Preparation and properties of polyesters from diphenylmethane-4,4′-di(methylthiopropionic acid) and aliphatic diols

The new linear polyesters containing sulfur in the main chain were obtained by melt polycondensation of diphenylmethane-4,4′-di(methylthiopropionic acid) with ethanediol, 1,3-propanediol, 1,4-butanediol, 1,5-pentanediol, 1,6-hexanediol, 1,2-propanediol, 1,3-butanediol, and 2,2′-oxydiethanol. Low-molecular weights, low-softening temperatures and, very good solubility in organic solvents are their characteristics. The structure of all polyesters was determined by elemental analysis, FT-IR and ¹H-NMR spectroscopy, and x-ray diffraction analysis. The thermal behavior of these polymers was examined by differential thermal analysis (DTA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The kinetics of polyesters formation by uncatalyzed melt polycondensation was studied in a model system: diphenylmethane-4,4′-di(methylthiopropionic acid) and 1,4-butanediol or 2,2′-oxydiethanol at 150, 160, and 170°C. Reaction rate constants (k₃) and activation parameters (ΔG^≠, ΔH^≠, ΔS^≠) from carboxyl group loss were determined using classical kinetic methods. © 1997 John Wiley & Sons, Inc.     

Polyesters containing sulfur. VIII. New benzophenone‐derivative thiopolyesterdiols synthesis and characterization. Their use for thermoplastic polyurethanes preparation

The new linear thiopolyesterdiols (PEs) containing sulfur in the main chain were synthesized by melt polycondensation of newly obtained benzophenone‐4,4′‐bis(methylthioacetic acid) with excess of 1,4‐butanediol, 1,5‐pentanediol, and 1,6‐hexanediol. All these PEs (M _n of 2000–2600) were converted to thiopoly(ester‐urethane)s (PEUs) by polyaddition reaction with hexamethylene diisocyanate or 4,4′‐diphenylmethane diisocyanate, which was carried out in melt at the ratio of NCO/OH = 1. The resulting thermoplastic PEUs were amorphous and elastomeric, with elongation at break ranging from 630 to 1200%. The polymers were characterized by Fourier transform infrared, ¹H NMR, thermogravimetric analysis, differential scanning calorimetry, and in the case of PEUs, Shore A/D hardness and tensile properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3977–3983, 2000     

Polyesters containing sulfur. VII. New aliphatic‐aromatic polyesters for synthesis of polyester‐sulfur compositions and polyurethanes

New linear polyesters containing sulfur in the main chain were obtained by melt polycondensation of diphenylmethane‐4,4′‐bis(methylthioacetic acid) (DBMTAA) or diphenylmethane‐4,4′‐bis(methythiopropionic acid) (DBMTPA) and diphenylmethane‐4,4′‐bis(methylthioethanol) (DBMTE) at equimolar ratio of reagents (polyesters E‐A and E‐P) as well as at 0.15 molar excess of diol (polyesters E‐A_OH and E‐P_OH). The kinetics of these reactions was studied at 150, 160, and 170°C. Reaction rate constants (k₂) and activation parameters (ΔG^≠, ΔH^≠, ΔS^≠) from carboxyl group loss were determined using classical kinetic methods. E‐A and E‐P (M̄_n = 4400, 4600) were used for synthesis of new rubber‐like polyester‐sulfur compositions, by heating with elemental sulfur, whereas oligoesterols E‐A_OH and E‐P_OH (M̄_n = 2500, 2900) were converted to thermoplastic polyurethane elastomers by reaction with hexamethylene diisocyanate (HDI) or methylene bis(4‐phenyl isocyanate) (MDI). The structure of the polymers was determined by elemental analysis, FT‐IR and liquid or solid‐state ¹H‐, ¹³C‐NMR spectroscopy, and X‐ray diffraction analysis. Thermal properties were measured by DTA, TGA, and DSC. Hardness and tensile properties of polyurethanes and polyester‐sulfur compositions were also determined. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 835–848, 1999     

Antimicrobial Hydantoin‐Containing Polyesters

A new N‐hydantoin‐containing biocompatible and enzymatically degradable polyester with antibacterial properties is presented. Different polyesters of dimethyl succinate, 1,4‐butanediol, and 3‐[N,N‐di(β‐hydroxyethyl)aminoethyl]‐5,5‐dimethylhydantoin in varying molar ratios are prepared via two‐step melt polycondensation. The antibacterially active N‐halamine form is obtained by subsequent chlorination of the polyesters with sodium hypochlorite. Chemical structures, thermal properties, and spherulitic morphologies of the copolymers are studied adopting FT‐IR, NMR, TGA, DSC, WAXD, and POM. The polyesters exhibit antibacterial activity against Escherichia coli. The adopted synthetic approach can be transferred to other polyesters in a straightforward manner.

     

Synthesis and characterization of 1,3-bis(2-hydroxyethoxy) benzene based saturated and unsaturated polyesters

Polyesterification of adipic acid and maleic anhydride with 1,3-bis(2-hydroxyethoxy)benzene (HER) in the presence of toluene-4-sulphonic acid was carried out using melt condensation technique. The structural characterization of the synthesized polyesters had been carried out using Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopic methods. The thermal properties of the polyesters were studied using differential thermal analysis (DTA) and thermogravimetric analysis (TGA). The activation energies for the thermal degradation of the polyesters were calculated by the method of Dharwadkar and Kharkhanavala and discussed. The char residue value at 600 °C indicated maleic anhydride based polyester is thermally more stable compared to the adipic acid based polyester. The mechanism of degradation of these polyesters is discussed.     

Phosphorus-containing polyurethanes and copolyurethanes based on 1,2-dihydroxy-1,2-bis(diethoxyphosphinyl)ethane

The reactions of 1,2-dihydroxy-1,2-bis(diethoxyphosphinyl)ethane (DBE) with various diisocyanates, such as tolylene diisocyanate, methylenebis(4-phenylisocyanate), and hexamethylene-1,6-diisocyanate, were studied for the synthesis of phosphorus-containing polyurethanes. In addition, DBE and ethyleneglycol or butanediol-1,4 were copolymerized with the diisocyanates. The synthesized poyurethanes were characterized by Fourier transform-infrared (FT-IR), proton nuclear magnetic resonance spectroscopy (¹H-NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA). Their thermal properties were compared with those of the corresponding common polyurethanes. The fire resistance of the copolyurethanes was evaluated by determining their limiting oxygen index and smoke evolution.     

Linear polyesters containing isocyanurate rings

Two series of linear polyesters containing isocyanurate rings have been prepared to determine the effect of structural variations on thermal and solubility properties. The polyesters were prepared by the polycondensation reaction of isocyanurate containing difunctional acid and ester monomers with linear diols. The substituent on the isocyanurate ring and the length of the acid side chain have been shown to have considerable effect on the glass transition temperature T_g. Different solubility properties were observed for the series of polyesters in which the pendant substituent was ? C₆H₅ and the acid side-chain was ? CH₂CO₂H. These polymers were insoluble in THF, and the polyester prepared from 1,6-hexanediol was also insoluble in chloroform. Thermal gravimetric analysis (TGA) indicated that structural differences had no significant effect on the thermal stability of these linear polyesters.     

Arylidene Polymers. IX. Synthesis,Characterization, and Morphology of New Polyesters of Diarylidenecycloalkanones Containing Thianthrene Units

New polyesters containing thianthrene tetraoxide were synthesized by the interaction of 2,7-dichloroformylthianthrene-5,5′,10, 10′-tetraoxide with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzyiidene)-cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene)cycloheptanone by using the interfacial polycondensation technique. The resulting polyesters were characterized by elemental and spectral analyses. All the synthesized polymers readily dissolved at room temperature in dimethylsulfoxide. The thermal properties of the polymers were evaluated and correlated to their structural units by TGA and DSC measurements. X-ray analysis of polymers showed that all the polyesters are amorphous. Moreover, the morphology of a new high performance polyester, poly[oxycarbonyl-2,7-thianthrene-5,5′,10,10′-tetraox-idecarbonzeoxyl(2-methoxy-p-phenylene)methylidyne(2-oxo-1,3-cyclohexanediylidenemethylidyne)methylidene(3-methoxy-p-phenylene)], has been investigated by scanning electron microscopy.     

Synthesis and thermal characterization of poly(1,3-phenyl octanoate)

Poly(1,3-phenyl octanoate) (polyHPOA) was prepared by melt and solution polycondensation methods from 8-(3-hydroxyphenyl)octanoic acid (HPOA), a novel monomer useful as a chain disruptor in liquid crystalline copolyesters. The melt polycondensation technique gave a polyester of higher inherent viscosity (0.80 dL/g in p-chlorophenol) than that (0.75 and 0.56 dL/g, respectively, for the Ogata method and thionyl chloride/pyridine method in the same solvent) of solution techniques. The solubility of the polyesters was limited to strongly acidic and polar solvents. The polyester was characterized by elemental analysis, IR spectroscopy, WAXD, TGA, isothermal TGA and DTA. x-ray diffraction pattern of the polyesters indicated that it is amorphous in nature. TGA of the polyesters gave a thermal stability of 470°C in nitrogen atmosphere at 50% decomposition. The available thermal data suggest that the polyester undergoes thermal decomposition by a pyrolytic cleavage involving the ester linkage with the formation of ketene and phenol ended groups as intermediates. © 1996 John Wiley & Sons, Inc.     

A non‐phosgene process to homopolycarbonate and copolycarbonates of isosorbide using dimethyl carbonate: Synthesis,characterization, and properties

Poly(isosorbide carbonate) (PIC) was synthesized by melt polycondensation of dimethyl carbonate (DMC) and isosorbide using lithium acetylacetonate (LiAcac) as the catalyst. The reaction conditions were optimized to achieve PIC with relatively high number‐average molecular weight (M_n) of 28,800 g/mol and isosorbide conversion of 95.2%. A series of poly(aliphatic diol‐co‐isosorbide carbonate)s (PAICs) were also synthesized by melt polycondensation of DMC with isosorbide and equimolar amounts of aliphatic diols (1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, and 1,4‐cyclohexane dimethanol) in the presence of LiAcac and the TiO₂/SiO₂‐based catalyst (TSP‐44). PAICs with M_n values ranging from 18,700 to 34,400 g/mol and polydispersities between 1.64 and 1.69 were obtained. The ¹³C NMR analysis revealed the random microstructure of PAICs. The differential scanning calorimetry results demonstrated that all the PAICs were amorphous with a unique T_g ranging from 46 to 88 °C. The dynamic analysis results showed that the incorporation of linear or cyclohexane structure changed the dynamic mechanical properties of PIC drastically. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polyesters,polyurethanes, and epoxy resin derived from 2,2′-(1,4-phenylenedivinylene)bis-5-hydroxypyridine

2,2′-(1,4-Phenylenedivinylene)bis-5-hydroxypyridine (PBHP) was used as a starting material for preparing new polyesters and polyurethanes as well as a diepoxide-bearing styrylpyridine segments. The diesters were prepared by reacting PBHP with terephthaloyl or adipoyl dichloride utilizing the interfacial polycondensation method. The diesters were prepared from the reaction of PBHP with tolylene diisocyanate or methylenebis(4-phenylisocyanate). In addition, a model diester and diurethane were synthesized by reacting PBHP with benzoyl chloride and phenyl isocyanate, respectively. Both model compounds and polymers were characterized by IR and ¹H-NMR spectroscopy, as well as by DTA and TGA. A diepoxide was also prepared from the reaction of PBHP with epichlorohydrin which was polymerized in the presence of 4,4′-diaminodiphenylsulfone. The polyester derived from PBHP and terephthaloyl dichloride was the most thermostable polymer obtained. It was stable in N₂ up to 355°C and afforded an anaerobic char yield of 59% at 800°C. The thermal stabilities of polymers were improved by curing.     

Oxidative NHC-Catalysis as Organocatalytic Platform for the Synthesis of Polyester Oligomers by Step-Growth Polymerization

The application of N-heterocyclic carbene (NHC) catalysis to the polycondensation of diols and dialdehydes under oxidative conditions is herein presented for the synthesis of polyesters using fossil-based (ethylene glycol, phthalaldehydes) and bio-based (furan derivatives, glycerol, isosorbide) monomers. The catalytic dimethyl triazolium/1,8-diazabicyclo[5.4.0]undec-7-ene couple and stoichiometric quinone oxidant afforded polyester oligomers with a number-average molecular weight (M_n) in the range of 1.5–7.8 kg mol⁻¹ as determined by NMR analysis. The synthesis of a higher molecular weight polyester (polyethylene terephthalate, PET) by an NHC-promoted two-step procedure via oligoester intermediates is also illustrated together with the catalyst-controlled preparation of cross-linked or linear polyesters derived from the trifunctional glycerol. The thermal properties (TGA and DSC analyses) of the synthesized oligoesters are also reported.     

Diffusion and reaction in polyester melts

An understanding of the physical and chemical processes involved in the melt polymerization of polyesters in the higher inherent viscosity ranges is of fundamental importance in polyester preparation. For example, the volatile condensation product must diffuse to a polymer–vapor interface before polymerization can take place. Thus, the rate of polymerization of a polyester may be dependent not only upon the chemical kinetics of the polymerization reaction but also upon the diffusion of the condensation product through the polymer melt. The objective of the work presented in this paper was to determine to what degree diffusion or reaction kinetics, or both, limit the melt polycondensation of poly(ethylene terephthalate). Degrees of polymerization in melts between 0.0285 and 0.228 cm in depth at 270°C were measured for various reaction times and were compared with the predictions of mathematical models. The polycondensation rates under these conditions depend upon both the polycondensation rate constant k₁ and the diffusivity D of ethylene glycol through the melt. Estimates of the values to these parameters are: k₁ = 0.0500 (moles/mole of repeat unit)^?1 sec^?1; D = 1.66 × 10^?4 cm²/sec.     

Solvent‐free and nonisocyanate melt transurethane reaction for aliphatic polyurethanes and mechanistic aspects

A novel melt transurethane polycondensation route for polyurethanes under solvent‐free and nonisocyanate condition was developed for soluble and thermally stable aliphatic or aromatic polyurethanes. The new transurethane process was investigated for A + B, A‐A + B, and A‐A + B‐B (A‐urethane and B‐hydroxyl) ‐type condensation reactions, and also monomers bearing primary and secondary urethane or hydroxyl functionalities. The transurethane process was confirmed by ¹H and ¹³C NMR, and molecular weight of the polymers were obtained as M_n = 10–15 × 10³ and M_w = 15–45 × 10³ g/mol. The mechanistic aspects of the melt transurethane process and role of the catalyst were investigated using model reactions, ¹H NMR, and MALDI‐TOF‐MS. The model reactions indicated the occurrence of 97% reaction in the presence of catalyst, whereas its absence gave only less than 2% of the product. The polymer samples were subjected for end‐group analysis using MALDI‐TOF‐MS, which confirms the Ti‐catalyst mediated nonisocyanate pathway in the melt transurethane process. Almost all the polyurethanes were stable up to 280 °C, and the T_g of the polyurethanes can be easily fine‐tuned from ?30 to 120 °C by using appropriate diols in the melt transurethane process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2445–2458, 2008     

Polyesters,polyurethanes and epoxy resins derived from 2,2′-(1,4-phenylenedivinylene)bis-8-hydroxyquinaldine and 6-(4-hydroxystyryl)-3-hydroxypyridine

New polyesters and polyurethanes as well as diepoxides bearing styrylpyridine segments were prepared utilizing 2,2′-(1,4-phenylenedivinylene)bis-8-hydroxyquinaldine (PBHQ) and 6-(4-hydroxystyryl)-3-hydroxypyridine (HSHP) as starting materials. The polyesters were prepared by reacting PBHQ or HSHP with terephthaloyl dichloride in the presence of an acid acceptor utilizing the solution polycondensation method. The polyurethanes were prepared from the reactions of PBHQ and HSHP with tolylene diisocyanate and methylenebis(4-phenylisocyanate). In addition, model diesters and diurethanes were synthesized by reacting PBHQ and HSHP with benzoyl chloride and phenyl isocyanate, respectively. Model compounds and polymers were characterized by FT-IR and ¹H-NMR spectroscopy as well as by DTA and TGA. Diepoxides were also prepared from the reactions of PBHQ and HSHP with epichlorohydrin which were polymerized in the presence of 4,4′-diaminodiphenylsulfone. The polyesters were the most thermostable polymers obtained. After curing at 240°C for 20 h, they were stable in N₂ up to 345–370°C and afforded anaerobic char yields of 65–75% at 800°C. © 1993 John Wiley & Sons, Inc.     

A series of furan‐aromatic polyesters synthesized via direct esterification method based on renewable resources

A series of furan‐aromatic polyesters were successfully synthesized via direct esterification method starting from 2,5‐furandicarboxylic acid, ethylene glycol, 1,3‐propanediol, 1,4‐butanediol, 1,6‐hexanediol, and 1,8‐octanediol and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (¹H NMR), X‐ray diffraction (XRD), differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), tensile tests, and so on. The preliminary evidence clearly showed that direct esterification method was rewarding and worthy to synthesize these furan‐aromatic polyesters. The densities of furan‐aromatic polyesters were ranging from 1.19 to 1.38 kg/m³. The FTIR and ¹H NMR confirmed their expected structures in detail. The results of XRD showed that these furan‐aromatic polyesters were crystalline polyesters. The results of DSC, TGA, DMA, and tensile tests showed that they behaved as thermoplastic polyester, had satisfactory thermal and mechanical properties, and their thermal stabilities were quite similar to that of corresponding benzene‐aromatic polyesters. The results of contact angle measurement showed that they were hydrophilic. The properties above showed that furan‐aromatic polyesters based on renewable resources could be a viable alternative to their successful petrochemical benzene‐aromatic counterpart. Furthermore, they could be used as biopolymer materials according their satisfactory thermal and mechanical properties and hydrophilicity in the future. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Antimicrobial polyesters containing Schiff-base metal complexes

Antimicrobial polyesters containing Schiff-base metal complexes (PSB) were prepared by polycondensation of adipoyl chloride with chelated Schiff-base diol {bis-(2-hydroxy-5-methylol-benzaldehyde)ethylenediamine}. All the metal chelated polyesters were characterized by elemental analysis, UV–Visible, FTIR, ¹³C and ¹H NMR spectra and thermogravimetric analysis. The analytical data of the polyesters agreed with 1 : 1 molar ratio (metal chelated diols to adipoyl chloride). The geometry of the chelated polyesters was confirmed by magnetic susceptibility measurements and UV–Visible spectroscopy. The thermal behaviors of these chelated polyesters were studied by TGA (Thermogravimetric analyzer) in a nitrogen atmosphere up to 800°C. The TGA results revealed that the Cu(II) chelated polyester has better heat resistant properties than the other polyesters. The antimicrobial properties of these polyesters were investigated with agar diffusion methods against selected microorganisms Bacillus subtelillis, Bacillus megaterium, Streptococcus aureus, Escherichia coli, Salmonella typhi, Pseudomonas aeruginosa, Shigella boydii and for antifungal activity against Candida albicans, Trichophyton longifusus, Aspergillus flavus, Aspergillus niger, Fusarium solani, Microsporum canis, Puccinia graminis. The antimicrobial activity of these polyesters was higher than standard drugs Kanamycin and Miconazol.     

Effect of polyester zigzag structure on the phase segregation of polyester-based polyurethanes

Polyester-based polyurethanes were synthesized from 4,4′-methylenebis(phenyl isocyanate) (MDI) with butanediol as a chain extender and low molecular weight polyester–diol as a soft segment. Two polyesters were used in the synthesis of polyurethanes. One of the polyesters was synthesized from adipic acid and 1,6-hexanediol, which had an even number of carbon atoms. The other polyester was synthesized from pimelic acid and 1,5-pentanediol, which had an odd number of carbon atoms. The effect of even carbon monomers and odd carbon monomers of polyester soft segments on the phase segregation of soft and hard segments was studied by DSC (differential scanning calorimetry) and FTIR (Fourier transform infrared spectroscopy). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2095–2104, 1999     

Synthesis and properties of polyesters of isomeric poly(oxynaphthyleneoxy-2-bromoterephthaloyl)s

A series of aromatic polyesters were prepared from 2-bromoterephthalic acid and naphthalenediol isomers. Only the polymers obtained from 1,4-, and 1,5- and 2,6-naphthalenediols were thermotropic nematogens and those from bent naphthalenediols were not liquid crystalline. Only the polyesters derived from 1,4-, 1,5-, and 2,6-naphthalenediols were semicrystalline. The melting temperatures ranged from 319 to 374°C depending on the structure of naphthalenediol moiety. The glass transition temperature, T_g, ranged from 95 to 168°C. TGA studied revealed that the polyesters have fairly good thermal stability     

Synthesis and properties of phosphorus polyesters with systematically altered phosphorus environment

Monomers with phosphorus-containing substituents were incorporated into aromatic-aliphatic polyesters to develop polymeric halogen-free flame retardants as additives for poly(butylene terephthalate) (PBT). They were built into the polyester backbone of PBT substituting 1,4-butane diol as monomer by phosphorus-containing aromatic-aliphatic diols. Starting from 10-(2,5-bis(2-hydroxyethoxy)phenyl)-9,10-dihydro-9-oxa-10-phospha-phenanthrene-10-oxide (DOPO-HQ-GE), the chemical structure of the phosphorus monomers was systematically varied resulting in new polymers with diphenyl phosphine oxide substituents and bridged phosphine oxide units. The polymers were prepared by transesterification polycondensation in the melt in lab-scale as well as in a 2.4 l-autoclave. The properties of the polyesters were determined and compared to the DOPO-based polyester with respect to the achieved molar mass and polydispersity, solid state structure, glass transition temperature, thermal stability and combustion behavior.It was found that the different phosphorus substituents lead to different glass transition temperatures. The polymers containing bridged phosphorus structural units showed higher glass transition temperatures T_g and resulted in higher char yields after thermal decomposition. Both phosphine oxide structures showed only one-step decomposition with a shoulder at the end of the step. In contrast, two separate steps were observed in the polyesters with DOPO-substituents. The results indicated that the phosphorus polyesters under discussion are suitable to adjust the flame retarding mechanism.