Synthesis and Ni(0)-catalyzed oligomerization of isomeric 4,4‴-dichloroquaterphenyls

4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ), 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ), and 4,4?-dichloro-1,1′ : 4′,1″ : 4″,1?-quaterphenyl ( 11 ) were synthesized by Pd (0) catalyzed cross-coupling reaction of 4-chlorobenzeneboronic acid with 2,2′-, 3,3′-, and 4,4′-bis (trifluoromethanesulfonyloxy)biphenyl respectively. 4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ) and 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ) were oligomerized by Ni(0) catalyzed homocoupling reaction to yield white and soluble oligophenylenes. © 1993 John Wiley & Sons, Inc.     

Dimethyl sulfoxide-aided copper(0)-catalyzed intramolecular decarbonylative rearrangement of N-aryl isatins leading to acridones

Described here is the first example of Cu(0)-catalyzed intramolecular decarbonylative rearrangements of readily available N-aryl isatins assisted by solvent dimethyl sulfoxide(DMSO) under air atmosphere and additive-free conditions leading to various biologically important acridones in good to excellent yields.This novel transformation is proposed to go through a sequential DMSO-aided Cu insertion into the amide C-N bond,CO extrusion,Cu migration,reductive elimination and DMSO-aided proton migration processes,involving multiple types of bond cleavage and formation in a single chemical step.     

Effect of miscible polymer diluents on the development of lamellar morphology in poly(oxymethylene) blends

The development of lamellar morphology in poly(oxymethylene) (POM) and its miscible blends was studied by synchrotron time-resolved small-angle X-ray scattering (SAXS), during primary and secondary crystallization at temperatures near 150°C. The blends contained two different diluents: poly(vinyl 4-hydroxy styrene) [common name poly(vinyl phenol), (PVP)], which had a high glass temperature (T_g = 150°C), and styrene-co-hydroxy styrene oligomer (PhSO), which had a low glass temperature (T_g = −37°C). The SAXS data were analyzed by correlation function analysis to extract several lamellar parameters: long period (L), lamellar crystalline thickness (lc), amorphous layer thickness (la), and invariant (Q). The variation in Q defined the region where spherulites quickly grew and filled the entire space, and was referred to as the primary crystallization dominant regime. A rapid drop in L and lc was observed at early times, and this can be explained by defective lamellar stacks filling in space between primary stacks, as secondary crystals form during the nominal primary crystallization dominant regime. Lamellar thickening with time in the long-time secondary crystallization region was observed in neat POM and the blend with 10 % low T_g diluent, while this process was inhibited with the high T_g diluent due to the higher T_g of the interlamellar species. A decrease in la at long times confirmed the lamellar thickening. We refer to the lamellar thickening process as a type of secondary crystallization. Interlamellar inclusion or trapping was detected to different degrees with the high T_g diluent, while exclusion was found for the low T_g diluent. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3115–3122, 1999     

Synthesis,characterization, and blends of high temperature poly(arylether sulfone)s

The preparation of poly(4-oxy-1,4-phenylenesulfonyl-4,4′-biphenylene-4-sulfonylphenylene) (PBP) has been accomplished by the base mediated, polycondensation reaction between two biphenyl containing monomers. The bisphenol, 4,4′-bis[(4-hydroxyphenyl) sulfonyl]biphenyl (HSB), was reacted with 4,4′-bis[(4-chlorophenyl)sulfonyl]-biphenyl (CSB) in tetramethylene sulfone solvent. The highest mechanical properties and glass transition temperature was observed for polymer PBP with a reduced viscosity around 1.0 dL/g. Consequently, the current synthesis route provides polymer with higher properties than other historical preparative routes. Blends of PBP with a different poly(ether sulfone) were miscible based on the observance of a single glass transition temperature. The T_gs of the polymer blends exhibited an unusual positive deviation from the weighted linear averages of the components.     

Synthesis of novel poly(hydroxyether terephthalate) via polyaddition of 2,5-difluoroterephthalic acid with aromatic bis(epoxide)s

A novel and more reliable synthetic route to 2,5-difluoroterephthalic acid was developed. A series of new poly(hydroxyether terephthalate) were prepared by the polyaddition of 2,5-difluoroterephthalic acid with various aromatic bis(epoxide)s catalyzed by tetrabutyl ammonium bromide.     

A study of phase separation of crystalline and miscible polymer blends. Poly(ε-caprolactone)/poly(styrene-co-acrylonitrile)

The phase separation of a crystalline and miscible polymer blend, poly(ε-caprolactone) /poly(styrene-co-acrylonitrile) (PCL/SAN), has been studied by differential scanning calorimetry (DSC), using a SAN containing 28.3% of acrylonitrile units. Several phenomena can be associated with the occurrence of phase separation depending upon the composition of the mixture. Following annealing at high temperatures, below and above the phase separation temperature T_c, three cases can be distinguished. In Case I, there is no sign of crystallization during quenching and DSC scanning, but a melting peak is observed at T_c, and above. In Case II, there is no crystallization on quenching but it does occur during the DSC run; the shift of the crystallization peak can then be related to T_c. In Case III, there is crystallization on quenching, and additional crystallization during the DSC run; the change of area of the crystallization peak is indicative of T_c. From these observations, the phase diagram of the system was determined. © 1993 John Wiley & Sons, Inc.     

Synthesis of tert-butyl-substituted poly (ether ketone) by nickel-catalyzed coupling polymerization of aromatic dichloride

tert-Butyl substituted poly (aryl ether ketone)s with relatively high molecular weights were prepared by the Ni-catalyzed polymerization of tert-butyl substituted aromatic dichlorides containing ether ketone unit. These polymers were amorphous and soluble in common organic solvents, such as THF, dichloromethane, and chloroform. De-tert-butylation of the polymer by the treatment of trifluoromethanesulfonic acid in the presence of toluene proceeded smoothly and produced crystalline poly (aryl ether ketone). © 1994 John Wiley & Sons, Inc.     

Poly(silylenemethylene)‐based polymer blends. III. Synthesis and properties of polymer blends containing siloxane‐crosslinked poly(silylenemethylene)s

Soft–hard binary polymer blends consisting of amorphous poly(silylene methylene)s (PSMs) and crystalline poly(diphenylsilylenemethylene) were prepared by both melt processing at 360 °C and in situ polymerization at 300 °C. Linear and siloxane‐crosslinked PSMs were used as amorphous components for the purpose of determining how the crosslinks affected the interactions between the component polymers. Differential scanning calorimetry and dynamic mechanical analysis indirectly suggested that discernable differences between the blends containing linear and crosslinked PSMs were attributable to the degree of interactions between the amorphous and crystalline components. The morphological differences between these blends were studied with transmission electron microscopy. The dispersion phase was smaller in the blends containing crosslinked PSM than that in the blends containing linear PSM. This directly indicated that a larger interaction between the amorphous and crystalline phases was obtained by the introduction of crosslinks because of the smaller viscosity difference between the phases and a larger degree of polymer chain entanglement. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 257–263, 2003     

Thermal and photochemical stability of poly(methyl methacrylate) and its blends with poly(vinyl acetate)

An investigation of the thermal stability of poly(methyl methacrylate) (PMMA) blends with poly(vinyl acetate) (PVAc) revealed that PVAc acts as a stabilizer as concerns thermal and photochemical degradation when the processes take place in air. The temperatures of decomposition of these blends are higher than that of pure PMMA. The efficiency of photodegradation and photooxidation in the blends is lower than that of pure PMMA.     

Oxaaza macrocycles constructed on poly(ethylenimine) through Ni(II)-template cyclization and their metal binding

Polymeric oxaaza macrocycles (PEI-OAM) are constructed on poly(ethylenimine) (PEI) by Ni(II)-template alkylation of PEI with diethyleneglycol ditosylate. The K_f values for Ni(II), Cu(II), and Zn(II) complexes of PEI–OAM are measured at pH 3.5–10 at 25°C. At pH 7, log K_f values for these complexes are 9–15, indicating that the polymeric oxaaza macrocycles can readily reduce concentrations of these metal ions below ppb level. Metal binding ability of nonpolymeric oxaaza macrocyclic compounds reported in the literature decreases rapidly as pH is lowered below 7, whereas that of PEI–OAM decreases to lesser extents. This is attributed to the electrostatic effects exerted by the ammonium ions of PEI backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 527–532, 1997.     

Application of Walphos Ligand in the Pd(0)-Catalyzed Asymmetric Allylic Alkylation Reaction

One relatively unexploited commercial ligand, Walphos 1, was tested in the Pd(0)-catalyzed asymmetric allylic alkylation using rac-1,3-diphenyl propenyl acetate and rac-1-acetoxycyclohexene as substrates, methyl malonate as nucleophile, and a variety of Pd precatalysts under standard conditions. The conversions and enantioselectivities were generally good, with the greatest substrate conversion of 99% and a greatest ee of 70%. With the latter cyclic substrate, an enantioselectivity of 98% was obtained, but the conversions were all poor (15–33%).     

New poly(amide-imide)s syntheses. I. Soluble high-temperature poly(amide-imide)s derived from 2,5-bis(4-trimellitimidophenyl)-3,4-diphenylthiophene and various aromatic diamines

Novel aromatic poly(amide-imide)s with high inherent viscosities were prepared by direct polycondensation reaction of 2,5-bis(4-trimellitimidophenyl)-3,4-diphenylthiophene ( IV ) and aromatic diamines using triphenyl phosphite in the N-methyl–2-pyrrolidone (NMP)/pyridine solution containing dissolved CaCl₂. The diimide-diacid IV was readily obtained by the condensation reaction of 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene ( III ₁) with trimellitic anhydride. The obtained poly(amide-imide)s showed high thermostability. Their decomposition temperatures at 10% weight loss in nitrogen atmospheres were above 550°C and the anaerobic char yield at 800°C ranged from 48 to 68%. Almost all the poly(amide-imide)s showed high glass transition temperatures above 300°C by differential scanning calorimetry (DSC) measurements. These polymers were readily soluble in various organic solvents and could be cast into transparent, tough, and flexible films. Their casting films showed obvious yield points in the stress-strain curves and had strength at break up to 74.2 MPa, elongation to break up to 70.1%, and initial modulus up to 4.56 GPa. The factors affecting the reaction of diimide-diacid IV and 4,4′-oxydianiline in view of monomer concentration, reaction temperature, and amount of CaCl₂ were also investigated. © 1992 John Wiley & Sons, Inc.     

Copper(I)-catalyzed synthesis of 3,3-disubstituted isoindolin-1-ones from enamides via cascade radical addition and cyclization

Copper(I) catalyzed radical benzylation and cyclization reaction of tertiary enamides was investigated and 3,3-disubstituted N-Alkyl isoindolin-1-ones were obtained in moderate to good yields. In this reaction, two new C–C bonds were formed in one step with high atom economy. Possible reaction pathway for the formation of the products was also discussed in this paper.     

Effect of poly(butylene succinate) on the morphology evolution of poly(vinylidene fluoride) in their blends

The effect of PBS on the morphological features of PVDF has been investigated by optical and atomic force microscopies under various conditions.It was found that neat PVDF forms largeγform spherulites with extraordinarily weak birefringence at 170℃.Adding 30%PBS makes PVDF exhibit intrigued flower-like spherulitic morphology.The growth mechanism was explained by the decrease of the supercooling and the materials dissipation.Increasing the PBS content to 70%favors the formation of ring banded spherulites.Temperature dependent experiments verify theα→γphase transition occurs from the junction sites of theαandγcrystals,while starts from the centers ofαspherulites in the blends.Ring banded structures could be observed in neat PVDF,70/30 blend and 30/70 blend when crystallized at 155℃,withoutγcrystals.The band period of PVDFαspherulites increases with crystallization temperature as well as the amount of PBS content.At 140℃,spherulites in neat PVDF lose their ring banded feature,while coarse spherulites consisting of evident lamellar bundles could be found in 30/70 blend.     

Reaction-induced miscibility in blends comprised of bisphenol-A polycarbonate and poly(trimethylene terephthalate)

The inherent miscibility and effects of reaction-induced changes on the phase behaviour of blends of poly(trimethylene terephthalate) (PTT) with bisphenol-A polycarbonate (PC) were studied. The as-prepared (solution-cast) blends exhibited two well-spaced and separated glass transition temperatures (T_gs) and a heterogeneous phase-separated morphology, indicating an immiscible system. However, after annealing at high temperature (at 260 °C), the blends original two T_gs merged into one single T_g, and the annealed blends exhibited a homogeneous morphology, and turned from having a semicrystalline into having an amorphous nature upon extended annealing. The annealing-induced changes of phase behaviour in the blends were analyzed. The homogenization process of the blends upon heating is attributed to chemical transreactions between the PTT and PC chain segments, as evidenced with FT-IR characterization. The IR result showed a new aryl C-O vibration peak at 1,070 cm^–1 for the annealed blends, which is characteristic of an aromatic polyester structure formed from exchange reactions between PTT and PC. The transreactions between PTT and PC led to a random copolymer comprised of PC/PTT segments, which is believed to serve as a compatibilizer at the beginning stage of transreactions, but at later stage, the random copolymer became the main species of blends and turned to a homogeneous and amorphous phase.     

Construction of indoloquinolinones via Pd(II)-catalyzed tandem CC/CN bond formation: application to the total synthesis of isocryptolepine

Construction of indoloquinolinone skeleton via Pd-catalyzed tandem CC/CN bond formation has been achieved in moderate to good yields. The method was applied toward the total synthesis of the bioactive natural product isocryptolepine in good overall yields.     

Synthesis and properties of aromatic poly (ether sulfone)s and poly (ether ketone)s based on methyl-substituted biphenyl-4,4′-diols

Novel methyl-substituted aromatic poly (ether sulfone)s and poly (ether ketone)s were synthesized from combinations of 3,3′,5,5′-tetramethylbipheny-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol, and 4,4′-dichlorodiphenyl sulfone and 4,4′-difluorobenzo-phenone by nucleophilic aromatic substitution polycondensation. The polycondensations proceeded quantitatively in a N-methyl-2-pyrrolidone-toluene solvent system in the presence of anhydrous potassium carbonate to afford the polymers with inherent viscosities between 0.86 and 1.55 dL/g. The methyl-substituted poly (ether sulfone)s and poly (ether ketone)s showed good solubility in common organic solvents such as chloroform, tetrahydrofuran, pyridine, m-cresol, and N,N-dimethylacetamide. The tetramethyl- and hexamethyl-substituted aromatic polyethers had higher glass transition temperatures than the corresponding unsubstituted polymers, and did not decompose below 350°C in both air and nitrogen atmospheres. The films of the methyl-substituted poly (ether ketone)s became insoluble in chloroform by the irradiation of ultraviolet light, indicating the occurrence of photochemical crosslinking reactions. © 1994 John Wiley & Sons, Inc.     

Heat of mixing in polymer blends based on poly(vinyl acetate)

Knowledge of the heat of mixing is very important in order to evaluate the interaction parameter, according to the Patterson theory. In this work we illustrate the results regarding some polymer blends, based on poly(vinyl acetate) and some polyacrylates with different substituent groups. In this way it is possible to understand the effect of the lateral group hindrance, as it will be illustrated in the paper.