Semi-rigid thermotropic liquid-crystalline copolycarbonates comprising main-chain hexafluoropentane segments

Novel semi-rigid fluorocarbon-containing coplycarbonates composed of biphenyl moiety and rigid rod-like hexafluoropentane chain were prepared by melt polycondensation of 6,6′-(biphenyl-4,4′-diyldioxy)dihexanol ( 1 ) and 2,2,3,3,4,4-hexafluoro-1,5-pentanediol ( 2 ) with alkylene diphenyl dicarbonates 3 of various aliphatic lengths (m = 6, 8, 10 and 12). The structures of the copolymers 4 were confirmed by FT-IR, ¹H and ¹³C NMR spectra and elemental analyses. The thermal and liquid-crystalline (LC) properties were examined by differential scanning calorimetry (DSC), polarizing microscopy and temperature-changeable X-ray analyses. These measurements indicated that the copolymers show well-defined thermotropic nematic textures and have block-like sequences. It is suggested that the introduction of the hexafluoropentane chain into the main chain gives more stable LC phases.     

Synthesis and characterization of side-chain liquid-crystalline poly(ether ester)s having p-substituted biphenyl mesogenic side groups

Several novel mesogenic spiro-orthoester monomers such as 1,6,10-trioxaspiro[4,5]decanes 4 , containing biphenyl mesogens at the C-8 positions of the five- and six-membered spirocyclic ring, through the alkylene spacers of different lengths were prepared by condensation reaction of the corresponding biphenyl mesogenic 1,3-propanediol 3 with 2,2-diethoxytetrahydrofuran, with 50–75% yields. Through cationic double ring-opening polymerization, carried out with boron trifluoride etherate as an initiator (5 mol % vs. monomer) in bulk at 150°C, spiro-orthoester monomers 4 afforded a novel class of side-chain thermotropic LC polymers with a poly(ether ester) as the main chain 8 . The liquid-crystalline properties of the spiro-orthoester monomers and the resulting polymers were examined by differential scanning calorimetry and optical polarized microscopy. Biphase separation was observed in the side-chain liquid-crystalline poly(ether ester)s upon annealing in the broad isotropic region. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2439–2455, 1998     

Synthesis of new aromatic polyimides with various side chains containing a biphenyl mesogen unit and their abilities to control liquid-crystal alignments on the rubbed surface

New poly(m-phenylene 4,4′-oxydiphthalimide)s containing various side chains, such as 6-(4-biphenylmethoxy)hexyloxy group and 6-(phenylphenoxy)hexyloxy isomers, were synthesized, giving thin films of a high quality. All the polyimides apparently were almost amorphous, but exhibited short-range ordering in some extent, depending on the side chains. By incorporating side chains, the thermal properties, including stability, thermal expansivity, and glass transition temperature, were generally degraded, whereas the optical and dielectric properties were improved. All the polyimides exhibited a good rubbing processability and excellent performance in the controlling of both the alignment and the pretilt of LC molecules in the LC cell. The pretilt angle of LC molecules was easily achieved in a wide-angle range of 8–27°, depending upon the rubbing density as well as the incorporated side chains. The pretilting of LC molecules was very sensitive to all the molecular parameters (namely, the flexibility of polymer chain backbone as well as the isomeric structure of biphenyl mesogen end group, spacer length, and spacer conformation in the side chain) in the polyimide, in addition to the rubbing process. In particular, the side chains, which are much shorter in length than the long alkyl side chains in the polyimides being used widely as LC alignment layers, were evident to involve effectively in the alignment of and the pretilt of LC molecules, which are highly desired in the LC display industry. This might mainly be attributed to a strong interaction between the biphenyl mesogen end group of the side chain and the LC molecule. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2909–2921, 1999     

Langmuir films of flexible polymers transferred to aqueous/liquid crystal interfaces induce uniform azimuthal alignment of the liquid crystal

We reported recently that amphiphilic polymers can be assembled at interfaces created between aqueous phases and thermotropic liquid crystals (LCs) in ways that: (i) couple the organization of the polymer to the order of the LC and (ii) respond to changes in the properties of aqueous phases that can be characterized as changes in the optical appearance of the LC. This investigation sought to characterize the behavior of aqueous–LC interfaces decorated with uniaxially compressed thin films of polymers transferred by Langmuir–Schaefer (LS) transfer. Here, we report physicochemical characterization of interfaces created between aqueous phases and the thermotropic LC 4-cyano-4′-pentylbiphenyl (5CB) decorated with Langmuir films of a novel amphiphilic polymer (polymer 1), synthesized by the addition of hydrophobic and hydrophilic side chains to poly(2-vinyl-4,4′-dimethylazlactone). Initial characterization of this system resulted in the unexpected observation of uniform azimuthal alignment of 5CB after LS transfer of the polymer films to aqueous–5CB interfaces. This paper describes characterization of Langmuir films of polymer 1 hosted at aqueous–5CB interfaces as well as the results of our investigations into the origins of the uniform ordering of the LC observed upon LS transfer. Our results, when combined, support the conclusion that uniform azimuthal alignment of 5CB is the result of long-range ordering of polymer chains in the Langmuir films (in a preferred direction orthogonal to the direction of compression) that is generated during uniaxial compression of the films prior to LS transfer. Although past studies of Langmuir films of polymers at aqueous–air interfaces have demonstrated that in-plane alignment of polymer backbones can be induced by uniaxial compression, these past reports have generally made use of polymers with rigid backbones. One important outcome of this current study is thus the observation of anisotropy and long-range order in Langmuir films of a novel flexible polymer. A second important outcome is the observation that the existence, extent, and dynamics of this order can be identified and characterized optically by transfer of the Langmuir film to a thin film of LC. Additional characterization of Langmuir films of two other flexible polymers [poly(methyl methacrylate) and poly(vinyl stearate)] using this method also resulted in uniform azimuthal alignment of 5CB, suggesting that the generation of long-range order in uniaxially compressed Langmuir films of polymers may also occur more generally over a broader range of polymers with flexible backbones.     

High-pressure synthesis and properties of aliphatic–aromatic polyimides via nylon-salt-type monomers derived from aliphatic diamines and benzophenonetetracarboxylic acid

Aliphatic polyimides (P-XBTA) having inherent viscosities of 0.4–1.4 dL/g were readily synthesized by the high-pressure polycondensation of the salt monomers, composed of aliphatic diamines having various methylene chain lengths (X = 4–12) and 3,3′,4,4′-benzophenonetetracarboxylic acid (BTA), under 200–250 MPa at 200–320°C. The salt monomers with odd-numbered methylene units were found to be more susceptible to crosslinking than those containing even-numbered methylene chains. The polyimides having even-numbered methylene units were highly crystalline, whereas those with odd-numbered methylene chains were crosslinked and therefore amorphous with only one exception, i.e., P-11BTA. The thermal behavior of these polymers was also studied. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 39–47, 1998     

Morphological studies of blends of conjugated polymers and acceptor molecules using langevin dynamics simulations

We use coarse‐grained Langevin dynamics simulations of blends of generic conjugated polymers and acceptor molecules to show how architecture (e.g., side chains, backbone flexibility of oligomers) and the pair‐wise interactions between the constituents of the blend affect morphology and phase transition. Alkyl side chains on the conjugated oligomer backbones shift the liquid crystal (LC) transition temperature from that of bare conjugated backbones and the direction of the shift depends on backbone–backbone interactions. Rigid backbones and constrained side chains cause a layer‐by‐layer morphology of conjugated polymers and amorphous acceptors, whereas flexible backbones and unconstrained side chains facilitate highly ordered acceptor arrangement. Strong backbone–backbone attraction shifts LC transition to higher temperatures than weak backbone–backbone attraction, and strong acceptor–acceptor attraction increases acceptor aggregation. Pure macro‐phase separated domains form when all pair‐wise interactions in the blend are strongly attractive, whereas interconnected domains form at intermediate acceptor–acceptor attraction and strong polymer–polymer attractions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004     

Synthesis and spinning of a thermotropic liquid crystal copolyester containing a semirigid cycloaliphatic spacer

A thermotropic, liquid crystalline copolyester, based on 2-chlorohydroquinone, 1,4-cyclohexanedimethanol and terephthaloyl chloride, has been synthesized and melt spun. The cyclohexanedimethylene moiety acts as a semirigid spacer, introducing flexibility while preserving the thermotropic nature of the polymer. Melt-spun fibers were observed to have a high degree of molecular alignment owing to the nematic nature of the melt. Both polymer and fiber properties have been characterized. Characterization techniques used to this end include elemental analysis, hot-stage polarized light microscopy, scanning electron microscopy, dilute solution viscometry, Fourier transform infrared spectroscopy, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1473–1480, 1998     

New fluorinated thermoplastic elastomers. I. The synthesis and thermal characteristics of α,ω‐dihydrosilane hybrid fluorinated polysiloxane precursors

The synthesis of new α,ω‐dihydrosilane hybrid fluorinated polysiloxanes is described via the polycondensation between a diallyl perfluorinated compound and tetramethyldisiloxane. Control over the size of the oligomers is possible when the reaction is performed in two steps. The length of the polysiloxane chains influences the glass‐transition temperature and the thermal stability of the fluorinated oligomers: the higher the length is, the higher the glass‐transition temperature and the thermal stability are. The synthesized compounds have been characterized with ¹H, ¹⁹F, and ²⁹Si NMR spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4485–4492, 2002     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of polyimides based on new fluorinated 3,3′-diaminobiphenyls

Two new fluorinated diamine monomers, 3,3′-diamino-5,5′-bis(trifluoromethyl)biphenyl and 3,3′-diamino-6,6′-bis(trifluoromethoxy)biphenyl, as well as a known nonfluorinated analog, 3,3′-diaminobiphenyl, were synthesized. Reaction of these diamines with rigid, highly rod-like dianhydrides produced poly(amic acid)s and polyimides, which were spin coated and thermally treated to produce polyimide films for evaluation in electronics applications. It was hoped that these polyimide films would exhibit an ideal combination of low thermal expansion, reduced water absorption, and low dielectric constant but with improved elongation due to the “crankshaft” nature of the 3,3′-biphenyl unit. Unlike polyimide films from analogous 4,4′-diaminobiphenyls, however, the 3,3′-diaminobiphenyl-based polyimides did not yield low in-plane thermal expansion coefficient in spin-coated films. In some cases high elongation was achieved, but with high thermal expansion. These new diamines may nevertheless find utility in polyimides and polyaramides for membrane, fiber, and other applications. Additionally, they may be useful in modifying the properties of polymer backbones via copolymerization. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2441–2451, 1997     

Influence of different linkage groups in biphenyl mesogenic core on phase behaviors of mesogen‐jacketed liquid crystalline polymers

The work focuses on the design, synthesis, and characterization of a series of mesogen‐jacketed liquid crystalline polymers (MJLCPs) based on the octyl substituted biphenyl mesogenic core through different linkage groups. The molecular characterizations of the polymers obtained by conventional free radical polymerization were performed with ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. Their thermotropic liquid crystalline (LC) behaviors were investigated in detail by a combination of various techniques, such as polarized light microscopy, differential scanning calorimetry, and 1D and 2D wide‐angle X‐ray diffraction. Our results showed that all the polymers were thermally stable, and their LC phases were greatly dependent on the linking groups between the biphenyl mesogenic core and terminal alkyl group substituent. Polymers with ether/ester or ether linkage group exhibited an unusual phase behavior with temperature increasing, tetragonal columnar nematic LC phase, or columnar nematic phase developed at high temperatures for the polymers transformed into amorphous phase during cooling process, showing a re‐entrant phase behaviors. However, polymers with ester linkage group were not LC with temperature varied. It is illustrated that subtle changes in the molecular structure brought about tremendous variation of the LC phase properties for MJLCPs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2545–2554     

Synthesis,liquid crystallinity,and mechanical properties of thermotropic polyquinolines

Thermotropic liquid-crystalline polyquinolines with high molecular weights, i.e., poly[2,2′-(α,ω-dioxyphenylene (or -dioxybiphenylene) alkane)-6,6′-(4,4′-dioxybiphenyl)-bis(4-phenylquinoline)]s (P-H-B1Mns or P-H-B2Mns), were synthesized by polycondensation of 4,4′-bis(4-amino-3-benzoylphenoxy)biphenyl and α,ω-bis(4-acetophenoxy (or -acetobiphenoxy))alkanes. For P-H-B1Mn series, the T_m and T_i were in the range of 129–230°C and 156–254°C, respectively, while for the P-H-B2Mn series, those were 182–275°C and 217–309°C, respectively. The introduction of both the dioxybiphenylene group and an alkylene spacer induced thermotropic liquid crystallinity in the polyquinoline, although the introduction of the alkylene spacer alone did not induce it. In addition, polyquinolines substituted with methyl, methoxy, and chloro groups exhibited larger mesophase temperature ranges as well as higher T_ms and T_is than the unsubstituted ones. Tensile strengths of these thermotropic polyquinolines were considerably high in the range of 770 to 1170 kgf/cm². © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 749–759, 1998     

Axial structures of biphenyl compounds linked by diethyl ether chains

Two simple biphenyl compounds, I and II, linked by diethyl ether chains have been synthesized. These biphenyl compounds are able to respectively rotate about an internal axis. From X-ray analyses, it was found that the 2,2′-linked biphenyl compound I can transmit the same axial chirality of the biphenyl backbones through the diethyl ether chains. On the other hand, in the 3,3′-linked biphenyl compound II, the opposite axial chirality of the biphenyl backbones is transmitted.     

The effect of crosslinking on thermal and mechanical properties of perfluorocyclobutane aromatic ether polymers

As the minimum features in semiconductor devices decrease, it is a new trend to incorporate copper and polymers with dielectric constant less than 3.0 to enhance the performance of the devices. Two fluorinated polymers, poly(biphenyl perfluorocyclobutyl ether) (BPFCB) and poly(1,1,1-triphenyl ethane perfluorocyclobutyl ether) (PFCB), are newly developed polymers with dielectric constants below 3.0. These two polymers have a similar backbone structure, but PFCB has the capability of crosslinking. To know the implications of these two polymers in the semiconductor industry, properties that are important for the integral reliability of Integral Circuits (IC), such as thermal and mechanical properties, should be understood. This comparative study shows that the crosslinking in perfluorocyclobutane aromatic ether polymer can reduce vertical thermal expansion and increase glass transition temperature (T_g) while water absorption, crystalline-like phase, and dielectric constant are slightly increased. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1383–1392, 1998     

Thermotropic liquid‐crystalline polymers containing five‐membered heterocyclic groups. X. Relationships between structures of semirigid polyesters based on three disubstituted 2,5‐diphenyl‐1,3,4‐thiadiazoles and thermotropic liquid‐crystalline and optical properties

Thermotropic liquid‐crystalline (LC) semirigid polyesters based on three terphenyl analogues of 1,3,4‐thiadiazole (2,5‐diphenyl‐1,3,4‐thiadiazole)s (DPTD) linking undecamethyleneoxy chain at different substituted positions were synthesized from three disubstituted (4,4′‐, 3,4′‐, and 3,3′‐) dioxydiundecanols of DPTD and four diesters, and the relationships between polymer structures and LC and optical properties were investigated. DSC measurements, texture observations, and wide‐angle X‐ray analyses revealed that the polymers composed of DPTD moiety having a more linear molecular structure and 1,4‐phenylene unit or short aliphatic chain tend to exhibit LC smectic C and/or A phases. The following observations were made: (1) the emergence of smectic C and/or A phases in all the polymers on the basis of 4,4′‐disubstituted DPTD, (2) formation of enantiotropic smectic C and/or A phases in the polymers containing a 1,4‐phenylene unit in the main chain, (3) formation of a more stable smectic C phase in the polymers having a short aliphatic [(CH₂)₄] chain, and (4) a decrease of the mesomorphic property of the polyesters in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD. Solution and solid‐state ultraviolet–visible and photoluminescent spectra indicated that all the polyesters display maximum absorbances and blue emissions arising from the DPTD moiety, whose peak maxima were shifted to lower wavelengths in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD as well as the aforementioned LC property. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2676–2687, 2003     

Main‐chain,thermotropic, liquid‐crystalline,hydrogen‐bonded polymers of 4,4′‐bipyridyl with aliphatic dicarboxylic acids

A series of main‐chain, thermotropic, liquid‐crystalline (LC), hydrogen‐bonded polymers or self‐assembled structures based on 4,4′‐bipyridyl as a hydrogen‐bond acceptor and aliphatic dicarboxylic acids, such as adipic and sebacic acids, as hydrogen‐bond donors were prepared by a slow evaporation technique from a pyridine solution and were characterized for their thermotropic, LC properties with a number of experimental techniques. The homopolymer of 4,4′‐bipyridyl with adipic acid exhibited high‐order and low‐order smectic phases, and that with sebacic acid exhibited only a high‐order smectic phase. Like the homopolymer with adipic acid, the two copolymers of 4,4′‐bipyridyl with adipic and sebacic acids (75/25 and 25/75) also exhibited two types of smectic phases. In contrast, the copolymer of 4,4′‐bipyridyl with adipic and sebacic acids (50/50), like the homopolymer with sebacic acid, exhibited only one high‐order smectic phase. Each of them, including the copolymers, had a broad temperature range of LC phases (36–51 °C). The effect of copolymerization for these hydrogen‐bonded polymers on the thermotropic properties was examined. Generally, copolymerization increased the temperature range of LC phases for these polymers, as expected, with a larger decrease in the crystal‐to‐LC transition than in the LC‐to‐isotropic transition. Additionally, it neither suppressed the formation of smectic phases nor promoted the formation of a nematic phase in these hydrogen‐bonded polymers, as usually observed in many thermotropic LC polymers. The thermal transitions for all of them, measured by differential scanning calorimetry, were well below their decomposition temperatures, as measured by thermogravimetric analysis, which were in the temperature range of 193–210 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1282–1295, 2003     

Organosoluble and light‐colored fluorinated polyimides from 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl and aromatic dianhydrides

A novel fluorinated diamine monomer based on 4,4′‐biphenol was synthesized via a straightforward, high‐yielding two‐step procedure. 4,4′‐Biphenol was reacted with 2‐chloro‐5‐nitrobenzotrifluoride in the presence of potassium carbonate to yield the intermediate dinitro compound, which was subsequently reduced to afford the fluorinated diamine, 4,4′‐bis(4‐amino‐3‐trifluoromethylphenoxy)biphenyl. A series of organosoluble fluorinated polyimides were prepared from the diamine with various aromatic dianhydrides via a conventional two‐step thermal imidization method. All polyimides were soluble in strong dipolar solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide. The polyimides showed excellent thermal and thermooxidative stability and good mechanical properties. No significant weight loss was observed below a temperature of 520 °C in nitrogen or in air, and the glass‐transition temperatures ranged from 247 to 313 °C. Low dielectric constants (2.57–3.65 at 10 kHz), low moisture absorption (0.1–0.7 wt %), and low color intensity were also observed. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 524–534, 2002; DOI 10.1002/pola.10113     

Synthesis and characterization of hydrogen‐bonded thermotropic liquid crystalline aromatic‐aliphatic poly(ester–amide)s from amido diol

Fifteen highly regular hydrogen‐bonded, novel thermotropic, aromatic‐aliphatic poly(ester–amide)s (PEAs) were synthesized from aliphatic amido diols by melt polycondensation with dimethyl terephthalate and solution polycondensation with terephthaloyl chloride. Intermolecular hydrogen bonds more or less perpendicular to the main‐chain direction induce the formation and stabilization of liquid crystalline property for these PEAs. The structure of these polymers, even in the mesomorphic phase is dominated by hydrogen bonds between the amide–amide and amide–ester groups in adjacent chains. Aliphatic amido diols were synthesized by the aminolysis of γ‐butyrolactone, δ‐valerolactone and ε‐caprolactone with aliphatic diamines containing a number of methylene groups from two to six in isopropanol medium at room temperature. Effects of polarity of the solvent on solution polymerization and effect of catalyst on trans esterification were studied. These polymers were characterized by elemental analysis, FTIR, ¹H NMR, ¹³C NMR, solubility studies, inherent viscosity, DSC, X‐ray diffraction, polarized light microscopy, and TGA. All the melt/solution polycondensed PEAs showed multiple‐phase transitions on heating with second transitions identified as nematic/smectic/spherullitic texture. The mesomorphic properties were studied as a function of their chemical structure by changing alternatively m or n. Odd‐even effect on mesophase transition temperature, isotropization temperature, and crystallinity were studied. The effect of molecular weight and polydispersity on mesophase/isotropization temperature and thermal stability were investigated. It was observed that there exists a competition for crystallinity and liquid crystallinity in these PEAs © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2469–2486, 2000     

Synthesis and characterization of liquid–crystalline polyesters with chiral and achiral twin spacers

A series of novel thermotropic main-chain chiral liquid–crystalline random copolyesters consisting of spacers of two different types—chiral and achiral—was synthesized. Polyesters (BmTa) with tartaric acid as the chiral spacer (Ta), aliphatic diols (with ‘m’ = 2–10 methylene groups) as the achiral spacers, and 4,4′-dihydroxy biphenyl (B) as the mesogen were synthesized via condensation polymerization in solution after duly protecting the 2,3-dihydroxy groups of tartaric acid by acetylation. The copolymers were characterized by Fourier transform infrared spectroscopy, ¹H and ¹³C NMR spectra, gel permeation chromatography, and thermogravimetric analysis. Transition temperatures for phase changes recorded by DSC were corroborated with the textures observed by a hot-stage optical polarizing microscope. The wide-angle X-ray diffraction (WAXD) profiles indicated a SmE phase at room temperature. The lower angle region at 2θ = 0.5–2.45 covered by WAXD indicated a layer of thickness of 161 Å, less than the molecular length for B0Ta. The [α_D] values were recorded on a digital polarimeter. The birefringence was lost at higher mesophase temperatures in lower members with m < 5, a behavior found in certain chiral systems, and the higher members with m > 5 showed a lesser number of phase transitions. On cooling, the polyesters produced a texture with the formation of transition bars. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1743–1752, 2001