Penultimate effect in radical copolymerization of 2‐trifluoromethylacrylates

Electron‐deficient 2‐trifluoromethylacrylates (TFMA) undergo radical copolymerization with electron‐rich norbornene derivatives, vinyl ethers, and styrene derivatives, which can be described by the penultimate model much better than by the commonly employed terminal model. In an attempt to directly observe the effect of the CF₃ group in the penultimate unit on the radical reactivity, we employed the Giese's mercury method. 4,4,4‐Trifluorobutyl and n‐butyl radicals produced from respective alkylmercuric chlorides were competitively reacted with t‐butyl 2‐trifluoromethylacrylate (TBTFMA) and t‐butyl methacrylate (TBMA) and the products analyzed with gas chromatography. While TBTFMA has been found to be about 24times more reactive than TBMA toward the n‐butyl radical, the former is about 12 times more reactive than the latter toward the 4,4,4‐trifluorobutyl radical. Thus, the reactivity of the propagating radical toward TBTFMA in comparison with TBMA is suppressed by a factor of two when the penultimate unit has the CF₃ group. We observed a sextet electron spin resonance of the TFMA propagating radical with a coupling constant of ca. 25 gauss between the β‐proton and β‐fluorine. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1559–1565, 2008     

The mechanism of propagation in free‐radical copolymerization

A brief overview of free‐radical copolymerization kinetics is presented. Recent developments have highlighted the shortcomings of the terminal (or Mayo–Lewis) model. However, for many practical reasons, approximate models are useful for assisting our understanding of any given copolymerization reaction and allowing comparisons with the vast database on copolymerization reactions. Terminal model reactivity ratios have limited meaning, so it may be imprudent to use these values as a quantitative measurement of radical reactivity. Presently, experimental limitations restrict the amount of information that can be obtained by models being fitted to composition or propagation rate data; therefore, the direct measurement of radical reactivity is required together with high‐level quantum calculations. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 597–603, 2001     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

The effects of abstractable hydrogen in radical photopolymerization of maleate/vinyl ether monomers studied with EPR and photo‐RTIR

In this contribution, the influence of abstractable hydrogen on the kinetics of photopolymerized vinyl ether/maleate monomer formulations is reported. The effects of chain transfer on the polymerization rate were studied with photo real‐time Infra Red (IR) for formulations composed of equimolar amounts of diethyl maleate (DEMA) and three different vinyl ethers; methyl hexyl vinyl ether where the abstractable hydrogens adjacent to the vinyl functionality have been replaced with methyl groups, ethyl hexyl vinyl ether (EHVE) which has two easily abstractable α‐hydrogens and triethylene glycol methyl vinyl ether (TEGMVE), which has several abstractable hydrogens. Four conclusions are drawn from these studies: (i) the vinyl ether/maleate kinetics differs significantly from the classical expression R_p = KI^0.5, with recorded exponential factors of 0.84 ± 0.04 in the absence of easily abstractable hydrogens; (ii) the presence of abstractable hydrogens significantly changes the kinetics of vinyl ether/maleate polymerizations with recorded exponential factors of 0.55 ± 0.04 for EHVE/DEMA and 0.70 ± 0.04 for TEGMVE/DEMA; (iii) the presence of easily abstractable hydrogens leads to a preferential consumption of maleates; and (iv) electron paramagnetic resonance studies show that vinyloxy‐like radicals constitute the majority of the radicals in the systems with easily abstractable hydrogens. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2810–2816, 2010     

Kinetic and ESR studies on radical polymerization behavior of N‐(2‐phenylethoxycarbonyl)methacrylamide

Polymerization of N‐(2‐phenylethoxycarbonyl)methacrylamide (PECMA) with dimethyl 2,2′‐azobisisobutyrate (MAIB) was investigated in tetrahydrofuran (THF) kinetically and by means of electron spin resonance (ESR). The overall activation energy of the polymerization was calculated to be 58 kJ/mol. The initial polymerization rate (R_p) is expressed by R_p = k[MAIB]^0.3[PECMA]^2.3 at 60 °C. Such unusual kinetics may be ascribable to primary radical termination and to acceleration of propagation due to monomer association. Propagating poly(PECMA) radical was observed as a 13‐line spectrum by ESR under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p, 4.7–10.5 L/mol s) and termination (k_t, 4.6 × 10⁴ L/ml s) at 60 °C are much lower than those of methacrylamide and methacrylate esters. The Arrhenius plots of k_p and k_t gave activation energies of propagation (24 kJ/mol) and termination (25 kJ/mol). The copolymerizations of PECMA with styrene (St) and acrylonitrile were examined at 60 °C in THF. Copolymerization parameters obtained for the PECMA (M₁) − St(M₂) system are as follows: r₁ = 0.58, r₂ = 0.60, Q₁ = 0.73, and e₁ = +0.22. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4264–4271, 2000     

Soluble hyperbranched polymer through initiator-fragment incorporation radical copolymerization of ethylene glycol dimethacrylate and α-ethyl β-N-(α-methylbenzyl) itaconamate in benzene

The copolymerizations of ethylene glycol dimethacrylate (EGDM) with α-ethyl β-N-(α^′-methylbenzyl) itaconamates (RS- and S-EMBIs) derived from (RS)- and (S)-α-methylbenzylamines were conducted at 70 and 80 °C in benzene using dimethyl 2,2^′-azobisisobutyrate (MAIB) of high concentration as initiator. The copolymerization of EGBM (0.20 mol/l) and RS-EMBI (0.50 mol/l) with MAIB (0.50 mol/l) proceeded homogeneously without any gelation in benzene to give benzene-soluble copolymer in a yield of 55% based on the total weight of EGDM, RS-EMBI and MAIB. The copolymer was soluble in acetone, ethyl acetate, chloroform, tetrahydrofuran (THF), toluene, N,N-dimethylformamide and insoluble in n-hexane, methanol, dimethyl sulfoxide, and water. The copolymerization system involved ESR-observable propagating radicals derived from EGDM and RS-EMBI, of which the total concentration increased with time in spite of the homogeneous system. The copolymer consisted of EGDM unit (25 mol%), RS-EMBI unit (45 mol%), and methoxycarbonylpropyl group as MAIB-fragment (30 mol%). Such a large number of initiator fragments were incorporated into the copolymer as terminal groups through initiation and primary radical termination, leading to a conclusion that the copolymer was of hyperbranched structure (initiator-fragment incorporation radical copolymerization). Radius of gyration (R_g) and M_w of the copolymer by light scattering measurements in THF were 17.8 nm and 7.7 × 10⁵, respectively. Comparison of these values with those (R_g=27.6 nm and M_w=2.9×10⁵) of linear polystyrene also supported the above conclusion. Reflecting the compact hyperbranched structure, the intrinsic viscosity ([η]) of the copolymer was very low, [η]=0.075 dl/g at 25 °C in THF. The individual copolymer molecules were observed as a nanoparticle by TEM. The copolymerization of EGDM and S-EMBI with MAIB in benzene also gave similar results.     

Simulation and analysis of free radical branching copolymerization kinetics

Iｔｉｓｄｉｆｆｉｃｕｌｔａｎｄｅｖｅｎｉｍｐｏｓｓｉｂｌｅｔｏｄｅｔｅｒｍｉｎｅｂｙｒｅｇｕｌａｒｋｉｎｅｔｉｃｓｍｅｔｈｏｄｓｓｏｍｅｋｉｎｅｔｉｃｓｐａｒａｍｅｔｅｒｓｏｆｓｏｍｅｃｏｍｐｌｅｘｃｈｅｍｉｃａｌｒｅａｃｔｉｏｎｓ,ｅｓｐｅｃｉａｌｌｙｐｏｌｙｍｅｒｉｚａｔｉｏｎｒｅａｃｔｉｏｎｓｗｈｏｓｅｍｅｃｈａｎｉｓｍｓｈａｖｅｎｏｔｂｅｅｎｋｎｏｗｎ.Ｗｅｈａｖｅｔｒｉｅｄｔｏｓｏｌｖｅｔｈｉｓｐｒｏｂｌｅｍｂｙｔｈｅｍｅｔｈｏｄｏｆｒｅｇｒｅｓｓｉｏｎａｎｄｓｉｍｕｌａｔｉｏｎｏｆｃ…     

Effect of the substituents on radical copolymerization of dialkyl fumarates with some vinyl monomers

Radical copolymerization of dialkyl fumarates (DRF) with various vinyl monomers was carried out in benzene at 60°C. The monomer reactivity ratios, r₁ and r₂, were determined from the comonomer-copolymer composition curves. The relative reactivity of DRFs with various ester substituents toward a polystyryl radical was revealed to depend on both steric and polar effects of the ester groups. It has also been clarified that α-substituents of the polymer radical have a significant role in addition of DRF, from the comparison of the monomer reactivity ratios determined in copolymerizations with monosubstituted and 1,1-disubstituted ethylenes. The absolute cross-propagation rate constants were also evaluated and discussed. © 1992 John Wiley & Sons, Inc.     

Kinetics of radical copolymerization of [1‐(fluoromethyl)vinyl]benzene with chlorotrifluoroethylene

The synthesis of [1‐(fluoromethyl)vinyl]benzene (or α‐(fluoromethyl)styrene, FMB) and its radical copolymerization with chlorotrifluorethylene (CTFE), initiated by tert‐butyl peroxypivalate (TBPPi) are presented. The allyl monomer [H₂C = C(CH₂F)C₆H₅] was obtained by electrophilic fluorodesilylation of trimethyl(2‐phenylprop‐2‐en‐1‐yl)silane in 93% yield. A series of seven copolymerization reactions were carried out starting from initial [CTFE]₀/([FMB]₀ + [CTFE]₀) molar ratios ranging from 19.6 to 90.0 mol %. The molar compositions of the obtained poly(CTFE‐co‐FMB) copolymers were assessed by means of ¹⁹F nuclear magnetic resonance spectroscopy. Statistic copolymers were produced with molar masses ranging between 13,800 and 25,600 g/mol. From the Kelen and Tudos method, the kinetics of the copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_CTFE = 0.4 ± 0.2 and r_FMB = 3.7 ± 1.8 at 74 °C) showing that FMB is more reactive than CTFE as well as other halogenated or nonhalogenated monomers involved in the radical copolymerization with CTFE. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3843–3850, 2007     

Radical polymerization of isopropyl tert-butyl fumarate and maleate,and characterization of the resulting polymers

Radical polymerization of isopropyl tert-butyl fumarate (iPtBF) and monomer-isomerization radical polymerization of isopropyl tert-butyl maleate (iPtBM) were investigated with 2,2′-azobisisobutyronitrile as initiator in the presence and absence of morpholine (Mor) as isomerization catalyst. It was found that iPtBF gave high molecular weight polymers in high yield as previously observed for diisopropyl fumarate (DiPF) and di-tert-butyl fumarate (DtBF). It was confirmed that iPtBF produced by in situ monomer isomerization of iPtBM homopolymerized to give a polymer. Radical copolymerization of iPtBM with styrene in the presence and absence of Mor was also performed and monomer reactivity ratios obtained were compared. From the kinetic study of the isomerization of iPtBM, it was revealed that the isomerization rate showed first-order dependence on the concentration of iPtBM and Mor, and that the apparent activation energy was 29.4 kJ/mol. On pyrolysis of the poly(iPtBF) at 180°C, isobutene and isopropanol were eliminated rapidly to yield polymer containing carboxyl groups and anhydrides. The pyrolytic behavior was different from that of a copolymer of DiPF with DtBF.     

Tricarbonylchromium complexes of styrenes in radical copolymerization

The organometallic monomers styrenetricarbonylchromium and p‐methylstyrenetricarbonylchromium were copolymerized in ethyl acetate solutions with methyl methacrylate and butyl acrylate using azobisisobutyronitrile at 50 °C and a binary system including di‐tert‐butylperoxytriphenylantimony at 30 °C as the free‐radical initiators. Comonomers are proposed to form a molecular complex based on the results of ultraviolet and electron spin resonance spectroscopy. A kinetic study shows that chromium‐containing monomers at high concentrations in the mixture reduce the rate of copolymerization. The addition of styrenetricarbonylchromium to butyl acrylate significantly slows down the autoacceleration. The reactivity ratios of the comonomer pairs, namely, styrenetricarbonylchromium–methyl methacrylate, styrenetricarbonylchromium–butyl acrylate and p‐methylstyrenetricarbonylchromium–methyl methacrylate, were determined using the method of Kelen–Tudos for low conversion polymerizations.Copyright © 2001 John Wiley & Sons, Ltd.     

Penultimate unit effects in the free‐radical copolymerization of styrene with acrylonitrile according to theoretical thermochemistry

Penultimate unit effects in the free‐radical copolymerization of styrene with acrylonitrile were investigated by the consideration of the theoretical thermochemistry of three subsequent propagation steps in the copolymerization process at 298 K and the electronic properties of the relevant reactants. The total energies, zero‐point energies incorporating a 0.96 scale factor, and thermal enthalpy corrections for all optimized structures were computed with the B3LYP density functional theory and the 6‐311G(d,p) basis set. The penultimate unit effect on the enthalpy of reaction for elementary propagation reactions ranged from ?1.2 to 2.7 kcal/mol. The enthalpies of elementary copolymerization propagation reactions showed that penultimate unit effects depended not only on the γ substituent itself but also on the terminal unit of the growing radical and the monomer being attached. The exothermicity of the addition of radicals, varying in the penultimate unit for a given monomer, was lower for more polar radicals and smaller Mulliken charges at the radical atom, except for radicals with a CN substituent placed in the γ position when they reacted with acrylonitrile. For the latter system, the repulsive interactions between the CN substituent and nitrile group of the monomer being added contributed to the reaction enthalpy. Almost no penultimate unit effect was detected upon spin distribution at the radical atom, and this probably indicated the absence of the independent implicit penultimate model. The results obtained strengthen the concept of the inseparability of implicit and explicit penultimate unit effects in radical copolymerization. However, it appears that for the styrene–acrylonitrile copolymerization system, the explicit penultimate model prevails over the implicit penultimate model. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3592–3603, 2002     

Further evidence for the inseparability of the theoretical enthalpic terminal and penultimate unit effects in the radical copolymerization of styrene with acrylonitrile

The theoretical enthalpies of propagation reactions at 0 K without zero‐point vibrational energy corrections according to terminal and penultimate models of the radical copolymerization of styrene with acrylonitrile are reported from molecular orbital calculations at the following levels of theory and basis sets: HF/6‐31G(d); B3‐LYP/6‐31G(d); B3‐LYP/6‐311G(d,p) and B3‐LYP/6‐311+G(3df)//6‐311G(d,p). Both the enthalpic terminal and penultimate unit effects, determined according to the theoretical thermochemistry, depend on the level of theory and basis set used for the molecular orbital calculations. The best performing B3LYP/6‐311+G(3df)//B3LYP/6‐311G(d,p) procedure gives theoretical enthalpies for the addition of styrene and acrylonitrile to CH that differ from experimental values by 0.6 and 1.6 kcal mol^?1, respectively. An analysis of the results obtained here leads to the conclusion that at least for the styrene–acrylonitrile monomer system, that is, a monomer system known as one of the few systems that do not conform to terminal model composition and microstructure equations, the enthalpic terminal unit effects seem to depend on the penultimate units of the growing radical. This finding, together with the outcome from our previous work on the dependence of the penultimate effects on the terminal units in a growing macroradical, indicates the inseparability of the enthalpic terminal (implicit) and explicit penultimate unit effects on the radical copolymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1778–1787, 2003     

ESR spectra of trifluoromethyl radical formed during the solid-phase photodecomposition of long-lived perfluoro-2,4-dimethyl-3-ethylpentyl-3 radicals

The products of photolysis of the long-lived radical [(CF₃)₂CF]₂C^·C₂F₅ at 77 K were studied by ESR. The mechanism of photodecomposition to form ^·CF₃ radicals was proposed. The ESR spectra of the trifluoromethyl radicals stabilized at 77 K in a glassy hexafluoropropylene trimer matrix were simulated, and the parameters À = 25.15 mT, À = 9.1 mT, and g = l.9996, g = 2.0056 were determined.     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

C~6~0与偶氮二异丁腈基自由基反应的ESR研究

C~6~0与偶氮二异丁基腈热分解产生的游离基(CH~3)~2CCN发生加成反应, 产物的红外光谱出现C~6~0和CN, CH的特征振动峰, ESR谱出现一对弱的肩峰, 中间的主峰容易功率饱和, 表明有两类物种存在, 提出了可能的反应机理。     

Kinetic investigations on the photopolymerization of di- and tetrafunctional (meth)acrylic monomers in polymeric matrices. ESR and calorimetric studies. I. Reactions under irradiation

The photopolymerization of several di- and tetrafunctional (meth)acrylic monomers in the presence of a styrene–butadiene–styrene polymeric matrix (SBS) has been studied. Electron spin resonance spectroscopy (ESR) and differential scanning photocalorimetry (photo-DSC) were used as monitoring techniques to identify the photogenerated radicals and analyze photopolymerization profiles, radical environments, and radical secondary reactions. The study of the photopolymerization and/or photocrosslinking reactions of these monomers in the solid media was carried out by taking into consideration different factors, such as the influence of both monomer and photoinitiator structures on the hydrogen abstraction in the binder with formation of benzylic and allylic radicals, the polymerization of the monomers itself and the hydrogen abstraction reaction in the polymerized acrylic chains. Finally, irradiation of the system SBS/photoinitiator in the absence of monomer was also accomplished. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2775–2783, 1998