三聚氰胺功能化多孔有机聚合物的合成及其对甲基橙的吸附性能

首先以对三联苯(TP)和对苯二甲酰氯(TC)为单体合成了酮基聚合物前体(TP-TC),而后基于席夫碱反应将三聚氰胺(MA)与之交联得到胺功能化的多孔有机聚合物TP-TC-MA。通过扫描电镜(SEM)、透射电镜(TEM)、傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)、氮气吸附-脱附(BET)以及零电荷点(pH_pzc)的测定等手段对合成的多孔有机聚合物进行表征。以染料废水中典型的阴离子染料甲基橙为研究对象,研究了TP-TC-MA对其吸附行为,并探讨了吸附机制。利用紫外-可见分光光度计(UV-Vis)得出目标污染物的紫外吸收光谱标准曲线,标准曲线拟合相关系数(R²)为0.999。结果表明,TP-TC-MA由于具有高比表面积(708.5 m²/g)和总孔体积(0.556 cm³/g)以及丰富的含氮基团,对阴离子染料甲基橙表现出优异的吸附性能。TP-TC-MA对水中甲基橙的吸附动力学符合准二级动力学方程,吸附平衡数据可以采用Langmuir等温吸附模型描述。经由Langmuir等温吸附模型计算得到的理论最大吸附容量为156.3 mg/g。选择性实验结果表明,TP-TC-MA对阴离子染料甲基橙具有更强的吸附作用,吸附作用机理可归结为静电相互作用、氢键和π-π相互作用等。在重复使用5次之后,TP-TC-MA对甲基橙仍保持90%以上的去除率,表明材料具有良好的稳定性和重复利用性,在染料废水处理中具有很好的应用前景。     

Oxidative coupling of methane in porous Vycor membrane reactors

Porous Vycor membrane tubes were used in shell-and-tube type membrane reactors to study the effect on the oxidative coupling of methane of metering the oxygen into the catalyst bed. Experimental studies showed that under conditions of complete oxygen conversion, Vycor membrane reactors packed with Sm₂O₃ catalyst exhibited enhanced hydrocarbon (C₂) selectivity. C₂ yields were comparable to those of the conventional co-feed packed bed reactors operated under the same conditions. The higher C₂ selectivity in the membrane reactors indicated that, for methane coupling, regulating the supply of oxygen along the length of the packed bed may be beneficial to C₂ formation.     

Copper(II) complexes of imino-bis(methyl phosphonic acid) with some bio-relevant ligands. Equilibrium studies and hydrolysis of glycine methyl ester through complex formation

Binary and ternary complexes of Cu(II) involving imino-bis(methyl phosphonic acid) (IdP) abbreviated as H₄A and some selected bio-ligands, amino acids, peptides and DNA constituents (L), were examined. Cu(II) forms CuA and CuAH complexes with IdP. Ternary complexes are formed in a stepwise mechanism whereby iminodiphosphonic acid binds to Cu(II), followed by coordination of amino acid, peptide or DNA. The concentration distribution of the various complex species has been evaluated. The kinetics of base hydrolysis of glycine methyl ester in the presence of Cu(II)-IdP was studied in aqueous solution at different temperatures, and in dioxane-water solutions of different compositions at 25°C. The activation parameters are evaluated and discussed.     

Gel polymer electrolytes prepared with porous membranes based on an acrylonitrile/methyl methacrylate copolymer

Porous membranes based on acrylonitrile/methyl methacrylate copolymer were prepared by a phase‐inversion method. Microstructures of the porous membranes were controlled through the variation of the evaporation drying time before immersion in a nonsolvent bath. Gel polymer electrolytes were prepared from these porous membranes via soaking in an organic electrolyte solution. They encapsulated the electrolyte solution well without solvent leakage and maintained good mechanical properties that allowed the preparation of thin films (～23 μm). These systems showed acceptable ionic conductivity values (>6.0 × 10^?4 S/cm) at room temperature and sufficient electrochemical stability over 4.4 V that allowed applications in lithium‐ion polymer batteries. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1496–1502, 2002     

聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能

溶胶-凝胶;聚硅酸;聚甲基丙烯酸甲酯/二氧化硅杂化材料制备与性能     

Fracture and crack profile fictitious crack modeling of porous poly(methyl methacrylate)

This article presents the fracture behavior and applicability of the fictitious crack (FC) model to describe the fracture of a porous poly(methyl methacrylate) material. Two test geometries, wedge‐opening load and single‐edge‐notched beam, were employed under two different test conditions (room temperature and in water at 45 °C); all presented quasibrittle fracture behavior. The crack profile of a wedge‐opening load sample was visualized and measured with the digital image correlation technique. The mechanical response of all the samples, including the crack profile, was successfully modeled with the FC model, and this showed the good applicability of this model to the fracture of this granular poly(methyl methacrylate) material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1112–1122, 2003     

Shock tube ignition delay time measurements for methyl propanoate and methyl acrylate: Influence of saturation on small methyl ester high-temperature reactivity

We report ignition delay time measurements for methyl propanoate (MP) and methyl acrylate (MA), carried out in a high-pressure shock tube. Experiments were performed behind reflected shock waves across a temperature range of 989-1 367 K, for fuel-air mixtures at equivalence ratios of ϕ = 0.5, 1.0, and 2.0, and nominal pressures of 1 and 4 MPa. Ignition delay times were found to decrease with increasing temperature, equivalence ratio, and pressure, and are well described with correlations involving Arrhenius temperature dependence and power-law dependence on equivalence ratio and pressure. Ignition delay times are compared with model predictions from literature kinetic models, with the models of Zhang et al (Energy & Fuels 2014; 28(11): 7194-7202) and Bennadji et al (International Journal of Chemical Kinetics 2011; 43(4): 204-218.) in good agreement with measured ignition delay times for MP and MA, respectively. Kinetic sensitivity analysis shows that the reactions most important for modeling ignition fall into two categories: initiation reactions (ie, decomposition and H-atom abstraction) and C₀-C₁ chemistry controlling the pool of small radicals. The unsaturated MA was observed to have lower reactivity than MP, due to its greater bond strengths for C─C and C─H bonds, resulting in slower rates for initiation reactions.     

甲基葡萄糖苷硬脂酸酯及其聚氧丙烯醚的合成

以α-甲基葡萄糖苷和硬脂酸甲酯为原料,在碱性催化剂K2CO3和相转移催化剂四丁基氯化铵(TBAC)共同作用下,无溶剂法合成了甲基葡萄糖苷硬脂酸酯(SS),再与环氧丙烷反应,合成了甲基葡萄糖苷硬脂酸酯聚氧丙烯醚(SSP),并对产品进行了IR表征.探讨了相转移催化酯交换反应机理.研究了原料配比、催化剂种类及用量、反应温度、反应时间等因素对SS收率的影响,得到了合成SS的适宜工艺条件:n(甲基葡萄糖苷)∶ n(硬脂酸甲酯)=0.71∶ 1,w(K2CO3)∶ w(硬脂酸酸甲酯)=0.04∶ 1,w(TBAC)∶ w(硬脂酸甲酯)=0.05∶ 1,反应温度145℃,时间4.5h,压力6kPa.上述条件下,SS收率可达92%,产品质量较好.     

Heat capacity of water in poly(methyl methacrylate) hydrogel membrane for an artificial kidney

The heat capacities of a poly(methyl methacrylate) hydrogel membrane for an artificial kidney have been determined over the range of temperatures from 228 to 298 K as a function of water content. At least two kinds of water were found: freezable water and nonfreezable water. The partial specific heat capacities of both waters were calculated from the dependence of heat capacity of the hydrogel on the water content. The heat capacities of freezable water were estimated to be 1.04 cal g⁻¹ K⁻¹ at 298 K and 0.47 cal g⁻¹ K⁻¹ at 228 K. The mobility must therefore be similar to that of bulk water at 298 K, though the melting temperature was lower than that of bulk water. Consequently, the freezable water was not assigned to bound water but to pore water for which the melting temperature was depressed due to interfacial tension. On the other hand, the heat capacities of nonfreezable water were estimated to be 1.02 cal g⁻¹ K⁻¹ at 298 K and 1.06 cal g⁻¹ K⁻¹ at 228 K. The mobility of the water would be similar to that of free water at both 298 and 228 K. © 1995 John Wiley & Sons, Inc.     

A reservoir-type controlled release device using aqueous-organic partitioning and a porous membrane

A reservoir-type controlled release device based on aqueous-organic partitioning is described. The reservoir is bounded by a microporous or porous membrane, either a hollow fiber or a flat film. The agent partitions between phases at the aqueous-organic interface of the reservoir and the pore mouth, and then diffuses through the membrane pore into a surrounding aqueous solution. The partition coefficient significantly influences the rate of release of the agent. The performance of the system is evaluated using model agents. Controlled release from a reservoir containing a pure organic liquid agent is demonstrated using toluene. Zero-order release is achieved for benzoic acid partitioning from an organic reservoir into water-filled pores, and for nicotine partitioning from an aqueous reservoir into organic-filled pores. Studies using benzoic acid demonstrate the effectiveness of a thin, nonporous coating on slowing the rate of release. A fast-dissolving suspension of benzoic acid in decanol extends the duration of zero-order release. Two agents, nicotine and caffeine, are released simultaneously and independently from a divided reservoir. A simplified mathematical model is presented, and experimental results compared well with those predicted by the model.     

Evaluation of porous graphitic carbon as stationary phase for the analysis of fatty acid methyl esters by liquid chromatography

Summary Polyunsaturated fatty acids have been analysed as methyl esters by liquid chromatography on porous graphitic carbon and the results compared with those obtained on octadecyl bonded phases. Chromatographic behaviour on octadecyl bonded phases arises principally as a result of hydrophobic interactions with the bonded phase. Because the retention of analytes is greater on porous graphitic carbon than on octadecyl phases, organic mobile phases are required. When the number of double bonds is low (ca 1–3), the behaviour of porous graphitic carbon is similar to that of octadecyl bonded phases, but when this number increases stronger interactions with the flat surface of the graphite appear, resulting in new selectivity. These two ‘reversed-phase’ systems are considered complementary for separation of different fatty acid methyl esters. An additional advantage of porous graphitic carbon is that it enables isolation of hexadecartrienoic and hexadecadienoic acids, which are not available commercially.     

Poly(acrylonitrile‐co‐methyl methacrylate‐co‐methyl acrylate): Synthesis and stereosequence distribution analysis by 2D NMR

Terpolymers of acrylonitrile (A), methyl methacrylate (B), and methyl acrylate (M) were synthesized under optimized atom transfer radical polymerization conditions using 2‐bromopropionitrile as an initiator and CuBr/dinonyl bipyridine as a catalyst. Variation of the feed composition led to terpolymers with different compositions. Composition of synthesized terpolymers were calculated from quantitative ¹³C{¹H} NMR spectra. Number average molecular weight and polydispersity index were determined by gel permeation chromatography. The overlapping and broad signals of the terpolymers were assigned completely to various compositional and configurational sequences by correlation of one‐dimensional ¹H, ¹³C{¹H}, and distortionless enhancement by polarization transfer and two‐dimensional heteronuclear single quantum coherence (HSQC) and total correlation spectroscopy (TOCSY). 2D HSQC NMR study shows one to one correlation between carbon and proton signals, while 2D TOCSY spectra were used to confirm 1, 2 bond geminal couplings between nonequivalent protons of same methylene group. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 25–37, 2009     

Synthesis of a heterodinuclear ruthenium(II)–platinum(II) complex linked by l-cysteine methyl ester

A potential anticancer heterodinuclear ruthenium(II)–platinum(II) complex, [ruthenium(II)(4,4′-dimethyl-2,2′-bipyridine)₂(5-(l-cysteine-methyl ester)-1,10-phenanthroline)-trans-chlorodiammineplatinum(II)] chloride, [Ru(Me₂bipy)₂(5-(l-cysteine-Me)-phen)-trans-Pt(NH₃)₂Cl]Cl₃, was synthesised. l-Cysteine methyl ester was used to link the two metal centres, as more conventional straight chain diaminoalkanes and 2-mercaptoethylamine failed to couple to the phenanthroline ligand. From the precursor mononuclear ruthenium(II) complexes, which were separated into their Δ- and Λ-isomers by column chromatography, the dinuclear complex was synthesised and characterised by ¹H and ¹³C NMR, UV–Vis, circular dichroism, fluorescence and electrospray ionisation mass spectrometry.     

Equilibrium investigation of complex formation reactions involving copper(II), nitrilo-tris(methyl phosphonic acid) and amino acids,peptides or DNA constitutents. The kinetics,mechanism and correlation of rates with complex stability for metal ion promoted hydrolysis of glycine methyl ester

The complex formation reactions of [Cu(NTP)(OH₂)]^4? (NTP?=?nitrilo-tris(methyl phosphonic acid)) with some selected bio-relevant ligands containing different functional groups, are investigated. Stoichiometry and stability constants for the complexes formed are reported. The results show that the ternary complexes are formed in a stepwise mechanism whereby NTP binds to copper(II), followed by coordination of amino acid, peptide or DNA. Copper(II) is found to form Cu(NTP)H _n species with n?=?0, 1, 2 or 3. The concentration distribution of the various complex species has been evaluated. The kinetics of base hydrolysis of glycine methyl ester in the presence of copper(II)-NTP complex is studied in aqueous solution at different temperatures. It is proposed that the catalysis of GlyOMe ester occurs by attack of OH^? ion on the uncoordinated carbonyl carbon atom of the ester group. Activation parameters for the base hydrolysis of the complex [Cu(NTP)NH₂CH₂CO₂Me]^4? are, ΔH^±?=?9.5?±?0.3?kJ?mol^?1 and ΔS^±?=??179.3?±?0.9?J?K^?1?mol^?1. These show that catalysis is due to a substantial lowering of ΔH^±.     

Dependence of the glass transition temperature of poly (methyl methacrylates) on their tacticity

The specific isobaric heat capacities of poly (methylmethacrylates) (PMMA) having various tacticities were measured by the DSC method within a broad range of temperatures including the glass transition. Glasses with uniform thermal history were used in the measurements and the data were treated by employing a procedure which provided the thermodynamic T_g independent of the experimental conditions. The semiquantitative validity of Boyer's empirical relationT _g ×c_p=const. was confirmed; also it was found that within the limits of experimental accuracy the c_p,g values at 298 K andC _p,l values at 400 K are independent of the tacticity of the sample.Using the data thus measured and linearized equations representing the dependence ofT _g on the content of iso-, syndio- and heterotriads, the T_g values of pure isotactic PMMA and pure syndiotactic PMMA were found to be respectively 315 K and 397 K.Dedicated to Professor Dr. F. H. Müller.     

Preparation of water and alkali durable porous glass membrane coated on porous alumina tubing by sol-gel method

Composite porous glass membranes were prepared by the sol-gel method. A thin porous glass layer, about 2 μm thick, was coated on the surface of the porous ceramic tubing (Al₂O₃:99.9 wt.%, pore diameter: 200 nm). The composition of the porous glass layer of the composite membrane was SiO₂-ZrO₂. Considering from the fact that the desalination ratio of the feed aqueous NaCl solution (NaCl 0.5 wt.%) was about 90% by use of these membranes, they were defect-free. The best composition of the porous glass layer was 70 SiO₂-30 ZrO₂ from the standpoint of preparing membranes. These membranes had a large water and alkali durability. These membranes can be expected to apply to recovering dyes and paints from organic solvents and to be used as a gas separation membrane.     

Round‐robin experiment in high‐temperature gel permeation chromatography

The results of an interlaboratory or round‐robin experiment in high‐temperature gel permeation chromatography (HT‐GPC) analysis are presented. The intention was to determine and raise awareness of interlaboratory reproducibility of HT‐GPC techniques. Fifteen laboratories performed analyses of five polyethylene samples and standards SRM 1475 and 1476. Reproducibility, as measured by the interlaboratory standard deviation (s_LAB), was greatly influenced by the breadth of the molecular weight distribution (MWD) and branching. The s_LAB values for the weight‐average molecular weight (M_w) of linear polyethylenes of narrow and broad MWDs were 4 and 14%, respectively. For branched polymers, GPC viscometry methods are shown to measure significantly higher molecular weights than the noncoupled GPC method, with higher variance. For branched polyethylenes measured with GPC viscometry, the reproducibility of M_w was characterized by s_LAB = 18%. Reproducibility of the SRM 1475 standard was better than for unknowns. The results for branched standard SRM 1476 emphasize the important role of the detection method in GPC but call into question the use of this material as a molecular weight standard. For single‐site polyethylene, only a handful of labs measured an MWD that closely matched the Flory distribution. Qualitatively, the responses indicate that many variations in instrument and analytical methods exist among laboratories; this is partly a reflection of the development and refinements that this technique must yet undergo before a truly standard method is widely accepted and practiced. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 905–921, 2002     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

Effect of crosslinking on porous poly(methyl methacrylate) produced by phase separation

Porous polymethyl methacrylate scaffolds were produced by phase separation during polymerisation in solution, using ethanol as solvent, with monomer/ethanol weight ratios from 80/20 up to 20/80 and different ethylenglycol dimethacrylate contents (1, 5 and 10 wt%) as crosslinker agent. For ethanol weight ratios equal to or lower than 50 wt%, the material presents a homogeneous distribution of dispersed pores. For higher ethanol contents, a highly interconnected porous structure is obtained. The transition from one type of morphology to the other can be also controlled with the amount of crosslinker added in the reactive mixture. Bulk polymethyl methacrylate samples (non-porous) with the same crosslinking densities were also synthesised as reference. The effect of crosslinker is studied by porosity measurements, scanning electron microscopy, dynamic-mechanical spectroscopy and differential scanning calorimetry.