Surface Chemistry of Nanohybrids with Fumed Silica Functionalized by Polydimethylsiloxane/Dimethyl Carbonate Studied Using 1H, 13C,and 29Si Solid-State NMR Spectroscopy

The investigation of molecular interactions between a silica surface and organic/inorganic polymers is crucial for deeper understanding of the dominant mechanisms of surface functionalization. In this work, attachment of various depolymerized polydimethylsiloxanes (PDMS) of different chain lengths, affected by dimethyl carbonate (DMC), to silica nanoparticles pretreated at different temperatures has been studied using ²⁹Si, ¹H, and ¹³C solid-state NMR spectroscopy. The results show that grafting of different modifier blends onto a preheated silica surface depends strongly on the specific surface area (SSA) linked to the silica nanoparticle size distributions affecting all textural characteristics. The pretreatment at 400 °C results in a greater degree of the modification of (i) A-150 (SSA = 150 m²/g) by PDMS-10/DMC and PDMS-1000/DMC blends; (ii) A-200 by PDMS-10/DMC and PDMS-100/DMC blends; and (iii) A-300 by PDMS-100/DMC and PDMS-1000/DMC blends. The spectral features observed using solid-state NMR spectroscopy suggest that the main surface products of the reactions of various depolymerized PDMS with pretreated nanosilica particles are the (CH₃)₃SiO-[(CH₃)₂SiO-]_x fragments. The reactions occur with the siloxane bond breakage by DMC and replacing surface hydroxyls. Changes in the chemical shifts and line widths, as shown by solid-state NMR, provide novel information on the whole structure of functionalized nanosilica particles. This study highlights the major role of solid-state NMR spectroscopy for comprehensive characterization of functionalized solid surfaces.     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

Quantitative 1H NMR analysis of reacted silanol groups in silica nanoparticles chemically modified with monochlorosilanes

Quantitative analysis of reacted silanol groups in silica nanoparticles modified chemically with monochlorosilanes was performed by ¹H NMR after treatment with cesium fluoride. Silica nanoparticles were modified chemically by the reaction between the silanol groups and monochlorosilanes, and the structure of the organic moiety anchored onto the silica surface was confirmed with solid‐state ¹³C NMR. As monochlorosilanes react with silanol groups at 1:1 ratio unlike di‐ or trichlorosilanes, the number of the silanes introduced into silica nanoparticles equals that of reacted silanol groups. Organically modified silica nanoparticles were dissolved using cesium fluoride, and the amount of the soluble organic compounds originated from the introduced silanes was determined by a ¹H NMR internal standard method using pyrene as the reference. Those values determined by ¹H NMR were in good agreement with those determined by elemental analysis. Thus, the number of reacted silanol groups per one particle was calculated on the basis of the results obtained by the ¹H NMR method, and the values were highly dependent on the steric structure of the introduced silanes. Copyright © 2010 John Wiley & Sons, Ltd.     

Modification of silica nanoparticles by grafting of copolymers containing organosilane and fluorine moities

The free‐radical cotelomerization of 3‐(trimethoxysilyl)propyl methacrylate (TMSPMA) with 1,1,2,2‐tetrahydroperfluorodecyl acrylate (PFDA) in the presence of 2‐mercaptoethanol was performed at 80 °C in acetonitrile. Hydroxy end‐groups of the cotelomers were reacted with 2‐isocyanatoethyl methacrylate to give macromonomers. The P(TMSPMA‐stat‐PFDA) cotelomers, containing fluoro and silane groups, were then grafted onto silica nanoparticles. Optimal grafting conditions were found with TMSPMA monomer alone in toluene at 110 °C. The structure of the modified silica was analyzed by FTIR and ²⁹Si solid‐state NMR. The amount of grafted TMSPMA or P(TMSPMA‐stat‐PFDA) was calculated by thermogravimetric and elemental analyzes. The grafting yield increased with the copolymer/silica weight ratio until a maximum value of 2.26 μmol/m². © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4617–4628, 2009     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

The Structure of Hybrid Gels by Drift and NMR Spectroscopies

Hybrid inorganic-organic gels have been prepared by the sol-gel process using tetraethoxysilane (TEOS) as precursor, mixed with a low concentration of polytetrahydrofuran (PTHF), under acid catalysis. The hybrid xerogels were characterized by DRIFTS and Solid State ¹H, ¹³C and ²⁹Si NMR. The DRIFT spectra indicate that the polymer is responsible for decreasing the number of free silanol groups in comparison to pure silica. Solid-state NMR spectra reveal the types of silicate structures formed and the conditions for establishing chemical bonds between the two phases, which are responsible for the silica network flexibility. We have concluded that it is possible to design a hybrid gel with tailored properties, even at very low polymer concentration, by selecting the appropriate preparation route.     

Modification of Silica by Liquid Polybutadienes Containing Alkoxysilane Groups

Summary : The present work describes a method to modify the surface of silica, reducing its polar character and making it compatible and dispersible into hydrocarbon based elastomers. A liquid low molar mass polybutadiene (PB) was grafted with mercaptopropyltrimethoxysilane (MPTS) via radical addition of the thiol group to the double bonds. The silanized PB was reacted with silica via thermal condensation with its silanol groups. ²⁹Si NMR spectra showed that the condensation reaction of the trifunctional silane involved one or two alkoxy groups, while the third alkoxy group remained unreacted, probably for steric reasons. The characterization of the functionalized silica particles was performed by contact angle measurements and TGA analysis.     

A study of some deactivation methods for fused silica capillary columns by CP-MAS NMR and capillary gas chromatography

The effect of deactivating a fused silica surface by silylation with 1,1,3,3-tetraphenyl-1,3-dimethylilazane (TPDMDS), triphenylsilylamine (TPSA), and octamethylcyclotetrasiloxane (D4) and by polydimethylsiloxane degradation (PSD) is studied. Rehydrated, dried, and deactivated Cab-O-Sil M5 samples are used as model materials for ²⁹Si CP-MAS NMR analysis. At about 350 °C, TPDMDS yelds mainly diphenylmethylsiloxysilane, dimethyldisiloxysilane, and triphenylsiloxysilane groups. TPSA yields phenyltrisiloxysilane, diphenyldisiloxysilane, and triphenylsiloxysilane groups. At 400°C, the products formed initially are eventually replaced by methyltrisiloxysilane or phenyltrisiloxysilane groups, while a substantial number of silanol groups still remains. The possible consequences for wettability are discussed. D4 reacts with Cab-O-Sil even at 200°C, but a large number of silanol groups remains. This number decreases gradually at higher temperatures and becomes negligible above 400°C. The formation of methyltrisiloxysilane groups, which starts at 425°C, is predominant at 490°C.     

Revealing the Fine Details of Functionalized Silica Surfaces by Solid‐State NMR and Adsorption Isotherm Measurements: The Case of Fluorinated Stationary Phases for Liquid Chromatography

The structural and chromatographic characterization of two novel fluorinated mesoporous materials prepared by covalent reaction of 3‐(pentafluorophenyl)propyldimethylchlorosilane and perfluorohexylethyltrichlorosilane with 2.5 μm fully porous silica particles is reported. The adsorbents were characterized by solid state ²⁹Si, ¹³C, and ¹⁹F NMR spectroscopy, low‐temperature nitrogen adsorption, elemental analysis (C and F), and various chromatographic measurements, including the determination of adsorption isotherms. The structure and abundance of the different organic surface species, as well as the different silanol types, were determined. In particular, the degree of so‐called horizontal polymerization, that is, Si‐O‐Si bridging parallel to the silica surface due to the reaction, under “quasi‐dry” conditions, of trifunctional silanizing agents with the silica surface was quantified. Significant agreement was found between the information provided by solid‐state NMR, elemental analysis, and excess isotherms regarding the amount of surface residual silanol groups, on the one hand, and the degree of surface functionalization, on the other. Finally, the kinetic performance of the fluorinated materials as separation media for applications in near‐ultrahigh‐performance liquid chromatography was evaluated. At reduced velocities of about 5.5 (ca. 600 bar backpressure at room temperature) with 3 mm diameter columns and toluene as test compound, reduced plate heights on the order of 2 were obtained on columns of both adsorbents.     

Estimation of Silica Species’ Concentrations in Lithium and Magnesium Chloride Solutions from the Peak Intensities Observed by FAB-MS

The concentrations of dissolved silica species in electrolyte solutions were derived from the relative intensities of silica species, obtained from FAB-MS measurements (fast atom bombardment mass spectrometry), and the total concentration of dissolved silica. Generally, silica species in aqueous solutions form various complexes with cations such as sodium (Na⁺) or calcium (Ca²⁺), and it has been difficult to determine the concentration of each species. From the observed results from FAB-MS, the chemical species of silica dissolved in lithium chloride (LiCl) and magnesium chloride (MgCl₂) solutions do not include complexes with these cations, and thus Li⁺ and Mg²⁺ do not replace protons of the silanol groups in silica. Therefore, in LiCl and MgCl₂ solutions, all of the simple structures of silicate species can be identified. The concentration of each silica species was estimated on the basis of its mass spectra peak intensities and the total concentration of silica as determined by colorimetry. This study yields the concentration of each silica species within small errors, whereas conventional methods (such as ²⁹Si-NMR) have not yielded the concentrations of individual silica species. From these results, dimers and cyclic tetramers are concluded to be the main species in silica solutions with concentrations of at most 0.1 to 0.2 μmol⋅dm⁻³. This tendency should also occur in NaCl and CaCl₂ solutions, which are major electrolytes in natural waters.     

Solid-State NMR Study of Phase Separation and Order of Water Molecules and Silanol Groups in Polysiloxane Networks

Homogeneity and structure of organically modified polysiloxane networks prepared by sol-gel co-condensation, as well as location and nature of water molecules and silanol groups were studied by 1D and 2D solid-state NMR. ¹H–²⁹Si and ¹H–¹H interatomic distances were estimated from variable contact-time CP/MAS experiments, ¹H NMR chemical shifts and off-resonance WISE NMR. A structure model of these networks is proposed and discussed. The fraction of proton-inaccessible units Q⁴ in the networks decreases with increasing amounts of dimethylsiloxane (D) and methylsiloxane (T) units. In contrast to systems prepared by co-condensation of tetraethoxysilane (TEOS) with dimethyl(diethoxy)silane (DMDEOS), proton-inaccessible units form essential fraction in networks prepared by co-condensation of TEOS with methyl(triethoxy)silane (MTEOS). The proton-accessible part of the networks with high O/Si ratios is nano-heterogeneous phase, which is composed of water containing Q ⁱ particles separated by copolymer domains. The overall homogeneity and uniformity of binding sites around silanol groups increases by co-condensation TEOS with DMDEOS or MTEOS, while the amount of physisorbed water as well as the hydrogen bond strength decreases, as compared with neat silica gel prepared by polycondensation of TEOS.     

Chiral stationary phases for LC and SFC obtained by “Polymer coating”

Summary Chirally substituted Si–H-containing polysiloxanes were synthesized, which can be immobilized on small particle silica gel as well as on the smooth surfaces of fused silica capillaries. Immobilization is achieved either by crosslinking or by chemical bonding to the surfaces via silanol groups; both reactions can only be performed by addition of H₂PtCl₆, which acts as catalyst for hydrosilylation and as stoichiometric reagent for crosslinking. Chiral substituents of systematically varied chemical structure were introduced into the polysiloxanes by hydrosilylation. The mechanism of immobilization was investigated by spectroscopic methods, notably²⁹Si-NMR. Homogenous stationary-phase coatings of variable film thickness and corresponding retentivity can easily be achieved. The enantioselectivity of the phase systems was characterized in dependency on the chemical structure of the chiral selectors attached to the polysiloxane chain of the chiral stationary phases and also in terms of the functional groups introduced into the solutes by derivatisation.     

Morphology and grafting of oxazoline-functional polymer particles with various carboxylic acids

Oxazoline-functionalized, crosslinked PMMA-particles, prepared by free radical nonaqueous dispersion polymerization, were grafted with n-decanoic acid and carboxylic acid-terminated polystyrene. Oxazoline groups, separated by an alkylspacer from the PMMA backbone, showed enhanced mobility with respect to the backbone, as evaluated by solid-state NMR spectroscopy using a dipolar filter. As a function of molecular mass of the carboxylic acid, the oxazoline conversion varied from 70 mol % for n-decanoic acid to 1% for monocarboxylate-terminated polystyrene CT-PS with M_n: 15,900 g/mol. Morphological studies, performed by TEM, showed that reaction with acid terminated polystyrene results exclusively in interfacial grafting at the particle surface. At low grafting levels a raspberry-like morphology was obtained, whereas grafting levels exceeding 14 wt % CT-PS resulted in core-shell morphology. Core-shell morphology was also verified by static light scattering using toluene solvent, which is isorefractive to the PMMA core. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1821–1827, 1998     

Structural Insights into Peptides Bound to the Surface of Silica Nanopores

The structure and surface functionalization of biologically relevant silica-based hybrid materials was investigated by 2D solid-state NMR techniques combined with dynamic nuclear polarization (DNP). This approach was applied to a model system of mesoporous silica, which was modified through in-pore grafting of small peptides by solid-phase peptide synthesis (SPPS). To prove the covalent binding of the peptides on the surface, DNP-enhanced solid-state NMR was used for the detection of ¹⁵N NMR signals in natural abundance. DNP-enhanced heterocorrelation experiments with frequency switched Lee–Goldburg homonuclear proton decoupling (¹H–¹³C and ¹H–¹⁵N CP MAS FSLG HETCOR) were performed to verify the primary structure and configuration of the synthesized peptides. ¹H FSLG spectra and ¹H-²⁹Si FSLG HETCOR correlation spectra were recorded to investigate the orientation of the amino acid residues with respect to the silica surface. The combination of these NMR techniques provides detailed insights into the structure of amino acid functionalized hybrid compounds and allows for the understanding for each synthesis step during the in-pore SPPS.     

Deactivation by polysiloxane and phenyl containing disilazane: A 29SI CP-MAS NMR study after the formation of polysiloxane chains at the surface

A high degree of deactivation of glass and fused-silica capillary column walls is attainable by means of high temperature silylation (HTS) with or without a preceding leaching process. HTS with a phenyl containing disilazane, diphenyltetramethyldisilazane (DPTMDS), and polydimethylsiloxane (PDMS) are studied on Cab-O-Sil, a fumed silica, as a model substrate. Using ²⁹Si CP-MAS NMR, it was shown that no dimethylsiloxane chains were formed upon silylation with DPTMDS under different conditions of humidity and stoichiometry at 377°C. With DPTMDS deactivation it is possible that amino trisiloxy silane groups are formed, these groups add extra activity to the surface. Silylation with a PDMS, OV 101, at various temperatures between 300°–420°C did show that dimethylsiloxane chains were bonded at the surface. Using the ²⁹Si CP-MAS NMR technique with variable contact times to reveal siloxy group mobility, the degradation of dimethylsiloxane chains at the surface was studied. PDMS degradation at an optimal temperature gives a more effective diminuation of the silane activity caused by chemical reaction with the silanol groups and the effective screening of the remaining silanol groups with anchored polydimethylsiloxane chains and small cyclodimethylsiloxane ring structures at the surface.     

Radical graft polymerization of vinyl monomers onto nanoparticles in ionic liquid initiated by azo groups introduced onto the surface

The radical graft polymerization of vinyl monomers, such as styrene and methyl methacrylate, initiated by azo groups introduced onto silica nanoparticle and carbon black surfaces in room temperature ionic liquid (IL) were investigated. In this work, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) was used as IL. The percentage of polystyrene and poly(methyl methacrylate) grafting onto silica nanoparticle and carbon black increased with increasing reaction time. The percentage of grafting in IL was much larger than that in 1,4‐dioxane. The molecular weight of polystyrene grafted onto the silica surface in IL was almost equal to that in 1,4‐dioxane. The result indicates that the amount of grafted polystyrene in IL is five times that in 1,4‐dioxane. This may be due to the fact that lifetime of the surface radical formed by the group of azo is prolonged because of high viscosity of IL. Therefore, the surface azo groups were effectively used as initiating sites for the graft polymerization. In addition, the reduction of waste solvent was achieved by use of IL as reaction solvent, because unreacted monomer could be removed under vacuum after the reaction and the reuse of IL was easily achieved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1143–1149, 2007     

Solid-state NMR study of MCM-41-type mesoporous silica nanoparticles

A systematic study of the surface of MCM-41-type mesoporous silica nanoparticles prepared under low surfactant concentration was carried out using high-resolution solid-state nuclear magnetic resonance spectroscopy. The structures and concentrations of various species present during dehydration and rehydration of mesoporous silicas between -25 and 500 degrees C were detailed by employing one-dimensional and two-dimensional (1)H, (13)C, and (29)Si NMR, including (1)H signal intensity measurements, (1)H-(1)H homonuclear correlation experiments (double quantum, exchange, and RFDR), and (1)H-(29)Si heteronuclear correlation NMR. These experiments employed high MAS rates of up to 45 kHz. The study shows that the surfactant (CTAB) was almost completely removed by acid extraction. The residual molecules assumed prone positions along the pores, with the tailgroup being most mobile. The weakly adsorbed water was hydrogen bonded to the silanol groups, all of which were involved in such bonds under ambient humidity. Specific structures involving water and silanol groups were proposed for various stages of thermal treatment, which included dehydration, dehydroxylation, and subsequent rehydration.     

New hybrid membranes based on phosphonic acid functionalized silica particles for PEMFC

This work concerns the development of hybrid organic/inorganic membranes from styrenic phosphonic polymers. The phosphonic charge, composed phosphonic polymers grafted onto silica nanoparticles, was obtained by “grafting onto” method. It consists of synthesizing first the polymer, and then the terminal functions of the latter react with silanol groups of silica. The phosphonated polymer was isolated in two steps, that is, an ATRP polymerization of 4‐chloromethylstyrene followed by Mickaelïs‐Arbusov reaction. After the grafting onto silica, membranes are prepared through formulation containing the charge and the polymer matrix PVDF‐HFP, which are dispersed in DMF. The acid form is obtained by hydrolysis in chlorydric acid. The membrane possessing a 40 wt % charge ratio (IEC = 1.08 meq g^?1) was selected as reference. A proton conductivity of 65 mS cm^?1 at 80 °C was measured in immersed conditions. When the membrane is no more immersed, the value decreases drastically (0.21 mS cm^?1 at 120 °C and 25% RH). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Kinetics of interaction of 3-aminopropyltriethoxysilane with silica gel using elemental analysis and 29Si NMR spectra

 Three silica gel sample systems, modified with 3-amino-propyltriethoxy silane (APTS), were prepared by sequentially sampling the reaction mixture at various time intervals. The concentrations of 3-aminopropylsilyl groups (APS) bound on the silica surface were determined by elemental analysis. For the same sample systems, ²⁹Si NMR intensities of an (–O)₄Si species belonging only to the silica gel particles and corrected by a cross-polarization correction factor were also measured. Both the APS-concentrations and the correc-ted ²⁹Si NMR intensities depended upon reaction time, reflecting the rate of the APTS–silica gel reaction. Kinetic analysis of these data was made by use of the Gauss–Newton method, and the overall reaction was found to consist of three reaction processes (an initial fast reaction, a slower second reaction and a much slower third reaction). In particular, the conversion of (–O)₃SiOH to (–O)₄Si is predominant in the second reaction process and the pore size of a silica gel particle affects the reaction mechanism. Received: 1 November 1996 Accepted: 24 January 1997     

Covalent grafting of organoalkoxysilanes on silica surfaces in water-rich medium as evidenced by <Superscript>29</Superscript>Si NMR

This paper addresses two questions related to functionalization of silica particles: (1) is the grafting of hydrophobic organoalkoxysilanes on a silica surface possible in water-rich medium and (2) how to prove the formation of covalent bonds with the surface? Trimethylethoxysilane, dimethyldiethoxysilane and methyltriethoxysilane have been reacted with precipitated silica in water-rich medium (water/ethanol 25/75 v/v) and ²⁹Si MAS NMR was used to answer both questions: ²⁹Si chemical shift values of the organosilicon units in the case of trimethylethoxysilane and dimethyldiethoxysilane clearly distinguished between self-condensation reactions and surface reactions through covalent bonds.