Structure and physical properties of segmented polyurethane elastomers containing chemical crosslinks in the hard segment

Two series of segmented polyurethanes, one containing 50% soft segments and the other with 70% soft segments were synthesized. Chemical crosslinks were introduced through the hard segment in a controlled way. Chemical polyurethane networks were characterized by swelling. The effect of the degree of crosslinking on properties was examined. It was found that chemical crosslinks in the hard segment reduce the mobility of the soft phase and destroy the crystallinity of the hard phase, but they improve heat stability of the hard domains. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 221–235, 1998     

The influence of soft segments on some properties of new transparent segmented polyurethanes

This work describes the synthesis and structure of the new segmented polyurethanes (SPURs) formed from an aliphatic diisocyanate [1,1′‐methanediylbis(4‐isocyanatocyclohexane] (Desmodur W^®) and unconventional sulfur‐containing chain extender [2,2′‐methylenebis([4,1‐phenylene]methylenesulfanediyl)diethanol]. Soft segments were poly(oxytetramethylene)diol of  = 1000 g/mol (PTMO) or poly(hexametylene carbonate)diol of  = 860 g/mol (PHCD). For all the polymers, the structure, physicochemical, thermal, and mechanical properties were determined. In addition, for selected polymers, optical properties (refractive index and transparency), adhesive properties, and antimicrobial activity were also determined. The type and amount of soft segment used for the synthesis of SPURs had a significant effect on the properties of the polymers. SPURs from PHCD are characterized by higher glass transition temperatures, molar masses, hardness (up to 91/50°Sh in scale A/D), and tensile strengths (up to 36.5 MPa) but lower elongations at break compared with the SPURs with PTMO. The tests of adhesion and optical properties showed that the PHCD‐based SPUR was characterized by higher value of refractive index, transparency, and more than three times the adhesive strength than the PTMO‐based SPUR. Antimicrobial activity studies showed that the SPUR presence in the medium inhibited proliferation of both Gram‐positive and Gram‐negative bacteria. Copyright © 2017 John Wiley & Sons, Ltd.     

Amphiphilic segmented polyurethanes as surface modifying additives

Amphiphilic segmented polyetherurethanes were prepared from methylene diphenylene diisocyanate (MDI), poly(ethylene glycol) 1500 (PEG), and a fatty acid monoglyceride as a chain extender. The polymers were not soluble in water or methanol, but dissolved readily in organic solvents. The amphiphilic properties were demonstrated as a large hysteresis in the water contact angles, exceeding 110°. The amphiphilic polymers were shown to modify the surface properties of a poly(ether urethane) (PEU) and a poly(ether urethane urea) (PEUU) when added in 1–10 wt %, presumably due to migration of the additive to the surface. The surfaces of particularly the PEU blends became highly amphiphilic, exhibiting contact angles hystereses up to 90–100°. A surface saturation effect was observed at 5% added amphiphilic polymer. A difference in the behavior of PEU and PEUU was ascribed to differences in solubility of the additive in the matrix. On long-term exposure to water the PEUU blends increased their amphiphilic behavior.     

Probing the dielectric response of polyurethane/alumina nanocomposites

The dielectric properties of polyurethane (PUR) latex–boehmite alumina nanocomposites were investigated by means of broadband dielectric spectroscopy in the temperature range ?100 °C to 70 °C. The concentration of the filler (alumina) was kept constant at 10 phr for all specimens, whereas the mean particle diameter (namely 220, 90, and 25 nm) of the incorporated nanoparticles varied accordingly. For reasons of comparison, pure PUR was also examined. Four distinct relaxation modes were recorded in the spectra of all systems. They were attributed to interfacial polarization, glass transition (α‐relaxation), local motions of polar side groups, and chain segments (β‐relaxation and γ‐relaxation). All four relaxation processes exhibit a symmetric distribution of relaxation times, which in the case of interfacial polarization, becomes narrower. The intensity of interfacial polarization increases with the reduction of the mean particle diameter indicating enhanced interfacial area. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Dynamic mechanical properties of poly-ether-urethane elastomers with chain-extended or chain-folded molecularly uniform poly (N-alkylurethane) hard segment domains

Segmented polyetherurethanes with distinctively different morphologies, i.e., with chain-extended or chain-folded crystallized hard segments, could be created by small constitutional changes in the hard segment architecture. The different superstructure was achieved by building-in specially designed constitutional units in the middle of the otherwise regularly built hard segment which for flexibility or sterical reasons allowed an adjacent reentry chain-folded and/or chain-extended crystallization of the hard phase forming polyurethane segments. The material properties of the thermoplastic elastomers correlated systematically with the hard domain superstructure which was determined by the primary structure of the macromolecule and could be reversibly altered by the thermal history in the case of the flexible center unit. The softening temperature was determined by the hard domain height of the chain-folded lamellar or the chain-extended cylindrical domains; variation of the modulus in the elastomeric region could be related to imperfections in the hard segment packing which affected the effective hard domain filler.     

Effect of filler shape on mechanical properties of rigid polyurethane composites containing plant particles

The effect of types of fillers on mechanical properties of rigid polyurethane composite samples was investigated. Polyurethane (PU) composites were prepared using a molasses polyol (MP, a mixture of molasses and polyethylene glycol, Mw=200) diphenylmethane diisocyanate (MDI) and fillers. The following plant particles, bamboo powder, roast bamboo powder, wood meal, coffee grounds, ground coffee bean parchment and cellulose powder, were used as fillers. The mixture of MP and fillers was reacted with MDI by adding an adequate amount of acetone as a solvent. The content of fillers was defined as the ratio of filler weight to total weight of polyol and fillers. The filler content was varied from 10 to 90 wt%. Polyurethane (PU) composites were prepared using fillers with MP. Lengths of major axis and minor axis for each particle regarded as an ellipse were measured using an optical microscope. Averages of diameter and aspect ratio were derived for each plant particle. The relationships between these average values and the mechanical properties, such as strength and elastic modulus, determined by the compression tests were investigated. The effect of filler content was estimated using the apparent volume ratio which is determined as the ratio of the apparent volume of fillers to the reciprocal values of the apparent density of samples. The master curves of the relationships between the specific values of mechanical properties and the apparent volume ratio were obtained. It was found that the compression strength and the elastic modulus for composite samples with different fillers showed maximum values at average aspect ratio around 3. It was also found that the apparent volume ratio, where the mechanical properties showed maximums, decreases with increasing aspect ratio. Using master curves, it is possible to evaluate the mechanical properties of plant particle filled polyurethane composites are described.     

Random thermotropic elastomers. I. Effects of substitution and hard/soft segment lengths on properties

Syntheses of segmented copoly(ether-ester)s with (oxy-2-methyl-1,4-phenyleneoxycarbonyl-1,4-phenylene carbonyl)/(oxy-2-chloro-1,4-phenyleneoxycarbonyl-1,4-phenylene carbonyl) (methyl-/chloro-substituted) hard segments and poly(oxytetramethylene) soft segments, are reported. The methodology consisted of staged addition melt condensation of terephthaloyl chloride, poly(oxytetramethylene)glycol (POTMG; \[ \bar M_n \] = 250, 650, 1000, 2000) and methyl-/chloro-hydroquinone. Lengths of hard and soft segments were varied while the weight ratio of hard to soft segment was maintained constant. Copolymers were characterised for solubility behavior, and by infrared spectroscopy, x-ray diffraction, DSC, and polarizing microscopy. Thermal properties were found to be dependent on length of soft segment as well as on the type of substituent in the mesogenic core. In both methyl- as well as chloro-substituted copoly(ether-ester)s soft segment glass transition temperature (T_gs) was obtained between ?40 and ?50°C. All copoly(ether-ester)s are elastomeric at room temperature (25°C). These polymers exhibit thermotropic liquid crystalline behavior and were easily sheared and aligned in liquid crystalline state. © 1994 John Wiley & Sons, Inc.     

Aggregation structure and mechanical properties of functionally graded polyurethane elastomers

Functionally graded polyurethane elastomers (FGPUEs) were prepared with two molds fixed at different temperatures (30 and 150 °C). The effects of the molar ratio of the curing agent (60/40, 75/25, or 97/3 1,4‐butane diol/1,1,1‐trimethylol propane) and the molecular weight of the polymer glycol (number‐average molecular weight = 2000 or 3000) on the molecular aggregation state and mechanical properties of the FGPUEs were investigated with differential scanning calorimetry, polarized optical microscopy, dynamic viscoelastic measurements, and tensile tests. The aggregation state of the FGPUEs was changed continuously from the one side (lower temperature side) to the other side (higher temperature side); for example, the glass‐transition temperature gradually increased in this direction. Also, the number of spherulites formed in the FGPUEs increased in the same manner. In the mechanical tests, the tensile strength and elongation at break of the lower temperature side were higher than those of the higher temperature side. This was correlated with the strong phase separation of the lower temperature side. The poly(oxytetramethylene glycol)‐based FGPUE with a chain extender of 75 wt % showed the largest degree of the temperature gradient. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2355–2363, 2003     

Effect of the composition ratio of copolymerized poly(carbonate) glycol on the microphase‐separated structures and mechanical properties of polyurethane elastomers

Randomly copolymerized poly(carbonate) glycols were employed as starting materials for the synthesis of polyurethane elastomers (PUEs). The poly(carbonate) glycols had hexamethylene (C₆) and tetramethylene (C₄) units between carbonate groups in various composition ratios (C₄/C₆ = 0/100, 50/50, 70/30, and 90/10), and the number‐average molecular weights of these poly(carbonate) glycols were 1000 and 2000. The PUEs were synthesized with these poly(carbonate) glycols, 4,4′‐diphenylmethane diisocyanate, and 1,4‐butanediol by a prepolymer method. Differential scanning calorimetry measurements revealed that the difference between the glass‐transition temperature of the soft segment in the PUEs and the glass‐transition temperature of the original glycol polymer decreased and the melting point of the hard‐segment domain increased with an increasing C₄ composition ratio. The microphase separation of the poly(carbonate) glycol‐based PUEs likely became stronger with an increasing C₄ composition ratio. Young's modulus of these PUEs increased with an increasing C₄ composition ratio. This was due to increases in the degree of microphase separation and stiffness of the soft segment with an increase in the C₄ composition ratio. The molecular weight of poly(carbonate) glycol also influenced the microphase‐separated structure and mechanical properties of the PUEs. The addition of different methylene chain units to poly(carbonate) glycol was quite effective in controlling the microphase‐separated structure and mechanical properties of the PUEs. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4448–4458, 2004     

Synthesis,structural characterization,and properties of polyurethane elastomers containing various degrees of unsaturation in the chain extenders

We prepared polyurethane block copolymers with both 50 and 70% soft segment concentrations, using 4,4′‐diphenylmethane diisocyanate–poly(propylene glycol) prepolymer and 1,4‐butanediol, cis‐2‐butene‐1,4‐diol, and 2‐butyne‐1,4‐diol as chain extenders. The effects of the different chain extenders were observed during synthesis and in the final products. A comparison of spectroscopic, mechanical, and thermal data reveals that polymer properties can be significantly altered by differences in chemical bonding within the chain extender backbone. Although all data support the expected differences in phase morphology between the two series of samples, they also suggest that increasing chain extender unsaturation reduced reactivity with isocyanate, adversely affected hydrogen bonding, lowered the degree of crystallinity of the hard segments, and decreased phase separation. The tensile strength, elongation, modulus, and elastic recovery decreased and the electrical conductivity of iodine‐doped samples increased with increasing chain extender unsaturation. The thermal stability of the urethane group was also lower in samples with increased unsaturation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1316–1333, 2002     

Preparation and dielectric properties of polyimide foams containing crosslinked structures

In order to obtain cellular materials with low dielectric properties, crosslinked polyimide foams were prepared using 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), 4,4′‐oxydianiline (ODA) and 2,4,6‐triaminopyrimidine (TAP) as monomer via a poly(ester‐amine salt) precursor process. The structures of the precursors and the polyimide foams were characterized by thermogravimetric analysis (TGA) and FT‐IR, while the morphologies of the polyimide foams were viewed from scanning electron microscopy (SEM) measurements. The results revealed that the poly(ester‐amine salt) precursor containing TAP could successfully be converted to a crosslinked polyimide foam with relatively uniform cell structure. Also, the crosslinking of TAP improved the mechanical properties of foams in comparison with the non‐crosslinking systems. With increasing content of TAP, the dielectric constants of the polyimide foams decreased gradually. For the foam with TAP molar ratio at 15%, the dielectric constant was as low as 1.77 at the frequency of 10 kHz. Though the thermal resistance decreased slightly for crosslinked foams, the decomposition temperatures were still maintained above 520°C. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and characterization of waterborne polyurethane/polyhedral oligomeric silsesquioxane composites with low dielectric constants

A facile method was developed to synthesize a new type of polyhedral oligomeric silsesquioxane (POSS). It contained a single amine group and seven aliphatic moieties on its corners. FT‐IR, ¹H‐NMR, ¹³C‐NMR, ¹³C‐¹H COSY, and ¹H‐¹H COSY confirmed that cages with eight corners were the main part of the product. This new POSS was used to modify the structure of hexamethylene diisocyanate trimer and then copolymerized with hexamethylene diisocyanate and poly (tetramethylene glycol) to get a serious of waterborne polyurethane (WPU)/POSS hybrid materials with low dielectric constants for microelectronics applications. The results showed that POSS particles were uniformly dispersed in the WPU dispersions. The WPU/POSS films did not show any macrophase separation, even when the POSS content was as high as 16%. As the POSS content increased from 0% to 16%, the tensile strength was increased from 2.3 to 7.3 MPa, the dielectric constant was decreased from about 2.9 to 2.0, and the thermal stability of the WPU/POSS was also improved.     

Diaminobisbenzothiazole chain extended polyurethanes as a novel class of thermoplastic polyurethane elastomers with improved thermal stability and electrical insulation properties

This work was devoted to the development of a new class of modified polyurethane as an electrical insulating material. For this purpose, NCO‐terminated urethane prepolymers at different NCO contents were prepared and chain extended by 6,6′‐oxybis(2‐aminobenzothiazole) (ABT) to produce thermoplastic polyurethane elastomers. All of the polymers were characterized by FTIR and ¹HNMR spectroscopies and examined for their thermal, mechanical, and electrical properties. The dynamic mechanical measurements results showed two glass transitions indicating phase separation. A considerable improvement in the thermal and electrical properties in comparison to common polyurethanes was detected for these polymers. The level of enhancement in the measured properties was related to the polyol molecular weight, hard segment content, and consequently the amount of the introduced urea and benzothiazole moieties. These findings indicated the improved high service temperature performance of these materials as electrical insulator for metallic surfaces. Copyright © 2008 John Wiley & Sons, Ltd.     

Structure and dielectric properties of a thermoplastic blend containing dispersed metal

In the present work broadband dielectric relaxation spectroscopy measurements were employed to investigate the dielectric properties of polymer composites. A polyethylene/polyoxymethylene (PE/POM) thermoplastic blend was used as a matrix, while the inclusions were iron (Fe) particles. For comparison, the two pure polymers- PE and POM- were used as a matrix, too. In the PE/POM-Fe composites, the polymer matrix is two-phase and the filler particles are localized only in the POM phase, resulting in an ordered distribution of the dispersed filler particles within the blend. In PE-Fe and POM-Fe composites, the filler spatial distribution is random. The behaviour of all the composites studied is described in terms of the percolation theory. The PE/POM-Fe composites, based on the PE/POM blend, demonstrate different electrical behaviour compared to that of POM-Fe and PE-Fe systems. The percolation threshold value of the PE/POM-Fe composites was found much lower than that of the other two systems. The results were related to the microstructure of the composites. A schematic model for the morphology of the composites studied has been proposed. This model explains the peculiar behaviour of the PE/POM-Fe composites by taking into account the ordered distribution of the filler particles in a binary polymer matrix. Optical microscopy photographs confirm this model.     

Effect of side groups of polymer glycol on microphase‐separated structure and mechanical properties of polyurethane elastomers

The effect of side methyl and dimethyl groups of the soft segment component on the microphase‐separated structure and mechanical properties of polyurethane elastomers (PUEs) was investigated. Poly(oxytetramethylene) glycol (PTMG), and PTMG incorporating dimethyl groups (PTG‐X) and methyl side groups (PTG‐L) were used as a polymer glycol, which forms a soft segment in the PUEs. The PUEs were synthesized with 4,4′‐dipheylmethane diisocyanate [1,1′‐methylenebis(4‐isocyanatobenzene)], 1,4‐butane diol, and 1,1,1‐trimethylol propane by a prepolymer method. The degree of microphase separation of the PUEs became weaker with increasing side group content in polymer glycols. Dynamic viscoelastic properties measurement showed reorganized‐crystallization and melting of the soft segment for the PUEs based on PTMG, PTG‐L, and PTG‐X with a lower content of the side groups, but not for a PTG‐L and PTG‐X with higher content of the side groups. Tensile testing revealed that increasing methyl group concentration made the PUEs soften and weaken. The PTMG‐based PUEs obviously exhibited strain‐induced crystallization of the soft segment chains during elongation process. In contrast, for the PTG‐L and PTG‐X‐based PUEs, crystallinity decreased with increasing side group content, and the PUEs with PTG‐L and PTG‐X with highest methyl group content did not crystallize even at a large strain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2054–2063, 2008     

Solid polymer electrolytes III: Preparation,characterization, and ionic conductivity of new gelled polymer electrolytes based on segmented,perfluoropolyether‐modified polyurethane

New segmented polyurethanes with perfluoropolyether (PFPE) and poly(ethylene oxide) blocks were synthesized from a fluorinated macrodiol mixed with poly(ethylene glycol) (PEG) in different ratios as a soft segment, 2,4‐toluene diisocyanate as a hard segment, and ethylene glycol as a chain extender. Fourier transform infrared, NMR, and thermal analysis [differential scanning calorimetry and thermogravimetric analysis (TGA)] were used to characterize the structures of these copolymers. The copolymer films were immersed in a liquid electrolyte (1 M LiClO₄/propylene carbonate) to form gel‐type electrolytes. The ionic conductivities of these polymer electrolytes were investigated through changes in the copolymer composition and content of the liquid electrolyte. The relative molar ratio of PFPE and PEG in the copolymer played an important role in the conductivity and the capacity to retain the liquid electrolyte solution. The copolymer with a 50/50 PFPE/PEG ratio, having the lowest decomposition temperature shown by TGA, exhibited the highest ionic conductivity and lowest activation energy for ion transportation. The conductivities of these systems were about 10^?3 S cm^?1 at room temperature and 10^?2 S cm^?1 at 70 °C; the films immersed in the liquid electrolyte with an increase of 70 wt % were homogenous with good mechanical properties. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 486–495, 2002; DOI 10.1002/pola.10119     

Synthesis and characterization of poly(dimethylsiloxane‐urethane) elastomers: Effect of hard segments of polyurethane on morphological and mechanical properties

A series of poly(dimethylsiloxane‐urethane) elastomers based on hexamethylenediisocyanate, toluenediisocyanate, or 4,4′‐methylenediphenyldiisocyanate hard segment and polydimethylsiloxane (PDMS) soft segment were synthesized. In this study, a new type of soft‐segmented PDMS crosslinker was synthesized by hydrosilylation reaction of 2‐allyloxyethanol with polyhydromethylsiloxane, using Karstedt's catalyst. The synthesized soft‐segmented crosslinker was characterized by FT‐IR, ¹H, and ¹³C NMR spectroscopic techniques. The mechanical and thermal properties of elastomers were characterized using tensile testing, thermogravimetric analysis, differential scanning calorimetry (DSC), and dynamical mechanical analysis measurements. The molecular structure of poly(dimethylsiloxane‐urethane) membranes was characterized by ATR‐FTIR spectroscopic techniques. Infrared spectra indicated the formation of urethane/urea aggregates and hydrogen bonding between the hard and soft domains. Better mechanical and thermal properties of the elastomers were observed. The restriction of chain mobility has been shown by the formation of hydrogen bonding in the soft and hard segment domains, resulting in the increase in the glass‐transition temperature of soft segments. DSC analysis indicates the phase separation of the hard and soft domains. The storage modulus (E′) of the elastomers was increasing with increase in the number of urethane connections between the hard and soft segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2980–2989, 2006     

1,5-萘二异氰酸酯与1,4-丁二醇基为基质的多嵌段聚氨酯弹性体的合成与性能

利用 1 ,5_萘二异氰酸酯 (NDI)和 1 ,4_丁二醇 (BDO)为均匀硬质分子单体 ,与不同软质分子单体 (聚醚、聚酯、聚硅氧烷 )缩合制备多嵌段聚氨酯弹性体 ,详细研究了硬嵌段相 (NDI)弹性体的结构与性能间的关系 ,发现随着硬嵌段相长度的增加 ,或者氨基甲酸酯中胺基与聚醚、聚酯、聚硅氧烷中软段氧原子间氢键的减弱 ,都导致微相分离程度的增加 ,造成聚合物熔点和熔化热的升高。硬嵌段相熔化的多峰行为是由于形成了NDI/BDO半微晶区 ,在退火时转变为更加有序的结晶微区 ,当温度高于 1 80℃时 ,由于氢键的断裂 ,NDI/BDO硬嵌段发生分解反应 ,该过程源于不很有序的硬嵌段半结晶微区。当温度高于 2 5 0℃时 ,发生快速的分解。在动态力学行为方面 ,NDI基聚醚弹性体比其它硅氧烷基的弹性体展示了更高的硬嵌段区的稳定性 ,同时 ,在使用温度范围内 ,也显示出最高的储能模量值 ,表明刚性对温度的依赖性 ,以及NDI/BDO硬嵌段中活性填料的显著影响     

Theoretical investigation of polymer molecular structure influence on dielectric properties and mechanical properties

Triboelectric nanogenerator (TENG) technologies have explosive development in the field of energy harvesting and self-powered sensing. As the key element of triboelectric devices, dielectric polymers have obtained much attention in recent years. The dielectric properties of polymer determine the output performance of TENG. In this paper, we take silicone rubber as an example of dielectric polymers, to study the properties of molecular structure influence on the dielectric properties and mechanical properties by the molecular dynamics simulation method. The free volume fraction, dielectric constant, and mechanical properties of silicone rubbers with different branch chains were calculated. The dielectric constant is highly related to the free volume distribution and the dipole moments of silicone rubbers with different amounts of branch chains. For fewer branch chains silicone rubber, the free volume distribution contributes most to the dielectric constant; for more branch chains silicone rubber, the dipole moment dominates the dielectric constant. Therefore, the silicone rubber ratio has a great influence on the dielectric constant of silicone rubber. With the increase of temperature, the dielectric constant of 2-chain silicone rubber increases at first and then decreases, and the maximum value is obtained near 300 K. Therefore, it is necessary to control the temperature when silicone rubber is used as a dielectric material. This work can be a guide for improving the dielectric properties of silicone rubber, and it provides a new approach to the optimal design of high-performance triboelectric nanogenerators.