Modular Synthesis of Thermosensitive P(NIPAAm‐co‐HEMA)/β‐CD Based Hydrogels via Click Chemistry

Two kinds of representative polymers, poly(N‐isopropylacrylamide) (PNIPAAm) and β‐cyclodextrin (β‐CD) were selected and modified with azide and alkyne fucntional groups, respectively. When the solutions of these two modified polymers were mixed together, a cross‐linking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, occurred in the presence of Cu(I) catalyst. The strategy described here provides several advantages for the hydrogel formation including mild reaction conditions and controllable gelation rate. The resulted hydrogels were studied in terms of scanning electric microscopy (SEM), equilibrium swelling ratio and swelling/shrinking kinetics. The data obtained demonstrated the hydrogels had a porous structure as well as favorable thermosensitivity.

     

Controlled release of anti-diabetic drug metformin hydrochloride from cellulose/PEG/poly (SA) ter-polymeric hydrogels

In the present work, cellulose pulp, obtained from a paper industry, has been dissolved in PEG/NaOH system and the resulting solution has been polymerized in the presence of monomer sodium acrylate (SA) and crosslinker N, N’ methylene bisacrylamide (MB) via free radical polymerization. These gels have been loaded with anti-diabetic drug Metformin Hydrochloride (Met) and a detailed investigation of release of drug has been studied. Various kinetic models have been applied on the release data. Finally, the in-vivo study has been carried out on albino Wistar rats to see the efficacy of these hydrogel systems in lowering the glucose level.     

壳聚糖-聚丙烯酸复合水凝胶的药物控制释放行为

以壳聚糖(Cs)和丙烯酸(AA)为原料,利用自由基聚合法制备了具有孔洞结构的复合水凝胶Cs-PAA,并研究了AA的量、交联剂的量、聚合温度和AA的中和度对水凝胶溶胀度的影响以及复合水凝胶对烟酸的控制释放。 结果表明,Cs-PAA复合水凝胶具有良好的pH值、离子强度敏感性,且溶胀度最高达1228 g/g,其在pH=686的缓冲溶液中的烟酸累积释放率明显大于其在pH=1.80的缓冲溶液,因此Cs-PAA水凝胶可作为肠口服药物的载体。     

Structure and properties of cellulose/poly(N‐isopropylacrylamide) hydrogels prepared by IPN strategy

Interpenetrating polymer network (IPN) strategy was developed to fabricate novel hydrogels composed of cellulose and poly(N‐isopropylacrylamide) (PNIPAAm) with high mechanical strength and adjustable thermosensitivity. Cellulose hydrogels were prepared by chemically cross‐linking cellulose in NaOH/urea aqueous solution, which were employed as the first network. The second network was subsequently obtained by in situ polymerization/cross‐linking of N‐isopropylacrylamide in the cellulose hydrogels. The results from FTIR and solid ¹³C NMR indicated that the two networks co‐existed in the IPN hydrogels, which exhibited uniform porous structure, as a result of good compatibility. The mechanical and swelling properties of IPN hydrogels were strongly dependent on the weight ratio of two networks. Their temperature‐sensitive behaviors and deswelling kinetics were also discussed. This work created double network hydrogels, which combined the advantages of natural polymer and synthesized PNIPAAm collectively in one system, leading to the controllable temperature response and improvement in the physical properties. Copyright © 2009 John Wiley & Sons, Ltd.     

Diffusion of dextran within poly(methacrylic acid) hydrogels

We describe an investigation of fluorescence correlation spectroscopy into the diffusion of fluorescein‐tagged dextran (FDEX) in a poly(methacrylic acid) (PMAA) hydrogel. The temperature dependence of FDEX diffusion is shown to follow Zimm behavior in pure water, and the decrease in the diffusion coefficient when in the PMAA hydrogel has been modeled. The addition of acid and alkali (HCl and NaOH, respectively) not only control the swelling and collapse of the hydrogel but also reveal a strong pH dependence of the dextran diffusion coefficient, which shows a (nonmonatonic) increase with pH. The addition of NaCl and CaCl₂ salts similarly showed evidence of network swelling, most notably at low salt concentration, but also that the diffusion coefficient within the gel at these low concentrations is larger than that in the equivalent solution without the hydrogel, indicating that the combination of hydrogel and salt works to increase the diffusion coefficient above that in pure water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

Thermal transitions and structure of epoxy networks based on α, ω‐diamino terminated poly(propylene oxide)‐block‐poly(ethylene oxide)‐block‐poly(propylene oxide) swollen in water

Thermal transitions in epoxy networks prepared by reaction of α, ω‐diamino terminated poly(propylene oxide)‐block‐poly(ethylene oxide)‐block‐poly(propylene oxide) and diglycidyl ether of brominated Bisphenol A, swollen in water, were studied by differential scanning calorimetry (DSC) in a broad temperature range (from ?100 °C to 20 °C). Networks of two different values of initial molar ratio of amino and epoxy groups were prepared, r (r = 1.00, 2.00), and swollen with different amounts of water up to equilibrium concentration values. The qualitatively different kinds of experimental thermograms have been obtained for two networks and classified according to the amount of water in the sample on the basis of the phase diagram of the system. Also, the concentration dependence of the curves in this diagram (glass transition, melting, and crystallization) as well as the fraction of noncrystallizable water supply some information about the morphology of the system. In this sense, the existence of a microphase separated structure of swollen networks is suggested. The structure consists of hydrophilic and hydrophobic domains and depends on the initial molar ratio of the reactive groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 699–708, 2005     

Crystallization,thermal behavior,and compatibility of poly(ethylene oxide)/poly(propylene oxide) blends

Isothermal and nonisothermal crystallization kinetics of different poly(ethylene oxide)/poly(propylene oxide) blends were investigated by means of differential scanning calorimetry (DSC). Glass transition temperature of quenched samples have also been reported. Phase morphologies and poly(ethylene oxide) spherulite growth rates were analyzed by polarizing light transmission microscopy. Results show morphological changes along with regime transitions of poly(ethylene oxide) crystal growth. Kinetic analyses of the data suggest that, although the blend behaves as a noncompatible, phase-separated system, there exists a certain degree of interaction between polymer chains. © 1996 John Wiley & Sons, Inc.     

Thermosensitivity of optically active hydrogels constructed with N-(L)-(1-hydroxymethyl)propylmethacrylamide

We previously reported on the water soluble, optically active polymer, poly[N-(L)-(1-hydroxymethyl)propylmethacrylamide] (P(L-HMPMA)), which has lower critical solution temperatures of approximately 30 and 21 degrees C upon heating and cooling, respectively. The phase separation behavior of the P(L-HMPMA)-water binary system has a reversible and clear hysteresis during heating and cooling cycles. The present study describes the thermosensitive properties of the optically active polymer and its hydrogel. Circular dichroism and microcalorimetric measurements of the polymer in water supported the hypothesis that the soluble polymer chains might be compactly folded with an interaction between optically active side chains. In addition, these measurements showed the polymer chains in a state of relatively low hydration compared to that of P(D,L-HMPMA), which was free-radically synthesized from racemates of monomers. The solution properties reflected the swollen-shrunken behavior of corresponding hydrogels in response to temperature changes. The microscopic observation of aqueous polymer solutions and hydrogels also confirmed that the optically active properties of polymer chains affect their structure and thermosensitivity. SEM micrograph of the surfaces of the crosslinked P(L-HMPMA).     

Poly(polyol sebacate) Elastomers as Coatings for Metallic Coronary Stents

Biocompatible polymeric coatings for metallic stents are desired, as currently used materials present limitations such as deformation during degradation and exponential loss of mechanical properties after implantation. These concerns, together with the present risks of the drug‐eluting stents, namely, thrombosis and restenosis, require new materials to be studied. For this purpose, novel poly(polyol sebacate)‐derived polymers are investigated as coatings for metallic stents. All pre‐polymers reveal a low molecular weight between 3000 and 18 000 g mol^?1. The cured polymers range from flexible to more rigid, with E‐modulus between 0.6 and 3.8 MPa. Their advantages include straightforward synthesis, biodegradability, easy processing through different scaffolding techniques, and easy transfer to industrial production. Furthermore, electrospraying and dip‐coating procedures are used as proof‐of‐concept to create coatings on metallic stents. Biocompatibility tests using adipose stem cells lead to promising results for the use of these materials as coatings for metallic coronary stents.

     

Synthesis and Drug Release Properties of Thermosensitive Poly(N-vinylacetamide-co-vinylacetate) Hydrogels

Thermosensitive poly[N-vinylacetamide-co-vinylacetate][P(NVA-co-VAc)] hydrogels were prepared via free radical copolymerization from hydrophilic NVA and hydrophobic VAc in the presence of butylenes-bis (N-vinylacetamide)(Bis-NVA) as crosslinker. Scanning electron microscopy(SEM) images reveal that the as-prepared hydrogels were of three-dimensional network with irregular cave structure. The prepared hydrogels with more NVA in the feed swelled faster and the swelling ratio of the hydrogels gradually decrease...     

丙烯酰胺和葡萄糖烯丙基酰胺共聚水凝胶的合成与性能

用葡萄糖内酯与烯丙基胺反应制备了葡萄糖烯丙基酰胺单体（AAG），然后与丙烯酰胺和亚甲基双丙烯酰胺共聚得到含糖结构的水凝胶，研究了交联剂浓度和单体配比对共聚合的影响，用红外光谱和热重分析对其结构和热稳定性进行了表征，并计算了干凝胶的热分解活化能，研究了温度、盐的浓度，溶液的PH值及蛋白质对水凝胶的膨胀比的影响，结果发现水凝胶的膨胀比随着温度的提高或盐浓度的增大而略有增加，在高或低的PH时膨胀比由于糖组分的水解也有一定的增加，水凝胶在蛋白质丰在时发生收缩，表明二者发生了键合作用。     

明胶-聚异丙基丙烯酰胺水凝胶的溶胀动力学

采用明胶（Gel)和N－异丙基丙烯酰胺（NIPAM）为原料，制备了Gel/聚异丙基丙烯酰胺（PNIPAM）水凝胶系列；研究了原料配比、pH值及温度对水凝胶溶胀速度的影响。结果表明，当温度大于PNIPAM的最低临界溶液温度（LCST）值时，Gel/PNIPAM水凝胶的溶胀速度随着组分中PNIPAM的增加而降低，且溶胀过程以扩散渗透控制为主。而pH对水凝胶溶胀速度的影响与温度有关。Gel/PNIPAM配比为5／5，温度大于LCST时，水凝胶的pH敏感性受明胶控制；温度低于LCST时，pH对水凝胶的溶胀速度的影响很小。     

Protein‐ and homo poly(amino acid)‐based hydrogels with super‐swelling properties

The use of super‐swelling polymers is steadily increasing and the applications in industry are continuing to grow. With the authorization of the superabsorbents in food packaging by the Food and Drug Administration recently, demand may soon take off in the market. However, the increase in prices of petroleum products in recent years may be a drawback for these acrylic‐based materials. Thus, there is now a need to develop natural‐based super‐swelling hydrogels which are more economical and environment friendly. In addition, the super‐swelling gels are promising novel functions in the biomedical and pharmaceutical applications. This review is aimed to highlight research and trends in protein‐ and homo poly(amino acid)‐based super‐swelling hydrogels. Thus, the proteinaceous hydrogels, including chemically modified soy‐, fish‐ and collagen‐based proteins, are discussed. The protein‐polysaccharide, protein‐synthetics, and the inorganic composites are also investigated as hybrid materials. Finally, the super‐swelling hydrogels based on homo polypeptides, i.e. poly(aspartic acid), poly(glutamic acid), and poly(ε‐L‐lysine) are reviewed. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis, characterization and swelling properties of a chemically cross-linked poly(vinyl alcohol) hydrogel

A poly(vinyl alcohol) hydrogel was prepared by coupling poly(vinyl alcohol) with epichlorohydrin as the cross-linking agent. The structure of the hydrogel was characterized by FTIR and GPC techniques. Various amounts of water were added into the dry gel to swell it, and the quantity of water in various states in the partially swollen hydrogel was determined by DSC technique. The analytical results indicate that the water introduced into the dry gel first combines with the hydrophilic groups of the network chains through hydrogen bond forming non-freezable water. The weight ratio of the non-freezable water to dry gel in the hydrogels is about 0.20. After the non-freezable water is saturated, the additional water penetrates the network space and exists simultaneously both in the freezable and free water states until reaching equilibrium swelling. Translated from Acta Polymeric Sinica, 2006, (5): 671–675 (in Chinese)     

(1‐Adamantyl)methyl Glycidyl Ether: A Versatile Building Block for Living Polymerization

(1‐Adamantyl)methyl glycidyl ether (AdaGE) is introduced as a versatile monomer for oxyanionic polymerization, enabling controlled incorporation of adamantyl moieties in aliphatic polyethers. Via copolymerization with ethoxyethyl glycidyl ether (EEGE) and subsequent cleavage of the acetal protection groups of EEGE, hydrophilic linear polyglycerols with an adjustable amount of pendant adamantyl moieties are obtained. The adamantyl unit permits control over thermal properties and solubility profile of these polymers (LCST). Additionally, AdaGE is utilized as a termination agent in carbanionic polymerization, affording adamantyl‐terminated polymers. Using these structures as macroinitiators for the polymerization of ethylene oxide affords amphiphilic, in‐chain adamantyl‐functionalized block copolymers.

     

N-异丙基丙烯酰胺-丙烯酰胺热敏凝胶的溶胀特性

制备并表征了N-异丙基丙烯酰胺-丙烯酰胺热敏凝胶(NIPAm-Am),研究了单体配比、引发剂、交联剂用量和温度对其溶胀特性的影响。结果表明：NIPAm-Am热敏凝胶是由亲水和疏水基团组成的非晶高聚物。mAm／mNIPAm越大,凝胶的平衡溶胀率越大;增加交联剂的用量,凝胶的溶胀率减小,当引发剂的质量分数为0．008时溶胀率达最大值;温度的增加会使凝胶的溶胀率减小,在相转变温度时,溶胀率的变化最大。     

Self‐Assembled,Thermosensitive PCL‐g‐P(NIPAAm‐co‐HEMA) Micelles for Drug Delivery

Summary: A novel thermosensitive amphiphilic copolymer (PCL‐g‐P(NIPAAm‐co‐HEMA)) comprised of hydrophobic PCL segments and hydrophilic P(NIPAAm‐co‐HEMA) segments was designed and synthesized. The structure of the copolymer was characterized by FT‐IR, ¹H NMR and GPC analysis. The copolymer may self‐assemble into micelles in water and the resulting micelles demonstrated temperature sensitivity with a lower critical solution temperature (LCST) of 33 °C. The critical micellar concentration (CMC) obtained from surface tension measurements and the fluorescence method was around 30 mg · L⁻¹. Transmission electron microscopy (TEM) showed that the micelles exhibit a nanospheric morphology within a narrow size range of 150–160 nm. A cytotoxicity study showed that the PCL‐g‐P(NIPAAm‐co‐HEMA) copolymer exhibits good biocompatibility. The controlled drug release of the resulting micelles was investigated and it was found that micelles loaded with prednisone acetate showed improved drug release behavior due to the special micellar structure.

Self‐assembly of the PCL‐g‐P(NIPAAm‐co‐HEMA) copolymers.     

Synthesis and magnetic resonance of new heteropolynuclear Ln(III)-Cu(II) complexes with noncyclic polyether Schiff base

Ｎｏｎｃｙｃｌｉｃｐｏｌｙｅｔｈｅｒｓｈａｖｅａｔｔｒａｃｔｅｄｍｏｒｅａｎｄｍｏｒｅａｔｔｅｎｔｉｏｎｆｏｒｔｈｅｉｒｎｏｎｅｘｐｅｎｓｉｖｅ,ｌｅｓｓｔｏｘｉｃｉｔｙａｎｄｓｏｏｎ.Ｔｈｅｙｈａｖｅｓｏｍｅｐｒｏｍｉｓｉｎｇａｐｐｌｉｃａｔｉｏｎｓｉｎｓｏｌｖｅｎｔｅｘｔｒａｃｔｉｏｎａｎｄｅｎｒｉｃｈｍｅｎｔｏｆｍｅｔａｌｉｏｎｓａｓｗｅｌｌａｓｉｎｔｈｅｉｏｎｓｅｌｅｃｔｉｖｅｅｌｅｃｔｒｏｄｅ,ｅｔｃ.[1].ＮｏｎｃｙｃｌｉｃｐｏｌｙｅｔｈｅｒＳｃｈｉｆｆｂａｓｅｉｓｏｎｅｏｆｐｏｌｙｄｅｎ…