Electron spin resonance study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. V. Comparison with polypropylene and ethylene‐propylene copolymer

We studied the chemical reaction process of polypropylene (PP), ethylene‐propylene copolymer (EPM), and ethylene‐propylene‐diene copolymer (EPDM) crosslinking induced by dicumyl peroxide (DCP) using electron spin resonance (ESR). Free radicals appeared at an elevated temperature of around 120 °C and the behavior and kinetics of the reaction process were observed at 180 °C. The radical species detected in PP were alkyl type radicals, formed by the abstraction of hydrogen atoms from the tertiary carbon of polymer chains. For EPDM containing a diene component, the radicals were trapped at double bonds in this diene component to form allyl radicals. The resolutions of these spectra were extremely clear; hence, isotropic spectra of these polymer radicals were obtained. We measured the ESR at high temperatures and confirmed that the process of crosslinking induced by DCP was a free radical reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3383–3389, 2000     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. III. Effect of amine type antioxidants

The effect of antioxidant on the reaction mechanism of chemical crosslinking of polyethylene with dicumyl peroxide (DCP) at high temperatures was investigated by electron spin resonance (ESR). The crosslinking reactions were induced by the alkyl radicals in polyethylene (PE) formed by the thermal decomposition of DCP above 120°C. The type and the content of radicals were much changed for amine type antioxidants on PE crosslinking. It was confirmed that the radicals originated from DCP decomposition reacted preferentially with the amine type antioxidants to produce the nitroxyl radical and that the antioxidants retarded the initiation reaction of the PE crosslinking reaction. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 349–356, 1999     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent—II. The effect of phenolic antioxidants

The effect of antioxidant on the reaction mechanism of chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated by electron spin resonance (ESR). The antioxidant reacts with the alkyl radicals in PE formed by the thermal decomposition of DCP above 120°C, and disturbs the crosslinking. A phenolic type antioxidant produced the phenoxy radical by the reaction with alkyl radicals formed in PE. It is suggested that the selection of a suitable antioxidant for PE crosslinking can be made by ESR analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2431–2439, 1997     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent. IV. Effect of sulfur‐ and phosphorous‐type antioxidants

The effect of an antioxidant on the reaction mechanisms of chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated using electron spin resonance (ESR). For sulfur‐ and phosphorous‐type antioxidants, changes of radical species and their contents during the PE crosslinking reaction were observed. It was confirmed that these antioxidants reacted preferentially with radicals yielded by decomposed DCP, restraining the crosslinking of PE by the increased antioxidant content. The compound of DCP and antioxidant decomposed to form 2‐phenyl isopropyl radicals. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3092–3099, 2000     

ESR study on chemical crosslinking reaction mechanisms of polyethylene using a chemical agent

The reaction mechanisms of thermal crosslinking of polyethylene with dicumyl peroxide (DCP) at high temperatures were investigated by electron spin resonance (ESR). The crosslinking reactions were induced by the alkyl radicals formed by the thermal decomposition of DCP above 120°C. The kinetics of the free radical reaction were followed during crosslinking reactions at temperatures between 145 and 180°C. © 1997 John Wiley & Sons, Inc.     

Chemical modification of poly(lactic acid) induced by thermal decomposition of N‐acetoxy‐phthalimide during extrusion

Chemical modification of poly(lactic acid) (PLA) with N‐acetoxy‐phthalimide (NAPI) was performed in the melt by reactive extrusion, without using any peroxide initiator. The aminyl and nitroxide radicals produced from the NAPI thermal degradation, were, respectively, used (a) to create PLA macroradicals, and (b) to functionalize the PLA samples through nitroxide radical coupling. Depending on the extrusion temperature and the initial NAPI concentration, grafting rates up to 0.24 mol % were measured, modifying the PLA optical properties. This study represents an original new way of modification of PLA without the use of conventional peroxide initiators. Indeed, the undesirable side reactions (PLA branching or crosslinking) usually observed when using peroxides to initiate the radical grafting of PLA were avoided when using NAPI. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 120–129     

Isobutylene‐rich macromonomers: Dynamics and yields of peroxide‐initiated crosslinking

New isobutylene‐rich elastomers bearing multiple pendant styrenic, acrylic, maleimidic, vinylic, and allylic functional groups have been prepared and examined in the context of peroxide‐initiated crosslinking. Halide displacement from brominated poly(isobutylene‐co‐isoprene) (BIIR) by the requisite carboxylate nucleophiles in homogeneous toluene solutions provide the desired esters in quantitative yield without complications from dehydrohalogenation or premature crosslinking. Heating the resulting macromonomers with dicumyl peroxide to 160 °C under solvent‐free conditions gives thermoset derivatives, with reaction rates and yields depending markedly on functional group structure. In general, high cure extents can only be achieved using highly reactive pendant functional groups, owing to the competitive balance between crosslinking through C?C oligomerization, and degradation through β‐scission of backbone macroradical intermediates. Independent control of crosslinking rates and cure extents is gained through the use of nitroxyl radical traps bearing acrylate functionality. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 123–132     

Electron spin resonance study on chemical‐crosslinking reaction mechanisms of polyethylene using a chemical agent. VI. Effect of α‐methyl styrene dimer

The effect of α‐methyl styrene dimer (AMSD), which is used as a scorch retarder, on the reaction mechanisms of the chemical crosslinking of polyethylene (PE) with dicumyl peroxide (DCP) at high temperatures was investigated using electron spin resonance. When AMSD was added to PE containing DCP, the AMSD radical was observed; however, the PE alkyl radical or allyl radical presence was not detected. At 145 °C, crosslinking was obstructed as a result of the reaction between AMSD and alkyl radicals. As the temperature increased, AMSD fragmented to form 2‐phenyl‐2‐propyl and double bonds in PE. This generation of double bonds, however, accelerated crosslinking at 180 °C and was more effective than when AMSD was not present. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2151–2156, 2001     

Kinetic investigations on the photopolymerization of di- and tetrafunctional methacrylic monomers in polymeric matrices. ESR and calorimetric studies. II. Postpolymerization reactions

The reaction kinetics in the dark of photopolymerized mono- and dimethacrylates in a polymeric binder has been studied. Electron spin resonance spectroscopy (ESR) provided useful information regarding the nature of the radicals involved in postpolymerization reactions. Computer simulations were performed to study the decay of the propagating radicals by considering normal bimolecular termination and transfer reactions of the radicals to the binder. Differences were found in the termination reactions for mono- and difunctional monomers when they were photopolymerized in a solid medium. Absolute kinetic constants for H-transfer reaction with the binder, relative kinetic rate constants for radical–radical coupling, and average lifetimes for the radicals have been calculated. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2785–2791, 1998     

Skewered reactions in free‐radical crosslinking (co)polymerizations of liquid polybutadiene as internal olefinic multivinyl crosslinker

As an extension of our continuing studies concerned with the mechanistic discussion of network formation in the free‐radical crosslinking (co)polymerization of multivinyl monomers, this work refers to the skewered reactions in the crosslinking (co)polymerizations of liquid polybutadiene rubber (LBR) as an internal olefinic multivinyl monomer or crosslinker, especially focused on the competitive occurrence of both addition or skewered reaction to internal carbon–carbon (CC) double bonds and abstraction reaction of allylic hydrogens in LBR by growing polymer radical. Thus, LBR is regarded as an internal olefinic multiallyl monomer‐linked allyl groups (? CH?CH? CH₂? ) with methylene units (? CH₂? ). First, gelation in the polymerization of LBR was explored in detail, especially at elevated temperatures. The occurrence of intermolecular crosslinking was easier in the order LBR > LBR containing 20 mol % of 1,2‐structural units > liquid polyisoprene rubber. Then, we pursued the polymerization of LBR using dicumyl peroxide (DCPO) as typical organic peroxide used at elevated temperatures. The primary cumyloxy radical generated by the thermal decomposition of DCPO may add to CC double bond or abstract allylic hydrogen or undergo β‐scission to generate a secondary methyl radical. The initiation by the cumyloxy radical was omitted. The ratio of allylic hydrogen abstraction to β‐scission reaction was estimated; thus, only 39% of cumyloxy radical was used for the allylic hydrogen abstraction reaction. The addition of methyl radical to CC double bond was clearly observed. Finally, we pursued the intermolecular and intramolecular skewered reactions in free‐radical crosslinking LBR/vinyl pivalate copolymerizations. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oxidative copolymerization of indene with p‐tert‐butylstyrene: Synthesis,characterization, thermal analysis,and reactivity ratios

Copolyperoxides of indene and p‐tert‐butylstyrene of different compositions were synthesized by free‐radical‐initiated oxidative copolymerization. The compositions of the copolyperoxides, obtained from ¹H and ¹³C NMR spectra, were used to calculate the reactivity ratios of the monomers. The reactivity ratios indicated a larger proportion of indene units in random placement in the copolyperoxides. Thermal‐degradation studies by differential scanning calorimetry and electron‐impact mass spectrometry supported alternating peroxide units in the copolymer backbone. The activation energy for thermal degradation suggested that the degradation was dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. The flexibility of the copolyperoxides was examined in terms of the glass‐transition temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 9–18, 2002     

Investigations of thermal polymerization in the stable free‐radical polymerization of 2‐vinylnaphthalene

The feasibility of utilizing stable free‐radical polymerization (SFRP) in the synthesis of well‐defined poly(2‐vinylnaphthalene) homopolymers has been investigated. Efforts to control molecular weight by manipulating initiator concentration while maintaining a 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO):benzoyl peroxide (BPO) molar ratio of 1.2:1 proved unsuccessful. In addition, systematic variations of the TEMPO: BPO molar ratio did not result in narrow molecular weight distributions. In situ Fourier transform infrared spectroscopy (FTIR) indicated that the rate of monomer disappearance under SFRP and thermal conditions were identical. This observation indicated a lack of control in the presence of the stable free radical, TEMPO. The similarities in chemical structure between styrene and 2‐vinylnaphthalene suggested thermally initiated polymerization occurred via the Mayo mechanism. A kinetic analysis of the thermal polymerization of styrene and 2‐vinylnaphthalene suggested that the additional fused ring in 2‐vinylnaphthalene increased the propensity for thermal polymerization. The observed rate constant for thermal polymerization of 2‐vinylnaphthalene was determined using in situ FTIR spectroscopy and was one order of magnitude greater than styrene, assuming pseudo‐first‐order kinetics. Also, an Arrhenius analysis indicated that the activation energy for the thermal polymerization of 2‐vinylnaphthalene was 30 kJ/mol less than styrene. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 583–590, 2002; DOI 10.1002/pola.10131     

Kinetics of the crosslinking reaction of a bisnadimide model compound in thermal and microwave cure processes

The kinetic studies of the crosslinking reaction of a nadic end-capped imide model compound, N,N′-(oxydi-3,4′-phenylene) bis(5-norbornene-2,3-dicarboximide), a bisnadimide, in thermal and microwave processes were investigated. The conversion of the endo isomer to exo isomer proceeds at a much lower temperature than the crosslinking reaction. The crosslinking reaction was monitored by the combined decrease in the infrared absorptions of the endo and exo isomers at 840 and 780 cm⁻¹, respectively. The decrease in the concentration of starting materials follows first-order kinetics in the thermal and microwave processes. At the same temperatures (230 or 280°C), the crosslinking reaction proceeds at about 10 times faster in the microwave process than in the thermal process. Solid-state ¹³C-NMR showed no significant loss in C=C double bond resonance in the cured products by comparison with the starting material. This study provides direct evidence that the microwave process may be an efficient method to cure nadic end-capped polyimides. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2653–2665, 1998     

Monitoring polyolefin modification along the axis of a twin‐screw extruder. II. Maleic anhydride grafting

The physico‐chemical phenomena developing along the screw axis of a twin‐screw extruder during the grafting of maleic anhydride (MA) onto polyolefins [polyethylene (PE), ethylene–propylene rubber (EPM), and polypropylene (PP)] were investigated. For this purpose, sampling devices located along the extruder barrel were used to collect polymer samples that were subsequently characterized to follow the degrees of grafting and crosslinking or degradation. A similar evolution of MA grafting was observed regardless of the polyolefin type or MA and peroxide concentration when grafting was performed under identical conditions, that is, the same peroxide type and set temperature. A correlation between the MA grafting and the calculated peroxide decomposition was established. Chemical reactions occurred along the extruder axis until the peroxide was fully converted. More detailed quantitative measurements of the peroxide decomposition and MA grafting would allow the development of accurate process models. The final MA content depended on the polyolefin composition (PE > EPM ≫ PP). As expected for PE, crosslinking occurred in addition to grafting, but after a certain residence time, the PE network degraded. The PP viscosity reduction after MA grafting was due to the conversion of tertiary PP radicals into primary PP radicals after grafting. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3919–3932, 2000     

Free radical and thermal curing of terpyridine‐modified terpolymers

Terpolymers bearing terpyridine as well as (meth)acrylates as free radical curable groups (UV‐curing) or hydroxyl groups (thermal curing with bis‐isocyanates) were synthesized and characterized using ¹H NMR, IR and UV‐vis spectroscopy as well as GPC. Subsequently, the ability of covalent crosslinking via the UV‐initiated polymerization of the acrylate groups was investigated. Moreover, the thermal covalent crosslinking via the reaction of hydroxyl functionalized terpolymer and bis‐isocyanate compounds could be successfully achieved. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4028–4035, 2004     

Unusually facil cis to trans isomerization of a polypropiolate bearing a long alkyl chain polymerized using a [Rh(norbornadiene)Cl]2 catalyst: An ESR study

Alkylpropiolate having n-hexadecyl moiety in the ester group was stereospecifically polymerized with a [Rh(norbornadiene)Cl]₂ complex catalyst in alcohol to give rise to cis-transoid polyacetylenes in high yields. The unusually facile cis to trans isomerization for the polymer was found to be induced when the polymer was warmed to even less than ca. 57°C. Under these conditions ESR spectra bearing hyperfine structures due to the radicals generated by the rotational scission in the cis–π bond were observed. This isomerization induced a large g value shift in the ESR spectra together with an increase of the radical concentration during the isomerization, indicating formation of planar conjugated trans sequences that stabilize mobile unpaired electrons as solitons. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2457–2461, 1998     

Synthesis and characterization of copolyperoxides of indene with styrene, α‐methylstyrene,and α‐phenylstyrene

The oxidative copolymerization of indene with styrene, α‐methylstyrene, and α‐phenylstyrene is investigated. Copolyperoxides of different compositions have been synthesized by the free‐radical‐initiated oxidative copolymerization of indene with vinyl monomers. The compositions of the copolyperoxides obtained from the ¹H and ¹³C NMR spectra have been used to determine the reactivity ratios of the monomers. The reactivity ratios indicate that indene forms an ideal copolyperoxide with styrene and α‐methylstyrene and alternating copolyperoxides with α‐phenylstyrene. Thermal degradation studies via differential scanning calorimetry and electron‐impact mass spectroscopy support the alternating peroxide units in the copolyperoxide chain. The activation energy for thermal degradation suggests that the degradation is dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. Their flexibility has been examined in terms of the glass‐transition temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2004–2017, 2002     

The effect of ions irradiation on the thermal properties of poly(ether ether ketone)

The effect of irradiating amorphous poly (ether ether ketone), PEEK, with ions, 11 MeV proton (H⁺), and 25.6 MeV helium (He²⁺), has been investigated focusing on the changes in thermal properties. The extent of chain scission and crosslinking was evaluated using the Charlesby‐Pinner equation. Crosslinking increased the glass transition temperature (T_g) in line with the DiBenedetto equation from which the crosslinking constant for each ion was calculated. The effect of irradiation on the thermal degradation kinetics was studied in an argon atmosphere at a constant heating rate by mean of the Chang and the second Kissinger methods. Irradiation significantly reduced the thermal stability of the polymer and its service lifetime. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2212–2221, 2008     

Thermal decomposition of aliphatic peroxy acids

The thermal decomposition reactions of aliphatic peroxy acids containing from 8 to 16 carbon atoms in a molecule were studied. It was found that the carbon radical length had no effect on the thermal stability of peroxide groups. The apparent rate constants of thermolysis of peroxydecanoic acid in various solvents and the activation energies of the test reaction were found. The thermal degradation of peroxy acids involved secondary reactions of induced chain degradation in addition to the primary homolysis of the peroxide group. The rate constants of induced chain degradation were found.     

Reactivity ratios for the terpolymerization of methyl methacrylate,vinyl acetate,and molecular oxygen

The copolymerization of methyl methacrylate (MMA) and vinyl acetate (VAc) under high oxygen pressure was investigated. Copolyperoxides of various compositions were synthesized by the free‐radical‐initiated oxidative copolymerization of MMA and VAc monomers. The copolyperoxide compositions obtained from ¹H and ¹³C NMR spectra were used for determining the reactivity ratios of the monomers. The reactivity ratios indicated a larger proportion of MMA units statistically placed in the copolyperoxides. A theoretical analysis based on semiempirical AM1 calculations was performed to support the reactivity ratios. NMR studies showed irregularities in the copolyperoxide chain due to the cleavage reactions of the propagating peroxide radical. Thermal analyses of the copolyperoxides by differential scanning calorimetry gave evidence for the presence of alternating peroxide units in the copolyperoxide chain. The activation energies of thermal degradation suggested that degradation was controlled by the dissociation of the peroxide (? O? O? ) bond in the backbone of the copolyperoxide chain. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 564–572, 2002; DOI 10.1002/pola.10115