Syntheses of trimethoxysilyl‐endcapped polylactones via 3‐mercaptopropyl trimethoxysilane

Monofunctional polylactones were prepared by Bu₂Sn(OMe)₂‐initiated ring‐opening polymerization of ε‐caprolactone (εCL) followed by acylation with bromoacetylbromide. Telechelic polylactones and polylactides were prepared via ring‐expansion polymerization with 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP) or 2,2‐dibutyl‐2‐stanna‐pentaoxacyclotridecane (Bu₂SnTEG) as cyclic initiator. In situ combination of the polymerization with condensation by means of bromoacetylbromide yielded polylactones having bromoacetate endgroups. These endgroups were subjected to nucleophilic substitution with 3‐mercaptopropyl trimethoxysilane (3‐MPTMS). Analogous experiments were conducted with dl‐lactide. The telechelic trimethoxysilyl‐endcapped polylactones were characterized by viscosity, ¹H and ¹³C NMR‐spectroscopy, and MALDI‐TOF mass spectrometry. The mass spectra revealed small amounts of cyclic oligolactones as byproducts in all samples. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3667–3674, 2005     

A Comprehensive Investigation of the Structural,Thermal, and Biological Properties of Fully Randomized Biomedical Polyesters Synthesized with a Nontoxic Bismuth(III) Catalyst

Aliphatic polyesters are the most common type of biodegradable synthetic polymer used in many pharmaceutical applications nowadays. This report describes the ring-opening polymerization (ROP) of l-lactide (L-LA), ε-caprolactone (CL) and glycolide (Gly) in the presence of a simple, inexpensive and convenient PEG200-BiOct₃ catalytic system. The chemical structures of the obtained copolymers were characterized by ¹H- or ¹³C-NMR. GPC was used to estimate the average molecular weight of the resulting polyesters, whereas TGA and DSC were employed to determine the thermal properties of polymeric products. The effects of temperature, reaction time, and catalyst content on the polymerization process were investigated. Importantly, the obtained polyesters were not cyto- or genotoxic, which is significant in terms of the potential for medical applications (e.g., for drug delivery systems). As a result of transesterification, the copolymers obtained had a random distribution of comonomer units along the polymer chain. The thermal analysis indicated an amorphous nature of poly(l-lactide-co-ε-caprolactone) (PLACL) and a low degree of crystallinity of poly(ε-caprolactone-co-glycolide) (PCLGA, X_c = 15.1%), in accordance with the microstructures with random distributions and short sequences of comonomer units (l = 1.02–2.82). Significant differences in reactivity were observed among comonomers, confirming preferential ring opening of L-LA during the copolymerization process.     

New epoxy-terminated oligoesters: Precursors to totally biodegradable networks

Two types of novel biodegradable epoxy resins, carrying cycloaliphatic-epoxy and glycidyl ester end-groups, have been synthesized from hydroxy-telechelic oligoesters. The cycloaliphatic-epoxy end-groups were based on either methyl cis-4-cyclohexene-2-(carboxylic acid)-1-carboxylate or 3-cyclohexene-1-carboxylic acid. These compounds were reacted with hydroxy-telechelic poly(ε-caprolactone-co-D ,L -lactide) oligoesters, yielding cycloaliphatic-olefin-terminated oligomers. Conversion of the olefin to the epoxide groups was achieved using a phase transfer epoxidation with an inorganic peracid derived from the reaction of phosphoric acid, sodium tungstate, and hydrogen peroxide. Aliquat 336, a quaternary ammonium salt, acted as the phase transfer catalyst. Nearly theoretical conversion of hydroxy to epoxy end-groups was achieved in only one case, however, alternative variations of this method of synthesis show promise. To prepare glycidyl ester-terminated prepolymers, hydroxy-telechelic poly(ε-caprolactone) oligoesters were reacted with succinic anhydride, in 1,2-dichloroethane with 1-methylimidazole as catalyst, resulting in (carboxylic acid)-terminated oligomers. After conversion of the end-groups to the potassium carboxylate salt by titration with methanolic KOH, the isolated salt was dried and reacted with epibromohydrin in acetonitrile at reflux, using an 18-C-6 crown ether as the phase transfer catalyst, thus preparing the (glycidyl ester)-telechelic prepolymer. Epoxide equivalent weights differed by 2.7–7.1% from the theoretical values. These cycloaliphatic-epoxide and glycidyl ester-terminated prepolymers may be crosslinked with anhydrides or amines, respectively, to produce totally bioabsorbable networks. © 1993 John Wiley & Sons, Inc.     

Towards Advances in Molecular Understanding of Boric Acid Biocatalyzed Ring-Opening (Co)Polymerization of δ-Valerolactone in the Presence of Ethylene Glycol as an Initiator

Following our previous studies on the molecular level structure of (co)oligoesters obtained via anionic homo- and co-polymerization of novel β-substituted β-lactones, prepared by the atmospheric pressure carbonylation reaction of respective epoxides, the boric acid biocatalyzed ring-opening (co)polymerization of δ-valerolactone has been studied. As a co-monomer the 6-methy-ε-caprolactone, prepared by the one-pot oxidation of respective alcohol, and ethylene glycol as polymerization initiator were used. The obtained copolymers were characterized by ¹H-NMR, GPC and ESI-MS, respectively in order to confirm their chemical structures and identity. Subsequently, tandem mass spectrometry (MS-MS studies) via collision-induced dissociation were utilized to characterize the fragmentation pattern. ESI-MS and NMR analyses confirmed the formation of random linear copolymer chains composed of different polyester repeat units. MS-MS experiments showed that fragmentation proceeds via ester bound cleavage along the (co)polyester chains. The innovative aspect of this contribution is related to the elaboration of the telechelic (co)polymers end-capped with hydroxyl end groups and well-defined molecular architectures, which could facilitate the development of new flexible macromolecular systems for potential biomedical applications.     

Synthesis and characterization of biodegradable block copolymers of ϵ-caprolactone and D,L-lactide initiated by potassium poly(ethylene glycol)ate

Poly(D ,L -lactide)–poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone)–poly(D ,L -lactide) block copolymer (PLA–PCL–PEG–PCL–PLA) was prepared by copolymerization of ϵ-caprolactone (ϵ-CL) and D ,L -lactide (D ,L -LA) initiated by potassium poly(ethylene glycol)ate in THF at 25°C. The copolymers with different composition were synthesized by adjusting the mole ratio of reaction mixture. The resulted copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, DSC, and GPC. Efforts to prepare copolymers with the corresponding structure of PCL–PLA–PEG–PLA–PCL and D ,L -lactide/ϵ-caprolactone random copolymers were not successful. © 1997 John Wiley & Sons, Inc.     

Block–Stereoblock Copolymers of Poly(ϵ‐Caprolactone) and Poly(Lactic Acid)

A magnesium complex of the type {ONNN}Mg‐HMDS wherein {ONNN} is a sequential tetradentate monoanionic ligand is introduced. In the presence of an alcohol initiator this complex catalyzes the living and immortal homopolymerization of the lactide enantiomers and ?‐caprolactone at room‐temperature with exceptionally high activities, as well as the precise block copolymerization of these monomers in a one‐pot synthesis by sequential monomer addition. Copolymers of unprecedented microstructures such as the PCL‐b‐PLLA‐b‐PDLA and PDLA‐b‐PLLA‐b‐PCL‐b‐PLLA‐b‐PDLA block–stereoblock microstructures that feature unique thermal properties are readily accessed.     

A study of phase separation of crystalline and miscible polymer blends. Poly(ε-caprolactone)/poly(styrene-co-acrylonitrile)

The phase separation of a crystalline and miscible polymer blend, poly(ε-caprolactone) /poly(styrene-co-acrylonitrile) (PCL/SAN), has been studied by differential scanning calorimetry (DSC), using a SAN containing 28.3% of acrylonitrile units. Several phenomena can be associated with the occurrence of phase separation depending upon the composition of the mixture. Following annealing at high temperatures, below and above the phase separation temperature T_c, three cases can be distinguished. In Case I, there is no sign of crystallization during quenching and DSC scanning, but a melting peak is observed at T_c, and above. In Case II, there is no crystallization on quenching but it does occur during the DSC run; the shift of the crystallization peak can then be related to T_c. In Case III, there is crystallization on quenching, and additional crystallization during the DSC run; the change of area of the crystallization peak is indicative of T_c. From these observations, the phase diagram of the system was determined. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(ϵ-caprolactone)-poly(ethylene glycol) block copolymer

Poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone) triblock copolymers (PECL) covering a wide range of poly(ethylene glycol) (PEG) lengths were synthesized with alkali metal alkoxide derivatives of poly(ethylene glycol). The effects of various factors, such as amount of the initiator, reaction time and temperature, polarity of solvent, length of PEG segment, and counterion on the polymerization were investigated. The copolymers were characterized by ¹H-NMR, IR, GPC, and DSC. It was found that THF system is superior to toluene system. The conversion of the monomer increased with increase of the initiator concentration. High molecular weight of the copolymer and high conversion of the monomer was obtained at below 30°C within 5 min. The polymerization process was studied by GPC and the coexistence of propagation and transesterification reaction was found, which leaded to relatively broad molecular weight distribution of the copolymers. © 1997 John Wiley & Sons, Inc.     

Intramolecular interactions in poly(styrene-co-acrylonitrile)/poly(ε-caprolactone) blends

Specific interactions in blends of poly(ε-caprolactone) (PCL) and poly(styrene-co-acry-lonitrile) (SAN) were studied as a function of copolymer composition and blend ratio by using Fourier-transform infrared spectroscopy (FTIR). It was shown that miscibility occurred within a certain range of copolymer compositions because the presence of PCL reduced the thermodynamically unfavorable repulsion between styrene and acrylonitrile segments in the random copolymer. This effect was observed in terms of a shift to higher frequencies in the 700 cm^-1 γ-CH out-of-plane deformation vibration absorption of styrene and in the approximately 2236 cm^?1 C?N stretching frequency band in acrylonitrile segments. Specific intermolecular interactions between SAN and PCL were not observed in this study. © 1993 John Wiley & Sons, Inc.     

Preparation and characterization of biodegradable poly(lactic acid)‐ block‐poly(ε‐caprolactone) multiblock copolymer

Biodegradable copolymers of poly(lactic acid)‐block‐poly(ε‐caprolactone) (PLA‐b‐PCL) were successfully prepared by two steps. In the first step, lactic acid monomer is oligomerized to low molecular weight prepolymer and copolymerized with the (ε‐caprolactone) diol to prepolymer, and then the molecular weight is raised by joining prepolymer chains together using 1,6‐hexamethylene diisocyanate (HDI) as the chain extender. The polymer was carefully characterized by using ¹H‐NMR analysis, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR). The results of ¹H‐NMR and TGA indicate PLA‐b‐PCL prepolymer with number average molecular weights (M_n) of 4000–6000 were obtained. When PCL‐diols are 10 wt%, copolymer is better for chain extension reaction to obtain the polymer with high molecular weight. After chain extension, the weight average molecular weight can reach 250,000 g/mol, as determined by GPC, when the molar ratio of –NCO to –OH was 3:1. DSC curve showed that the degree of crystallization of PLA–PCL copolymer was low, even became amorphous after chain extended reaction. The product exhibits superior mechanical properties with elongation at break above 297% that is much higher than that of PLA chain extended products. Copyright © 2009 John Wiley & Sons, Ltd.     

Phosphor(V)-Hydrazin-Schwefel(IV)-Heterocyclen mit Twist-Boot-Konformation

Phosphorus(V)-Hydrazine-Sulfur(IV) Heterocycles with Twist-Boat Conformation . Unlike the corresponding unsubstituted compounds N-ethoxycarbonyl-substituted dihydrazidophosphoric acid derivatives do not react with thionylchloride under redoxdecomposition but yield sulfur containing sixmembered rings. In solution (NMR spectra) as well as in the crystal (X-ray structure analysis) the rings adopt unusual twist-boat conformations. Due to the rather bulky substituents high energies of interconversion between enantiomeric twist-forms are found: 75 ± 2 kJ/mol.     

Poly(α-isobutyl-β-D,L-aspartate)s: Polymerization effects on configuration and crystal structure of the stereocopolymers

Different polymerization methods were used for the preparation of poly(α-isobutyl-β-D ,L -aspartate)s containing variable ratios of D - to L -aspartic units and the microstructure of the resulting stereocopolymers was examined by NMR spectroscopy. Anionic ring-opening polymerization in solution of enantiomeric mixtures of α-isobutyl-β-D - and L -aspartalactams was found to proceed stereoselectively rendering block copolymers composed of right- and left-handed helical sequences. Configurationally statistical copolymers were obtained instead when the enantiomeric lactam mixtures were polymerized in the bulk. Random stereocopolymers could be prepared also by polycondensation in solution of mixtures of pentachlorophenyl α-isobutyl-β-D and -L -aspartates. The conformation in solution and the crystal structure of the resulting copolymers were investigated in connection with their stereochemical configuration and these features compared with those displayed by optically pure poly(α-isobutyl-β-L -aspartate). © 1996 John Wiley & Sons, Inc.     

Hydrolyzable poly(ester-urethane) networks from L-lysine diisocyanate and D,L-lactide/ϵ-caprolactone homo- and copolyester triols

Bioabsorbable poly(ester-urethane) networks were synthesized from ethyl 2,6-diisocyanatohexanoate (L -lysine diisocyanate) (LDI) and a series of polyester triols. LDI was synthesized by refluxing L-lysine monohydrochloride with ethanol to form the ester, which was subsequently refluxed with 1,1,1,3,3,3-hexamethyldisilazane to yield a silazane-protected intermediate. This product was then phosgenated using triphosgene. Polyester triols were synthesized from D,L-lactide, ?-caprolactone, or comonomer mixtures thereof, using glycerol as initiator and stannous octoate as catalyst. Polyurethane networks were cured using [NCO]/[OH] = 1.05 and stannous octoate (0.05 wt %) for 24 h at room temperature and pressure and 24 h at 50°C and 0.1 mm Hg. LDI-based polyurethane networks were totally amorphous and possessed very low sol contents. Networks based on poly (D,L-lactide) triols were rigid (T_g ∽ 60°C) with ultimate tensile strengths of ～ 40–70 MPa, tensile moduli of ～ 1.2–2.0 GPa, and ultimate elongations of ～ 4–10%. Networks based on ?-caprolactone triols were low-modulus elastomers with tensile strengths and moduli of ～ 1–4 MPa and ～ 3–6 GPa, respectively, and ultimate elongations of ～ 50–300%. Networks based on copolymers displayed physical properties consistent with monomer composition and were tougher than the networks based on the homopolymers. Tensile strengths for the copolymers were ～ 3–25 MPa with ultimate elongations up to 600%. Hydrolytic degradation under simulated physiological conditions showed that D ,L -lactide homopolymer networks were the most resistant to degradation, undergoing virtually no change in mass or physical properties for 60 days. ?-Caprolactone-based networks were resistant to degradation for 40 days, and high-lactide copolymer-based networks suffered substantial losses in physical properties after only 3 days. © 1994 John Wiley & Sons, Inc.     

Ring-Opening polymerization of ε-caprolactone by rare earth coordination catalysts. I. Characteristics,kinetics, and mechanism of ε-caprolactone polymerization with nd(acac)3.3H2O-ALET3 system

Ring-opening polymerization of ε-caprolactone has been carried out by using rare earth coordination catalysts for the first time. The rare earth compounds, RE(acac)₃.3H₂O, Nd(P₂₀₄)₃, Nd(P₅₀₇)₃, Nd(naph)₃, Nd(BA)₃.2H₂O, etc. (where RE = La, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Lu, Y; acac = acetylacetone; BA = benzoylacetone), combined with trialkyl aluminum, greatly increased the degree of conversion and the molecular weight of poly(ε-caprolactone) (PCL). The influence of reaction conditions on the polymerization of ε-caprolactone catalyzed by the Nd (acac)₃.3H₂O-AlEt₃ system has been examined in detail. The kinetics indicates that the polymerization rate has the first-order in monomer and a half-order in catalyst. The overall activation energy of the ring-opening polymerization amounts to 59.4 kJ/mol. By IR and UV-Vis spectra, ¹H- and ¹³C-NMR data, it is assumed that the ring-opening polymerization of ε-caprolactone catalyzed by the Nd(acac)₃.3H₂O-AlEt₃ system proceeds via complexation of monomer to catalyst, acyl-oxygen cleavage insertion propagation mechanism. © 1994 John Wiley & Sons, Inc.     

Synthesis of Novel Star Shaped Poly(ε‐caprolactone) Utilizing Fullerene as the Molecular Core

Summary: The synthesis of star shaped poly(ε‐caprolactone) (PCL) with a fullerene molecular core (s‐PCLF) was successfully achieved by the ring‐opening polymerization of ε‐caprolactone with fullerenol as the initiator. Through NMR and GPC analysis, the average number of arms of PCL on each fullerene core was estimated to be 2–3.

Fullerenol (left) and PCL star polymer (right) in THF.     

Polymer-Attached Thiazolium Salts-Catalyzed Addition of Aldehydes to α, β-Unsaturated Carbonyl Compounds

A homogeneous catalyst, 3-benzyl-5-(2-hydroxyethyl)-4-methyl-1,3-thiazolium chloride, for addition of aldehydes to activated double bond, was attached to 20% cross-linked polystyrene-divinylbenzene copolymer. The attached catalysts could be easily removed from the reaction mixture. Polymer-attached thiazolium salts in the presence of triethylamine are active catalysts for addition of aromatic and aliphatic aldehydes to α,β-unsaturated ketones to yield γ-diketones.     

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with ? NCO terminals. Fourier transform infrared (FTIR), ¹³C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between ? NCO groups at the end of the PCL and ? OH (or ? COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (T_g), melting temperature (T_M), crystallizing temperature (T_c), melting enthalpy (ΔH_m), crystallizing enthalpy (ΔH_c), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004