Synthesis of poly(3‐hexylthiophene)‐block‐poly(ethylene)‐block‐poly(3‐hexylthiophene) via a combination of ring‐opening olefin metathesis polymerization and grignard metathesis polymerization

Novel rod–coil–rod ABA triblock copolymers, poly(3‐hexylthiophene)‐block‐poly(ethylene)‐block‐poly(3‐hexylthiophene) (P3HT‐b‐PE‐b‐P3HT) were synthesized by using a combination of a Ru‐catalyzed ring‐opening metathesis polymerization of 1,4‐cyclooctadiene in the presence of a suitable chain transfer agent (CTA) and a Ni‐catalyzed Grignard metathesis polymerization of 5‐chloromagnesio‐2‐bromo‐3‐hexylthiophene followed by hydrogenation. Using this methodology, the molecular weights of the poly(butadiene) (PBD) or the P3HT blocks were controlled by adjusting the initial monomer/CTA or the initial monomer/macroinitiator ratio, respectively. In addition, the triblock structure was confirmed by selective oxidative degradation of the PBD block found in the intermediate P3HT‐b‐PBD‐b‐P3HT copolymer produced in the aforementioned method, followed by analysis of the degradation products. Thermal analysis and atomic force microscopy of P3HT‐b‐PE‐b‐P3HT revealed that the material underwent phase separation in the solid state, a feature which may prove useful for improving charge mobilities within electronic devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3810–3817     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

Ring opening metathesis polymerization of triazole‐bearing cyclobutenes: Diblock copolymer synthesis and evaluation of the effect of side group size on polymerization kinetics

Cyclobutenes containing pendant groups of varying sizes were polymerized via ring opening metathesis polymerization using Grubbs catalyst 2nd generation (G2). The rate of polymerization depended on the size of the pendant groups attached to the cyclobutene rings, with longer side‐chains producing slower polymerization rates and narrower molecular weight distributions. The polymerization of these new molecules proceeded with first order kinetics, consistent with a living polymerization. Chain extension experiments produced cyclobutene‐based diblock copolymers with polydispersity indices below 1.33. The synthetic methods in this report will allow the use of G2 to access new complex polymeric architectures with a higher density of pendant groups than those derived from norbornene analogs and cyclooctene moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1929–1939     

One‐pot synthesis of polymeric nanoparticle by ring‐opening metathesis polymerization

Shell‐functionalized polymeric nanoparticle was prepared through the method of polymerization‐induced self‐assembly of block copolymers [poly(2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene)‐block‐poly(7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester), PBNBE‐b‐PONBDM] via one‐pot ring‐opening metathesis polymerization of 2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene (BNBE) and 7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester (ONBDM) in a selective solvent. The compositions and the molecular weights of the copolymers were estimated by ¹H‐NMR and gel permeation chromatography. The micelles were characterized by dynamic light scattering, transmission electron micrograph, and atomic force microscopy. The results indicated that the spherical micelles constructed with bromine‐bearing PBNBE shell and PONBDM core were stable and reproducible in toluene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

ABA triblock copolymers from two mechanistic techniques: Polycondensation and atom transfer radical polymerization

ABA triblock copolymers were synthesized using two polymerization techniques, polycondensation, and atom transfer radical polymerization (ATRP). A telechelic polymer was synthesized via polycondensation, which was then functionalized into a difunctional ATRP initiator. Under ATRP conditions, outer blocks were polymerized to form the ABA triblock copolymer. Six types of samples were prepared based on a poly(ether ether ketone) or poly(arylene ether sulfone) center block with either poly(methyl methacrylate), poly(pentafluorostyrene), or poly(ionic liquid) outer blocks. As polycondensation results in polymers with broad molecular weight distribution (MWD), the center of these triblock copolymers are disperse, while the outside blocks have narrow MWD due to the control afforded from ATRP. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 228–238     

Syntheses and properties of ABA,CBA, and CBC triblock copolymers based thermoplastic elastomers with glassy (A), elastomeric (B), and crystalline (C) blocks

In this contribution, we describe the syntheses, characterization, and properties of ABA, CBA and CBC triblock copolymers with glassy (A), elastomeric (B), and crystalline (C) blocks. These three hard-soft-hard triblock copolymers were prepared via living ring-opening metathesis copolymerization by use of Grubbs third generation catalyst through one-pot sequential monomer addition and subsequent hydrogenation. These hard-soft-hard triblock copolymers based thermoplastic elastomers have been analyzed by proton NMR, differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), IR, and transmission electron microscopy (TEM). The mechanical properties of these triblock copolymers were also measured by monotonic and step cyclic tensile test. Compared with the ABA triblock copolymer, the CBC triblock copolymer containing highly crystalline hard end-blocks shows enhanced tensile strength and the best elastic recovery of 90.8%. The hybrid CBA triblock copolymer displays much improved elongation, which is almost twice as long as the other two TPEs, and excellent elastic recovery of 87.0%.     

Bis‐dendritic polyethylene prepared by ring‐opening metathesis polymerization in the presence of bis‐dendritic chain transfer agents

The synthesis of ABA triblock copolymers is described, in which the A blocks are poly(benzyl ether) dendrons and the B block is polycyclooctene or polyethylene. Bis‐dendritic cis‐olefins were synthesized and used as chain transfer agents in ring‐opening metathesis polymerization of cyclooctene in a process that inserts the dendrons at the polymer chain‐ends. Evaluation of the polymer products by spectroscopic, chromatographic, and titration methods supports their triblock structure. Hydrogenation of the unsaturated polycyclooctene B‐block of these ABA triblock copolymers provides the first reported synthesis of bisdendritic polyethylene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5429–5439, 2005     

Poly(N‐vinyl pyrrolidone)‐block‐Poly(N‐vinyl carbazole)‐block‐poly(N‐vinyl pyrrolidone) triblock copolymers: Synthesis via RAFT/MADIX process,self‐assembly behavior,and photophysical properties

Poly(N‐vinyl pyrrolidone)‐block‐poly(N‐vinyl carbazole)‐block‐poly(N‐vinyl pyrrolidone) (PVP‐b‐PVK‐b‐PVP) triblock copolymers were synthesized via sequential reversible addition‐fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process. First, 1,4‐phenylenebis(methylene)bis(ethyl xanthate) was used as a chain transfer agent to mediate the radical polymerization of N‐vinyl carbazole (NVK). It was found that the polymerization was in a controlled and living manner. Second, one of α,ω‐dixanthate‐terminated PVKs was used as the macromolecular chain transfer agent to mediate the radical polymerization of N‐vinyl pyrrolidone (NVP) to obtain the triblock copolymers with various lengths of PVP blocks. Transmission electron microscopy (TEM) showed that the triblock copolymers in bulks were microphase‐separated and that PVK blocks were self‐organized into cylindrical microdomains, depending on the lengths of PVP blocks. In aqueous solutions, all these triblock copolymers can self‐assemble into the spherical micelles. The critical micelle concentrations of the triblock copolymers were determined without external adding fluorescence probe. By analyzing the change in fluorescence intensity as functions of the concentration, it was judged that the onset of micellization occurred at the concentration while the FL intensity began negatively to deviate from the initial linear increase with the concentration. Fluorescence spectroscopy indicates that the self‐assembled nanoobjects of the PVP‐b‐PVK‐b‐PVP triblock copolymers in water were capable of emitting blue/or purple fluorescence under the irradiation of ultraviolet light. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1852–1863     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Synthesis of polynorbornene‐poly(tert‐butyl acrylate) nanoparticles with original morphologies by tandem ROMP and ATRP in microemulsion

Composite latex particles based on homopolymers and graft‐copolymers composed of polynorbornene (PNB) and poly(tert‐butyl acrylate) (PtBA) were synthesized in microemulsion conditions by simultaneous combination of two distinct methods of polymerization: Ring‐opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP). Only one commercial compound (first generation Grubbs catalyst) was used to initiate the ROMP of norbornene (NB) and activate the ATRP of tert‐butyl acrylate (tBA). Well‐defined nanoparticles with hydrodynamic diameters smaller than 50 nm were prepared with original morphologies depending on the monomer compositions, the type of combination (polymer blend or graft‐copolymer), and the conditions of microemulsion polymerizations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of densely grafted comblike copolymers

Densely grafted copolymers were synthesized using the “grafting from” approach via the combination of reversible addition‐fragment chain transfer polymerization (RAFT) and atom transfer radical polymerization (ATRP). First, a novel functional monomer, 2,3‐di(2‐bromoisobutyryloxy)ethyl acrylate (DBPPA), with two initiating groups for ATRP was synthesized. It was then polymerized via RAFT polymerization to give macroinitiators for ATRP with controlled molecular weights and narrow molecular weight distributions. Last, ATRP of styrene was carried out using poly(DBPPA)s as macroinitiators to prepare comblike poly(DBPPA)‐graft‐polystyrenes carrying double branches in each repeating unit of backbone via “grafting from” approach. Furthermore, poly(DBPPA)‐graft‐[polystyrene‐block‐poly(t‐BA)]s and their hydrolyzed products poly(DBPPA)‐graft‐[polystyrene‐block‐poly(acrylic acid)]s were also successfully prepared. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 362–372, 2008     

Novel synthesis of biodegradable linear and star block copolymers based on ε‐caprolactone and lactides using potassium‐based catalyst

Biodegradable, triblock poly(lactide)‐block‐poly(ε‐caprolactone)‐block‐poly(lactide) (PLA‐b‐PCL‐b‐PLA) copolymers and 3‐star‐(PCL‐b‐PLA) block copolymers were synthesized by ring opening polymerization of lactides in the presence of poly(ε‐caprolactone) diol or 3‐star‐poly(ε‐caprolactone) triol as macroinitiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C‐NMR. The formation of block copolymers was confirmed by NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5363–5370, 2008     

Block copolymer nanoparticles of controlled sizes via ring‐opening metathesis polymerization

This article describes the formation and characterization of self‐assembled nanoparticles of controlled sizes based on amphiphilic block copolymers synthesized by ring‐opening metathesis polymerization. We synthesized a novel hydrophobic derivative of norbornene; this monomer could be polymerized using Grubbs' catalyst [Cl₂Ru(CHPh)(PCy₃)₂] forming polymers of controlled molecular weight. We synthesized amphiphilic block copolymers of controlled composition and showed that they assemble into nanoparticles of controlled size. The nanoparticles were characterized using dynamic light scattering and transmission electron microscopy. Tuning the composition of the block copolymer enables the tuning of the diameters of the nanoparticles in the 30‐ to 80‐nm range. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3352–3359, 2004     

Preparation of reactive block copolymers and their transformation to hollowed nanostructures

A novel polymeric hollow nanostructure was generated using micellar template method through a three‐step procedure. First, the block copolymers were synthesized via ring‐opening metathesis polymerization by sequentially adding monomers 7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester and the mixture of norbornene and 2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene in chloroform, and also atom transfer radical polymerization of 4‐(3‐butenyl)styrene was carried out by using the as‐obtained block copolymer poly(7‐oxanorborn‐5‐ene‐exo,exo‐2,3‐dicarboxylic acid dimethylester)‐block‐poly(norbornene‐co‐2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene as macroinitiator to afford a graft copolymer bearing poly(4‐(3‐butenyl)styrene) branch poly(7‐oxanorborn‐5‐ene‐exo,exo‐2,3‐dicarboxylic acid dimethylester)‐block‐poly(norbornene‐co‐2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene)‐graft‐poly(4‐(3‐butenyl)styrene). Second, the shell‐crosslinked micelles were prepared by ruthenium‐mediated ring‐closing metathesis of poly(4‐(3‐butenyl)styrene) branches in intramicelle formed from the copolymers self‐assembly spontaneously in toluene. Finally, the hollowed spherical nanoparticles were presented by removing the micellar copolymer backbone through the cleavage of the ester bonds away from the crosslinked network of branches. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ring-opening metathesis polymerization of new α-norbornenyl poly(ε-caprolactone) macromonomers

Poly(ε-caprolactone) (PCL) macromonomers capped by a polymerizable norbornene end-group have been synthesized and (co)polymerized by ring-opening metathesis with formation of graft copolymers and polymacromonomers. α-Norbornenyl PCL macromonomers have been synthesized by ring opening polymerization (ROP) of ε-caprolactone (εCL) initiated by 2-diethylaluminoxymethyl-5-norbornene. Copolymerization of these PCL macromonomers with norbornene and polymerizable derivatives has been catalyzed by the [RuCl₂(p-cymene)]₂ PCy₃/(trimethylsilyl)diazomethane complex yielding a series of poly(norbornene)-graft-poly(ε-caprolactone) copolymers. These new graft copolymers have been characterized by a set of analytical methods, i.e., SEC, ¹H-NMR, FTIR, DSC, and TGA. Furthermore, PCL macromonomers have been polymerized into high molecular weight comb chains of narrow molecular weight distribution (M_w/M_n = 1.10) within high yields (90%). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2447–2455, 1999     

Interfacial crosslinking of self‐assembled triblock copolymer nanoparticles via alkoxysilane hydrolysis and condensation

The use of amphiphilic triblock copolymers bearing a reactive alkoxysilane middle block as polymeric stabilizers is reported in this work. A series of poly(ethylene glycol) methyl ether methacrylate‐b‐(3‐trimethoxysilyl)propyl methacrylate‐b‐benzyl methacrylate (PEGMA‐b‐MPS‐b‐BzMA) triblock copolymers were prepared by RAFT solution polymerization and polymerization‐induced self‐assembly (PISA), respectively, where the various block lengths and overall composition were varied. The copolymers prepared by solution polymerization were employed as oil‐in‐water stabilizers where upon application of a catalyst, the 3‐(trimethoxysilyl)propyl methacrylate (MPS) block at the droplet interface was crosslinked to yield capsule‐like structures. The effectiveness of interfacial crosslinking was validated by dynamic light scattering and electron microscopy. In situ self‐assembly by the PISA method resulted in spherical nanoparticles of controllable size that were readily crosslinked by addition of base, with significant enhancement of colloidal stability. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1897–1907     

Biocompatible and pH‐responsive triblock copolymer mPEG‐b‐PCL‐b‐PDMAEMA: Synthesis,self‐assembly,and application

A series of well‐defined amphiphilic triblock copolymers [polyethylene glycol monomethyl ether]‐block‐poly(ε‐caprolactone)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] (mPEG‐b‐PCL‐b‐PDMAEMA or abbreviated as mPEG‐b‐PCL‐b‐PDMA) were prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization. The chemical structures and compositions of these copolymers have been characterized by Fourier transform infrared spectroscopy, ¹H NMR, and thermogravimetric analysis. The molecular weights of the triblock copolymers were obtained by calculating from ¹H NMR spectra and gel permeation chromatography measurements. Subsequently, the self‐assembly behavior of these copolymers was investigated by fluorescence probe method and transmission electron microscopy, which indicated that these amphiphilic triblock copolymers possess distinct pH‐dependent critical aggregation concentrations and can self‐assemble into micelles or vesicles in PBS buffer solution, depending on the length of PDMA in the copolymer. Agarose gel retardation assays demonstrated that these cationic nanoparticles can effectively condense plasmid DNA. Cell toxicity tests indicated that these triblock copolymers displayed lower cytotoxicity than that of branched polyethylenimine with molecular weight of 25 kDa. In addition, in vitro release of Naproxen from these nanoparticles in pH buffer solutions was conducted, demonstrating that higher PCL content would result in the higher drug loading content and lower release rate. These biodegradable and biocompatible cationic copolymers have potential applications in drug and gene delivery. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1079–1091, 2010     

Synthesis,characterization, and property of amphiphilic fluorinated abc‐type triblock copolymers

Novel amphiphilic fluorinated ABC‐type triblock copolymers composed of hydrophilic poly(ethylene oxide) monomethyl ether (MeOPEO), hydrophobic polystyrene (PSt), and hydrophobic/lipophobic poly(perfluorohexylethyl acrylate) (PFHEA) were synthesized by atom transfer radical polymerization (ATRP) using N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst system. The bromide‐terminated diblock copolymers poly(ethylene oxide)‐block‐polystyrene (MeOPEO‐b‐PSt‐Br) were prepared by the ATRP of styrene initiated with the macroinitiator MeOPEO‐Br, which was obtained by the esterification of poly(ethylene oxide) monomethyl ether (MeOPEO) with 2‐bromoisobutyryl bromide. A fluorinated block of poly(perfluorohexylethyl acrylate) (PFHEA) was then introduced into the diblock copolymer by a second ATRP process to synthesize a novel ABC‐type triblock copolymer, poly(ethylene oxide)‐block‐polystyrene‐block‐poly(perfluorohexylethyl acrylate) (MeOPEO‐b‐PSt‐b‐PFHEA). These block copolymers were characterized by means of proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC). Water contact angle measurements revealed that the polymeric coating of the triblock copolymer (MeOPEO‐b‐PSt‐b‐PFHEA) shows more hydrophobic than that of the corresponding diblock copolymer (MeOPEO‐b‐PSt). Bovine serum albumin (BSA) was used as a model protein to evaluate the protein adsorption property and the triblock copolymer coating posseses excellent protein‐resistant character prior to the corresponding diblock copolymer and polydimethylsiloxane. These amphiphilic fluoropolymers can expect to have potential applications for antifouling coatings and antifouling membranes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of organic–inorganic hybrid block copolymers containing a fully condensed ladder‐like polyphenylsilsesquioxane

A series of inorganic–organic hybrid block copolymers were synthesized via atom transfer radical polymerization using a fully condensed, ladder‐like structured polyphenylsilsesquioxane end‐functionalized macroinitiator. The inorganic portion, ladder‐like polyphenylsilsesquioxane, was synthesized in a one‐batch, base‐catalyzed system, whereas organic hard and soft monomers, styrene, and n‐butyl acrylate, were polymerized and copolymerized on the ends of the linear, inorganic backbone. Synthesized hybrid diblock, triblock, and random copolymers were characterized by ¹H NMR, ²⁹Si NMR, gel permeation chromatography, static light scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Hybrid block copolymers were well‐defined with low polydispersity (<1.4) and exhibited enhanced thermal properties in the form of increased glass transition and degradation onset temperatures over their organic analogues.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012