A chain geometry prediction of polystyrene and polyarylate block copolymer by a kinetic simulation model

The chain geometry of polystyrene (PS) and polyarylate (PAr) block copolymer was predicted by the simulation of the kinetics of the block‐copolymerization route. The simulation model consisted of a combination of two models. In the first model, the kinetics of the free‐radical polymerization of carboxyl‐terminated telechelic PS (COOH‐PS‐COOH) was simulated for the determination of the molecular weight distribution. In the second model, the kinetics of the PS and PAr block copolymerization with COOH‐PS‐COOH was simulated by a Monte Carlo computation, with each reacting functional group assigned by an integer. The number‐average and weight‐average molecular weights and the composition of the PS‐PAr block copolymer, as calculated by the simulation models, were in good agreement with the experimental data. From this agreement, plausible predictions for the chain geometry (i.e., the type of block copolymer and length of each segment) were obtained that were practically impossible to analyze experimentally. The simulation results showed that more than 80 wt % of the block copolymer synthesized by this method was a composite of various types of multiblock copolymers and that the length of the PAr segment was almost the same as that of the homo‐PAr obtained as a by‐product. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 299–309, 2000     

Compatibilizing effect of polyarylate-polystyrene block copolymer in polyarylate/polystyrene blends

The compatibilizing effect of polyarylate-polystyrene (PAR-PS) block copolymer prepared from macroazo initiator was examined in polyarylate/polystyrene blends from the view-points of morphology, density, and thermal, mechanical, and rheological properties. PARPS block copolymer enhanced the mutual dissolution of the homopolymers. Reduced dispersed-domain size and increased density showed the efficiency of the block copolymer as a compatibilizing agent. Results from mechanical and rheological properties could also be explained by the compatibilizing effect of PAR-PS block copolymer in the blends. © 1994 John Wiley & Sons, Inc.     

A versatile approach for the preparation of end‐functional polymers and block copolymers by stable radical exchange reactions

A versatile strategy for the preparation of end‐functional polymers and block copolymers by radical exchange reactions is described. For this purpose, first polystyrene with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group (PS‐TEMPO) is prepared by nitroxide‐mediated radical polymerization (NMRP). In the subsequent step, these polymers are heated to 130 °C in the presence of independently prepared TEMPO derivatives bearing hydroxyl, azide and carboxylic acid functionalities, and polymers such as poly(ethylene glycol) (TEMPO‐PEG) and poly(ε‐caprolactone) (TEMPO‐PCL). Due to the simultaneous radical generation and reversible termination of the polymer radical, TEMPO moiety on polystyrene is replaced to form the corresponding end‐functional polymers and block copolymers. The intermediates and final polymers are characterized by ¹H NMR, UV, IR, and GPC measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2387–2395     

Syntheses and characterizations of polypropene,polystyrene and their block copolymers with titanocene catalysts

Pentamethylcyclopentadienyltitanium tribenzyloxide, Cp^*Ti(OBz)₃, was used as the catalyst precursor for polymerizations of propene and styrene. The titanocene catalyst affords atactic polypropene and syndiotactic polystyrene with high activities in the presence of methylalumimoxane (MAO). Block copolymerization of propene and styrene was carried out in the presence of Cp^*Ti(OBz)₃/MAO catalyst system by the means of external addition of triisobutylaluminum (TIBA) and sequential monomer feed. The copolymerization product is mainly a mixture of atactic polypropene(aPP) and syndiotactic polystyrene(sPS) homopolymers and aPP-b-sPS block copolymers, which can be separated into fractions with successive extraction with boiling methylethyl ketone(MEK), heptane, tetrahydrofuran(THF), and chloroform. Studies on thermal properties showed that rubbery phases and crystalline regions both appear in the block copolymer at the room temperature and that aPP-b-sPS block copolymer has better toughness than sPS.     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.     

新型线状-树枝状两亲嵌段共聚物的合成

本文设计合成了一系列由不同链长的聚丙烯酸(PAA)为亲水嵌段和不同代数聚苄醚树枝体(Dendr.PBE)为疏水嵌段的杂化共聚物(PAA-Dendr.PBE)。     

Coil-helix and sheet-helix block copolymers via macroinitiation from telechelic ROMP polymers

Coil-helix and sheet-helix block copolymers are synthesized by combining the ring-opening metathesis polymerization (ROMP) of norbornene or paracyclophanediene with the anionic polymerization of phenyl isocyanide. Key to the design is the use of an μ-ethynyl palladium (II) functionalized chain-transfer agent (CTA) that can be exploited in a stepwise manner for the termination of ROMP and the initiation of the anionic polymerization. Both the coil- and sheet-macroinitiators, and the ensuing covalent block copolymers, are analyzed using ¹H NMR spectroscopy and gel-permeation chromatography. In all cases, the Pd-end group is maintained and all polymers demonstrate a monomodal distribution with dispersities (Đ) of 1.1–1.4. The resulting helix-coil and helix-sheet block copolymers formed by the macroinitiation route still demonstrate their intrinsic properties (fluorescence, preferential helix-sense). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2991–2998     

Fluorinated star‐shaped block copolymers: Synthesis and optical properties

Tetrakis(4‐(1‐bromoethyl)phenyl)silane is synthesized and utilized to initiate the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) to generate bromo‐terminated four‐armed PMMA macroinitiators, which further initiate the ATRP of methylacryloyloxyl‐2‐hydroxypropyl perfluorooctanoate (FGOA) to create fluorinated star‐shaped block copolymers PMMA‐b‐poly(FGOA)s with fluorine content ranging from 0 to 31.7 wt %. The polymerizations are well controlled with the polydispersity indices <1.30. The polymers readily dissolve in common organic solvents and show good film‐formation. Compared with the nonfluorinated sample, the fluorinated films exhibit significantly increased water contact angles owing to the enrichment of fluorine on the surface. The enhanced hydrophobicity is advantageous for the optical stability when the devices work under a moist environment. Moreover, the films possess high thermo‐optic coefficients, tunable refractive indices, and extremely low birefringence coefficients because of the presence of bulky and rigid tetraphenylsilane core and star‐shaped topological structure, showing potential application in optical waveguide devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1969–1977     

Sequential photodecomposition of bisacylgermane type photoinitiator: Synthesis of block copolymers by combination of free radical promoted cationic and free radical polymerization mechanisms

A block copolymer of cyclohexene oxide (CHO) and styrene (St) was prepared by using bifunctional visible light photoinitiator dibenzoyldiethylgermane (DBDEG) via a two‐step procedure. The bifunctionality of the photoinitiator pertains to the sequential photodecomposition of DBDEG through acyl germane bonds. In the first step, photoinitiated free radical promoted cationic polymerization of CHO using DBDEG in the presence of diphenyliodonium hexafluorophosphate (Ph₂I⁺PF) was carried out to yield polymers with photoactive monobenzoyl germane end groups. These poly(cyclohexene oxide) (PCHO) prepolymers were used to induce photoinitiated free radical polymerization of styrene (St) resulting in the formation of poly(cyclohexene oxide‐block‐styrene) (P(CHO‐b‐St)). Successful blocking has been confirmed by a strong change in the molecular weight of the prepolymer and the block copolymer as well as NMR, IR, and DSC spectral measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4793–4799, 2009     

Synthesis and surface properties of fluorinated block copolymers containing sulfonic groups

A series of fluorinated block copolymers with different fluorinated block lengths and compositions were synthesized by atom transfer radical polymerization (ATRP), and then the block copolymers containing sulfonic groups with various sulfonation levels were successfully prepared further via a sulfonation reaction. These well‐defined block copolymers were characterized by means of Fourier transform infrared (FTIR), ¹H‐nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). The surface activities of the fluorinated block copolymers containing sulfonic groups in N‐methyl pyrrolidone solution and the surface properties of the films prepared from such a solution were examined, and the experimental results showed that the fluorinated block copolymers exhibited a high surface activity in solution and quite a low solid surface energy of films, even though they contain hydrophilic sulfonic groups. The critical surface tensions of these copolymers were estimated and were comparable to that of polytetrafluoroethylene. Even more interestingly, the surface activities of the block copolymers containing sulfonic groups or sodium sulfonate groups in aqueous solution were also measured. It was found that the surface activity in aqueous solution was weaker than that in N‐methyl pyrrolidone solution and depended on both the length of the fluorinated block and the sulfonation level of the block copolymers. The surface properties of the films prepared from the block copolymers in aqueous solution were tested, and most of these films exhibited a hydrophilic surface property. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4809–4819, 2004     

Compatabilization of polystyrene/polypropylene blends by styrene–butadiene block copolymers with differing polystyrene block lengths

Compatibilization of polystyrene/polypropylene (PS/PP) blends, by use of a series of butadiene–styrene block copolymers was studied by means of small‐angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM). The compatibilizers used differ in molar mass and the number of blocks. It was shown that the ability of a block copolymer (BC) to participate in the formation of an interfacial layer (and hence in compatibilization) is closely associated with the molar mass of styrene blocks. If the styrene blocks are long enough to form entanglements with the styrene homopolymer in the melt, then the BC is trapped inside this phase of the PS/PP blends, and its migration to the PS/PP interface is difficult. In this case, the BC does not participate in the formation of the interfacial layer nor, consequently, in the compatibilization process. On the other hand, the BC's with the molar mass of the PS blocks below the critical value are proved to be localized at the PS/PP interface. This preferable entrapping of some styrene–butadiene BC's in the PS phase of the PS/PP blend is, of course, connected to the differing miscibility of the BC blocks with corresponding components of this blend. Although the styrene block is chemically identical to the styrene homopolymer in the blend, the butadiene block is similar to the PP phase. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1647–1656, 1999     

ABA triblock copolymers from two mechanistic techniques: Polycondensation and atom transfer radical polymerization

ABA triblock copolymers were synthesized using two polymerization techniques, polycondensation, and atom transfer radical polymerization (ATRP). A telechelic polymer was synthesized via polycondensation, which was then functionalized into a difunctional ATRP initiator. Under ATRP conditions, outer blocks were polymerized to form the ABA triblock copolymer. Six types of samples were prepared based on a poly(ether ether ketone) or poly(arylene ether sulfone) center block with either poly(methyl methacrylate), poly(pentafluorostyrene), or poly(ionic liquid) outer blocks. As polycondensation results in polymers with broad molecular weight distribution (MWD), the center of these triblock copolymers are disperse, while the outside blocks have narrow MWD due to the control afforded from ATRP. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 228–238     

Synthesis of styrene–acrylonitrile random copolymers (SAN) and polyarylate block copolymers and the control of their mechanical properties by morphology generation

The idea of repulsion in random copolymers was applied to the miscibility modification between polystyrene (PS) and polyarylate (PAr) segments of PS–PAr block copolymer (PAr–PS–PAr). Acrylonitrile (AN), which has a large positive interaction parameter against styrene, was used as a miscibility modifier toward PAr segments. AN was introduced into the carboxyl terminated telechelic‐PS at AN wt % ranging from 12 to 37 wt %. Based on these telechelic acrylonitrile–styrene random copolymers (SAN_x's where x represents AN wt %), SAN_x and PAr block copolymers (PAr–SAN_x–PAr's) were synthesized. The miscibility of SAN_x and PAr segments was estimated from the results of DSC with Fox's equation and spin–spin relaxation time measured by pulsed NMR. These results evidenced that the miscibility between PS and PAr segments can be modified by introducing AN into PS segments. The estimated volume fraction of the interfacial layer between SAN_x and PAr segments was increased as x was increased toward 24 wt %, around which the predicted miscibility reaches a maximum. Above that AN wt %, it began to decrease. The flexural strength increased as the miscibility between SAN_x and PAr segments increased. In particular, when x was between 20 and 30 wt %, PAr–SAN_x–PAr exhibited three times larger flexural strength than PAr–PS–PAr. The fracture behavior changed from brittle to ductile, even though the telechelic SAN_x by themselves exhibited almost the same fracture strength as the telechelic PS. The results of dynamic mechanical measurements and the percolation model suggested that around these AN wt % the continuum matrices in PAr–SAN_x–PAr changed from SAN_x phase to a cocontinuous phase of SAN_x and PAr. From these results, PAr–SAN_x–PAr was explained to perform such a high flexural strength by this phase change in the continuum matrices. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 127–137, 2000     

Synthesis of well-defined poly(p-benzamide) from chain-growth polycondensation and its application to block copolymers

Poly(p-benzamide) with a defined molecular weight and a low polydispersity and block copolymers containing this well-defined aramide was synthesized. Phenyl 4-(4-octyloxybenzylamino)benzoate ( 1b ) polymerized at room temperature in the presence of base and phenyl 4-nitrobenzoate ( 2a ) as an initiator in a chain-growth polycondensation manner to give well-defined aromatic polyamides having the 4-octyloxybenzyl groups as a protecting group on nitrogen in an amide. It was confirmed by a model reaction that deprotection of this protecting group proceeded completely with trifluoroacetic acid (TFA) without breaking the amide linkage. The utility of this approach to poly(p-benzamide) with a low polydispersity was demonstrated by the synthesis of block copolymers of poly(p-benzamide) and poly(N-octyl-p-benzamide) or poly(ethylene glycol). The SEM images of the supramolecular assemblies of the former block copolymer showed μm-sized bundles and aggregates of flake structures.     

Synthesis and properties of polydimethylsiloxane-containing block copolymers via living radical polymerization

Polydimethylsiloxane (PDMS) block copolymers were synthesized by using PDMS macroinitiators with copper-mediated living radical polymerization. Diamino PDMS led to initiators that gave ABA block copolymers, but there was low initiator efficiency and molecular weights are somewhat uncontrolled. The use of mono- and difunctional carbinol–hydroxyl functional initiators led to AB and ABA block copolymers with narrow polydispersity indices (PDIs) and controlled number-average molecular weights (M_n's). Polymerization with methyl methacrylate (MMA) and 2-dimethylaminoethyl methacrylate (DMAEMA) was discovered with a range of molecular weights produced. Polymerizations proceeded with excellent first-order kinetics indicative of living polymerization. ABA block copolymers with MMA were prepared with between 28 and 84 wt % poly(methyl methacrylate) with M_n's between 7.6 and 35 K (PDI <1.30), which show thermal transitions characteristic of block copolymers. ABA block copolymers with DMAEMA led to amphiphilic block copolymers with M_n's between 9.5 and 45.7 K (PDIs of 1.25–1.70), which formed aggregates in solution with a critical micelle concentration of 0.1 g dm⁻³ as determined by pyrene fluorimetry experiments. Monocarbinol functional PDMS gave AB block copolymers with both MMA and DMAEMA. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1833–1842, 2001     

Synthesis and characterization of novel dendritic (arborescent,hyperbranched) polyisobutylene–polystyrene block copolymers

The synthesis of novel arborescent (arb; randomly branched, “tree‐like,” and often called “hyperbranched”) block copolymers comprised of rubbery polyisobutylene (PIB) and glassy polystyrene (PSt) blocks (arb‐PIB‐b‐PSt) is described. The syntheses were accomplished by the use of arb‐PIB macroinitiators (prepared by the use of 4‐(2‐methoxyisopropyl) styrene inimer) in conjunction with titanium tetrachloride (TiCl₄). The effect of reaction conditions on blocking of St from arb‐PIB was investigated. Purified block copolymers were characterized by ¹H NMR spectroscopy and Size Exclusion Chromatography (SEC). arb‐PIB‐b‐PSt with 11.7–33.8 wt % PSt and M_n = 468,800–652,900 g/mol displayed thermoplastic elastomeric properties with 3.6–8.7 MPa tensile strength and 950–1830% elongation. Samples with 26.8–33.8 wt % PSt were further characterized by Atomic Force Microscopy (AFM), which showed phase‐separated mixed spherical/cylindrical/lamellar PSt phases irregularly distributed within the continuous PIB phase. Dynamic Mechanical Thermal Analysis (DMTA) and solvent swelling of arb‐PIB‐b‐PSt revealed unique characteristics, in comparison with a semicommercial PSt‐b‐PIB‐b‐PSt block copolymer. The number of aromatic branching points of the arb‐PIB macroinitiator, determined by selective destruction of the linking sites, agreed well with that calculated from equilibrium swelling data of arb‐PIB‐b‐PSt. This method for the quantitative determination of branching sites might be generally applicable for arborescent polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1811–1826, 2005     

Synthesis of miktoarm star and miktoarm star block copolymers via a combination of atom transfer radical polymerization and stable free‐radical polymerization

A trifunctional initiator, 2‐phenyl‐2‐[(2,2,6,6‐tetramethyl)‐1‐piperidinyloxy] ethyl 2,2‐bis[methyl(2‐bromopropionato)] propionate, was synthesized and used for the synthesis of miktoarm star AB₂ and miktoarm star block AB₂C₂ copolymers via a combination of stable free‐radical polymerization (SFRP) and atom transfer radical polymerization (ATRP) in a two‐step or three‐step reaction sequence, respectively. In the first step, a polystyrene (PSt) macroinitiator with dual ω‐bromo functionality was obtained by SFRP of styrene (St) in bulk at 125 °C. Next, this PSt precursor was used as a macroinitiator for ATRP of tert‐butyl acrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C, affording miktoarm star (PSt)(PtBA)₂ [where PtBA is poly(tert‐butyl acrylate)]. In the third step, the obtained St(tBA)₂ macroinitiator with two terminal bromine groups was further polymerized with methyl methacrylate by ATRP, and this resulted in (PSt)(PtBA)₂(PMMA)₂‐type miktoarm star block copolymer [where PMMA is poly(methyl methacrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.38). All polymers were characterized by gel permeation chromatography and ¹H NMR. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2542–2548, 2003     

Synthesis and characterization of polymethylphenylsilane–polystyrene block copolymers

Block copolymers of polymethylphenylsilane (PMPS) and polystyrene (PS) have been successfully prepared by the condensation of α,ω-dichloro-polymethylphenylsilane with polystyryl-lithium. These new materials have been characterized by UV spectroscopy, ²⁹Si-NMR, and size exclusion chromatography. These block copolymers show a good emulsifying activity to compatibilize blends of the two homopolymers (PMPS and PS). © 1993 John Wiley & Sons, Inc.     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

The TIT-Inifer Method of synthesis of block copolymers

A two-step free radical method of synthesis of block copolymers, called TIT-Inifer Method is proposed. In the method, specially designed initiators/transfer agents of the general formula TIT (called herein: TIT-Inifers) are used, where: T represents transfer groups, I is an initiator fragment, and SPACER is any skeleton, that separates the radical center formed at T during transfer reaction from interaction with the initiator fragment. In the first step of the method, a monomer A is polymerized in the presence of a TIT-Inifer at some temperature T₁, at which the initiator fragment of the inifer is stable. In that step the TIT-Inifer acts as a transfer agent, so that the initiator fragment gets incorporated into polymer chain to yield a macroinitiator. In the second step of the method, the macroinitiator is used to initiate polymerization of a monomer B at a temperature T₂, at which the initiator groups of the macroinitiator cleave. Depending of the mode of termination of growing polymer chains, AB-type or ABA-type block copolymers are obtained as the major product, altogether with some amount of homopolymers resulting from side reactions of macroradicals. Two example TIT-Inifers were designed and their application for synthesis of block copolymers was studied. It was found that the TIT-Inifer Method was effective for preparation of block copolymers. Aspects of the mechanism by which the TIT-Inifers attach initiator groups to polymer chains and applicability of the TIT-Inifer Method for large-scale production of block copolymers are discussed. © 1996 John Wiley & Sons, Inc.