Synthesis of aromatic polyesters and polyamides by alternating copolymerizations of 1,4-dicarbonyl-1,4-dihydronaphthalene with bezoquinones and benzoquinone diimines

1,4-Dicarbonyl-1,4-dihydronaphthalene ( 1 ) was synthesized by the dehydrochlorination reaction of 1,4-dihydronaphthalene-1,4-dicarbonyl chloride with triethylamine and obtained as its very dilute solution, but it easily polymerized in the concentration as high as 0.1 mol/L to give its polymer. 1 generated in situ by the dehydrochlorination reaction of 1,4-dihydronaphthalene-1,4-dicarbonyl chloride in a deoxygenated toluene polymerized alternatingly with benzoquinones such as 2-dodecylthio-p-benzoquinone, 2,5-di(tert-butyl)-p-benzoquinone, p-benzoquinone, and 2,3-dichloro-5,6-dicyano-p-benzoquinone, and with benzoquinone diimines such as N,N′-diethoxycarbonyl-p-benzoquinone diimine, N,N′-dibenzoyl-p-benzoquinone diimine, and N,N′-diphenyl-p-benzoquinone diimine to give aromatic polyesters and polyamides, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1929–1936, 1998     

Synthesis and radical polymerization of a vinyl monomer having a sulfonylacylurea moiety and hydrolysis of the obtained polymer

The radical polymerization of N-acryloyl-N′-(p-tolylsulfonyl)urea ( 2 ), prepared easily by the reaction of p-toluenesulfonyl isocyanate with acrylamide, was carried out in DMF, DMSO, or NMP at 60°C by use of AIBN as an initiator to give a polymer 3 in a good yield. Copolymerization parameters of 2 were evaluated by the copolymerization with MMA. Polymer 3 was readily hydrolyzed in an aqueous NaOH solution (1M) at room temperature to give poly(acrylic acid). The reason for the higher activity for hydrolysis of 3 compared to an ordinary amide is discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1515–1519, 1998     

Synthesis and properties of new soluble N-phenyl–substituted aromatic-aliphatic and all aromatic polyamides derived from 4,4′-dianilinobiphenyl

New N-phenylated aromatic-aliphatic and all aromatic polyamides were prepared by the high-temperature solution polycondensation of 4,4′-dianilinobiphenyl with both aliphatic (methylene chain lengths of 6–11) and aromatic dicarboxylic acid chlorides. All of the aromatic-aliphatic polyamides and the wholly aromatic polyamides exhibited an amorphous nature and good solubility in amide-type and chlorinated hydrocarbon solvents, except for those aromatic polyamides containing p-oriented phenylene or biphenylylene linkages in the backbone; the latter were crystalline and insoluble in organic solvents except m-cresol. The N-phenylated aromatic-aliphatic polyamides and aromatic polyamides had glass transition temperatures in the range of 79–116°C and 207–255°C, respectively, and all the polymers were thermally stable with decomposition temperatures above 400°C in air. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2193–2200, 1998     

Synthesis and characterization of new soluble aromatic polyimides from diaminotetraphenylimidazolinone and aromatic tetracarboxylic dianhydrides

A series of new soluble aromatic polyimides with inherent viscosities of 0.65–1.12 dL/g were synthesized from 1,3-bis(4-aminophenyl)-4,5-diphenylimidazolin-2-one and various aromatic tetracarboxylic dianhydrides by the conventional two-step procedure that included ring-opening polyaddition and subsequent thermal cyclodehydration. These polyimides could also be prepared by the one-pot procedure in homogeneous m-cresol solution. Most of the tetraphenyl-pendant polyimides were soluble in organic solvents such as N,N-dimethylacetamide, 1,3-dimethyl-2-imidazolidone, and m-cresol. Some polyimides gave transparent, flexible, and tough films with good tensile properties. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyimides were in the range of 287–326 and 520–580°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1767–1772, 1998     

A new oxidation state of aniline pentamer observed in water‐soluble electroactive oligoaniline‐chitosan polymer

A novel water‐soluble electroactive polymer, aniline pentamer crosslinked chitosan (Pentamer‐c‐Chi), was prepared by condensation polymerization of the terminal carboxyl groups in aniline pentamer with the amino side groups in chitosan in aqueous solution. The carboxyl groups were activated by N‐hydroxysuccinimide (NHS) and N,N′‐dicyclohexylcarbodiimide (DCC). The electrochemical behavior of anilinepentamer in this kind of crosslinked polymer was studied in acidic aqueous solution by means of cyclic voltammetry (CV), UV–vis, and electron spin resonance (ESR) spectroscopy. There were three reversible redox peaks in the CV of Pentamer‐c‐Chi. A new emeraldine oxidization state in the form of radical cations was proposed, which was associated with the new absorption band at 370 nm in the UV–vis spectra. The ESR of the aqueous solution of Pentamer‐c‐Chi showed a single Lorentzian shaped signal, which suggested the existence of radical cations. The new redox state was pH dependent and appeared only at pH < 3. The stability of radical cations could be attributed to the hydrogen bonds between radical cations, water, and chitosan. Morphological structure of the Pentamer‐c‐Chi can be adjusted by varying the content of aniline pentamer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1124–1135, 2008     

Synthesis and surface characterization of heparin-immobilized polyetherurethanes

Novel poly(ether urethanes) containing diester groups in the side chains (PU) were synthesized from 4,4′-diphenylmethyl diisocyanate, polytetramethylene glycol, and diethyl bis(hydroxymethyl)malonate as a chain extender. The surface modification of the PU film was carried out by a hydrolysis reaction, poly(ethylene oxide) (PEO) grafting, and heparin immobilization, and the surface-modified PUs were then characterized by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, electron spectroscopy for chemical analysis (ESCA), and a contact angle goniometer. The concentration of carboxylic acid groups introduced on the PU surfaces as determined by the rhodamine interaction method was 61 nmol/cm² when treated with 4N NaOH/methanol (1 : 2 v/v) for 30 min and subsequently with a citric acid–methanolic aqueous solution. The amounts of heparin coupled to the carboxyl groups on the PU surfaces and to the terminus amino groups on the PU-PEO were 0.92 and 0.84 μ g/cm², respectively. There was almost no heparin released from the immobilized surface of a physiological solution for 100 h, thereby indicating the strong stability of immobilized heparin. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2331–2338, 1998     

Synthesis and functionalities of poly(N-vinylalkylamide). V. Control of a lower critical solution temperature of poly(N-vinylalkylamide)

N-vinyl-n-butyramide (NVBA), N-vinylisovaleramide (NVIVA), and N-vinyl-n-valeramide (NVVA), which are N-vinylalkylamides with different alkyl groups were synthesized and their solution behavior in a polymeric form was examined. Copolymers of N-vinylisobutyramide (NVIBA) with N-vinylacetamide (NVA), NVIBA with NVVA, and NVVA with NVA were prepared by the solution polymerization to control the LCSTs. The resultant polyNVBA showed a lower critical solution temperature (LCST) sharply at 32°C, but polyN-vinylisovaleramide (polyNVIVA) and polyN-vinyl-n-valeramide(polyNVVA) that have n-butyl and isobutyl groups, respectively, on their side chains were insoluble even in cold water. The water solubility of the resulting polymers was found to vary, depending on the molecular shapes as well as the side chain length of the alkyl groups in question. The copolymers consisting of NVVA, NVIBA, and NVA in water showed LCSTs sharply between 10 and 90°C, depending on changes in their comonomer content. It was found that the changes in LCST that are caused by the incorporation of comonomers are due to changes in the overall hydrophilicity of the polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3087–3094, 1997     

Anionic synthesis of aromatic amide and carboxyl functionalized polymers. Chain-end functionalization of poly(styryl)lithium with N,N-diisopropyl-4-(1-phenylethenyl)benzamide

The novel syntheses of N,N-diisopropyl-4-benzoylbenzamide, N,N-diisopropyl-4-(1-hydroxy-1-phenylethyl)benzamide, and N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) are described. ω-Amidopolystyrene ( 2 ) was synthesized in quantitative yields by the reaction of poly(styryl)lithium with stoichiometric amounts of N,N-diisopropyl-4-(1-phenylethenyl)benzamide ( 1 ) in toluene/tetrahydrofuran (4 : 1 v/v) at −78°C. Deblocking of the amide protecting group by acid hydrolysis quantitatively provides the corresponding aromatic carboxyl chain-end functionalized polystyrene ( 3 ). The functionalization agent and functionalized polymers were characterized by HPLC, thin-layer chromatography, size exclusion chromatography, vapor phase osmometry, spectroscopy (¹H-NMR, ¹³C-NMR, and FTIR), potentiometry, and elemental analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1233–1241, 1998     

Helix formation of poly(phenylacetylene) derivatives bearing amino groups at the meta position induced by optically active carboxylic acids

Two novel phenylacetylene derivatives bearing diethylaminomethyl groups at the meta position on phenyl groups [3‐(N,N‐diethylaminomethyl)phenyl]acetylene ( 1 ) and [3,5‐bis(N,N‐diethylaminomethyl)phenyl]acetylene ( 2 ) were synthesized and polymerized with [Rh(nbd)Cl]₂ (nbd: norbornadiene). Both monomers gave highly cis–transoidal stereoregular polymers that exhibited an induced circular dichroism (ICD) in the UV–visible region, probably because of a prevailing one‐handed helical conformation upon complexation with optically active carboxylic acids such as mandelic acid and lactic acid. The sign of the Cotton effects reflected the absolute configuration of the chiral acids. Therefore, these polymers can be used as a novel probe for determining the configuration of chiral acids. The polymers were stable in the presence of chiral acids in solution. The poly‐ 1 complexed with chiral acids exhibited a split‐type ICD, whereas the poly‐ 2 complexed with chiral acids showed a different, non‐split‐type ICD. The ICD pattern of the poly‐ 1 /chiral acids complexes dramatically changed with an increase in the concentration of the chiral acids, thus showing a non‐split‐type ICD similar to those of the poly‐ 2 /chiral acid complexes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3180–3189, 2001     

Temperature-induced phase transition of poly(N,N-dimethylaminoethyl methacrylate-co-acrylamide)

Copolymers of N,N-dimethylaminoethyl methacrylate (DMAEMA) and acrylamide (AAm) were prepared to demonstrate a temperature-induced phase transition. Poly DMAEMA has a lower critical solution temperature (LCST) around 50°C in water. With copolymerization of DMAEMA with AAm, the LCST shifts to the lower temperature was observed, probably due to the formation of hydrogen bonds between amide and N,N-dimethylamino groups. FT-IR studies clearly show the formation of hydrogen bonds which protect N,N-dimethylamino groups from exposure to water and result in a hydrophobic contribution to the LCST. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 595–598, 1997     

Synthesis and characterization of new soluble polyesters derived from various cardo bisphenols by solution polycondensation

A series of new polyesters was prepared from terephthaloyl (or isophthaloyl) chloride acid with various cardo bisphenols on solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.49 dL · g⁻¹. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, and o‐chlorophenol. The polyesters containing cardo groups including diphenylmethylene, tricyclo[5.2.1.0^2,6]decyl, tert‐butylcyclohexyl, phenylcyclohexyl, and cyclododecyl groups exhibited better solubility than bisphenol A–based polyesters. These polymers showed glass transition temperatures (T_g's) between 185 °C and 243 °C and decomposition temperatures at 10% weight loss ranging from 406 °C to 472 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4451–4456, 2000     

Synthesis,characterization, and hydrolysis of PVAc-PS-PVAc via charge transfer polymerization

An ABA triblock copolymer of polyvinyl acetate-b-polystyrene-b-polyvinyl acetate (PVAc-PS-PVAc) was successfully synthesized with a binary system composed of polystyrene with N,N-dimethylaniline end groups (PS_da) and benzophenone to initiate the polymerization of vinyl acetate under UV irradiation. The PS_da was obtained by capping the living polystyrene macrodianion with p-(dimethylamino) benzaldehyde in excess. The PVA-PS-PVA could then be obtained by hydrolysis of PVAc-PS-PVAc in the sodium ethoxide benzene solution. The intermediates and desirable copolymers were characterized by GPC, IR, and ¹H-NMR in detail. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2595–2600, 1999     

Temperature‐sensitive hydrogel microspheres formed by liquid–liquid phase transitions of aqueous solutions of poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate)

Poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate) (DMA‐co‐AMA) copolymers were prepared by the copolymerization of N,N‐dimethylacrylamide with allyl methacrylate (AMA). The methacryloyl group of AMA reacted preferentially, and this resulted in pendant allyl groups along the copolymer chains. Aqueous solutions of these DMA‐co‐AMA copolymers were thermoresponsive and showed liquid–liquid phase transitions at temperatures that depended on the AMA content. Hydrogel microspheres were prepared from these thermally phase‐separated liquid microdroplets by the free‐radical crosslinking of the pendant allyl groups. The morphologies of the resulting thermoresponsive microspheres as a function of the reaction temperature and the amount of the initiator were examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1641–1648, 2005     

Controlled grafting of ethyl cellulose with azobenzene‐containing polymethacrylates via atom transfer radical polymerization

Graft copolymers of ethyl cellulose with azobenzene‐containing polymethacrylates were synthesized through atom transfer radical polymerization (ATRP). The residual hydroxyl groups on ethyl cellulose were first esterified with 2‐bromoisobutyryl bromide to yield 2‐bromoisobutyryloxy groups, which was then used to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) in the presence of CuBr/N,N,N′,N″,N″‐pentamethylenetriamine (PMDETA) as catalyst and anisole as solvent. The graft copolymers were characterized by gel permeation chromatography (GPC) and ¹H‐NMR. The molecular weights of the graft copolymers increased relatively to the macroinitiator, and the polydispersities were narrow. The thermal and liquid crystalline property of the graft copolymers were investigated by differential scanning calorimeter (DSC) and polarizing optical microscope (POM). Photoresponsive property was studied under the irradiation of UV–vis light in THF solution. The graft copolymers have potential applications, including sensors and optical materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1653–1660, 2007     

Synthesis of polymer particles possessing radical initiating sites on the surface by emulsion copolymerization and construction of core–shell structures by a photoinduced atom transfer radical polymerization approach

The crosslinked polystyrene particles possessing photofunctional N,N‐diethyldithiocarbamate groups on their surface were prepared by free‐radical emulsion copolymerization of a mixture of styrene, divinylbenzene and 4‐vinylbenzyl N,N‐diethyldithiocarbamate with redox system as an initiator under UV irradiation. In this copolymerization, the inimer 4‐vinylbenzyl N,N‐diethyldithiocarbamate acted the formation of hyperbranched structures by living radical photopolymerization. The particle sizes (number‐average particle diameter = 214–523 nm) were controlled by varying the feed amount of surfactant and size distributions were relatively narrow. Subsequently, core–shell particles were synthesized by photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by photofunctional polystyrene particles as a macroinitiator. Such core–shell particles were stabilized sterically by grafted chains in organic solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1771–1777, 2007     

Soluble alternating copolyimides containing the tetrahydro[5]helicene unit

A series of novel copolyimides have been synthesized from three commercially available dianhydrides and two diamine monomers containing the tetrahydro[5]helicene unit. Some of the copolyimides were soluble in common organic solvents such as 1,1,2,2-tetrachloroethane, N,N-dimethylacetamide, and N-methyl-2-pyrrolidinone. Molecular modeling was used to explain the enhanced solubility of the presented polyimides, based on structural features of the tetrahydro[5]helicene monomeric units. The onset temperatures for 5% weight loss for these polyimides, as assessed by thermogravimetry, were above 430°C in nitrogen. Inherent viscosities of the obtained polyimides were above 0.36 dL/g. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1349–1353, 1998     

Synthesis and properties of poly(amide-imide)s based on the diimide-diacid condensed from 2,2′- bis(4-aminophenoxy)biphenyl and trimellitic anhydride

A new dicarboxylic acid having a kinked structure was synthesized from the condensation of 2,2′-bis(4-aminophenoxy)biphenyl and trimellitic anhydride. A series of biphenyl-2,2′-diyl-containing aromatic poly(amide-imide)s having inherent viscosities of 0.23–0.94 dL/g was prepared by the triphenyl phosphite activated polycondensation from the diimide-diacid II with various aromatic diamines in a medium consisting of N-methyl-2-pyrrolidone (NMP), pyridine, and calcium chloride. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents including NMP and N,N-dimethylacetamide (DMAc). Transparent, flexible, and tough films of these polymers could be cast from DMAc or NMP solutions. The glass transition temperatures of these polymers were in the range of 227–261°C and the 10% weight loss temperatures were above 520°C in nitrogen. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1169–1177, 1998     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010     

Syntheses and thermostabilities of N-[4-(N′-substituted aminocarbonyl)phenyl]maleimide polymers

Three types of novel N-[4-(N′-substituted aminocarbonyl)phenyl] maleimide (RPhMI: N-substituent (R) = phenyl, cyclohexyl, and cyclododecyl) were synthesized and homopolymerized under several conditions. In the copolymerizations of RPhMI (M₁) with styrene (ST; M₂) or methyl methacrylate (MMA; M₂), monomer reactivity ratios and Alfrey-Price Q, e values were determined. All homopolymers decomposed without softening and melting points. The initial degradation temperatures (T_d) of poly(RPhMI)s were over 320°C. The glass transition temperatures (T_g) of RPhMI copolymers were much higher than those of N-phenylmaleimide (PhMI)–ST, PhMI–MMA, N-cyclohexylmaleimide (CHMI)–ST, and CHMI–MMA copolymers. Thermal stability of the terpolymers of RPhMI with ST and acrylonitrile (AN) was higher than that of ST–AN copolymers, i.e., AS resin. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2001–2012, 1998     

Reactions on polymers with amine groups. V. Addition of pyridine and imidazole groups with acetylenecarboxylic acids

Unsaturated macromolecular carboxybetaines were obtained by reaction of poly(4-vinylpyridine) and poly(N-vinylimidazole) with propiolic acid. A kinetic model was presented for 4-methylpyridine. It consists of three coupled reactions: neutralization, addition which involves two molecules of acid and leads to a cation–anion pair structure, where the cation results from the addition of the amine nitrogen to the triple bond of acid, and an equilibrium reaction between the ion-pair structure and the betaine structure. The addition rate was found to be higher for poly(4-vinylpyridine) than for poly(N-vinylimidazole); it was also higher in water than in a water–methanol mixture. The reaction with acetylenedicarboxylic acid was carried out on poly(N-vinylimidazole), but the transformed units showed the structure that results from propiolic acid. The betaine products from 4-methylpyridine did not polymerize by radical initiation. The polymeric products show characteristics of photocrosslinking polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1615–1623, 1998