were used to distinguish methyl, methylene, methine, and quaternary carbon resonance signals. The overlapping and broad signals of the copolymers were assigned completely to various compositional and configurational sequences by the correlation of one‐dimensional (¹H, ¹³C{¹H}, and DEPT) and two‐dimensional (heteronuclear single quantum coherence, total correlation spectroscopy, and heteronuclear multibond correlation) NMR spectral data. The complete spectral assignments of carbonyl and nitrile carbons were performed with the help of heteronuclear multibond correlation spectra. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2810–2825, 2005     

Polymerization of coordinated monomers. XV. 13C-NMR study on the alternating copolymers of methyl methacrylate with styrene

By the use of various metal halides methyl methacrylate and styrene were copolymerized to produce equimolar alternating sequences and different cotacticities. The ¹³C-NMR spectra of these copolymers were simple in comparison to those of random copolymers because of the fixed monomer sequence which yielded sharply split triplets for carbonyl, methoxy, and quaternary carbons. The relative intensities in these split peaks varied according to the metal halide used. A comparison of the intensities made it possible to obtain clear-cut and quantitative information on the methyl methacrylate-centered triad cotacticity of the copolymers. The spectral assignment with respect to the methoxy carbon was definitely justified by the combined use of partly relaxed Fourier transform and selective decoupling techniques. The spectrum of aromatic C₁ carbon in styrene units also split into three main peaks. From their relative intensities the splitting was attributed to styrene-centered triad cotacticity. The assignment of this carbon was compared with two other assignments made for random copolymers of methyl methacrylate with styrene; they were contradictory, however. Furthermore, an apparent discrepancy was observed between methyl methacrylate-and styrene-centered tactic triads of these alternating copolymers. The origin of this discrepancy suggests a close relationship with the copolymerization mechanism.     

Random propene/4‐methyl‐1‐pentene copolymers synthesized with C2 symmetric highly isospecific metallocenes

Propene (P)/4‐methyl‐1‐pentene (Y) copolymers in a wide range of composition were prepared with isospecific single center catalysts, rac‐Et(IndH₄)₂ZrCl₂ ( EBTHI ), rac‐Me₂Si(2‐Me‐BenzInd)₂ZrCl₂ ( MBI ), and rac‐CH₂(3‐^tBuInd)₂ZrCl₂ ( TBI ). ¹³C NMR analysis of copolymers and statistical elaboration of microstructural data at triad level were performed. Unprecedented and surprising results are here reported. Random P/Y copolymers were prepared with the most isospecific catalyst, TBI , that is known to prepare ethene/propene and ethene/4‐methyl‐1‐pentene copolymers with long homosequences of both comonomers, whereas longer homosequences of both comonomers were observed in copolymers from the less enantioselective metallocenes EBTHI and MBI . These findings, which are against what is acknowledged in the field, can pave the way for the preparation on a large scale of random propene‐based copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2575–2585     

Infrared spectroscopic analysis of poly(methyl acrylate-co-styrene)

Methyl acrylate–styrene copolymers of different copolymer compositions were free-radically prepared. The relative intensities of the carbonyl frequencies of the methyl acrylate units at v 1730 cm^?1 were correlated with the copolymer composition. The positions and shapes of the carbonyl bands in the infrared absorption spectra of the copolymers-dissolved in chloroform, were shown to depend on the composition of the copolymers and upon the presence of different proportions of methyl acrylate centered triads. The results obtained by infrared spectroscopy were compared with those obtained by ¹³C-NMR. Infrared spectra may be used to yield information about both the copolymer composition and the triad sequence distribution.     

Near-monodisperse,n-alkyl,end-functionalized poly(methyl vinyl ether)s: Synthesis by living cationic polymerization and solution characterization

Water-soluble amphiphilic diblock copolymers were synthesized by the living cationic polymerization of methyl vinyl ether (hydrophilic block) and its subsequent termination with n-alcohols of chain lengths varying from one to eight, and three n-alkyl carboxylic acids with 10, 12, and 18 carbon atoms. Additionally, water and ethylene glycol were tested as terminating agents. The extent of the functionalization was determined using ¹H NMR spectroscopy. The cloud points of 1% w/w aqueous solutions of the polymers as determined by turbidimetry decreased from 32 to 21°C as the number of carbon atoms of the terminating agent increased. Aqueous GPC revealed micellization of the stearic acid-terminated block copolymer, while the other block copolymers existed mainly as unimers. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2547–2554, 1998     

The effect of an unsymmetric branched branch on the 13C NMR chemical shifts of main chain carbons in polyethylene

The ¹³C NMR spectra of copolymers of ethylene with 4‐methyl‐1‐hexene and 4‐methyl‐1‐pentene, respectively, were compared. The 4‐methyl‐1‐hexene/ethylene copolymer, which contains an unsymmetric 2‐methylbutyl branch, exhibits two distinct ¹³C NMR peaks for each of the pairwise methylenes spaced one, two, and three carbons from the backbone methine. The chemical shift differences for these pairwise methylenes are 57.4 Hz, 18.7 Hz, and 4.3 Hz, respectively, with chemical shift differences decreasing with increasing distance from the asymmetric carbon. The frequency differences for carbons farther from the branch were not distinguishable. The magnitude of the chemical shift difference also varies with temperature, with the first and second methylene carbon chemical shift differences decreasing with increasing temperature. The third carbon is almost unaffected by temperature variations. In contrast, the 4‐methyl‐1‐pentene/ethylene copolymer exhibits a single peak for each of the pairs of methylenes in the branch's vicinity. This is the first reported observation of a branched branch affecting the chemical shifts of main chain carbons in polyethylene containing short chain branches. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1210–1213, 2000