Blends of organosilicon polymers with polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)

Blends of organosilicon polymers with polystyrene, PS, and poly(2,6-dimethyl-1,4-phenylene oxide), PPE, were investigated by transmission electron microscopy and differencial scanning calorimetry. Blends with poly(tetramethylsilphenylenesiloxane), PTMPS, showed a morphology characterized by globular domains dispersed in the organic matrix. An apparent homogeneous system was observed when poly(dimethylsilphenylene), PDSP, was mixed with PPE. A crystalline phase was found in samples with a higher PDSP content. The morphology of PS/PDSP blends with low PDSP content showed a dendritic phase dispersed in the PS-rich matrix. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2609–2616, 1997     

Miscible blends of zinc-neutralized sulfonated polystyrene and poly(2,6-dimethyl 1,4-phenylene oxide)

Zinc-neutralized sulfonated polystyrene ionomers (ZnSPS) and poly(2,6-dimethyl 1,4-phenylene oxide) homopolymer (PXE) form miscible blends up to at least 7.8 mol % sulfonation, as measured by thermal and mechanical criteria. The addition of an equal weight of PXE raises the glass transition temperature of ZnSPS by 40–50°C. However, this miscibility is not achieved by eradicating the microdomain structure present in ZnSPS, even though the PXE coils are considerably larger than the spacings between ionic aggregates. Small-angle x-ray scattering indicates that while the average interaggregate spacing is roughly the same in ZnSPS and its 50/50 blend with PXE at a given sulfonation level, the extent of phase separation is reduced upon PXE addition, indicating that more ionic groups are dispersed in the matrix. Factors influencing miscibility in the ZnSPS/PXE materials and related blends are discussed.     

Chemical modification of poly(2,6-dimethyl-1,4-phenylene oxide) by bromination-alkynylation

The chemical modification of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) by bromination of the aromatic ring, followed by displacement of bromine with substituted acetylenes, has been investigated. This pathway leads to a series of novel copolymers containing substituted alkynes on the aromatic ring. The degree of bromination and alkynylation, determined by ¹H-NMR, was in the range of 20–85 and 15–80%, respectively. ¹³C-NMR and FT-IR unambiguously elucidated the structure of the alkynylated polymers. Finally, thermal properties and permeation properties of substituted PPO to carbon dioxide, methane, oxygen, and nitrogen are reported. © 1994 John Wiley & Sons, Inc.     

Electrochemical stability and transformations of fluorinated poly(2,6-dimethyl-1,4-phenylene oxide)

Fluorination of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) leads to narrowing of its window of electrochemical stability in a cathodic range of potentials. It is found this is connected with appearance of both perfluorinated and incompletely fluorinated units in the polymer. The former units are liable to electrochemical reduction (at potentials <−2.0 V) followed by elimination of fluorine anions and the latter react with basic products (generated at potentials <−1.8 V) of electrochemical reduction of the background solution. In the both cases this results in appearance of conjugated multiple bonds in the fluorinated macromolecules. Quantities of these units in fluorinated PPO were determined with a help of direct and indirect electrochemical reductive degradation techniques.     

A novel synthetic method for preparing poly(2,6-dimethyl-1,4-phenylene oxide)/polystyrene alloy in reactor containing aqueous medium

Considering the defect of solution polymerization of 2,6-dimethylphenol (DMP), the low molecular weight of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) synthesized in water and difficulty in processing of PPO, a novel one-pot synthetic method for preparing PPO/PS alloy in reactor containing aqueous medium was proposed based on green chemistry. In the presence of styrene, DMP was polymerized to form PPO, and then styrene was in situ polymerized under the initiation of dibenzoyl peroxide (BPO) and dicumyl peroxide (DCP), finally thermodynamically compatible PPO/PS alloy was prepared. It was found that the introduction of styrene during the oxidative polymerization of DMP could increase the molecular weight of PPO. When styrene content was 50 wt%, for the synthesized PPO/PS alloy the yield and the weight-average molecular weight were determined to be 95% and 1.7 × 10⁵ for PPO, 93% and 2.0 × 10⁵ for PS, respectively.     

Ternary upper-critical-solution-temperature behavior in a blend system comprising poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene

 Upper-critical-solution-temperature (UCST) behavior in a ternary blend of poly(2,6-dimethyl-1,4-phenylene oxide), poly(4-methyl styrene), and polystyrene is reported. The as-cast ternary blend is immiscible at ambient conditions and comprises two different phases, and, however, turns into a miscible system above the “clarity point” ranging from 160 to 300 °C for different ternary compositions. The maximum clarity point is labeled as the UCST for the ternary system, which is about 295 °C. Above the clarity point, the originally immiscible ternary blend turned into one miscible phase. Owing to the thermodynamic UCST behavior and kinetic hindrance, the immiscible ternary polymer blend can be locked into a pseudo-miscible state if it is heated to a temperature above the clarity point followed by a rapid-cooling processing scheme. The quenched ternary blend can remain in a pseudo-miscible state as long as the service temperature does not exceed the glass-transition temperature of the blend. Received: 17 July 2001 Accepted: 3 October 2001     

Miscibility of blends of poly(2,6-dimethyl 1,4-phenylene oxide) with polystyrene-based ionomers and copolymers

Blends of poly(2,6-dimethyl 1,4-phenylene oxide) (PPhO) with the copolymer poly(styrene-co-methacrylic acid) (PS-MAA) and the ionomer poly(styrene-co-sodium methacrylate) (PS-MAA-Na), up to 10 mol% co-unit content, were investigated by dynamic mechanical thermal measurements. The PPhO/PS-MAA-Na blends are compared with PS/PS-MAA-Na blends. The blends of PPhO with PS-MAA are no longer miscible at 10 mol% acid content; this is attributed to a copolymer effect induced by the reduction of PS-PPhO interactions due to the presence of the MAA group which does not interact favorably with PPhO. The blends of PPhO with the ionomer are already immiscible at the lowest ion content studied (2.4 mol%), but become increasingly so as ion content is increased. Despite favorable PS-PPhO interactions, these blends are only a little more miscible than the PS/PS-MAA-Na blends. This is attributed to a combination of the increasing importance of the ionomer cluster phase (from which the homopolymer chains presumably are excluded) as ion content is increased, and of a copolymer effect between the homopolymers and the unclustered phase of the ionomer. These results are compared with published data indicating that blends of PPhO with another biphasic ionomer, zinc sulfonated polystyrene, are miscible. The contrasting behavior is rationalized in part by the suggestion that the copolymer effect between PPhO and the unclustered phase of the latter ionomer, but not of the former, is absent; this is related to multiplet structure and sizes. The analysis made of the above systems is extended to predict what might be the miscibility behavior between PPhO and other PS-based ionomer and related copolymer systems. © 1993 John Wiley & Sons, Inc.     

Effect of styrene-4-vinyl pyridine diblock copolymer on morphological,thermal, and mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether)/polyethylene ionomer blends

The compatibilizing effects of a styrene-4-vinyl pyridine diblock copolymer on the properties of immiscible poly(2,6-dimethyl-1,4-phenylene ether) (PPE)/polyethylene ionomer (Surlyn) blends are investigated by examining the phase morphology and the thermal and mechanical properties. The block copolymer is synthesized by sequential anionic polymerization at ?78°C and melt-mixed with PPE and Surlyn at 290°C. When a small amount of block copolymer is present, the domain size of the dispersed phase becomes smaller. The tensile strength and elongation at break increase with addition of the block copolymer for PPE-rich matrix blends, whereas the tensile strength increases but the elongation at break decreases for Surlyn-rich matrix blends. These effects are interpreted in terms of the interfacial activity and the reinforcing effect of the block copolymer. From the experimental results, it is concluded that the block copolymer plays a role as an effective compatibilizer for PPE/Surlyn blends. © 1994 John Wiley & Sons, Inc.     

Chain orientation in polystyrene/poly(2,6-dimethyl-1,4-phenylene oxide) blends

The differential orientation of polymer chains has been measured in polystyrene (PS)/poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) compatible blends. Density measurements are reported as a function of binary blend composition at 23°C. Drawing was performed by solid-state coextrusion. PS/PPO blend compositions of 90/10 and 75/25 were drawn within sandwiches of polyethylene at 145°C and isotactic polypropylene at 155°C, i.e. at ca. 25°C above the glass transition temperatures of the two blends. The change in Fourier-transform infrared dichroisms on drawing these blends was measured at 906 and 1190 cm^?1, corresponding to predominantly PS and PPO, respectively. The orientation of PS and PPO was observed as a function of draw ratio λ in the range 1–5; orientations increased with λ for both PS and PPO in both blends but to different degrees. Both polymers decreased in orientation with increasing PPO content. Annealing with fixed ends showed that the PPO chains disorient more slowly than those of PS. All binary systems were found to be amorphous and compatible.     

Glass‐formation kinetics of miscible blends of atactic polystyrene and poly(2,6‐dimethyl‐1,4‐phenylene oxide)

We present a detailed investigation of the kinetics associated with the glass transitions of miscible blends composed of atactic polystyrene (a‐PS) and poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO). According to both dynamic mechanical analysis and differential scanning calorimetry, relaxation times displayed an enhanced temperature dependence (i.e., more fragile or more cooperative behavior) for the blends compared with additive behavior based on the responses of neat a‐PS and PPO. This is consistent with the notion that specific interactions between the blend components heighten the intermolecular cooperativity. The compositional dependence of fragility provided insight into physical aging results for the properties of volume and enthalpy. The combination of our research and a previously reported pressure–volume–temperature study by Zoller and Hoehn (J Polym Sci Polym Phys Ed 1982, 20, 1385) provided evidence that the observation of increased glassy densities for the blends compared with those of the pure polymers was kinetic in origin and was not a feature of the thermodynamics of miscibility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2118–2129, 2001     

Preparation of poly(1,4-phenylene)s by electro-oxidative polymerization

The effect of substituents on the electropolymerization of benzene derivatives and the redox properrties of the corresponding polymers were determined using Brown's substituent constants (σ⁺). Electron-donating groups lower the oxidation potential by which increase in the current efficiency was observed. However, stabilization of the produced cation radicals by the electron-donating groups resulted in a decrease in the polymerization efficiency. The appropriate values of σ⁺ for the efficient polymerization ranged near ?1.5.     

Photochemical degradation of blends of polystyrene and poly(2,6 -dimethyl-1,4-phenylene oxide)

Blends of polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide) that cover the entire compositional range have been subjected to the action of singlet oxygen from microwave discharge, dye-sensitized reaction, and photochemical oxidation. With the applied analytical technique, which consisted of infrared (IR) analysis, including ATR technique and a spectroscopic method combined with chemical analysis for hydroperoxide groups, it was not possible to detect any effect of the singlet oxygen treatment. For that reason singlet oxygen does not appear to be important to the initiation of the photooxidation of these blends. In connection with photochemical oxidation the interaction observed between the two components probably involves energy transfer from PS to PPO. This interaction results in the enhancement of reactions in PPO that lead to greater carbonyl group formation and crosslinking. Simultaneously, the probability of chain scission in the PS is lowered with increased PPO content, found by determining the changes in the molecular weights.     

Model reactions for preparing poly(imino-tetrafluoro-1,4-phenylene)

2,3,4,5,6-Pentafluoroformanilide was prepared giving, in addition, two new compounds 4,5,6,7-tetrafluoro-1-pentafluorophenyl-benzimidazole and 2,3,4,5-tetrafluoro-6-[(pentafluorophenyl)amino]formanilide. Sodium 2,3,4,5,6-pentafluoro-formanilide was reacted with hexafluorobenzene in a molar ratio of 1:4 to give oligomers of α-pentafluorophenyl-ω-fluoro-poly(imino-tetrafluoro-1,4-phenylene). Some of the oligomers were isolated. The results indicate that poly(imino-tetrafluoro-1,4-phenylene) could be formed. Model reaction on hexafluorobenzene with sodium acetanilide, molar ratio 1:2, gave a low yield of N,N′-diacetyl-diphenyl-tetrafluoro-1,4-phenylenediamine.     

Crack propagation in poly(2,6-dimethyl-1,4-phenylene oxide), polystyrene,and their blends

Cracks have been propagated in double-cantilever beam specimens of poly(2,6-dimethyl-1,4-phenylene oxide), polystyrene, and their blends. The plane-strain crack propagation energy varies with crack speed, distance from crack arrest following an instability, molecular weight, and blend composition. Auxiliary measurements of moduli, yield properties, and craze initiation resistances at crack tips were carried out together with microscopic studies of the crack-tip plastic zone. Fracture instabilities are rationalized in terms of the interplay of shear deformation with crazing in the crack-tip plastic zone. Negative deviations from ideal behavior in the crack propagation resistance of the blends are rationalized in terms of the concurrent negative deviation in crazing resistance which in turn is thought to be related to positive deviations in shear resistance and thus to negative volumes and heats of mixing.     

Polymer-Polymer interactions via analog calorimetry. 1—blends of polystyrene with poly(2,6-dimethyl-1,4-phenylene oxide)

Analog calorimetry is used as a tool to study the interaction of polystyrene, PS, with poly(2,6-dimethyl-1,4-phenylene oxide), PPO, and with poly(1,4-phenylene oxide). Electrostatic charge calculations were used as a guide to divide polymer repeat units and analogs into groups. A mean-field binary interaction model was used to cvaluate group interaction energies. The enthalpic interaction energy for the blend of PS-PPO obtained from this study is −1.35 ± 0.19 cal/cm₃, which is in good agreement with values obtained from neutron scattering. The results indicate that electronic rearrangements between the phenyl ring and substituted methyl groups in PPO have a large influence on the interaction with polystyrene. © 1996 John Wiley & Sons, Inc.     

Phase behavior in copolymer blends of poly (p-chlorostyrene-co-o-chlorostyrene) and phenylsulfonylated poly (2,6-dimethyl-1,4-phenylene oxide)

The miscibility of random copolymers of o-chlorostyrene and p-chlorostyrene [P (oClSt-co-pClSt)] with partially phenylsulfonylated poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO) copolymers has been studied, using differential scanning calorimetry (DSC) to establish T_g behavior. It already has been established that the isomeric effect of the chlorine substitution on miscibility is large. Thus the para-chloro-substituted styrenic homopolymer is miscible with all SPPOs containing more than ～ 5 mol % phenylsulfonylation, whereas the ortho-chloro-substituted homopolymer is immiscible with the entire range of SPPO copolymer compositions (and also with the respective homopolymers). As a result of this asymmetric behavior of the homopolymers, the width of the window of miscibility in blends now investigated containing copolymers with high pClSt content and SPPO is much greater than in the corresponding blends containing copolymers with large mole fraction of oClSt. These differences are reflected in the corresponding χ parameters calculated from analysis of the data. It was also found that the miscibility is temperature dependent and that the regime in the copolymer-copolymer composition plane shrank as the equilibrium temperature increased, results indicative of LCST behavior. © 1994 John Wiley & Sons, Inc.     

Tailored polymer electrets based on poly(2,6-dimethyl-1,4-phenylene ether) and its blends with polystyrene

Due to the establishment of common thermoplastics such as polyethylene, polypropylene and polytetrafluoroethylene as substrates for modern electrets, research in this field has seen significant progress in recent decades. However, there still is a need for new substrate materials in order to boost modern-day electret applications. Important targets for a further development are electret substrates with a tailored balance between cost and performance especially at elevated temperatures. In this study, experimental results concerning the charge storage behaviour of poly(2,6-dimethyl-1,4-phenylene ether) (PPE) films and its blends with polystyrene (PS) are presented. As demonstrated, the good electret performance of neat PPE can be further enhanced by the addition of suitable weight fractions of PS, a synergistic electret behaviour that is related to morphological blend parameters such as the packaging density and the presence of PS micro-heterogeneities in the PPE/PS matrix. Most importantly, the results highlighted in this study clearly demonstrate the potential of blending as a promising approach towards satisfying the demands of tomorrows’ electret applications.     

Pressure-volume-temperature properties of blends of poly(2,6-dimethyl-1,4-phenylene ether) with polystyrene

The pressure-volume-temperature (PVT) properties of blends of poly(2,6-dimethyl-1,4-phenylene ether) (PPO) with polystyrene (PS) have been studied experimentally in both the glassy and melt states at 0, 20, 40, 50, 60, 80, and 100% PPO content. In all compositions a strong glass transition was observed varying linearly with composition. For all but the 40% PPO composition this was the only transition, indicating molecular compatibility of the components in these blends. The 40% PPO composition showed a very weak second transition near the glass transition of pure PS. A small amount of phase separation may have occurred in this blend. The data for the glassy and melt states were fitted to an empirical equation of state based on the Tait equation. The volume of the melts at constant pressure and temperature showed a virtually linear dependence on composition. Any negative excess volume of mixing compatible with the data would have to be very small, smaller than expected from previous measurements in the glassy state. Various properties relating to the glassy and melt states and to the glass transition were evaluated and are discussed as a function of composition. It was found that most properties of the glasses could not be modeled by simple functions of composition.