Synthesis and characterization of oxazoline-functional polymer particles by free radical nonaqueous dispersion polymerization

A novel oxazoline-functional methacrylate was prepared and employed as comonomer to produce nonaqueous dispersions of oxazoline-functional polymer particles. In nonaqueous free radical dispersion copolymerization of methylmethacrylate in the presence of oxazoline-functional methacrylate, ethyleneglycoldimethacrylate crosslinking agent, AIBN initiator, and polystyrene-block-poly(ethene-alt-propene) dispersing agent, the average polymer particle size, varying between 100 and 500 nm, was controlled by the dispersing agent contents. According to titration with HClO₄ all oxazoline groups regardless of their location at particle surface or bulk, were accessible. Glass transition temperature decreased from 120 to 0°C when oxazoline functional methacrylate was increased from 0 to 95 mol %. As imaged by atomic force microscopy incorporation of the new oxazoline-functional methacrylate improved film formation. Oxazoline-functional polymer particles were easy to redisperse in a variety of other diluents. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2539–2548, 1997     

Variation of surface unevenness of anomalous composite polymer particles produced by the stepwise heterocoagulation of small particles onto large particle by heat treatment

Variation of surface unevenness of anomalous composite polymer particles produced by the stepwise heterocoagulation, which we had suggested in previous articles, of small cationic polymer particles onto large anionic polymer particle (LP) by heat treatment was examined with transmission and scanning electron microscopes. When the anomalous polymer emulsion was kept at higher temperature than the glass transition temperature ofLP, the particle surfaces were continuously changed from uneven to smooth state with the treatment time.Part CXLII of the series of Studies on Suspension and Emulsion     

Supermicron polymer particles with core‐shell type morphologies

Polymer particles with controlled morphologies and having diameters from about 1–20 μ can be prepared using a new suspension polymerization‐based procedure. In contrast to existing procedures using emulsion polymerization, this process allows efficient preparation of supermicron particles that can be easily isolated as a dry powder. Control of the particle morphology is obtained by manipulating the monomer conversion at the beginning of the second stage of the reaction (when the second monomer is added). Two systems are studied. The first system uses styrene added to a partially polymerized MMA host particle, whereas the second system uses styrene added to a partially polymerized 45 wt % styrene to 55 wt % butyl methacrylate host particle. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 345–351, 2000     

Monodispersed polymer particles with tunable surface structures: Droplet microfluidic-assisted fabrication and biomedical applications

Polymer particles are key materials in various biomedical applications, including drug delivery, cellular immunity, cell capture, biochip, etc. Droplets produced by microfluidics have been widely applied as templates for the fabrication of polymer particles with controllable sizes and narrow size distributions. Compared to smooth polymer particles, those with surface microstructures (e.g., tentacles, bubbles, wrinkles and pits) are more attractive due to their increased surface area and biomimetic structural characteristics. In this review, we summarized representative methods for the preparation of monodispersed polymer particles with various surface microstructures based on droplet microfluidics, as well as their typical bioapplications in drug delivery, cellular immunity and cell capture. Finally, the current challenges and further development in this research area are discussed.     

Synthesis and characterization of monodisperse porous polymer particles

Monodisperse porous polymer particles in the size range of 10 μm in diameter were prepared via seeded emulsion polymerization. Linear polymer (polystyrene seed) or a mixture of linear polymer and solvent or nonsolvent were used as inert diluents. The pore diameters of these porous polymer particles were on the order of 1000 Å with pore volumes up to 0.9 mL/g and specific surface areas up to 200 m²/g. The physical features of the porous polymer particles depended on the diluent type and the crosslinker content, as well as the molecular weight of polymer seed particles. By varying the molecular weight of the linear polymer, monodisperse porous polymer particles with different pore size distribution could be synthesized. Polymer seed with a low degree of crosslinking instead of linear polymer could also be used to prepare monodisperse porous polymer particles with smaller pore volume and pore size.     

Influences of the locations of monomer and initiator in the seeded polymerization systems on the morphologies of micron-sized monodispersed composite polymer particles

Three kinds of micron-sized monodispersed polystyrene (PS)/poly(n-butyl methacrylate) (PBMA) composite particles (PS/BMA=2/1, wt. ratio) were produced by two kinds of seeded polymerizations ofn-butyl methacrylate (BMA) in the presence of about 2 m-sized monodispersed PS particles, and their morphologies were examined. One was produced by a seeded dispersion polymerization where almost monomers and initiators exist in an ethanol/water (1/1, w/w) medium. The others two were produced by seeded polymerizations utilizing the dynamic swelling method, where almost monomers exist in the PS seed particles, with 2,2-azobisisobutyronitrile initiator in the monomer-swollen particles and with 2,2-azobis [2-(2-imidazolin-2-yl)propane] initiator in an ethanol/water (1/5, w/w) medium. In the former polymerization, the produced composite particles had a core-shell structure consisting of a PS-core and a PBMA-shell, whereas in the latter two polymerizations, they had a POO (Polymeric Oil-in-Oil) structure consisting of a PS-matrix and many PBMA-domains, regardless of the location of initiator in the systems. From these results, it is concluded that the location of BMA monomer in the seeded polymerization systems with micron-sized monodispersed PS seed particles greatly affects the morphologies of produced PS/PBMA composite particles.Part CLI of the series Studies on Suspension and Emulsion     

Morphology of polymer networks polymerized in highly ordered liquid crystalline phases

The morphology and optical properties of polymer stabilized liquid crystals formed in a more highly ordered low molecular weight liquid crystal solvent were studied. Tetrafunctional, mesogenic monomers (with and without flexible spacers) were polymerized in isotropic, nematic and smectic phases of the LC solvent (4′-octyl-4-cyanobiphenyl) and studied with scanning electron microscopy and cross-polarized light microscopy. The network morphology of the nematic and isotropic phase polymerizations showed strong similarities with the corresponding polymerizations in other solvents. Polymerization in the smectic phase, however, resulted in marked increases in network order and directionality. Most dramatically, even the polymer without flexible spacer formed a fibrous network of rodlike units, in contrast to the random, beaded texture formed by the same polymer in nematic or isotropic conditions. Correspondingly, a large increase in birefringence demonstrated significant polymer orientation and more effective orientational interaction with the liquid crystalline solvent.     

Ion-exclusion chromatography of carboxylic acids on silica gel modified with aluminium

The modification of silica gel with aluminium by a coating method was effective for the preparation of a silica-based stationary phase, which acted as a cation exchanger under strongly acidic conditions. In order to expand the utility of the laboratory-made aluminium-adsorbing silica gel it was applied as a stationary phase to the ion-exclusion chromatography of various carboxylic acids. Good separations for both aliphatic carboxylic acids and benzenecarboxylic acids with a hydrophobic nature under acidic eluent conditions were achieved in 25 min.     

Morphology control of soap-free seeded P(St-EA-AA) latex particles

Soap-free poly(styrene-ethyl acrylate-acrylic acid) latex particles with narrow size distribution and with surface carboxyl groups were synthesized by semicontinuous emulsion polymerization, and the particles with homogeneous multihollow structure were obtained after alkali posttreatment. Effects of treatment conditions and crosslinking agents on particle morphology were investigated. Results showed that the multihollow structure can be formed inside the uncrosslinked particles only when the treatment temperature exceeded 50 °C, the pH was higher than 10.0, the amount of 2-butanone was more than 3.0 ml and the treatment time was longer than 30 min. Furthermore, the volume expansion of the particles increased with the temperature increased to 90 °C, the pH to 12.5 or the amount of 2-butanone to 7.0 ml, and this value increased first and then decreased with the treatment time prolonged. Fine pores can be generated in the shell of particles crosslinked by 0.2 g of ethyl glycol dimethylacrylate (EGDMA), while no hollow structure formed inside particles when 0.4 g of EGDMA or 0.2 g of divinyl benzene was used.     

Proton conducting polymer gel electrolytes with NO2 substituted carboxylic acids

Proton conducting polymer gel electrolytes based on different nitro substituted aromatic carboxylic acids have been studied. The conductivity of solution and gel electrolytes containing these acids has been found to depend upon the dissociation/acidity constant value of the acid and varies as  > σ (meta-). The addition of polymethylmethacrylate (PMMA) modifies the conductivity of these gel electrolytes which depends upon the dissociation constant and concentration of the acid present. The rate of change of conductivity of gel electrolytes with gelling polymer (PMMA) has been found to be different in the low and high PMMA regions which has been explained to be due to different mechanisms being responsible for the modification of conductivity in the low and high PMMA regions.     

Engineered bacterially expressed polypeptides: assembly into polymer particles with tailored degradation profiles

In nature, the sequence of amino acids in a protein is determined by the genetic code. Biosynthesis of polypeptides by bacteria can be used to exploit this natural process to afford exact control over properties such as molecular weight, chemical functionality, and structure. It is demonstrated how control over the positioning of functional groups can be used to tune the degradation of assembled polypeptide particles (see scheme).     

An expeditious hydroxyamidation of carboxylic acids

Capitalizing on in situ activation with the cyclic phosphonic anhydride PPAA (1), the conversion of carboxylic acids into hydroxamic acids has been reduced to an experimentally simple one-pot operation that addresses the issue of polyacylation without resorting to a large excess of hydroxylamine or to protection. Scope and selectivity were satisfactory with a wide range of substrates, including α,β-unsaturated acids and hydroxyacids.     

Functional colloidal particles stabilized by layered silicate with hydrophilic face and hydrophobic polymer brushes

In this study, we describe a new strategy for producing narrowly dispersed functional colloidal particles stabilized by a nanocomposite with hydrophilic clay faces and hydrophobic polystyrene (PS) brushes on the edges. This method involves preparation of polymer brushes on the edges of clay layers and Pickering suspension polymerization of styrene in the presence of the nanocomposites. PS brushes on the edges of clay layers were prepared by atom transfer radical polymerization. X‐ray diffraction and thermogravimetric analysis results indicated that PS chains were grafted to the edges of clay platelets. Transmission electron microscope results showed that different morphologies of clay‐PS particles could be obtained in different solvents. In water, clay‐PS particles aggregated together, in which PS chains collapsed forming nanosized hydrophobic domains and hydrophilic clay faces stayed in aqueous phase. In toluene, clay‐PS particles formed face‐to‐face structure. Narrowly dispersed PS colloidal particles stabilized by clay‐PS were prepared by suspension polymerization. Because of the negatively charged clay particles on the surface, the zeta potential of the PS colloidal particles was negative. Positively charged poly(2‐vinyl pyridine) (P2VP) chains were adsorbed to the surface of PS colloidal particles in aqueous solution at a low pH value, and gold nanoparticles were prepared in P2VP brushes. Such colloidal particles may find important applications in a variety of fields including waterborne adhesives, paints, catalysis of chemical reactions, and protein separation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1535–1543, 2009     

Copper-catalyzed synthesis of aromatic carboxylic acids from arylboronic acids and acetyl acetate

A simple and efficient copper-catalyzed method for the synthesis of aromatic carboxylic acids in moderate to high yields with great functional-group compatibility in the substrates has been developed. The new method uses readily available arylboronic acids and acetyl acetate as the starting materials and inexpensive CuI as the catalyst.     

Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

Ion imprinted polymer particles: synthesis, characterization and dysprosium ion uptake properties suitable for analytical applications

Dysprosium(III) ion imprinted polymer particles were prepared by the copolymerization of styrene monomers and a crosslinking agent divinylbenzene in the presence of dysprosium(III)-5,7-dichloroquinoline-8-ol-4-vinyl pyridine ternary complex wherein dysprosium(III) ion is the imprint ion and is used to form the imprinted polymer. The dysprosium(III) ion was removed from polymer particles by leaching with 1:1 HCl which leaves a cavity in the polymer particles. The polymer particles both prior to and after leaching have been characterized by IR, TGA, DTA and XRD studies. The leached particles selectively preconcentrated dysprosium ion from dilute aqueous solutions as determined spectrophotometrically using Arsenazo-I as reagent. The optimum pH value for quantitative enrichment is 6-9 and desorption can be achieved by using 25 ml of 1 mol/l of HCl. The retention capacity of the polymer particles was found to be 40.15 mg/g, which is much higher than MIPs prepared by other imprinting techniques. The dysprosium ion imprinting polymer gave 40 times higher distribution ratio for dysprosium ion compared to blank polymer. More significantly the selectivity coefficients of dysprosium compared to other lanthanides results in enhancement by 60-180-fold. The separation factors with respect to other selected lanthanides were also compared with liquid-liquid extractive separation using di-2-ethylhexyl phosphoric acid (D2EHPA) as extractant. The selectivity of dysprosium ion imprinting polymer (IIP) particles for dysprosium over yttrium is much higher and comparable in case of Nd and Lu when compared to conventional extractant such as D2EHPA in liquid-liquid extraction (LLE). Five replicate determinations of 50 μg of dysprosium present in 250 ml of sample gave a mean absorbance of 0.150 with a relative standard deviation of 2.42%. The detection limit corresponding to three times the standard deviation of the blank was found to be 2 μg/250 ml.     

分子印迹聚合物颗粒在毛细管电色谱中的应用

依据分子印迹技术(MIT)制备的分子印迹聚合物(MIP)颗粒对模板分子及其结构类似物具有特异性识别和选择性吸附作用,同时具有较大的比表面积和快速的传质动力学特性,因而被广泛用作液相色谱固定相和固相萃取材料。将MIP颗粒作为固定相应用于毛细管电色谱(CEC),结合了CEC的快速、高效和MIP的高亲和性、高选择性的特点,成为分析科学领域最具有发展前景的分离技术之一。MIP颗粒在CEC领域有几种不同的应用形式: 作为填充材料填充到毛细管柱中;作为嵌入材料嵌入到毛细管柱内部不同基质的骨架中;作为准固定相添加到CEC运行缓冲溶液中。本文综述了近几年MIP颗粒在CEC领域应用的发展,对该领域今后的发展前景进行了展望。     

Morphology of micron-sized polystyrene particles crosslinked with urethane acrylate

The morphology of micron-sized polystyrene particles crosslinked with a urethane acrylate crosslinker was studied with different concentrations of urethane acrylate and medium solvency by means of simple dispersion polymerization. The urethane acrylate employed as a crosslinker showed an excellent effect on maintaining the monodispersity of the polystyrene particles at a moderate crosslinker concentration (to about 5 wt%) in terms of the monomer-swellable surface of primary particles. By enhancing the medium solvency, the amount of urethane acrylate incorporated was increased, while the monodispersity of the final particles was maintained. It was believed that the increase in solvency on adding xylene to ethanol solution helped the diffusion of the styrene monomers into the primary particles. At high concentration of urethane acrylate, however, nonspherical particles, ellipsoidal or egg-like singlets and asymmetric doublets, were observed. The increased crosslinking density seemed to repel the styrene monomers during particle growth. Received: 30 June 1998 Accepted in revised form: 9 September 1998